The Forms LAF Project - Gradient Color for Tab Canvases

Hi,
I have the following two issues.
1. It appears that the Gradient Color works only for the first Tab.
The rest of the tabs are not changed.
1.1 I can see some delays during the 'coloring' process. Basically I can see the original color and then the Gradient color being applied.
2. I can also observe the original color around the tabs. Not all canvas is colored.
This is also is visible in a doc images in a white paper.
Please advise.
Thanks,
Michael

Hello,
This is true that the Forms standard Java function used to set the background color of the unselected tabs does not make the job, and I do not know why (no action and no error). I think that it could come from the colorscheme selected.
Secondly, the delay comes from the fact that the tab is painted after the Forms standard process.
In fact, it is not always possible to overwrite all the Forms standard behaviours, I'm affraid.
Francois

Similar Messages

What is the form name (SAP script name ) for KO02 output .

Hai ,
what is the form name (SAP script name ) for KO02 output . and also pl guide how to customize that.
thank u in advance

spro---->controlling ->internal Order->Order Master Data----> Prepare Output and see the documentation of this.
Regards
Peram

Can somebody the form to put a password for open a document please

can somebody the form to put a password for open a document please, I try to put security but appear this error "the document can not to file. trouble reading the document (14)"

Hi there,
If I understand correctly, you're trying to convert a file but can't because it's password protected? If so, the only way around that is to remove the password protection (which would require knowing the password).
If I misunderstood your question, please let us know.
Best,
Sara

I'm unable to clear my search history after many attempts with the firefox instructions as I'm unable to check the "Form and Search History" box for some reason

I've tried several times to clear my search history without any success. I've been able to do so in the past, but this is the first time I've tried in a while and for some reason it will not let me check the box for "Form and Search History." Then sometimes it will let me check that box, but when I click "ok" to apply the clearing of the search history, nothing happens and it still remembers all my sites. At that point I try to clear it again and its back to not letting me check the "Form and Search history" box (I've gone through this cycle a few times). I tried looking through some of suggested articles that Firefox sent me too, but I don't know much about computers and just doing the things they seem talking about isn't working either. Please help, thanks!

It seems to have worked itself out. Thanks anyway!

After downloading 4.0 on my Windows XP Firefox continues to work as before but none of the new features is available except for tabs on top. Where are the new features?

Mozilla Firefox Installation Started: 2011-05-01 17:51:37
Installation Details
Install Dir: C:\Program Files\Mozilla Firefox
Locale : en-US
App Version: 4.0.1
GRE Version: 2.0.1
OS Name : Windows XP
Target CPU : x86
==========================================
The next time I started Firefox, the tabs were at the top but none of the other advertised new features for 4.0 have ever appeared, such as the Firefox button, ability to group tabs, etc. I even downloaded 4.0 two times, with the same result both times. I would really like to be able to use the new features. Thank you for your help.

See [[What are Tab Groups?]]
Other things you can do: 
* Right click a blank part of the tab bar and click "Tabs on top" to remove the checkmark. Tabs will subsequently reappear below the search bar. 
* Repeat the same steps, but click the top one called "Menu bar". This will reinstate the text links at the top. If you already have these, reverse the procedure to get the orange Firefox button 
* To rearrange the layout, repeat the same steps again and choose "Customize". A panel will open and while that remains onscreen, you can move elements like toolbars, buttons etc around and place them anywhere you wish. You can also drag anything you don't like into that panel and add anything you want by dragging it out of there. 
* To replace the status bar at the foot of the page, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/ 
See also: https://support.mozilla.com/en-US/home

How to change the Form field in Outlook 2011 for Mac ?

Hey,
I have Outlook 2011 on my Mac, and using Exchngae server 2008 for my emails.
In the exchnage server I have few differnet domain whic I use,
In Microsoft Outllok I just can add the "Form" filed and change the email from whom I send,
How can I define this in Outlook 2011 for Mac ?
Thanks.

Go into the List Advanced Settings, select Allow Management of Content Types.
Go back to the List Settings, and go into the Content Type (e.g. Item). In the Content Type, click on Title, what is selected there? If it is not Optional, then do so and save the settings.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to find the RGB Values of a Color for Hyperion

