The good news:new firmware for n97/n97mini

new firmware for n97/n97 mini
The nokia world 2010
update to symbian^3

I don't know about the upgrade to ^3, and frankly it might not be possible to port symbian^3 to the ol' n97 .... But i still hope that this new "upcoming" update makes the n97 better......
And i also wish it releases at nokia world 2010, b/c if it does, it will be worth the wait

Similar Messages

  • When will Sweden get the new v20 firmware for N97?...

    OK, third attempt. This time I will not make any harsh comments directed at Nokia as they have threatened to remove my account.
    Please, please, pretty please with sugar on top, when will you release the v20 firmware for unbranded Swedish N97? I would be super-duper happy if you would release it very, very soon and I would be even more happy if there was any kind of schedule for the release. I see that many, many other regions have it already but not the Nordic countries.
    Former owner of E90, N97 x2, E72, N8 and current owner of E7.

    Sadly all you can do is wait like many people in many other countries have to do.  Shouting, ranting, threatening nokia on this forum will not get you any results whatsoever.
    Nokia will not give you a date for a specific country, they never do because in most cases they do not know.  Different countries have different approval processes and some are more efficient than others.
    Take a look at the software updates board and see how many people are in the same boat as you.  UK users have been especially vocal about it on a thread that I started. We managed to keep that thread constructive which lead to comments from nokia and coverage in the UK press.
    It's a poor situation that for the moment we are stuck with.  Anyone that doesn't like it is welcome to foot with their feet.
    As for v20 on the N97 you really need to fully reset the phone (dial *#7370# which wipes all data from phone memory) after installing it to get the most out of it.  Before a reset it's ok, after it's been great for me so far.
    Also for the lens and GPS issues it's entirely at the care points discretion if they lend you a phone or not.  Care points are independent companies, not run by nokia.  Again some are more efficient than others.
    Message Edited by psychomania on 30-Oct-2009 01:22 PM

  • So, are we going to have the new v30 firmware for ...

    After talking about new v30 firmware for the N97 we got the v22.0.110 which is good and fixing all the known bugs.
    So are we going to have the v30 firmware or not?

    as an N97 user I also hope there will be updates , but fear it will be left dead in the water , the severe memory limitations of the phone restrict how much can be done and so I expect it's had it's day Hope I'm wrong , but not very optimistic , hoping Symbian^3 will give the experience I had hoped for !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • When will Sweden get the new v50 firmware for noki...

    When will Sweden get the new v50 firmware for nokia 5800? Why is our country amongst the last few to get available updates?

    I live in the US. I should be the one complaining! As an American, I'm not used to waiting forever for everything. The US is a large market Nokia neglects. Of course, few of us buy its phones but that's the company's fault for making so many **bleep** models. Many nations don't even get updates at all! They're still stuck on firmware 3. Trust me, you have it good up there in Sweden.

  • When will new update (firmware) for E72 will come?

    when will new update (firmware) for E72 will come?

    Firmware update for E72 has already been released..
    v22.007 has been around for many European models since around January
    v23.002 has been around for Asian/Middle-East models since this February.
    Some operator-branded phones may not have available updates yet though.
    You can use the Device Software Update page (search for the links in Nokia website) and enter your product code to find out if your product code has been included in the firmware updates already. 

  • New BIOS firmware for B590 Notebook (20206)

    Hello.
    Where can I find new BIOS firmware for B590 Notebook (model 20206)? support.lenovo.com provides an earlier version (08 Oct 2012), but I need at least the same as in the notebook now (15 Nov 2012).
    Just wait for a new firmware becomes available at lenovo.com?
    How can I find out when it will happen or whether happen at all?
    Or at least how to save the current BIOS? Preferably by regular means. It looks like Lenovo utility can only update (and reported that the installed firmware is fresher).
    Thanks.

    Still nothing. Is there any hope?

  • After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

    After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

    Restoring the iPhone will reload its firmware.
    Plug the iPhone into (the current version of) iTunes on your computer.
    Let it sync.  Then choose "Restore" from the iPhone's summary page in iTunes.

  • Need the V20 firmware for N97!!!

    Hey Nokia, you announced the latest firmware to be available in october, but we are in the late october now and still no V20 available for N97...I`m very dissapointed on this fact,because I spent a lot of money buying this phone!Maybe you forgot to mention what october...2010,2011 or else???Don`t let us wait so much,pls!!!This phone really needs updating...its look is far different from its performance and I think every N97 user agree with this.Can`t wait for the update!No offence still!

