The frozen average base for absence is always recalculated

Hello,
I can't understand why the system in my configuration still recalculates average base for an absence which is set as frozen for the beginning day of the absense.
A person had the leave from 130809 till 030909; so the leave was divided for payroll into 2 parts - first: 130809 - 310809 for first payroll period; second: 010909 - 030909 for second. The first payroll period was calculated right; the averafe for the leave was set and frozed.
The second payroll period was calculated uncorrectly - the wage for second part of the leave was recalculated using another average base; so the frozing option doesn't work as I expected.
In the configuration the average for the leaves are calculating using data from the current month and 2 months before; so may be this kind of solution works no so good?
Earlier, I had no experiences with the frozed averages.
So, can anybody help me to analyse and solve this problem?
My best regards,
Ireneusz

Check your trackpad settings or call Apple tech support since your computer is "new." Take advantage of your warranty before it runs out.
Intel-based Apple Portables: Troubleshooting unresponsive trackpad issues

Similar Messages

Why are the NI-DAQmx Base for LabVIEW options grayed out using custom install (with Action:Skip)?

I'm trying to install NI-DAQmx Base 3.7.0 for LabVIEW 2013 (LV is installed). When I try Standard Install, it doesn't install for LabVIEW (only the Common and C and USB tools), but gives a successful installation message.
When I try Custom Install, all of the "...for LabVIEW 20XX" options are unchecked, grayed out and the Action says "Skip".
I'm trying this on a 2011 MacBook Air 11" running OS 10.9. LabVIEW runs fine.
Thanks for any suggestions.
Solved!
Go to Solution.

Hi,
OS 10.9 is not officially supported by NI with the DAQmx Base 3.7. This information is from the description of the driver (http://www.ni.com/download/ni-daqmx-base-3.7/4272/en/):
OS Support—NI-DAQmx Base now supports the following versions of Mac OS X:
Mac OS X 10.7 (Lion)
Mac OS X 10.8 (Mountain Lion)
So this seems to the be the problem. Either you choose another OS version or wait for a new driver which supports 10.9
Regards,
Michael

Moving Average Price for Sales stock and Project stock of a material

Hiya Gurus,
                 I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                 In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                Kindly help me on this, it would be deeply appreciated.
Cheers,
ZIa

Hi
can you look at tables
EBEW                             Sales Order Stock Valuation
QBEW                             Project Stock Valuation
Nat

Moving Average Price for Batch Maintenance

Hi Experts,
      I've created material of which stock is maintain in batch (Valuation category = X & Price Control = V).
    Due to batch wise stock, system calculates the moving average price for different batches.
    Can we calculate moving average price at plant level inspite of maintaining material batch wise?
   Is there any other way by defining multiple storage bins for that material so that I can see the stock value differently with single moving average price value?
   Thanks.
                                               Naimish.

In MM03, you get the overall MAP for all batches of the material at plant level without mentioning valuation type in org. level. When specific valuation type is given, you can see its MAP / std price.
Hope this clears the doubt.
Regards,
SAmeer

Which table has Moving Average price for a material

Can you let me know from which table I can get the Moving Average Price for a material
Thanks

Found MBEW table which has the necessary information

Change field labels for Absence Notification

Hi Folks,
I wonder how can I change a standard label for fields in absence notification window of ESS.
For instance, the standard spanish translation for "Absence Type" is "Clase de Vacaciones" and the client want it to be "Tipo de Ausencia".
How can I achive that?
[Sample Image|http://twitpic.com/2989fq]
I've been searching the forum but couldn't find the answer.
Thanks
Ivan
Edited by: Ivan Milkovic on Jul 27, 2010 4:04 PM

Thanks Vivek, your answer was very helpful, however that's only to change the application description that goes in ESS overview screen, i want to change the labels that appear within the webdynpro application.
For intance, change the label "Absense Type" by "Type" only.
<a href="http://www.imagehousing.com/image/521385">Photo Image</a>

ITunes closed and the songs i payed for were gone!

A message popped up and said "an error occured an iTunes needs to close. We are sorry for any inconvinience."
How do i get my songs back?