When customizing your Hyperion forms, we come across situations where we need the exact RGB value of a given color. This article explains a simple technique to find the RGB values using MS Paint and the Calculator applications that come as standard applications with your operating system.
Here are the steps to find the exact RGB value of a given color.
1) View your Hyperion form using IE, scroll down until you see the color you want to find the RGB value and press the "Print Screen" button (in your keyboard).
2) Open MS Paint and click Edit -> Paste or simply Ctrl+V. What you saw in the browser will be copied as a new untitled image.
3) Select the Color Picker tool and click on an area that has the color you want to match.
4) Now go to Edit Colors... option and click on the "Define Custom Colors >>" button. The color you picked will be selected on this palette. At the bottom right hand corner you will see the Red, Green and Blue values you need. Note down the R,G,B values (given in decimal).
5) Now we need to find out the hexa-decimal values that correspond to those decimal values. This is where we use the simple Calculator. Open the Calculator application from Program -> Accessories. Switch to the scientific mode by clicking View ->Scientific.
6) By default it will be in the decimal number mode. Enter the R value (238 in this example) and click on the Hex radio button. The corresponding hexa-decimal value (EE in this case) will be shown in the dial.
The selected color in this case has the same value for R, G and B. (In fact, all shades of gray has the same values for R, G and B.) Therefore, the RGB value of the background color that we need is #eeeeee. Repeat step 6 to find out the hex value for the Green and Blue elements, if they are different.
Tip:
If you find it difficult to pick a color, zoom the image by pressing Ctrl+PageDown or using View -> Zoom -> Custom... option.

These tips are to find the RGB color of HFM default row where row is text and text lines in data columns are also visible to business users as Yellow as an input cell. By applying the same RGB color you can apply the same color to your data cells or rows. This post shows how to identify color from any web view-able object.
Regards,
Manaf

Setting up the correct custom project size size for keynote presentation in FCP 7 or motion?

Hi...anyone else do this?
I have been creating and editing films in FCP (not X) for years now and have got into creating the whole presentation for clients awards ceremonies etc. via Keynote on my iPad via HDMI to HD projectors and it looks amazing and is seamless on the night. No need for crappy powerpoint slides and jumping to low res DVD films - its all controlled via my iPad.
But i want to up the creativity of the presentations - at the moment we import the films as mp4 HD QT files and jpegs of the speakers/nominees/titles screens etc. created in Photoshop and put the whole thing together in Keynote on my iPad. It worked a treat and my clients love it!
Now i had a thought and did a test and created Motion graphics versions of the speakers titles and nominees screens in Apple Motion - so that they had an animated section at the start with whoosh audio stingers as they are played and not just stills - and then export them as QT files - import to FCP 7 timeline and export to compresser ready to convert to mp4 for Keynote.
This way i can extend the static part of the screen after the motion graphic part to say 10 mins as i never know how long the speaker will be on stage.
Then when the speaker moves on the next item i can hit the ipad which will move to the next presentaion screen!
Q. Now ive been doing these as HD 16:9 screens - but when imported to Keynote I have a white band top and bottom on the screen so i really need to start with a template screen size of 1024 x 768 for Keynote and also keep this size in FCP 7! And also export to Quicktime as the same size.
When i do static jpegs to import into Keynote i just define the pixel canvas size - 1024 x 768 @ 300dpi in Photoshop and it works fine but im not sure what to do in Motion or PCP as I have always created my films in 16:9 HD widescreen preset!
Anyone else doing this and got a solution to my problem and can help with custom project sizes in motion and FCP 7!

1024x768 is 4x3. 2048x1536 is 4x3. Both of these are current display dimensions for iPads 1-3.
HD video (1920x1080 or 1280x720) is a 16x9 aspect ratio.
Try putting a rectangle in a square. Unless you scale the retangle up and lose image on the sides you will not be able to properly fill the entire 4x3 display area. The easy compromise is letterboxing to ensure all of the rectangle is display in the square. The iPad is doing this with very little effort on your part.
In FC you can create a new sequence and go into the settings and customize it to 1024x768, 2048x1536 or
just about any other dimension. Even If you create a custom sequence at 1024 or 2048 in FC you will see the same results that the iPad is giving you with much less effort, render and conversion time (presuming your keynote workspace cannot change in dimensions or aspect ratio and you are unwilling to crop your 16x9 aspect ratio video to fill the space.)

Set control border color for tabbing

Is there a way to set the color of the border when tabbing through controls? Right now I have a darker background so it doesn't do much good to be tabbing through enum and ring dropdowns when you can't tell which is selected because the border is black.
CLA, LabVIEW Versions 2010-2013

Here is a post that talks about how to hide the key focus:
http://forums.ni.com/t5/LabVIEW/How-do-I-get-rid-of-the-Key-Focus-object-border/m-p/844383
Maybe Label.TextColor can be changed when the focus is on the numeric control or blink the control.
Jst some ideas until border color change is provided in LV.
CLD,CTD

How can I change the default fill and stroke colors for new shapes?

As you can see in the following screen recording, after I change the stroke and fill color, all my subsequent rectangles are created respecting these new colors. But then when I delete all the rectangles, choose the rectangle shape tool once again, and start creating new rectangles, they start getting created with another color I had used some time ago (and I don't know how did it become the default color).
http://tinypic.com/r/64jrwp/6
So how can I change the defaults, so that the fill color is say #ddd, and the shape has no stroke at all?
Thanks.

