The future playstations

Hello, my name is Hamad Ali, im the boss of Sony and i am here today to bring to light what the future playstations hold for younow there is a very difficult matter when it comes down to the products you buy, especially playstations, since it is a gaming console, and a very good one in that category, the question remains that you keep wondering or go through thoughts through your daily life like, maybe this should be the end of the gaming console or they should come out forever, and but this gives me such a nice feeling. What this really means is that you need a solution, and the answer is the same ideas used in the gaming consoles, repeating themselves in bigger and better ways after all the particular gaming consoles are released. So this is what the future playstations are going to be like Playstation 3: comes with a camera accessory and 3d glasses (stereoscopic 3d), and also playstation movePlaystation 4: comes with a better camera accessory which makes the graphics better and also playstation move, 3d glasses are supported on all gamesPlaystation 5: projects 2 images in front of your eyes inside your eye and causes an illusion which causes you to see them as if they were being projected from a device like a projector, this is possible through an accessory.all the playstations will becoming with reverse playback, just different accessories
you can play older games with new technologiesPlaystation 6: will come with a virtual reality head set, it will cause a really big screen in front of your eyes even though you will be looking at it through the virtual reality head set which is the glasses, this will be the accessoryPlaystation 7: will come with a virtual reality head set that can project 3 screens, one in front and two on the sides, this will be the accessory.Playstation 8:  will come with energy creating or you may say visualizing triggers or gadgets which will cause you to sit inside a force field of the game and notice everything that is happening in the game around you, these will be 4 gadgets then the revoultion will come
this is when these above processes repeat them selves in a bigger better way.

As designers, we need to consider more than just whether to save in PDF or EPS. First you need to be aware of industry norms for the type of artwork you are making. For example, packaging designs for corrugated boxes, corrugated displays and folding cartons, should be done in Illustrator. That program acommodates large sizes, easily incorporates dielines, and there are 3rd party plugins providing tools needed for those types or products. Also edits are required 9 out of 10 times so a flattened PDF or EPS will not do. Second, you may not know what equipment and software the printer is using which may not be compatible with certain files.
Doing preflight for all new files we receive at my company, I have to reject some and ask for different formats. I get a number of PDFs that we can't use, even with our PDF editing program, and some EPS files dont work either.
So what I'm saying is don't be adamant on providing only one type of file. Communicate with the printer to find out what is best.
But my opinion on PDF versus EPS - because of transparency, I would always choose PDF over EPS.
RC

Similar Messages

  • Bug? My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future.

    My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future even though I can see them on the month, week and day view. Any suggestions on how to fix it? I've tried it all. I called the apple support and they checked on their iPads. They all did the same and they couldn't help me. They suggested trying this way. I'd like to be able to plan a few years ahead and the year view would make thing so easy!
    Is this a bug?

    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
    Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

  • When iTunes upgraded, many of my song tags were changed by iTunes.  This happened again when an update was sent this week.  Is there any way to avoid this happening again in the future?

    When I downloaded the new iTunes, it changed the tags on some of my tracks.  As a result, I had to fix them manually.  When I downloaded another upgrade this week, my tags changed again.  How can I prevent this from happening in the future?

    The cricual thing is to have a complete backup of your library that you could restore if needed.
    What changes are you noticing? There appear to be some new as yet not well documented features designed to sync data across multiple libraries/devices which may have unwanted side effects.
    tt2

  • How to Send an Email at a Specific Time in the Future Using Mozilla Thunderbird.

    Hi guys,
    I downloaded Thunderbird for my Mac for one single purpose, simpy to be able to send an email by executing the time and date i wish my email to be send, automatically. The extension saves the message to draft and monitors the messages in the draft folder, when the chosen time arrives it moves the message to unsent and sends unsent messages. So i can send messages in the future.
    I dont know how to manage this, and i would appreciate help and tutorials from you guys!

    Why not read Thunderbirds tutorials and post in their forum area?

  • The Future Of The N900?