Tman65,
First thing I'd do is go to the iTunes Store menu > Check for Purchases option.
If that doesn't work, look over your hard drive and see if you are able to find the lost download. Have a look at this article in the Apple Knowledge Base for some tips on how to do so.
If you're not able to find the file, follow the directions for I paid for music that didn't download completely on this Support page .

Abnormal increase in the oracle data base of XI dev

Hi Experts,
The size of the oracle data base for SAP-XI is increased by 9% abnormally in 1 day, where as 1% increase in the oracle data base size normally takes 1 to 2 weeks.
What could be the problem? Please give me some links or some idea how to check to know what causes this problem.
Thnx
Subbu

Hi Rama
You should look out for big tables. You can do this in transaction DB02 -> Detailed Analysis -> Size / Kbyte > 100000
This will give you all segments larger than 100mb. In an XI system the messages are stored in table XI_AF_MSG. It is also possible that your largest segment is a lob segment. You will then see something like SYS_LOB0000039303C00020$$.
To see which table it is just use this SQL:
[code]SQL> select table_name from dba_lobs where SEGMENT_NAME = 'SYS_LOB0000039303C00020$$';
TABLE_NAME
XI_AF_MSG[/code]
In DB02 you can also select the segment and view its history to make sure it is responsible for the database growth.
Best regards, Michael

Where can I find the moving average value of Project stock

Dear All
All my company stock is project stock. For all my Goods Issues with 221 Q, system takes the moving average value for that consumption posting. Where this moving average value can be found?
Other than MBBS, is there anything else?
Thanks
Edited by: srini v on Dec 12, 2009 12:48 PM

Hi,
Try MM60
Regards,
Pardeep Malik

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

"Calculate Average" option for the Activity Usage Profile doesn't work

I have the same problem as poster 793128 in a comment for a different thread: the "calculate average" profile option doesn't work for units (it works for cost though). I've used this option a lot on previous versions of Primavera but for some reason is not working on our new P6 release 7 (stand alone). As 793128’s post says: nothing happens, nothing changes, the profile keep showing totals, doesn't matter if the "base hours on time period" box is selected or if the divider is input by the user.
The same option (calculate average / divide by) on the resource usage spreadsheet and on the tabular reports do work as expected so doesn't seem to be that I checked the wrong box for some user or administrator preference set up.
Thank you for any help or clue. I posted this as a different thread because my original post was in a resource profile thread for a different issue that was already answered.

*793365,*
After reading your post I tested an older layout of mine that uses a similar setup and it still operates fine. On the "Resource Usage Profile Options" box under the "Graph" tab, I have "Calculate Average" checked and "24" entered in the "Divide interval totals by:" box.
This allows my resource profile to display manhours per day for me.
Some of my background info:
I run in a multi-users platform and not in a stand alone setup.
We have different resources loaded into the schedule with multiple calendars.
I have several "Resource Filter/Group Names" setup for each separate resource on the "Data" tab too.
Hope this helps,

Understand the technical base for Enterprise Services?

Hi all,
I am trying to understand what is the technical base for enterprise services and the restrictions when activating them. The best documents I have found are:
Note 1566412 u2013 Enhancement package 6 for SAP ERP 6.0.
Note 1359215 u2013 Technical prerequisites for using enterprise services
sdn blog u201CDetermin the SOA readiness of your System with the ES Workplace (Part 1 and 2)
EHP Master Guide - https://websmp107.sap-ag.de/~sapidb/011000358700001183052011E
The documents are quite informative, however there are still questions. Maybe someone can shed some light of these:
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
a. An EHP (with relation to a business function).
b. The swc u201CESA ECC-SE 60xu201D (without relation to a business function). E.G. ES Bundle "Bank Communication Management".
c. The SWC u201CSAP APPLu201D (without relation to a business function). E.G. u201CBusinessPartnerERPUpdateRequestConfirmation_Inu201D
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
Do I need the XI Content with the service interfaces in ES Repository (and SPROXY) only if the communication is B2B (with PI) or also if the communication is Point-2-Point (without PI)?
Thanks for your feedback!
Chris