When you have the shape tool selected you will see in the tool bar below - file edit etc a fill and stroke. This is where you can change the colours.
You can keep drawing your shapes like you did in the video but then select the rectangle and change the colour from this tool bar. The reason it changes will be because you changed the colours you were using (foreground / background) that display in the left side tool bar.

The records in the form are not updated during for newly created records

Hi,
I am new in using BIP which is integrated with Siebel. I am using a Data Template. My issue is, when I create new records, they are not included when I generate reports. Thus, these new records exists in back-end but not displayed in BIP.
Anyone who can help me please?
Many Thanks in advance.
Cheers,
Ann

check whether in the report, you enable the user document cache option, remove that.

How to populate the form bean object for multiselect box in struts

hi, i am using two multi select boxes,one to populate the data by getting from the data base and another to fill the items selected from the first select box to store the values in the database..i need the information (how to declare the select boxes and how to write the form bean getters and setters for this one.) regarding this..

http://forum.java.sun.com/thread.jspa?threadID=5147813&messageID=9553925#9553925

Can I setup username(s) and password(s) for accessing the form?

Dear all,
As the title states, is it possible to restrict the form access to certain people by setting up usernames and passwords?
If not, what would be a suitable (and similar) alternative to using quick reporting forms in a company environment that would allow trend analysis?

Thank you for your response,
True as it may, I don't want anyone accessing the form except those authorized. For example, even though the form access can be limited by controlling the dirstribution of a URL, a quick google search of "incident report formscentral" produces a link to the Columbus School District Bully Incident Reporting Form on the first page of results!
In order to limit access, is it possible to Only embed the form on other websites (ones that require authentication), or to only use the PDF version of the form, allowing it to upload the data to formscentral?

Set-up custom font, font size, and color for writing new and reply e-mails in Thunderbird

I know that I can select the font, size, and color for writing each new and reply e-mails in Thunderbird, but I don't want to have to do this each time. I want to set-up the default font, size, and color for all new and reply e-mails. It already comes up with a default one, but I want to change it, but can't figure out how to do this. I'm sure it is quite simple, but I don't know how to do this. Thank you in advance for help.

Tools > Options > Display > Formatting tab
Default font: select font
Select size : eg; 14
Click on 'Advanced' button and set all the sizes to 14
Select : 'allow messages to use other fonts'
click on OK
Click on 'Composition'
Under the 'General' tab
Suggest you set HTML font to 'Variable width' and Size : 'Medium'
Select the 'Text colour' you would like to compose email using
Select the 'Background colour' you would like to use when composing emails.
click on OK to save all changes.
This will set the display email list to the selected font.
It will allow received emails to use the font the sender used.
When you compose an email it will also use the same font settings.
The message 'Display' settings in the above section also apply to messages that you compose. The settings are not sent, so they do not affect how your messages appear to recipients.
The settings in the ''Composition' section can affect how messages are sent. If you make unusual choices, then people who receive messages from you might find them difficult or impossible to read. Hence, why I suggest you leave it as 'Variable width' and allow the 'Display' settings to set the default used for composing emails.
More info:
* http://kb.mozillazine.org/Font_settings_in_Thunderbird

Problem changing gradient color in Numbers

Has anyone else had a problem with being able to change the gradient colors for several rows and then not being able to change the gradient color? I set the gradient to go from snow to sky and then I decided to change some rows so the gradient went from snow to lavendar but the color won't change from sky. I can change snow to different colors; but I can't change the sky to any other color.
If I open a new Numbers file, then I CAN change the gradient colors. I tried saving, closing, and re-opening my file but that doesn't seem to fix it. If I copy the cells and paste them into a new, empty file, I can change the gradient colors.
Any ideas? I have a workaround so it isn't critical but I've got a lot of color coding to do and don't want to keep pasting my table into new files when this happens again.
Thanks!
Tina

KOENIG Yvan wrote:
What is the meaning of the small grey triangle at the top-right corner of the colored rectangle just above the Image menu in the Colrs pane?
A very good question! From what I can tell, it indicates that the displayed color is taken from the 'device' color profile, or at least relates to that profile in some way. There doesn't seem to be any way to choose directly from the list of available profiles from the spectrum image palette shown in your example, but if you switch to the color sliders mode, you will see a small square icon next to the slider type popup, which is itself a popup list of profiles.
One of those profiles will be a device profile (for instance "Device CMYK" if the CMYK sliders are displayed), & it seems that any color chosen when that (& only that?) profile is selected will display the grey triangle.
From what I can tell, the profile chosen from this popup sometimes remains in effect, & sometimes not, when switching among the color choosing modes. For the spectrum mode, it appears that most of the spectrum is in the device profile's space ... or something like that.
I really don't understand any of this very well!

The Forms LAF Project - Gradient Color for Tab Canvases

Similar Messages

Maybe you are looking for