    Hello,
    It was hard enough for me to fathom out what was going on in favor of the N900 before I heard about the Microsoft announcement.
    It seems Nokia have got bigger concerns for the future of themselves than to be concerned about a past  product?
    As a layman it seems the N900 is good phone but will be ultimately be limited by it's processor. I assume like computers this will increase unless there are limitations.
    BUT, it does seem that all these names I've heard of since owning a N900 - Maemo, Meego, Moblin, Intel, Qt, Ovi Beta do not  represent a part of the future in the grand scheme of things for Nokia. I can understand that if Microsoft is necessary for survival.
    I have no experience of Ipod / HTC Andriod but it does seem these have stolen the march whilst Nokia have been floundering. I really don't know if I move away from the Nokia N900 if I would be pleasantly surprised or wish for it back.
    In the meantime if the N900 has a future interesting or otherwise it would be good to know as upgrade is round the corner and unless the competition are not to be missed, I am happy to stick with the N900 as it does the business for me.
    The thing is I shouldn't need to be thinking like this but it is not obvious to me where the Nokia successor to it is.
    I am very open to responses to my thoughts, which may need correcting. I might not even be on the right track, but it's funny how I am the only person in my group of friends with a Nokia, never mind a N900.
    I would also like to mention that cpitchford has helped me in the past and I consider him to be the man in the know by far. I was gutted to read a recent post how he felt let down. 
    I favor quality brand loyalty but this seems to questionable these days. 

    hi,
    i do agree with you!! 
    even after losing my 1st nokia n900, i cud not digest any other phone as similar and doing-business for me.
    hence to asnwer all easy options i bought again my 2nd n900.
    Certainly there is no match to its convinence, leave apart its processor. 
    I am also amongst those who r eagerly waiting for new version, but the possibility seems to b diminishing .
    hope nokia will revive this exclusive-not-for masses-smartphone!!!

  • How do I delete photos from my daughter's ipod that showed up on there when she got music from her aunt's itunes? Also how do I make sure none of my iphone pics show up on her ipod in the future (we use the same itunes account and I think same icloud).

    I'm totally new to iphone/ipod.  I need help with the following:
    1) How do I get rid of a folder of photos that showed up on my daughter's ipod touch when she received some songs from her aunt's itunes?  After she got some songs from that itunes a folder of pictures showed up with no delete option.  Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?
    2) Also, my daughter uses same itunes as myself, how do I make sure any pics I have on my iphone & icloud (itunes) don't show up on her ipod? I shut off my photostream so perhaps this is the solution.  But I noticed that a message I sent from her ipod to my sister (an iphone user) later showed up on my iphone (as if I had sent it from my iphone)! That was really odd. I'd like to keep our itunes account together simply so I can monitor her downloads, etc so I don't want to open up her own itunes to avoid automatic syncing.
    I only want to share music between our devices.  I don't want her pics nor my pics to go to icloud/itunes.
    Thank you!

    1) You asked "Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?" Yes, you have to connect the iPod to that computer and go to the Photos pane for the iPod in iTunes and uncheck sync photos and the click on synce/apply. In the future do not check sync photos.
    iOS and iPod: Syncing photos using iTunes
    2)
    Create a NEW account for using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    Then on the iPod go to
    - Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
    - Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
    - Settings>iCloud and sign out and sign in with hers
    Contnue to use the commpn ID/account for Settings>iTunes and App stores.

  • Can you keep extra songs on your iPod that are not in your iTunes library, and not lose these songs every time you want to delete something from your iPod in the future?

    I have all these songs that I want to store on my iPod but not on my computer, and I know that by choosing to manually manage my music I can still hang on to these songs when I add new songs to my iPod.  However, what if I want to delete songs off of my iPod in the future?  Will I lose all of the extra music that is on my iPod but not my computer, due to the fact that the only way to delete songs seems to be by syncing? 

    The answer to the question in the title of the thread is yes, but it is not necessarily a good idea. At some point you are likely to find you need to restore your iPod for one reason or another, or it could be lost, stolen or damaged. If your songs aren't on your computer, and backed up too, then you will be less than happy.
    tt2

  • The future of Snapshot, and similar tools.

