The "Gmail" Google IMAP account could not be removed

I am unable to remove the Gmail imap account from the Mail client 7.0 instead I get the following message:
Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”.
You can try deleting the account from the “Internet Accounts“ preference pane in System Preferences.
I tried deleting the Mail app, and the Mail folder from the library but that did not solve the problem, the Gmail IMAP account still shows.
I was able to remove the iCloud account from the Internet Accounts in the preference pane in the System Preferences. But the Gmail IMAP account still shows in the Mail app.

Yes!
Fixed it, by deleting the com.apple.mail from the ~Library/Containers.

Similar Messages

  • "The older version of itunes could not be removed"

    This is the error message I receive. I've already tried going to start->control panel->add/remove programs. Same error message. However, it removed enough of the old itunes that I cannot run either the new version OR the old version.

    okay. with that one, let's try the following procedure.
    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
    Description of the Windows Installer CleanUp Utility
    next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
    Removing iTunes and QuickTime for Windows
    now try another itunes install. does it go through properly this time?

  • InfoSpoke error: Table could not be removed

    Delta enabled InfoSpoke
    Destination is table
    Delete Table Before Extraction is checked
    Technical Key is checked
    Extraction happens in a process chain
    This has worked in the past, but failed today with the following error:
    /BIC/OHZIS_FII81 could not be removed
    There is no short dump in the system around that time. SLG1 shows the failure, but no details. Nothing in system log.
    This error message appears in the InfoSpoke monitor screen. How can I get further information on this error (without having to bother DBAs)?
    Any idea what has caused this error? Is there anything I can do to prevent such failures in future?
    Any help is appreciated. Thanks for your time.

    I looked in SE11 just now. Table doesn't exist in the database (but exists in the dictionary, as expected).
    Why did the extract fail after successfully deleting the table?
    Thanks.

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

  • Hi, I can not buy my own account and the following message   "your purchase could not be completed"    غخع

    Hi, I can not buy my own account and the following message   "your purchase could not be completed"

    Hi
    Have you got cookie blocking enabled in Safari?

  • Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
    I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
    BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

  • I can't connect to itunes store the alert error says "itunes could not connect to the itunes store. An unknown error occurred (0x80092013)"

    i can't connect to itunes store the alert error says "itunes could not connect to the itunes store. An unknown error occurred (0x80092013)"

    Hi all,
    I have the same problem with my Windows 8.1 laptop and my guess is that since I changed my Internet Provider who now delivers IPv6 addresses the problem occurs. A frieend who has a different provider does not have the problem in his home, but when he tries using iTunes at my home with my network he gets the same problem.
    I have already solved a previous problem with Outlook 2003 not being able to receive emails from my wifes GMail account although everything else worked fine. The solution here was to enter the IPv4 address of Google POP-Server in the hosts file, overriding the IPv6 address.
    Maybe something similar helps with this iTunes error.
    If someone knows the hostname of the iTunes Store server, it could be pinged and the IPv4 address could be determined and then entered in the HOSTS file.
    I'll continue trying in this direction and will post a solution if I find one.
    If someone has the iTunes server name or IPv4 address, please post it.

  • ICloud mail account could not be enabled

    Since I have updated to Mavericks I have been having difficulty with "Mail".  I had 4 accounts; two of which were gmail accounts.
    After reading about the gmail issues, I was hoping that the recent "Mail Update for Mavericks" would solve my issue. Unfortuantely my issues remain.
    The problem first began with the program taking minutes (up to 10 min) to load; forcing me to force quit the program many times.
    I slowly deleted the various accounts from my icloud account. Interestingly in the System Preferences under "internet accounts" it would initially not display all of the accounts that I had listed in the mail program. It would also take 10 min to load the accounts into the Accounts Pane on the "internet Account" dialog.
    Even after deleting each of the accounts; including my icloud account and then only re-enabling my icloud account things didn't get better.
    Now "mail" doesn't load at all. And I can't enable "mail" in the Icloud system preferences.
    It times out after 3-5 minutes saying "Your iCloud mail account could not be enabled. Try enabling it again". Of course; trying again gets the same message.
    So I'm stuck not using "Mail" at all; and I don't know what the issue is.
    I've moved on to "AirMail" and it is working fine. But would like to use "Mail".
    Any one else getting this???

