The function of IP: write back data from layout or query into DSO?

hi,guys,
I am very wondering that if BI-IP has the function of adding or modifying data directly into DSO ?which like the function of BPS layout writing data back to infocube? If it could ,how?
Alough I don't think it's possible,I hope someone could give me a certain answer.
Thanks a lot,
johnson.

Hi,
Please search the forum before posting - this question has been asked quite a few times earlier.
IP can read data from multiple types of infoproviders (including DSO) but it can write back data only to real-time infocubes.

Similar Messages

  • Question when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    Question
    when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    See this. <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    Question
    When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    See this. <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • Read/write xml data from/to adobe livecycle forms (pdf)

    Hello,
    I need some help reading xml data from pdfs created by Adobe LiveCycle and also writing xml data back to the form.
    The forms have been created using PROD LC 8.2 and in the future they will be created using PROD LC 9.5.
    I am using Visual Basic .NET to access the data programatically.
    Can anyone help me with some hints? A library, SDK? Any information would be very helpful.
    I am quite new with this Electronic Forms issue and I do not even know where to start.
    Thank you,
    Ionel

    Hi lonel,
    Do you want an online solution?
    I mean, it follows this workflow:
    1. The user will open the PDF by clicking a link, and a server-side program will generate the PDF and prepopulate it with data from some data sources, and render the PDF to the client (Browser),
    2. The user will fill the PDF.
    3. The user will click a Submit button and save the PDF and Data on the server.
    4. If the user wants to edit the Submitted Form, he will click a link to open the save PDF and possibly prepopulate some fields with data from other data sources, and complete the cycle of filling and saved the PDF and Data on the server.
    5. While the user is filling the PDF (inside a Browser), there might be a need to perform some lookup on the server, and update the form parts accordingly as a result of the lookup process.
    For 1-4 above, I have developed a complete base library using ASP.NET which helps you to perform the above.
    You can goto my Google Workspace and you will find a bunch of documents, sample PDFs, collections and VB Classes. To best view them, login using some Google Account.
    For point 4 above, one way to perform this effect, is to regenerate the required XML Data (which has the saved data before and the new lookup data), remerge the entire XML result with and empty PDF Form, and render the XFA (PDF Form) back to the client. But, if the PDF has one or more signatures, it will not work. So, in this case, you can update the Form Fields of a Saved PDF Form with new Data from the server, but the net effect is that you will have to loose all the signatures that were added on the PDF before.
    For 5 (above) there are 3 methods:
    1. Using a Web Service as a Data Connection. This is very easy if you have a traditional Web Service. I have used this method several times and will use it again if the need be. But, there is a problem. If the result of the Web Service is an Array of some Data, and you want to remerge the XFA to get the required effect after executing the web service ... and ... if there are some Drop-Down-List (DDL) fields, the bindings of the DDL Items of those fields will be lost. But, you can rebuild them (on enter event of the DDL Field)  if you have saved them in the embedded XML Data.
    2. You can update few (not many) fields while the PDF is opened (under the Browser via IFRAME) by passing the new field values using the URL Query String method. I have not done this, but I like this method, and I think it is cool. You need to write a server side code to ensure the the new filed values are passed back to the client using the correct URL with the Query String, and you need to write some javascript code inside the PDF to parse the URL and get the new field values and update them accordingly. See this as an example:
    http://www.halnesbitt.com/pages/pdfqs.php
    3. This method is very advanced and uses message communication ques between the Browser and the PDF (which is opened inside IFRAME element) using HostContainer object. This method will enable 2-way communication between the Browser and the PDF on the client side using javascript. I'd love to use this method one day. See example here:
    http://www.windjack.com/WindJack/Browser2PDF/brwsr2acroJS.htm
    I hope this will be of help to you.
    Tarek.

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • Uploading the data from a flat file into ztable

    Hi,
    I have a requirement where I have to upload the data from 2 flat files into 2 z tables(ZRB_HDR,ZRB_ITM).From the 1st flat file only data for few fields have to be uploaded into ztable(ZRB_HRD) .Fromthe 2nd flat file data for all the fields have to me uploaded into ztable(ZRB_ITM). How can I do this?
    Regards,
    Hema

    hi,
    declare two internal table with structur of your tables.
    your flat files should be .txt files.
    now make use of GUI_UPLOAD function module to upload your flatfile into internal tables.
    CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename            = 'c:\file1.txt'
          has_field_separator = 'X'
        TABLES
          data_tab            = itab1
        EXCEPTIONS
          OTHERS              = 1.
    use this function twice for two tables.
    then loop them individually and make use of insert command.

  • I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup".

    I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup" to have all the other information I had from my other iPhone load up to my new iPhone. Hope you can help. What is the difference between "Backup" and "Restore Backup"; is all that different from synching.Thanks. Ana

    That's up to you. Do you want the data on your old phone on your new phone? If so, you follow the directions here:
    http://support.apple.com/kb/HT2109
    If you want to setup your new phone as a new device, then there is nothing you need to do.

  • What is the recommended way to obtain tracking data from carriers post XSI

    We currently run an old version of SAP Business Connector. We are in the process of migrating all interfaces off BC onto PI. The one remaining interface we have problems is the XSI (Express Delivery Interface) interface we have with ECC06 and UPS via the BC server. The interface works but is not stable and we would like to decommission it if we are able.
    I'm not 100% clear but it appears that XSI is no longer the recommended solution for obtaining tracking data from carriers. What is the recommend method today? We'd be happy to use a PI or ABAP solution but would prefer a standard solution that was supported by SAP and UPS.