    My apologies for posting this twice. I posted it first as a follow up
    to an old thread in ...
    novell.support.zenworks.desktop-management.6x.install-setup
    I am quoting some comments made in that forum.
    Then after surfing the forums for awhile, I thought the issue might get
    more attention, if I posted it here. I am looking for ideas and advice
    on the future of snap shot, and any tools that Novell might provide to
    replace it.
    If I could address some of these comments, in hopes of better
    understanding ...
    RE: >>>
    > Most companies invest in packaging tools such the full version of
    > AdminStudio to create deployment packages. They then use their desktop
    > management suites to deploy those packages.
    Admin Studio is not cheap. After a client has spend thousands of
    dollars to implement ZENWorks, now I have to tell them to drop another
    couple thousand down for an application packager. I also don't fully
    understand Novell's relationship with the product, they don't seem to be
    partnering well together, I'd appreciate anyone else's read on this
    relationship.
    RE: >>
    > Novell has for over 5 years now been trying to steer people from
    > Snapshot
    I've heard that statement made verbally by many engineers, but I don't
    always see the practice following that.
    Has Novell ever gone on record to state they will no longer support snap
    shot???
    RE: >> > If your snapshots are failing with the latest versions of
    snapshot, then
    > most likely your software package falls outside the scope of what
    > snapshot should be trying to handle.
    Maybe I've just gotten lucky? I've have not had many issues with using
    snapshot, and I have been involved in a wide variety of applications.
    I have seen the statement made on the forum that ZEN Works is not really
    a "Packaging" suite. While that may be a true statement, because
    Snapshot has been packaged with the product for so long, the mind set of
    customers is that it is expected to work, and be supported.
    I look forward to additional comments on this matter.

    Tom,
    I'm not sure what exactly are you searching for? ZdM is already providing
    you with snapshot replacement - AdminStudio ZfD edition, included in ZfD
    price.
    AdminStudio part for preparing snapshot MSI is identical in ZfD and
    Professional edition.
    All comments you qouted (including this one) are personal opinions - I
    suggest you to try AdminStudio ZfD edition and make your own.
    Denis
    "tom" <[email protected]> wrote in message
    news:[email protected]...
    > My apologies for posting this twice. I posted it first as a follow up to
    > an old thread in ...
    >
    > novell.support.zenworks.desktop-management.6x.install-setup
    >
    > I am quoting some comments made in that forum.
    >
    > Then after surfing the forums for awhile, I thought the issue might get
    > more attention, if I posted it here. I am looking for ideas and advice on
    > the future of snap shot, and any tools that Novell might provide to
    > replace it.
    >
    >
    > If I could address some of these comments, in hopes of better
    > understanding ...
    >
    > RE: >>>
    > > Most companies invest in packaging tools such the full version of
    > > AdminStudio to create deployment packages. They then use their desktop
    > > management suites to deploy those packages.
    >
    > Admin Studio is not cheap. After a client has spend thousands of dollars
    > to implement ZENWorks, now I have to tell them to drop another couple
    > thousand down for an application packager. I also don't fully understand
    > Novell's relationship with the product, they don't seem to be partnering
    > well together, I'd appreciate anyone else's read on this relationship.
    >
    > RE: >>
    > > Novell has for over 5 years now been trying to steer people from
    > > Snapshot
    >
    > I've heard that statement made verbally by many engineers, but I don't
    > always see the practice following that.
    >
    > Has Novell ever gone on record to state they will no longer support snap
    > shot???
    >
    >
    > RE: >> > If your snapshots are failing with the latest versions of
    > snapshot, then
    > > most likely your software package falls outside the scope of what
    > > snapshot should be trying to handle.
    >
    > Maybe I've just gotten lucky? I've have not had many issues with using
    > snapshot, and I have been involved in a wide variety of applications.
    >
    > I have seen the statement made on the forum that ZEN Works is not really a
    > "Packaging" suite. While that may be a true statement, because Snapshot
    > has been packaged with the product for so long, the mind set of customers
    > is that it is expected to work, and be supported.
    >
    > I look forward to additional comments on this matter.