    I think it is wrong to count down the days, v20 will come when it comes. Past experience should teach you Nokia may well release it in December. They will do so when THEY are ready and in the mean time they will not confirm or deny anything, that is the way they are.
    If i make a commitment to do something next Friday, then realise by Wednesday that I will not be able to, I would contact you and explain why and the estimated delay, basic manners !!! Nokia will not.
    But Rant on if it makes you feel better, like it or not, that is all you will achieve. Actually No! you will not feel better untill you get v20. It wont fix the bugs you hoped it would and it starts all over again.
    Here is an idea. Get used using your 97 as it is. Dont update to v20 because you will only get frustrated learning ways to overcome the newe flaws in it. Shut this forum down and live happily ever after.
    George
    De Criminalised 0570817: RM-505_EMEA_EURO_QW1 Black on Vodafone

  • What is the good voice xml api for java

    dear buddies,
    what is the best voice xml api for java? has somebody comeacross and work involving this, i would like to hear more about this
    thanks
    Kuha

    Maybe the VXML forum is a better place: http://www.voicexml.org/
    Good luck.

  • The next firmware for N97

    Nokia, I know you guys read this blog about the biggest disappointment in the History of Nokia (the N97). I want an exact release date of the next firmware and exact list of what is being done.. I cannot stand this RAM and C drive issues on this device.. I am using my n95-3 because N97 is not stable, not capable of multitasking, etc etc etc etc etc etc etc! I will soon trash it and record a video, or smash it on the wall.. The feeling of Smashing this phone on a wall well worths the 700$. Only reason I am not doing it because I am hoping The next firmware will give me at least 70mb free ram on boot and will clean up C drive from unwanted apps (adobe, jouki, boingo etc............. And therefore will give me at least 50mb free C!) P L E A S E list here nokia what is being worked on so i don't waste my time and totally switch back to my n95-3.

    phatdumi wrote:
    2bad wrote:
    <quote>
    The main problem for me is connectivity, I always have to re start the phone when I leave the house otherwise it will keep searching for my WLAN 20 miles away
    </quote>
    I wish people wouldn't blame the poor phone, when they don't read the manual properly. TURN OFF WLAN AUTO SCAN for goodness sake. Set the "default" access point in "WEB" to "Ask when needed", then choose whatever access point you want when you use the thing after you've left the house.
    Jeez!
    Message Edited by 2bad on 26-Jul-2009 05:22 PM
    This is my interpratation of this problem.
    (Connectivity>Destinations> Access Points) This is where you set up access to the internet and you prioritise your available connections i.e I have WLAN Priority1 and Orange Internet Priority 2 setup under an access point called INTERNET, I have therefore made this access point called INTERNET my default access point therefore I expect the phone to automatically connect to Orange Internet when my WLAN is out of range because Orange Internet is available everywhere I go. Isn't this what this feature is meant to be doing???????????????????????
      Hey 2bad am I right or am I wrong?
    Message Edited by phatdumi on 27-Jul-2009 04:04 PM
    Hit Kudos if I Helped out.
    Nokia 3310-> 8810->N95->N95 8Gb->
    Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)

  • New drivers / firmware for CDRW? and which one do i have?

    hi, i have the Dragonwriter, the sticker on it says made in June 2002.  It reports during startup, and in Device Manageras teh CD-RW MS-8340 firmware version 100d.  It also says the driver is from Microsoft 4-23-99, but then goes on to say no driver is loaded or required for this device.  
    Very weird.
    I can't yet find any update files on the MSI site ... i found a description of the 8340 which is listed as having a writing speed of 48x ... but mine is more like the CR-40, as it only has 40x according to the label on the box and front of the burner.  So shouldn't my drive be reporting something other than 8340?
    In any event, the Nero 5.5 s that came with the drive only lets me burn at up to 32x !  Have i been ripped off somehow?
    so i'm all confused, can someone please set me straight as to if i need to upgrade or change my drivers/firmware/bios etc?  And is it Nero's fault or my drives fault that i can't get the option to write at 40x?
    thanks!

