The gps does not find satellites. Why?

I have a 8900 and my GPS has always worked perfectly.
But now finds no satellites. Do not pick up satellites in outdoor or indoor.
Do not know if it was trying to install a program for geocaching (LUCIFY).
This program gave error certeficates.
A red cross appears in some certeficados like these: DOD CLASS 3 CA ... / ORC ECA1, ECA ROOT CA and TC TrustCenter CLASS and Verisign / RSA secure server root.
These are some certeficados that are red with a cross.
I've done wipe, I changed the OS and still not pick up satellites. Why?

Are you doing the Satellite refresh in this manner, as outlined below?
AND, have you remove the Lucify application and tried the refresh?
On all model BlackBerrys, first make certain that you in an area of good signal coverage AND outside with a clear view of the sky in an open area of no tall buildings.
For GSM network devices, do this:
Click Options > Advanced > GPS > Menu > Refresh GPS.
Give it up to 10 minutes to refresh, and try 2-3 times in a row.
For the 9800 model:
1. On the Home screen or in a folder, click the Options icon.
2. Click Device > Location Settings.
3. Press the Menu key > Refresh GPS.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

Connecting c309a to a wireless network, the printer does not find my mobile hotspot connection.

I switched to a mobile hotspot w/verizon. I had set up my computers (2) just fine the first time. I had to exchange the hotspot. I was told by my computer to insert a flashdrive and transfer my network settings to the printer and other computer. After inserting the flashdrive into my photosmart c309a printer, it flashed "turn off and on" I did, then the printer had lost the network settings menu altogether! I took it to bestbuy to be looked over and was told they were able to get my network menu back but it was still unable to register a wireless connection?? I'm not sure what to do now?

Sometimes DSL providers have more control over the router than the printer likes. There is what I believe to be a similar situation here in the states with ATT 2Wire routers. This is a cut and paste from instructions on how to fix that. Try it and see if it works.
- Unplug the telephone line from the router
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Go through the normal process of connecting the printer to the device.
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- In screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 255 (the last number in the address).
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Use the router's IP address for the gateway and the first DNS (leave the second blank).
- Finally, plug in the phone line and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Lightroom 5 - Update from 5.0 auf 5.7 does not work. When I try to do the online update I get a message the programm does not find an *.msi file. Any ideas ?

Lightroom has been installed on my Laptop with a DVD.
In the Adobe Programm Folder on my harddrive I do not find a *.msi file.
Any ideas ?

Hello I was not sure where to find the right temp Folder. So I deinstalled the program and installed it again.
But with the same negative effect.
There are two ways for the update:
1) Within Lightroom: search for newer Version.
2) At the Adobe Website
1) Did not work
2) worked perfectly
Thanks for your help

The iPhone does not find the device. Bluetooth app needed?

Hey I just bought wireless headphones. My problem now is that my ipad can find them, but not the iphone. You know what I can do there? Need I some extra app for the iphone to use them with Bluetooth?
Thx

iAlphan, to catch you up to where Rafi is, we need to see if you can discover your NXT outside of LabVIEW or MINDSTORMS. I'll assume you're using Windows; if you can confirm and also tell me which version, that would be helpful.
If Bluetooth drivers are running on your machine, there's usually a Bluetooth icon in the system tray. (If not, you can look in the Control Panel.) If you open the native Bluetooth wizards / dialogs by double-clicking on that icon, are you able to find your NXT? If not, you've got a more fundamental problem than Rafi related to your Bluetooth adapter and the loaded drivers. If you can find it using that method, well, try again from LabVIEW and report back with any progress.
By the way, just to eliminate the obvious, have each of you turned on Bluetooth on your NXT? You'll know Bluetooth is on if you see the triangle icon and a "less than" sign ( < ) in the top left corner of the NXT's screen.
(edit: add space so "less than" sign isn't turned into an emoticon)
Message Edited by James B. on 02-18-2009 06:18 PM
James Blair
NI R&D

I set a poster frame in the timeline, but the thmbnail in the menu does not update. Why?

I have used poster frames correctly in other projects before, also in encore cs6.
In this project, it's not working.
haveing had it working before, i'm sure its nothing to do with the OS, or media type, since that was the same in my previous projects. Any other ideas as to common causes?