  • FPBW: Extract Open Items with a posting date in the future

    Dear all,
    I'm are currently searching for possibilities to extract Open Items with a posting date in the future from SAP IS-U 4.72 into SAP BW 3.5.
    Currently I'm using the Business Content extractor 0FC_OP_01 together with the mass transaction FPBW in IS-U.
    The problem I'm facing is within the mass transaction FPBW. I've have set the key date at 01.11.2007, but this job already runs for 52.000 seconds on the same database select-statement.
    Does anybody know a possible solution to improve the performance of the statement below? (I pasted it from the process overview)
    ================================
    SELECT
    /*+
      INDEX("DFKKOP" "DFKKOP~1" "DFKKOP^1" "DFKKOP____1" "DFKKOP____1__X" "DFKKOP_1")
      "BETRH" , "BETRW" , "BUDAT" , "BUKRS" , "FAEDN" , "GPART" , "GSBER" , "INKPS" , "SPART" , "VKONT" ,
      "WAERS" , "MAHNV" , "ABWBL" , "APPLK" , "AUGBD" , "AUGBL" , "AUGBT" , "AUGDT" , "AUGRD" , "AUGST" ,
      "AUGWA" , "BLART" , "BLDAT" , "EMGPA" , "GRKEY" , "HVORG" , "MANSP" , "MWSKZ" , "OPBEL" , "OPSTA" ,
      "OPUPK" , "PERSL" , "PYMET" , "QSSHB" , "SBETW" , "SPZAH" , "STUDT" , "TVORG" , "VTREF" , "XBLNR" ,
      "XMANL" , "HKONT" , "OPUPZ" , "OPUPW" , "STAKZ" , "WHGRP" , "AUGBS" , "XANZA" , "XRAGL" , "ABWTP" ,
      "ASTKZ"
    FROM
      "DFKKOP"
    WHERE
      "MANDT" = :A0 AND "AUGST" = :A1 AND "GPART" BETWEEN :A2 AND :A3 AND ( "AUGDT" = :A4 OR "AUGDT" > :A5
      AND ( "BUDAT" <= :A6 OR "AUGBD" <= :A7 ) OR "WHGRP" <> :A8 AND "OPUPW" = :A9 )
    ORDER BY
      "AUGST" , "GPART"#
    =================================
    I have already tried to create an index on the following fields (in the same order):
    - MANDT           Client
    - AUGST           Clearing status
    - GPART           Business Partner Number
    - AUGDT           Clearing date
    - BUDAT           Posting Date in the Document
    Any help would be appreciated!
    Thanks in advance,
    Steven Groot

    Hi Marcos,
    When you have created the Restricted keyfigures for Open Items, You have to add the date characteristic on which you are looking open item and add the variable there.Here you have to use a variable of type Interval and select the operator "<" the date of the Variable.If you go through, there are standard variable for keydate, which you can use directly.
    Hope you got the idea
    Regards
    Happy Tony

  • When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

    When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

    I'm not sure I understand the question, is the message tone going more then once?
    Turn off repeat message alert here:
    settings > notifications > messages > repeat alert > never
    Some people have found this does not stop the repeat miessage tone,
    if you are one of those then I suggest you contact Apple:
    http://www.apple.com/feedback/iphone.html
    They may not respond, but hopefully will fix in uodate if enough people complain.

  • New Features it would be cool to see implemented in the future

    I really love itunes, but have some ideas of things that could be improved upon in the future:
    Firstly this in an issue about something that used to work better than it does now: it used to be that if you had a smart playlist set to live update on your ipod it would update on the ipod itself, not just itunes. here's an example: if the list was set to only have songs with a playcount less than one (ie, unplayed songs) then if those songs were played and the playlist was exited from and reentered, those songs would then no longer appear in the playlist. This was a feature I used with regularity, but now cannot due to updates to my ipod's os.
    Secondly, it would be great if more logic were added to the smartlist functionality. As of now, you can either have a list follow all or any of the options. it would be great to have logic more along the lines of: this and this or this or that. that way some very interesting and specific lists could be created.
    also, it would be cool if the blue dot that appears next to a podcast if it is new would last until that podcasts has been played through in full (ie playcount=1) instead of just in part.
    another useful addition would be the choice to designate a playlist as video only, audio only or any. that way videos wouldn't pop up in audio lists.
    finally it would be great to have an option to say if the ipod it being charged, then the backlight would automatically turn on and stay on (timer turned off).

    http://www.apple.com/feedback/

  • I have just over 100gig of music in my iTunes library plus what ever else I add in the future. Because of the amount I had to save my music library on an external drive as my laptop did not have the memory to hold it all. I want to back up my iTunes libra

    I have just over 100gig of music in my iTunes library plus what ever else I add in the future. Because of the amount I had to save my music library on an external drive as my laptop did not have the memory to hold it all. I want to back up my iTunes library and save it on a different external drive, one I store all my back ups on. Is this possible? If so how can I do it? 

    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    Delete the "songs" that do not play in your iTunes library and reimport them.

  • Is there a way to make a list of songs that I plan on buying in the future?

    I constantly see songs that I want to buy on the iTunes store, but then end up forgetting them before I get money to buy them. Is there a way to make a list on the store so that when I come back in the future, I can just pick the songs off of that list?

    Sure, pen & paper will work, but if it's in a wishlist, you just click on the arrow and don't have to type things all over again.

  • Rather than persists in the future thread...