    thanks guys!  yes, now that i've put a 40x disc in the drive, it is indeed now giving me the option to burn at that speed!  
    i still need to sort out a problem with the firmware updater.  This is what it spits out:
    Detecting CD-ROM drives (check 2 IDE cables, 4 ports)
    Checking IDE #1 ok
    Checking IDE #2 ok
    No CD-ROM drive are detected
    that seems weird eh?  I most certainly do have my cd-rw on Secondary Master, and cd-r on Secondary Slave.  Perhaps is this the stupid message it returns with if the firmware doesn't need updating?  
    btw, how to know what firmware i have?  It says 'firmware revision 100d' in Device Mangler, if that is the correct one.  Does anyone know to what version the vow-dos.exe updater is set to update to?
    cheers,
    charlie
    Quote
    Originally posted by bim2k
    Hi,
    IIRC the newer burners "test" the media quality to determine the fastest speed it will use for that media.  I've burnt my 24x Verbatim CDRs at 32x without problems :D
    Haven't bought the 40X Verbatims yet, so can't say if it burns full speed with rated 40X media ?( but it SHOULD work
    BIM2k

  • New OVI Maps - For N97 GPS problems fix

    Its Suppose to be the solution to the GPS issues with N97 , honestly i didn't try it yet
    my 1st choice was to uninstall the old maps & get back to maps 2.0 hopefully it well work this time 
    heres the link http://betalabs.nokia.com/ovi-maps

    i have the latest maps installed 3.3. b07 and it seems to work fairly well which i could not have said about any prior release. 3.1 was a complete disaster in my case. give this new one a go and see how it works for you. i am for a moment impressed. it has not crashed my phone and actually seems to work, imagine that !!!
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • New radio firmware for 4.0?

    Anyone know if the radio firmware is changing in 4.0? I have an iPad with 3.2 and it behaves a bit better for 3G/Edge change-overs, so I'd like to know if this improvement will be folded into the iPhone 3GS.

    And related to this topic, will 4.0 run on the 3G S? Rumor has it, if a new iPhone is coming out in June or July, that the new phone contains the same CPU as the iPad. I'd think there'd be other differences between the two generations of phones, too. Perhaps I answered my own question...

  • New iPlayer update for N97

    I've just installed the iPlayer update as promted when opening the app today.  Now it doesn't recognise my device as a Vodafone network and won't allow me to stream programs without a WiFi connection.
    Any ideas what might have gone wrong and how I might be able to rectify it?  Would installing the previous version of the app help?

    The new 'app ' is simply a link to the web site, there is no longer a widget available and the mobile site has simply been optimised for mobile use and shouldn't be any different to simply going to the mobile site via web browser as that is in effect what you're doing anyway !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Need new driver & firmware for HL-DT-ST DVDPAM GSA-T30 FOR MY COMPAQ 6830S

    Model HP Compac 6830s laptop.
    operating system windows 7 professional service pack 1
    I cannot burn dvd-r disks.
    I get a message to install drivers.
    I used devicemanager to unstal the device driver.
    Rebooted system,  found new hardware-installing
    Did this twice,  Still unable to record

    malper wrote:I cannot burn dvd-r disks.
    Hi,
    From my memory HP laptops used to write to DVD+R only. I don't know how far back.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • HP pro x2 410 g1 on Windows 7 ... TouchPad Not Working! Keyboard works fine.

    I am currently trying to set this up on Windows 7. I have tried both x86 and x64.  I am haveing no luck however finding the driver for the touchpad.  The keyboard works great but I am currently having to use a USB mouse.  I have tried a bunch of Syna

  • WH Tax - Down payment clearing against invoice

    Dear Experts, This is regarding the down payment clearing against invoice where WH tax is involved in Down payment as well as in Vendor Invoice. we also deduct Work Contract Tax Z1 on vendor invoice. the process is as follows : Step 1 - Down payment

  • WebUtil Demo Runtime "Bean not found" Error

    Hi.. I am getting following error sign_webutil.bat C:\DevSuiteHome_1\forms\java\jacob.jar Generating a self signing certificate for key=webutil2... keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> already exists There were

  • ODI 12c Incremental update taking indefinite time

    I am trying to load data from database  view  data into staging tables . When i load with out key on target it loads data loads very fast when i define key and change KM to Incremental update then it is taking more than 12 hours and still running Ple

  • ISE Primary/Secondary max latency

    Hi There, My understanding is that you can run ISE with one node set as primary and zero or more nodes set as secondary, with the secondaries located closer to the end points. 1. Does this mean the local users closest to a secondary node will authent