The Generic Service Component Container can not started

The Generic Service Component Container can not started because the following errror in the log file
Could not start Service Component Container because an unexpected RuntimeException or other Throwable occurred -> oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
Every thing else is working fine

The following generic services can not be started
Output Post Processor
Generic Service Component Container
Email Center Download Processor
The log file contain the same error is as follow respectivily
log of Output Post Processor
Unable to initialize state monitor.
oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
=================================================================================
Log for Generic Service Component Container
LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.initializeStateMachine() : BEGIN
LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.getNewWorkflowContext() : BEGIN
Could not start Service Component Container because an unexpected RuntimeException or other Throwable occurred -> oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
============================================================================================================

Similar Messages

  • The Service Component Container is not running" eventhough they are running

    Hi,
    We are on 12.0.4 with hardware load balancer(cisco), and pcp has been configured between two Application nodes. The database is in the seperate node with OS Cluster.
    I wanted to configure Workflow notification mailer. For that i have logedin through OAM workflow-->It is showing as
    Nitification mailer -unavailable
    Agent listener --     Down
    Service component --     Down
    Background Engine --     Down
    Purge --           UP
    Control queue cleanup -     Down
    I have Navigate to Service component screen,
    There all the Automatic component are showing status as stopped with error, I clicked the "workflow agent listener service" of container all the services are up and "state" is showing as "activated" Node it is showing as "Primary node of PCP"
    But when you click on any "stopped with error" service to start, It is throughing " The Service Component Container is not running" when i click on "view log" it is not showing any message seems like hanging.
    Before starting the Notification mailer configuration i wanted to rectify the above issue.
    Can you pl help us out in rectify the same.
    Thanks and Regards
    Vasu

    Check the log file from the server itself; it should be under ($APPLCSF/$APPLLOG/FNDCPGSC*.txt).

  • The Service Component Container is not running

    Hi All
    When I tried to start any of the services in the services components in the
    OAM , I got the error 'The Service Component Container is not running'
    I already did the required configuration steps required to integrate the
    workflow mailer with Email
    I am on WF.G
    The error in the view_log is : FND_WEBFILE.GET_URL (CPID=0)
    Any idea?
    Thanks in advance

    Have you verified that the concurrent manager Workflow Mailer Service is running. You can check this from the System Administrator -> Concurrent -> Manager -> Administer. You will have to make sure the Workflow Agent Listener Service is also running.
    Then start the mailer and agent listener components.
    If you still have trouble starting them up, following are the things to check out.
    1. check out if the Concurrent Manager env set up is correct. $APPL_TOP/admin/adovars.env is the file that contains env variables such as AF_CLASSPATH. This needs to point to right Java libraries that contains aqapi, jmscommon etc.
    2. The concurrent manager log files are written to $APPLCSF/$APPLLOG directory on the concurrent tier. The Service Component Container log files are named as FNDCPGSC9999.txt where the numeric part if the PID.
    3. Please refer to metalink note 242941.1 for more information on setting up and troubleshooting the mailer.
    Hope this helps.
    Vijay

  • ERROR: The Service Component Container is not running: Standalone Workflow

    We're trying to get the java notification mailer established through the OEM 10g Application Server Control. But the mail agent listener servlet container (WFALSNRSVC), and the mailer service servlet container (WFMLRSVC) are not running. Because of that, I cannot get any other parts of the mail configuration running. Note, I can successfully complete getting through the 8 steps of the "Workflow Notification Mailer" configuration (e.g. IMAP and SMTP mail accounts work fine and are accessible from the Workflow application server). What's the trick to getting the servlet containers running?? All I find in Oracle documentation is that these must be running before you can do anything, but I don't find anything on troubleshooting when they are not running.
    Thanks.

    Hi,
    I'm having the same problem as you did.
    I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
    And it showed
    An error has occurred!
    The Service Component Container is not running.
    Should I uninstall my Oracle Workflow?
    And install a new installation of Oracle Workflow?
    What does it mean by the "wfinstall"?
    Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
    Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
    Or should I uninstall all of my Oracle installation and start installing from the beginning?
    BTW, what if I don't use (or have) OID?
    Is it required?
    Any clue would be grateful.
    Thanks.
    Buntoro

  • Workflow mailer,The Service Component Container is not running.