    Using Time Machine is the simplest way to back up.
    debasencio wrote:
    They don't fit on a standard data DVD and when I try to back it up to my 500GB external hard drive it says its not formatted to files that size.
    How is the drive formatted?
    If it's DOS/FAT32, you can only size file sizes up to 4GB.
    If you are using it on a Mac only, format it Mac OS X HFS+.

  • 30 days back data from selected date

    Hi Gurus,
    I have date prompt in a format (02/01/1998(MM/DD/YYYY)12:00:00 AM) and I have report with 4 columns in the 1st column date 2ed column sales 3ed column 30 days back date 4th column 30 days back sales.
    Date | Sales | 30 days Back date(from the selected) | 30 days back Sales
    How i have to take the days from the above format and make that to 30 days back can any one suggest me how to implement this.
    Thanks,
    Rafi

    Hi Svee ,
    I added timestampadd(SQL_TSI_DAY, -30,Date) formula in the Fx of 30 days back column and it is showing 30 days back date but it is not showing 30 days back Sales it is showing same sales for both date columns.
    Thanks,
    Rafi
    Edited by: Rafi.B on Aug 20, 2012 11:48 AM

  • ABAP Function Module Example to move data from one Cube into Another

    Hi experts,
    Can any please help out in this ..?
    A Simple ABAP Function Module Example to move data from one Cube into Another Cube
    (How do i send the data from one client to another client using Function moduel).
    Thanks
    -Upen.
    Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
    Edited by: Thomas Zloch on Oct 29, 2010 1:19 PM

    This is the start routine to duplicate records in two currencies.
    DATA: datew   TYPE /bi0/oidateto,
          datew2  TYPE rsgeneral-chavl,
          fweek   TYPE rsgeneral-chavl,
          prodhier TYPE /bi0/oiprod_hier,
          market  TYPE /bic/oima_seg,
          segment TYPE /bic/oizsegment.
    DATA: BEGIN OF S_DATA_PACK OCCURS 0.
            INCLUDE STRUCTURE /BIC/CS8ZSDREV.
    DATA: END OF S_DATA_PACK.
    S_DATA_PACK[] = DATA_PACKAGE[].
      REFRESH DATA_PACKAGE.
      LOOP AT S_DATA_PACK.
        move-corresponding s_data_pack to DATA_PACKAGE.
        if DATA_PACKAGE-loc_currcy = 'EUR'.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
          DATA_PACKAGE-CURRENCY = 'USD'.
          APPEND DATA_PACKAGE.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
          DATA_PACKAGE-CURRENCY = 'EUR'.
          APPEND DATA_PACKAGE.
        else.
          DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
          DATA_PACKAGE-CURRENCY = 'USD'.
          APPEND DATA_PACKAGE.
        endif.
      ENDLOOP.
    This is to load Quantity field
    RESULT = COMM_STRUCTURE-BILL_QTY.
    This is to load Value field
    RESULT = COMM_STRUCTURE-NETVAL_INV.
    UNIT = COMM_STRUCTURE-currency.

  • How to select the data from a Maintainance View into an internal table

    Hi All,
    Can anybody tell me how to select the data from a Maintainance View into an internal table.
    Thanks,
    srinivas.

    HI,
    You can not retrieve data from A mentenance view.
    For detail check this link,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
    Regards,
    Anirban

  • How to read and write a data from extrenal file

    Hi..
    How to read and write a data from extrenal file using Pl/sql?
    Is it possible from Dyanamic Sql or any other way?
    Reagards
    Raju

    utl_file
    Re: How to Create text(dat) file.
    Message was edited by:
    jeneesh

  • Get the data  from excel and insert into the database

    I want to read the data from excel file, get the data from excel and insert into the database.

    You can use the Apache POI HSSF API to read data from Excel files and you can use the Sun JDBC API to insert data in database.
    This has nothing to do with JSP/JSTL.

  • Hi.  I recently purchased 2 ringtones from itunes store.  When l asked the sysem provider to transfer my data from old phone to the new iphone 5, it gets override.  When i try to download the same ringtones, it asked for me to purchase again.  Pls help

    Hi. l recently purchased 2 ringtones from itunes store. When l asked the system provider to transfer my data from old phone to the new iphone 5, it gets override.  When i try to downloa the same ringtone again, l was asked to purchase it again. Please help tks

    You only get one download.
    Did you fail to save your ringtones to your computer?

  • What is the best way to transfer my date from my old iMac to my new iMac?

    what is the best way to transfer my date from my old iMac to my new iMac? I don't have a time capsule, so I cannot use time machine.
    thanks

    Your best bet by far is to use Setup Assistant when the new Mac first starts up to transfer directly from the old one. 
    It's similar to Migration Assistant, but doing it that way will avoid having an extra user account.
    Either way, you can connect them via FireWire, Thunderbolt, or your network, but avoid wireless if at all possible.  You can connect both to your netwrork via Ethernet, or put a single cable between the two. 
    See Using Setup Assistant on Mountain Lion or Lion for details.

Maybe you are looking for