I've seen weirdness on this one myself. Usually changing the poster frame by a frame or two clears it up.
I've actually gotten into the habit of setting my poster frames before I make the chapter links. That way it always works.

I have FIOS. I linked my FIOS router via ethernet cable to an Airport Extreme. I want to extend the range using an Airport Express wirelessly; however when I plug in the Express, the network does not find it.

Any help is appreciated.

Make sure the ethernet cord is plugged into the WAN port on the Aiport (the port with a circle of dots above it) and do a hard reset (hold the reset button until the light blinks rapidly.) It will not automatically appear in the Airport Utiltiy. You are looking for the airport under the wifi menu after a few minutes or in Settings>Wifi on an iOS device that you can click to join and continue to setup.

Software does not find the Database server

Hi all,
We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
I checked everything as from the link described:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
Also at the new server we have another production DB that is running without any issues...
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond 195.30.95.163:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()

It looks like the connection is getting refused because of your application configuration.
Refer similar thread
http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
-Prashanth

Re: Satellite A350D - Does not find any WLAN network

Because the e-mail-support page doesn't works at the moment (after sending a message I only get a blank page) I will ask my question here.
Since maybe 2 or 3 months my connection to WLAN-networks is really bad. I have nothing changed, neither the Windows version (Windows 7) nor drivers, but it does not work as good as it was.
Some examples:
I'm sitting 5 metres away from the wlan router. Only a wall is seperating. The notebook does not find any wlan-network. With my HP notebook the connection is good. I'm sitting on the desk where the router stands. The notebook finds the network, but Windows says connection seems to be only average or bad. My HP notebook has the best connection rating.
Anybody here who can help or can say how I contact the support per e-mail without getting only this blank page?
Greetings Schlachtvieh

Hey,
After WLAN driver update make also sure that power saving mode is disabled for WLAN card. You can do this in Windows Power Management.
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
Driver update in such cases its always advisable but in my case it was the power saving of WLAN card. :)

GPS does not appear to work with data-roaming off and no wi-fi network

I have been using an application called imarkmyspot to produce way-points for synchronising with my camera. When I am in my home country this works fine and a GPS location is found quickly.
I've recently been abroad and had data-roaming turned off to avoid high expense. The point is that in this situation the GPS does not work (with imarkmyspot or Goggle Maps) unless I can access an open wi-fi network.
So my question is, is this correct? Does GPS only work with either data access on or when within range of an open wi-fi network.
If this is feature (bug) of the iPhone then this makes applications such as imarkmyspot rather useless when travelling. Alternatively it could be imarkmyspot that has this problem of course. But I'm quite sure Google Maps did not work either in this situation either.

The iPhone's GPS does work without a data connection.
Two weeks ago on a work-related trip I knew I'd be traveling a rural highway that would leave me without data/voice from any source for at least 45 minutes (no GSM service). Before leaving a city with data, I zoomed out using Google Maps far enough to show most of my route, then "nudged" the map so the application wouldn't try to get a data update for the map. I simply used the top power button to turn on and off the screen. The iPhone and GMaps tracked me through for the entire blacked-out section of my trip - I made sure the device had a decent view of the sky and it got a fix and nailed the location within a few seconds.
Ironically, I'm returning that device in the next few hours for an exchange. The GPS hardware, it seems, has failed about a week ago - the device gets A-GPS fixes now (it shows the nearby 3G and EDGE towers), but won't lock in for more than a second or two. My iPhone's GPS worked, and now it doesn't - AppleCare told me my GPS hardware has failed - and you're may be exhibiting the same failure.
Some A-GPS devices use their sources to get close by - like my TomTom GO and the ephemeris files it grabs from their servers to get updates on where satellite locations are - and then use the on-board chip to nail the device's position. From what I understand of the iPhone's assistance mechanism, the data tower's and Wi-Fi physical location needs to be correct and available in an accessible database somewhere - my iPhone was showing me near Houston TX (2200 mi/3500 km distant from my actual location) when using 3G data until the data source was updated.