    Dear,
    We ar on 11.5.10,
    We make clone our pord instance and try to up work flow notification but when we do this system ever time raise an error "The Service Component Container is not running.".
    any body idea.

    Hi Keen,
    Please check the workflow mailer log for any errors.
    See if the below notes help you:
    Workflow Mailer Goes Down Very Often Service Component Container is not Running. [ID 957884.1]
    'Service Component Container is not Running' when Trying to Start Workflow Components [ID 733335.1]
    Please also see link:
    https://forums.oracle.com/thread/2258324
    Hope this helps
    Best Regards,

  • Good morning, I have the following problem. I can not start Adobe Muse on my computer because I get a box Assertion Failed in file "... \ src \ ape \ DOMFontProvider.cpp" at line 482: numFontadded = = 1  Doregisterfont fail to add font. Check museapp \ he

    Good morning, I have the following problem. I can not start Adobe Muse on my computer because I get a box Assertion Failed in file "... \ src \ ape \ DOMFontProvider.cpp" at line 482: numFontadded = = 1
    Doregisterfont fail to add font. Check museapp \ hello \ resources for missing files

    Are you still facing the same issue ? if yes then please post the screenshot of exact error and few details such as if you are getting this error while opening a specific file or on double click on Muse itself ?
    Thanks,
    Sanjit

  • After downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    additional info.
    I have found the correct error definition in english.
    "can not start the device (Code 10)"
    I have updated my bios to the latest version.
    I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
    I have tried to uninstall and reinstall all webcam drivers - no luck

  • I'm being charged three times for the same service and I can not use it

    Hello, A few months ago I tried to buy Adobe Creative Cloud when putting the data on the card told me that there was a mistake, then I tried other cards ... in short, I'm being charged three times for the same product twice a card and once in another obviously no "mistakes", the problem is that I can not use the product. I want to give low in all three accounts and also be compensated for the time they have charged me three times. Please, I need to solve this urgent problem.

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears.   I have tried connecting the iP

    I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears.   I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac).   What else can I do?

    You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
    If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
    I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
    Snow Leopard can still be purchased in the U.S. Apple Online Store.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

  • KIMYONG:  "Service Component Container Not Running"  error 시 조치사항

    KIMYONG: "Service Component Container Not Running" error 시 조치사항
    Purpose
    WF Agent Listener 를 구동하고자 할때 아래 error를 발생하며 멈추게 됩니다.
    이를 조치하는 방법은
    ERROR
    CANNOT START 'WORKFLOW AGENT LISTENER - ERROR:
    "THE SERVICE ERROR COMPONENT CONTAINER"
    Solution
    전체적인 절차는 아래와 같습니다.
    1. apache 를 bounce 합니다.
    2. Workflow Mailer Service를 시작합니다.
    a. Workflow administrator Web Applications Responsibility
    b. Workflow Manager
    c. Click on Service Components icon
    d. Click on the Workflow Mailer Service link (Container column)
    e. Select Workflow Mailer Service
    f. Select Start from the list of values (top)
    g. Click on go.
    h. Wait until the Workflow Mailer service is "Activated"
    3. Workflow Agent listener Service 를 시작합니다.
    a. Workflow administrator Web Applications Responsibility
    b. Workflow Manager
    c. Click on Service Components icon
    d. Click on the Workflow Agent listener Service link (Container column)
    e. Select Workflow Agent listener Service
    f. Select Start from the list of values (top)
    g. Click on go.
    h. Wait until the Workflow Agent listener service is "Activated"
    4. Workflow Mailer를 시작합니다.
    a. Workflow administrator Web Applications Responsibility
    b. Workflow Manager
    c. Click on Notification Mailers icon
    d. Select Workflow Notification Mailer
    e. Select Start from the list of values (top)
    g. Click on go.
    h. Do the same for the workflow deferred agent listener
    Reference
    Note 559388.1