    The point I was making would be for Archs documents to pick up where man pages leave off, but whatever.
    If you think I stated Arch must fix man pages, not so. I was intending to show that docs as a whole, leave whole subjects unhandled, Arch could provide the answers in its own docs and come out as a hero.
    Or maybe not.
    And remember, users who cannot configure ppp cannot get on the internet to get the ppp configuration docs. Or any other docs, for that matter. One failed configuration needing web documents might leave the newbie stranded.
    Or maybe not.
    I personally think that a lot of configuration has to be made before Linux (Arch or others) will communicate over the internet to a remote website, so as to allow documentation to be visible..... but hey, maybe I missed something? Like the document to get a modem setup? So I could get web based documents? Chicken and egg?
    Maybe not, eh?
    As for the concept of needing to be an experienced admin - these folks usually do not need any docs. That compares to bad docs to a newbie - essentially no docs. Missing docs and no internet access are also useless. Thus, the newbie without documents needs the only thing which gets anyone else through the issue - the newbie needs experience, because the docs are weak or missing or erroneous. Try as you might, that is an issue I went through. Take, for example, when I needed network assistance. Archs forums were not the first place I went asking for help, believe me; I asked and am still asking. 2 years now, and I'm just getting told Samba. Need I say this is baloney? That issue is not Archs fault, but Arch could have a smashing success on its hands if it were to document a few critical areas as well as 0.2 was documented.
    Installing and partitioning... What can I say... apeiro is not mentioning anything I've PM'd him about: secondary hard disks getting reformatted. My pm brought me the answer that most Archers never repartition, so the script was.... well, I guess you could say it was a shot in the dark. Fine, but the PM stated the alternative was something like 'I usually use the commandline stuff and simply reformat the existing partitions'.
    Why the **** would an inexperienced newbie set up partitions outside of using the installer?? The Arch docs tells the newbie to use the installer to partition their hard disks! What, exactly, is the newbies idea of an installers purpose? Are you a newbie when you decide what a newbie has for skills? The installer obliterated gigabytes of data, I trusted that it was going to perform safely, and yet nobody ever used it to learn of the glitch? Ooookkaaaaayyyy.
    Folks, the docs said to use the installer. Never mentioned possibly partitioning from the command line. Take your pick, the newbie was not at fault for following the docs.
    I'll run along, because I cannot possibly be speaking truth. Neither am I telling you where I had problems. This is cannot be feedback, it must be dunbars rantings. Does Arch have a future when feedback is considered trolling or flaming the developers? Lighten up, folks, I had once been trying to offer help and sought to get help.
    I know this is a labor of love for you all; in many ways, Linux is a labor of mine as well. Sadly, you are not hearing some issue that could help make Arch the distro that some folks want it to be.

