The FP custom create tag VI. shows an error code 32830 when i am runniing my aplication.
what does it mean and how to solve? I seem to be having problems talking to the FP-1000. I generated a .iak file using FeildPoint Explorer V3.01 with no problems I can talked and get readings from my FP-AI-100 using the Explorer software but not any of the LabVIEW VI's, also i have generated the FP custom create tag without problems, but it shows code error 32830 when i am running the aplication.
Omar,
There is a limitation of how many programs can access a serial port at the same time. When FieldPoint Explorer is open, LabVIEW will not be allowed to use the serial port. Thus, if you close FieldPoint Explorer, you should be able to run your LabVIEW program and not get the 32830 error.
Regards,
Aaron
Similar Messages
-
Since installing the latest update my mother-in-law gets Error Code VM502 when sending to only 6 recipients. This didn't happen before the update.
The error came from your providers server. You need to ask them why they are setting limits.
Thunderbird does not have any limits. -
Custom Create tag error when VI is compiled
MY vi runs fine in development mode but generates a custom create tag error - 33164 when running the compiled version
The VI was developed with LabView 6.0.2 and we are using Fieldpoint explorer version 3.0.1.
The VI worked fine but we were having problems with our FP-1600 because it could not maintain an Ethernet connection.
NI sent us a new FP-1601 and the ethernet design flaws of the FP-1600 were no longer causing us problems.
Power was cycled on the system a day or so after that and ever since then the compiled version of the same VI will generate the afore mentioned error code, but the VI works when run in debugger/development mode. Re compiled, re-installed FP explorer, re imported fieldpoint tags; None of these worked. -
For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone
mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR -
Could not complete the define custom shape command because of program error
I am using the pen tool to draw a shape and then select it to create a custom shape. I use path: edit - define custom shape = "could not complete the define custom shape command because of program error"
The error message appears once I click the define button.Also, I solved this another way, seems to happen to me often. I click on the path panel, near layers panel and clicked on 'load path as a selection' (3rd icon on bottom from left), then click 'make work path from selection' (4th icon on bottom from left). Then you will see that the whole work area is part of the selection, including your desired shape/path. In order to change this, just select 'path selection' tool and highlight each corner and delete each point from each corner, then you are left with the desired selection to create a shape. I am self taught and this seem unorthodox, but it works.
-
I am using Iphoto 6 to create a slide show but my music stops when it supposed to loop?
I am using Iphoto 6 to create a slide show but my music stops when it supposed to loop?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.
download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Today, all laptops in the house (latest ver of FF) began throwing the error:
(Error code: ssl_error_rx_record_too_long)
When trying to access any Google products: gmail, Google+, analytics, Google website, etcAha! I'm in South Surrey, BC. I've got a call into a Shaw tech.
-
I get this error when installing VS 2015 Community RC. I'm installing on Windows 10 build 10074. I tried uninstalling VS and tried performing the steps from other known issues... Change > Custom > Select feature > Update.
I also get the other errors as well...
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294Same issue here, on a Surface Pro 3.
I've tried all I can think of, including a full reinstall of the OS (10074). Basically it always fails with the errors below.
Launching VS I do have the UAP templates installed, but not the emulators. I can create a new Windows Universal app no problem, however it shows up as a Windows 8.1 type in the properties pane. Missing lots of references so obviously nothing builds.
Tried installing the tools separately (the ones linked by Paul Chapman in a separate thread). These installed fine, and gave me the emulators (at least in the drop down, haven't been able to verify they work as nothing else works). Proceeded to "repair"
the VS install after this and at that point the install completed without errors, however nothing still works inside VS. Then proceeded to "modify" and remove any Universal app stuff, rebooted and reinstalled, only to get the same error again and
back at square one.
Tried, as far as I can remember, fresh installs from both the ISO and webinstaller (as there was some talk about the ISO containing older code and missing some tools).
Spent a week trying to get a Win10 rig up now, to no avail. Previous builds (with CTP6) would give me a UAP mobile install error, which seemed linked to Hyper-V not working, however Hyper-V was working just fine...
Oh, and obviously - No, I did not cancel the install myself.
Here are some relevant lines from the install log,
[060C:0CF0][2015-04-30T14:20:08]i000: MUX: Source confirmed
[060C:1994][2015-04-30T14:20:14]i000: MUX: Finished connecting secondary installer pipe
[060C:14D4][2015-04-30T14:20:19]i000: MUX: Updating secondary installer progress display name: Windows 10 SDK 10.0.10069
[060C:14D4][2015-04-30T14:20:25]i000: MUX: Updating secondary installer progress display name: Tools for Windows 10 Universal Apps (Windows SDK 10.0.10069)
[060C:044C][2015-04-30T14:28:13]i000: MUX: ExecuteError: Package (VSSecondaryInstaller_box) failed: Error Message Id: 1603 ErrorMessage: Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Process returned error: 0x80048646
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to execute EXE package.