    Hi,
    I'm having the same problem as you did.
    I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
    And it showed
    An error has occurred!
    The Service Component Container is not running.
    Should I uninstall my Oracle Workflow?
    And install a new installation of Oracle Workflow?
    What does it mean by the "wfinstall"?
    Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
    Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
    Or should I uninstall all of my Oracle installation and start installing from the beginning?
    BTW, what if I don't use (or have) OID?
    Is it required?
    Any clue would be grateful.
    Thanks.
    Buntoro

  • Error Service Component Container for Java Mailer is not running

    Hi,
    I installed Oracle Workflow 2.6.3 (Standalone) in Oracle Database 10g Release 1.
    Actually there was no problem during the installation.
    I have done the Setting Up from step 1 to 8.
    I'm going to do the step 9 (Implementing Notification Mailer).
    The problem is the Workflow Agent Listener WFALSNRSVC is not running
    and I cannot run it using the Oracle Workflow Manager.
    In the Oracle Workflow Manager there was 4 rows which related to the Container : WFALSNRSVC
    1. Workflow Deferred Agent Listener
    2. Workflow Deferred Notification Agent Listener
    3. Workflow Error Agent Listener
    4. Workflow Inbound Notification Agent Listener
    The status is : Stopped.
    I cannot run any of them.
    Although the Startup Mode is Automatic, but none of them is running.
    When I tried to push the Go button to Actions: Start, it showed this message
    An error has occured
    The Service Component Container is not running.
    And after I tried to configure the Workflow Notification Mailer using the wizard
    I didn't receive any e-mail after I push the Test Send Mail button.
    I read in another post in this forum.
    It states that when going to the Workflow Configuration Assistant (WFCA)
    we must give the right entry in the LDAP paramaters and Java Mailer parameters,
    otherwise those WFALSNRSVC and WFMLRSVC would never run eventhough we enter them in a later time.
    Actually I didn't provide the paramaters (both of them) since they are optional.
    My questions are:
    1. Is there another way to run those service (servlet)?
    I really need the Java Notification Mailer to send email.
    2. Should I uninstall and reinstall my Oracle Workflow and provide those paramaters?
    Do I have to uninstall and reinstall the Oracle Workflow Middle Tier too?
    3. Is it okay if I drop and cascade the OWF_MGR user (my Workflow Manager schema)
    and then I use the Workflow Configuration Assistant again and choose Install option
    to create the OWF_MGR schema?
    3. Are the LDAP and OID required before we use the Java Notification Mailer?
    Actually I didn't understand the use of LDAP and OID which required in the LDAP paramaters?
    Any help would be grateful.
    Thanks,
    Buntoro

    In the service components page click on any container, select stop all from the LOV and Go. Once all the containers Workflow Agent Listener Service,
    Workflow Document Web Services Service and Workflow Mailer Service are Deactivated then StartAll. After all the containers are started then check the components status.
    Still if they are running bounce the apache.

  • Can not start data Collection service

    I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
    I also could not stop it. I rebooted the server and the status for this service is in starting.
    Thanks,

    Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server.  Have you considered using a newer version of FM Server?

  • When I try to download itunes i get a message that the services can not start and I may not have enough privileges. What is wrong?

    When I try downloading itunes it stops with a message that says the mobile service can not start because I may not have enough privileges. What do I need to reset?

    Hello, bradhannan.
    This sounds like a possible permissions issue.  Try these steps.  Uninstall iTunes and all of it's components.  Next, download the newest version of iTunes and save it to your desktop rather than selecting run.  Right click on the installer package and run as administrator.  I have included a couple articles that covers how to uninstall iTunes and all of it's components. 
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Regards,
    Jason H. 

  • HT6117 Error : Can not start the service "Apple Mobile Device"

    I get this error message of Can not start the service "Apple Mobile Device" please verify if you have enough permission to start a service. I have tried reinstalling itunes but could not get rid of the error. I use Win 7 64bit OS. Please help me to resolve the issue
    Thanks
    Venky

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

    Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
    It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming: 
    Windows could not start the FLEXnet Licensing Service service on Local Computer
    Error 1068: The dependency service or group failed to start.
    I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service. 
    Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

    Hi Don1233,
    Please consider seek help at the software vendor side.
    For the services didn't start, follow the suggestions posted by Elton in the thread below:
    https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
    Best regards
    Michael Shao
    TechNet Community Support

Maybe you are looking for