Function Module where-used list does not find update rule programs

We have function modules called in update rules. The where-used list in the function builder does not find the update rule programs.
For example, function DATE_GET_WEEK is called in an update rule to InfoCube YCUBE001. The activated program name for this update rule is GP3PWI6PKM5Y3K75A370DIS8I77. When I goto SE37, enter the function DATE_GET_WEEK, click the where-used button, check the programs option and search. The system does not find the program GP3PWI6PKM5Y3K75A370DIS8I77.
Without this search capability it is difficult to do an impact analysis of changing function modules. Does anyone know of a solution?

hi,
i think the reason is the code of update rules' generated program are stored line by line in table(rsaabap), update rules program itself stored in table rsupdrout, link with field codeid, another useful table is rsupdinfo which store infocube, infosource related. other info may stored in some other rs* and rsa* tables.
try to create following program in your system, and run, type in the function module name, and will display out the update rules program id, with additional useful info : which infoprovider, infosource, and detail info of the routine and infoobject in the update rule that using that function module. you may modify the program to have better display out list.
hope this helps.
REPORT Z_FM_UPDRUL_WHEREUSED.
data : lv_sfm,
       lv_line type string,
       lv_where type string.
tables : rsaabap,RSUPDROUT,rsupdinfo.
select-options:
s_fm for rsaabap-LINE.
start-of-selection.
loop at s_fm.
    concatenate s_fm-low ' ' into lv_sfm.
    concatenate '%' s_fm-low into lv_line.
    concatenate lv_line '%' into lv_line.
    write : / 'function module', 'update rule id', 'routine id', 'infoobject', 'infocube', 'infosource'.
    select * from rsaabap
    where line like lv_line and objvers = 'A'.
       select * from rsupdrout
       where codeid = rsaabap-codeid and objvers = 'A'.
         select single * from rsupdinfo
         where updid = rsupdrout-updid and objvers = 'A'.
           write: / lv_sfm, rsupdrout-updid, rsaabap-codeid,
                    rsupdrout-iciobjnm, rsupdinfo-infocube,
                    rsupdinfo-isource.
    endselect.
    endselect.
endloop.

I was updating to mountain lion when it stopped the installation and marked an error in the disk, now the computer does not work....what can i do?!

Also the computer does not find the HD since it marked the error.
I need a way to either reinstall OS Lion or to complete the installation of Mountain Lion successfully.

Depending on what OS the computer had on it, either boot into the Recovery Volume using command - R or by holding down the option key and selecting the Recovery Volume. If the computer was using pre-Lion OS, boot from the disks that came with the computer.
Run Disk Utility and see if you can repair the hard drive. Also try Repairing Permissions. If successful, try a normal restart.

Picture app does not find pfoto

I Have 7000 photos in "Occasions from my Mac" folder sorted in nearly 400 moments/occasions
when searchin the app does not find occasions by name
MOst photos were taken with a Canon camera
before occasions was sorted in alphabetical order. Now they are not.
the commercial said "Now its easesr than ever to find your photo"
For me it is impossible
what have I done wrong?

Sorry, for posting in the wrong forum, but this actually happens on 10.6.2. I could not check this in any other version.

I just purchased my Ipad 2 64g. the main reason i purchased was to use in my airplane for live gps tracking. i have downloaded the software with the moving map and the gps will not connect in the air. it works periodically while standing outside. Any sug?

I just purchased my Ipad 2 64g. The main reason I purchased was to use the gps moving map feature. I have the paid AP but the gps does not work. Do I need an auxiliarry GPS?

Is it just the wireless 64g, or the one with 3G? If just wireless, you purchased the wrong one. Also, if you just wanted GPS tracking, a GPS would have been a cheaper solution, no monthly charges.

Why can't I find events with cmd-F? I can see the appointment I am searching for, but the search cmd-F function does not find it. Why is this. It used to work...

Why can't I find events with cmd-F? I can see the appointment I am searching for, but the search cmd-F function does not find it. Why is this. It used to work...

Why can't I find events with cmd-F? I can see the appointment I am searching for, but the search cmd-F function does not find it. Why is this. It used to work...

The gps does not find satellites​. Why?

Similar Messages

Maybe you are looking for

The gps does not find satellites. Why?