    dunbar wrote:Step by step: I mentioned a few weak areas that newbies would not know how to address.
    I mentioned that newbie would not necessarily have the skills to get the correct docs from a myriad of websites.
    Which appear (and frequently are) obsolete.
    Well, then we include the docs and then non-newbies would complain that we are cluttering the filesytem and you would complain because those documents are obsolete. sound familiar? i have seen this argument before and there is not winning it. people bitch about the manpages, docs, etc ALL THE TIME. you must know that. so the best we can do is add your concerns to our own documents and add necessary documents to the files.
    When their internet connection was what had failed, the internet doc is not available.
    And when they had no Xwindows in which to read HTML documents,
    and nothing tells the newbie about CLI browsers.
    i would expect that no absolute green newbies would try arch so those newbies that do show up i would assume have some linux experience (one can be a newbie and have some experience) so i would assume that they would know about lynx or links browsers or at least know how to use cat and less.
    another point about this is that if a newbie does not even know how to use cat, less, or a cli editor to view files then they would be very very f**ked with arch linux and having self contained documents would be pretty pointless. so again i would ask is it not wise to print out/write down any relevent install/configuration instructions? you do know how to write since you already say you don't have a printer?
    okay so if we include install configuration data in the installer will you know how to access it? is it fair to tell the user that it is in such and such directory and you can access it through say vc1-4? should we scrap our online docs altogether and just have them self contained?
    The network thing was changed along the way - IPX/SPX was part of the issue, my 5 port switch is another part. I am not berating you, sarah31, nor am I asking anyone to re-write man pages, etc. as several posts seemed to attribute to me. The man pages are the weak spot, Arch docs need to go from there. Never wanted to say more than that.
    and all i wanted to know is what apps do we extend our documentation to? all of them? are you saying that all our apps need extended docs? can you point me to one distro that has extended documents of all their applications? besides ppp what would YOU extend? it is fair to ask this of arch developers/users but they really need to know just what manpages are defunct and have no bearing on arch.
    i would not expect a request like this would get fulfilled too quickly there are lots of applications' man pages and docs to go through then the developers would have to determine what is needed and what is not.
    as for manpages......i used to find them unreliable but to be honest most manpages i have viewed lately have been very clear and concise about how to operate/configure apps. i am not saying this to contradict you but i say it honestly. when i have been unable to find someone to ask on this forum or irc manpages normally do the trick for me. (and don't say it is because i am some expert with linux because i a definitely not)
    I'm trying to point out that A] with a presumed goal of gaining Linux users,
    B] Arch, being small, uncluttered and likely attractive to newbies (small draws newbies because it is so small (dialup accessible but only one big download at a time) and older systems where XP won't fit on their disks, etc) and also
    C] since Arch had very tight documents covering what needed to be done (but might need more topics covered), I felt that was likely going to lead to newbies arriving here in some situations that
    D] Arch clearly tries to assume will not need the attentions of forum members (which have the skills) and
    E] the newbie does not have the skills.
    That would lead to the assumption that Arch was not interested in the users needs.
    with respect to this.....well what can i say but you are a complete ***hole. for one thing small does not always attract newbies in fact i know ALOT ALOT ALOT of people that will not even try arch or similar distros because they are small. most people want the choice to kludge up their system if they like but arch is not in this realm yet because we do not offer alot of packages.
    i agree we need more stuff covered in our documents and you would not find a single user or developer that would disagree with you. So i guess this point you make throws out your idea of extending the manpages because that is not a concise project (for example manpages for transcode are good but to get into all the basics a newbie would need to know would require one to be alot more verbose similarily with networking documents)?
    to say that we here do not pay attention to users is ABSOLUTELY THE WRONG ANSWER. there are only two pages of unanswered post and considering there are always post that are merely statements that do not need to be answered that is very good. in fact if you even bothered to check there are only 79 unanswered posts out of 4512. that's 1.75% of the posts on the forum are unanswered. besides that there are always questions that no one has an answer to. obscure problems do exist i know i have hit many in my ventures in any OS.
    besides this forums are a free service. no one is under obligation to use it user AND developers alike. no one is paid here so don't diss anyone and don't feel that anyone is obligated to answer you.
    i can also say that you are a complete arrogant ass for saying arch does not care about its users. we don't care about you that is for certain. but i can guarantee that everything i did every package i made, upgraded, donated, fixed, etc was for the user. people wanted openoffice i spent a week building it then it got broken with the upgrade to gcc 3.3 i spent another week trying to fix it without luck then judd spent 3 days compiling and patching 1.1. so do you EVER say we don't fucking care you little ingrate.
    The perceived 'lack of clarity' on my part is because I am still a newbie. I might have a few things working under Slackware, but I'm not certain, today, where I even made the changes. I'm not asking for hints on how to keep a notebook, I have one, it is 40 miles away, I cannot discuss Linux by reading my notes or grepping my config files, they are 40 miles away. I cannot log into my Linux PC, I only have dial up, the only telephone line in my house is for voice communications. DSL is too far away, Cable is too expensive.... have I never said any of this before? No, not in this thread, but I've always been a hardliner on those points sarah31. I do not match up with what is assumed of me. But here I am, posting, despite my ineptitude.
    "Waaagh i'm a newbie. waggh i don't have highspeed pity me pity meee!"
    there are lots of users on dialup here including developers so we don't give a flying f**k.
    I believe the deepest undercurrent I see here is diverging viewpoints of what Arch is and diverging goals for Arch. My views are different from a few who assume the Archer has the skills, hApy seems to have a third viewpoint, and yet a third viewpoint exists.
    yeah and you are saying we have to conform to your view. typical. funny we seem to be getting more and more users all the time both newbie and non newbie and this despite having a completely uncaring development team and a horrendous set of docs. one of the funny things is that many of the newbies recently are all dialup like you and they still take time to make irc interesting or contribute packages.
    If my posts reflect an atmosphere of bewildering viewpoiints, I'm not surprised - I've tried to reply to differing posts which take differing opinions; I suppose it is frustrating to anyone to reply to 3 posts at once. I'm replying in order to offer my view of when I was a frustrated newbie (this morning, I think ;-) ). Remember, I was told by a certain forum member that, most certainly, dunbar was a slackware user and the assumption was that he must be nearly expert - yet, I declared, no, I'm not an expert and I freely admit a lack of skills. I was not the one who estimated dunbars skills, Sarah31.
    oh you are soooo subtle in your insults. come on you tell me after hundreds of installs and two years of using linux you don't know anything? find me five green newbies that know how to grep or know to look online for information. personally i and many others here and elsewhere have little time for someone who cries about being a newbie when they obviously aren't.