[060C:044C][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to configure per-machine EXE package.
[060C:044C][2015-04-30T14:28:48]i000: MUX: Installation size in bytes for package: VSSecondaryInstaller_box MaxAppDrive: 0 MaxSysDrive: 2063301632 AppDrive: 0 SysDrive: 2060471296
[060C:044C][2015-04-30T14:28:48]i000: MUX: ExecutePackageComplete for secondary installer
[060C:044C][2015-04-30T14:28:48]i000: MUX: Disconnecting secondary installer pipe
[060C:044C][2015-04-30T14:28:48]i000: MUX: Return Code:0x80048646 Msi Messages:Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294 Result Detail:0 Restart:None
[060C:044C][2015-04-30T14:28:48]i000: MUX: Set Result: Return Code=-2147187130 (0x80048646), Error Message=Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294, Result Detail=, Vital=False, Package
Action=Install, Package Id=VSSecondaryInstaller_box
[060C:044C][2015-04-30T14:28:48]i000: Setting string variable 'BundleResult' to value '0'
[060C:044C][2015-04-30T14:28:48]w350: Applied non-vital package: VSSecondaryInstaller_box, encountered error: 0x80048646. Continuing...
Think I'll go buy a Mac... -
I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O. I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name: Application
Source: MSDPM
Date: 6/13/2011 1:09:12 AM
Event ID: 4223
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSDPM" />
<EventID Qualifiers="0">4223</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
<EventRecordID>68785</EventRecordID>
<Channel>Application</Channel>
<Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
<Security />
</System>
<EventData>
<Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
<Binary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inary>
</EventData>
</Event>
Any help would be greatly appreciated!Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress. -
Linked Server to Access Database in SQL Server 2012 is working perfectly.But, All of sudden it is showing SQL Error Code:7303
Unable to connect to the database type that is created with earlier versions type. But the same Linked Server in another SQL Server instance is working perfectly. I am unable to rectify what is the problem please help.All of sudden it is showing SQL Error Code:7303
Error 7303 = "Cannot initialize the data source object of OLE DB provider "%ls" for linked server "%ls"."?
Check the data Provider on the machine, e.g. using ODBC Admin by creating a DSN
Olaf Helper
Hi Olaf Helper,
I don't now how to add a DSN for the Access Database using ODBC Admin. Can you Please help me with that one. as the solution to above problem i Have added a startup parameter -g512 to SQL Server is it effects my existing Assemblies in SQL Server. I am replacing
the startup parameter as -g500 to -g512 here.
Thank you
Regards,
AyubKhan M -
Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
ShamilHi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
My ipod classic 80gb shows an error code 1439 can it be fixed
my ipod classic 80gb shows an error code 1439 can it be fixed or can anyone help please.
Hey there tomhanson
How are you?
Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
I did the following:
My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
Finally, after the file extraction was done, it began to restore the iPod!!
I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
If it works for you, make sure to share the tip!!
Kind regards
Salvador Rivera -
Why is showing an error of 3194 when i try to restored my phone
why is showing an error of 3194 when i try to restored my iphone
http://support.apple.com/kb/TS3694#error3194
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Maybe you are looking for
-
I need to get a new hard drive for the g56..
the one thats in it has a error code 301 and i cant boot it. This is only 16 months old and its only been used about 10 times.
-
How do you see how much usage your music is using up on iTunes?
I don't know how to see how much usgae my music is taking up on my iTunes. Please help?
-
Hi, My 92 day old iMac has just developed a thin (1 pixel wide I think) blue line about 3" from the left of the display. It comes and goes and crosses all windows. Has anyone else had a problem like this or have any ideas what's causing it? Cheers Al
-
Half Day LOP / Unpaid Absence not working for payroll india
Dear Gurus, I have created Unpaid leave which is working correctly when we maintain full day absence in infotype 2001. But it is not working for partial absence ie, half day. I would really appreciate if you help me out on this issue. Thanks, Rajesh
-
RealPlayer best to download and save online videos
I want to download a video clip from the BBC news website (archive, not iPlayer). Is RealPlayer the best, and if so, which version : SP for Mac, Downloader, Converter, Download Agent. All are talked about eg in CNET Editors' review. Very confusing !