    I had this problem & found these instructions, it worked everything as it was before the upgrade now, except I've lost the old email accounts I deleted.
    The problem was caused by dodgy entries in the accounts.plist file in my User Library folder. It appears that either when I upgraded to Mavericks this file gained many thousands of duplicate entries, or maybe these entries were in there before but previously the OSX/Mail combination was more tolerant. When I removed these the problem with Mail disappeared. Here’s what I did….
    1> Make the user Library folder visible - in Mavericks this is a lot easier than Lion/Mountain Lion. Simply open up your user directory in Finder, select menu View>Show View Options, and select “Show Library Folder”
    2> Navigate through username>Library>Mail>V2>MailData and select the Accounts.plist file. If this file is multiple megabytes (mine was 40+mb) then this is likely the cause of your problem (once sorted mine ended up at 19k in size!)
    3> To be safe, make a copy of this file (I placed the copy on my desktop).
    4> Using your chosen text editor (I used Text Wrangler but I’m sure TextEdit would work just fine) open the Accounts.plist in the MailData folder (not your backup copy) and take a look. If it’s the same as me you will find hundreds and hundreds of entries for the same mailbox repeated in there. Mine was an old MSN mailbox that I never use any more (I’ve seen in other forums that other Hotmail type accounts also seem to be the culprits in this context). There will likely be two lots of repeated data, one in the XML “DeliveryAccounts” <array> section, and one lot in the “MailAccounts” <array> section.
    5> Delete (keeping in mind the need to select the XML sections correctly from <dict> to </dict> completely) all those extra entries that you found, keeping the mail accounts you do need, in the XML and save the file.
    6> Mail should open up nice and fast again and not eat your system
    7> If this did not work, and causes problems because of over eager deleting in <5> you can replace your broken Accounts.plist file with your backup and try again.

  • Error -Account 'Down-payments clearing account' could not be found for area

    When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
    Account 'Down-payments clearing account' could not be found for area 01
    Message no. AU133
    Please help me to rectify the same.
    Thanks in advance
    Deepak

    HI
    Please pay attention at  the possible causes of message AU133:
    1. Error AU133:
       a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
    structure.
       b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
    2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not  permitted.Check whether your account determination is correct               
       (Transaction AO90) in Asset Accounting Customizing. The same applies
       for the 'Contra account: Down payment posting'.
    3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
    4.Check if you need  revaluation accounts in depreciation areas involved   (AO90):
      -Revaluation acquis. and production costs
      -Offsetting account: Revaluation APC
    Please run also programm RACKONTO where missing or wrong customizing
    the accoutn determinations per company code is displayed
    Also have a look at note 7595 in this regard.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • HT201210 I can't restore my child's ipod touch due to itunes stating the ipod software update server could not be contacted or is temp. unavailable which I have several times & tried the resolution steps on the error page & the ipod won't restore  please

    When I was updating my child's ipod touch with itunes....it put the ipod in recovery mode and said I would need to restore and then update....which was my only option to choose, so when I chose restore & update....after going thru it seemed the process, then a window came up that stated the ipod couldn't be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable and to try again.  After trying this several times unsuccessfuly and going thru the steps on the help section, the ipod is still not able to restore & update, thus we can't access anything on our very new ipod touch and I am very frustrated, can't afford any Apple support tech time.  PLEASE HELP!!

    Try:
    - Powering off and then back on your router.
    - The Additional Information paragraph of
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Help! I keep getting the following message: the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

    Hi,
    Since downloading the updated version of itunes around May this year I have had the following problems:
    1. This error message appears when my windows account launches:
    the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
    2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
    3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
    You can guess that I am not a very happy bunny with itunes at the moment!
    Please, can anyone suggest how to sort this lot out.  I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library.  I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
    Thank you for your time.
    Michelle

    Thank you.  I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone.  If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
    I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things.  He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
    Michelle

  • HT201210 Trying to restore ipod and keep on getting error message: the ipod software update server could not be contacted. the network connection was reset

    Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • IPod Touch 4gen disabled "The iPod Software update server could not be contacted" Make sure your network settings are correct and your network connection is active or try again later.  Please help!

    My daughter forgot her passcode.  Her iPod Touch 4gen is disabled.  I've tried everything I've read online.  I get to the "Restore" part on iTunes and then I get the message, "The iPod Software update server could not be contacted.  Make sure your network connections are correct and your network connection is active or try again later."  How can this be so hard to do?  Why isn't there a simpler solution.  I live 2 hours from the nearest Apple store.  Any advice you may offer would be very much appreciated.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Becouse of expire of credit card I updated billing information by providing data of new credit card but system just says "We're sorry, the billing information on file could not be used for this payment. Please update your information.". What exactly is wr

    Becouse of expire of credit card I updated billing information by providing data of new credit card but system just says "We're sorry, the billing information on file could not be used for this payment. Please update your information.". What exactly is wrong?

    Are you 100% sure that every detail of your information is the same in each place?
    Make sure that EVERY DETAIL is the same in every place you enter your information
    -right down to how you spell and punctuate the parts of your name and address
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -Credit card https://helpx.adobe.com/utilities/credit-card.html

  • Geting this errror, eventhough information is ok: We're sorry, the billing information on file could not be used for this payment. Please update your information.

    Geting this errror, eventhough information is ok: We're sorry, the billing information on file could not be used for this payment. Please update your information.
    And please remove one of my unassigned user.

    Are you 100% sure that every detail of your information is the same in each place?
    Make sure that EVERY DETAIL is the same in every place you enter your information
    -right down to how you spell and punctuate the parts of your name and address
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -Credit card https://helpx.adobe.com/utilities/credit-card.html

Maybe you are looking for