    what is it some sort of ploy to make people feel sorry for you or shorten your look online for info that you likely could find in two minutes? spare me. up to one year you are a n00b after that you are not.
    I'm definitely not interested in dissing anyone, not you, nor Gyroplast, nor Apeiro, nor hApy .....
    hmmm you care to stand by that or should i pull out several quotes to the contrary?
    I have pointed out that early on, Arch was interested in being Judds perfect distro... did anyone ask him if he ever said that? As I said, I can offer to cut and paste, if you wish.
    so your point is? is this a bad thing? is it not possible for many of us to believe it is the perfect distro for us as well? why not diss yoper for claiming to be THE distro.
    Yet, I'm clearly getting 2 viewpoints in response to me repeating that fact. Thus, in order to push the reader away from their position, so as to get them to walk in my shoes, I post from different directions aiming toward one central condition. Is the issue me, and me alone? Or did the issue exist, and I'm guilty of responding to all viewpoints and thus I'm guilty of pointing it out?
    i have been in your shoes and i often get put back in your shoes when i start to use or investigate applications or areas of linux i have never explored before. so whats your point? if it was to fix up the documentation? that was a goal for some time now in fact a few users have made it an ongoing thing.
    you are not the only one that is a newbie here nor are you the only one here. there are many things that developers must balance when they do their duties. there will never be a distro that will satisfy all a user's needs but i can tell you that the arch team does try to please as many people as possible. so yeah i think you are the issue to some extent. you could have come in here and politely explained what it is that you felt needed improvement but instead you came in and whine and cried that you were so abused and that we had to change to please you. it was all about you anyone can easily extract that from the way you keep flipping between i'm a newbie, i'm not a newbie but i speak for newbies. if you cannot find the offesive comments you have made along the way or see how some people came to the conclusions they did then it is your fault.
    Anyway, you mentioned the ethernet thread.... thydian is evidently new here. Lets explain that issue out loud (since you already raised the matter). I offered to write a document regarding Ethernet setup, I was not shown what to do (frozdsolid posted that they were "pretty sure that's necessary"). I do not assume that every member here reads every posted message; thus, I believe I had read the opinion of someone who was as newbie to Arch as I myself was a newbie (frozdsolids title still shows only 4 posts even today). Nobody here 'handed me an answer' as some might conclude from your post.
    well YOU may not have gotten answer but people DID try to answer your question and, in fact, the answer is there. but you could not extract it or did not know how to ask the question properly to get the result you desired.
    but of course we are the bad guys here because we took the time to try and give you an answer. man you are such a wanker....
    I posted everywhere else on the internet about my situation using IPX/SPX, I heard that it was a dead protocol. I finally found information about IPX/SPX, it was not herein, so the forum was of no use in that instance - that is a fact, sarah31. Now that I have concluded that IPX/SPX was not the best choice and changed the rest of the household over to TCP/IP...... the IPX/SPX issue is no longer the focus, so I dropped the subject; until I was  6 months later, I came back here, saw BluPhoenixs post and was a bit confused. That lead to him suggesting DOSemu, I stated no, that was not preferred, etc. etc. I ultimately thanked BluPhoenix, stated why I was going to drop the issue, and I left the thread cold.
    so why insist on blaming us for something that we tried to answer but was obviously beyond our knowledge? you did it at the end of that thread and you constantly do it here. how many other people did you verbally assault along the way?
    The whole thing got misdirected, away from what I was asking for, as if the topic was no longer my decision alone.
    what a pile of BS. it was YOUR thread so get in there and assert yourself. threads get out of hand sometimes but the original poster can easily get control again if they have a pair.
    i know for a fact that the people he chose to insult would and have tried to help him but he blows them off. i know too that the head developer is VERY open to user contributions yet dunbar chose not to contribute.
    The reasons should be evident by now - when I offered to contribute, I had the time; 6 months of time transpired, I was not able to write because I had no answers with which to generate such a document. I had to revoke the offer. I am taken by surprise that anyone would say I was given the necessary information!
    BS again you just stated that you got your answer (outside of our forum) so you could have easily posted back with what you had found out and then provided documentation later. and you mean to tell me that you have not had time in the last six months to wing something together. shit you have practically written a novel here.
    it is obvious to me that you just want to guard that knowledge and us it to flame and troll here. once you had the answers you were sure to come back and flame that thread and continue flaming on a regular basis. what an ass.
    I've known you to be patient, sarah31 (and you are yet teaching me as I write), but when you say I'm taking great pains to insult someone - while I'm waiting months for forum responses and I'm reading internet documents that are obsolete and these are docs which talk about a different distro, refer to a different kernel, puts files in a different location????
    yeah so you waited for an answer and didn't get one...it happens. you stated that barely anyone knew the answer. fianlly you got one and then came back and rudely blamed us for poor documentation and a barrel of other things. nice guy.
    all i saw was orelein answer you in a nice and proper fashion and you called him eliteist. you also were rather rude about judd in your first post in the future thread. so yes i see all throughout attempts to belittle and brate and not one instance of sober commentary from you.
    and here you are again balming us for online docs that are not ours.
    That is not appropriate, ever, to assume that the newbie will not find older docs and will know enought to discard the incorrect ones.
    this is not limited to newbies.....it can definitely be difficult finding what you need online.
    And since most internet docs are coasting along since, for example, 1999 (re: the IPX/SPX how-to)
    well if you are checking out and obscure problem that is actually now obsolete then sure the fucking doc will be old but you make is sound like ALL docs are old. so i have to assume that you are very much an idiot because i have found most documentation for most current issues to have current docs. most applications will upgrade their docs as they upgrade or do you even notice that? are you to self absorbed to go around and find out if your wild accusations actually have any merit?
    once again, and I'll ask this, and directly of you, sarah31, why would any newbie assume that 4 year old document applied to their situation??
    well knowing how many newbies are i would expect them to ask if docs are relevant. or they could possibly look into some of the information. if it was not producing answers...wow i think they would ask for help again. shit do you even pay attention to how newbies act on justlinux?
    :oops: I'd ask that people remove useless web documents, but I fear that I'd get only 4 responses. That is reality, not sarcasm.
    hmmm remove docs, add docs which is it? fyi arch removes most docs except in rare circumstances. if those docs are html they are html. if a n00b doesn't know how to view them i expect they would ask( that is if they are outside x).
    dunbar...stick with slack because arch will never please you. slack is a very nice distro that should have the balance arch does not afford you. that is the great thing about a linux .... if you don't like one flavour then try another. just don't go back to the ice cream dealer and berate him for selling you your choice...get the point (if you don't then fine i expected that)