Hi Chris,
I'll try and provide answers where I can...
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
I personally don't agree with this understanding. Enterprise Services would always relate to some or other business function, unless we have a different understanding of what "Business Function" means . What changes is how the Enterprise Services (or versions of them) are delivered.
SAP APPL for example would be relevant to most of the enterprise services shipped with a standard ECC EHP*. So it will relate to the business functionality for the applications that are shipped with an ECC installation.
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
I don't understand this question but I'll try and offer a generic answer. You can activate/use Enterprise Services whenever you want to as long as they are already available in your current installation. If they are only available in an EHP that you don't have yet then you will need to upgrade (but I also seem to recall some workarounds - SAP notes - as an alternative to upgrading).
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
You decide when you would like to activate it, it's generally after. SAP will ship them anyway.
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
There is a tool call Impact Analyzer, read up a little on it. It allows you to do an impact analysis before activating. It might also help posting a separate thread on of the ECC functional forums here on SCN for more impact analysis. I'm not sure if the activation can be reverted.
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
The XI Content is the design equivalent of the Enterprise Services as you see them in SPROXY. It's only relevant in certain cases, examples:
- If you want to enhance standard SAP Enterprise Services
- If you want to do additional transformation/s & routing.
If you are planning P2P type communication, then the XI content is not relevant. One thing to be aware of though is if you have your backend ECC system connected to your PI ESR, the view that you get in SPROXY will reflect the SWC view of the ESR. So you might want to download the XI Content & import it into your PI ESR anyway.
Regards, Trevor

Process Chains Always Hangs at the second step waiting for an event

Gents;
all BI process chains created in Production system are always hanging in the second step waiting for an event RSPROCESS with a certain parameter. This issue is happening for all process chains in Production system and it is not happening for the same in other systems in the landscape (development, Copy of porudction, quality and so on). I tried to trigger the event manually using SM62 but the job is always stick to status " released". the same thing was replicated in other systems and the job status has changed and the process was completed.
Any idea what might cause this issue??
Thanks.

Hi,
You said that this thing is happening only in production system.Try doing the following checks :
1.Check SM21to see if there are any red entries.It can be possible that there is some data base RFC connection failure.While checking SM21, make sure you give proper selection condition.If there are any red entries, you may take the help of basis guys to understand the type of failure.May be file system has got some problems.
2.Check St22 and try to analyse if any short dumps.
3.Try to check Connection with the source system ( Goto RSA1->source system tab->right click on the source system and select check option to find if any errors in the connection.
4.If possible, try to load manually in some other info provider.
Thanks,
Tarun Brijwani.

Can't open aperture 3, warning box comes up," warning there was an error opening the data base for the library /pictures/aperture library .aplibrary Whats up?

I have had Aperture 3 loaded on my computer for a while now. Never had any problems till tonight. Restarted my computer and went to open Aperture and a "warning" box poped up, There was an error opening the data base for the library /picture/aperture library ap library. Then a "quit" button.
What is going on and how can I open my aperture. I have pictures that need worked for clients. Help!

Have you run through the steps in Aperture 3: Troubleshooting Basics. If not that's always a good place to start.
If that doesn;t resolve the problem when you post back describe your hardware and software setup.
good luck

What is the average speed for the fans? Mine seem really slow.

What is the average speed for the fans in a MacBook Pro? When my computer is fairly idle, like right now, the fans are at roughly 1000 rpm each. Is that normal? I have seen posts where the fans are 2500-5000 rpm, so mine seem a bit low. That may explain why my computer has been getting hotter more quickly lately - this started happening after Apple replaced my logic board a few days ago.

I installed smcFanControl2 and according to that program, Apple's defaults are 2,000RPMs and the program will not let you set it any lower than that because of the increased risk of damage.
My fans are always at 2,000RPMs during normal usage, and then once I fire up a DVD or Photoshop it usually goes up to the 3,000s or so.

The frozen average base for absence is always recalculated

Similar Messages

Maybe you are looking for