  • HT2513 Ical sync with iPad limited to 2 years in the future

    Ical sync from Mac to iPad only appears to work for events up to 2 years in the future. After two years from current date no events show up on iPad. Can you increase this to sync events three years into the future?

    Hi,
    Are you following these instructions (I have not done this):
    http://help.yahoo.com/l/us/yahoo/calendar/yahoocalendar/sync/sync-03.html
    Only the CalDAV calendar created with this process should sync.
    Best wishes
    John M

Maybe you are looking for

  • Problem with DATE_CONVERT_TO_FACTORYDATE'  FM

    Hi, I am experiencing problem with ‘DATE_CONVERT_TO_FACTORYDATE' FM. It is throwing 'DATE_AFTER_RANGE' exception. This error is throwing for the 09/10/2007(mm/dd/yyyy) date only. This factory calendar is defined from 1990 to 2010 and 09/10/2007 is a

  • How to deactivate Siri on Home Button

    Hi guys, my iphone 6 has the newest ios version (8.2). There seems to be a bug regarding siri. I can not disable siri in any way! I tried the solution from this post: How to disable voice control (ios 8) but it did not work. Disabling siri seems not

  • Spry validation textfield widget

    I've followed the lynda.com tutorial online here & added the widget to my page in DWCS4. I can preview the various states in the properties bar but it is not working when I save the page & preview in my browser (or live view). My page is a php file -

  • How can i create a page like this

    Hi I have a client who liked this page effect the gallery section looks like the mac doc is there a similar plug in i can purchase and integrate in one of the html pages? http://www.belloproductions.com/index-3.html

  • After I rebuilt my inbox all the emails in my sent box have vanished how do I get them back?   d

    This morning I found that some emails in my inbox, when I tried to open them showed this sort of message. "The message from [email protected] concerning "Your Oyster card has been topped up" has not been downloaded from the server. You need to take t