The graduated filter in my Lightroom 4 is not working properly.

When I highlight the area I want to change and start making adjustments (and the black dot is in the circle), the whole photo changes. I have used this tool successfully many times in the past and don't understand why it stopped working. Ideas?

The black dot is in the circle that shows where the graduation filter is being used. When I use any of the sliders to change what I highlighted with the graduated filter, it changes the whole photo, not just what I selected.

Similar Messages

  • Has the width and colour of the graduated filter changed in Lightroom 5.4?

    Hi,
    Has the width and colour of the graduated filter changed in Lightroom 5.4? The 3 lines seem to be too narrow, almost a hairline, and not white enough. I can barely see them on a calibrated monitor and did not have that problem before upgrading to Lightroom 5.4.
    Thanks for your help.
    Kind regards,

    Ok, je vois où pourrait se situer le problème....
    Il faut baisser la luminosité de cet écran, le mieux est de mettre la luminosité à 50% et de calibrer cet écran avec une sonde, par exemple une Syder4pro ou une autre !
    OK, I see where could be the problem...Lower the brightness of the screen, the better is the brightness to 50% and to calibrate this monitor with a probe, for example a Syder4pro or another!
    Best regards
    Yves/CH

  • One of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

    one of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

    Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2.Reset PRAM. http://support.apple.com/kb/PH4405

  • My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

    My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

    As Peter says above, only an Apple Store genius can advise you.
    But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement.  That is not necessarily true.  Let them look at it and advise you what the remedy is.  They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

  • Why is the built-in Apple dictionary in IOS7 not working properly?

    I've updated the system of my iPhone 4s to IOS 7.0 and I noticed there is a big change in the built-in dictionary. I touched the" manage" button and downloaded several dictionaries, however, I came across an issue that the Apple dictionary is not working properly. The definitions are just not there. The Oxford dictionaries are fine, but I miss the buitl-in Apple dictionary like the one in IOS6. Does anyone have the same issue?

    I had constantly wondered about the same problem and today I've finally figured it out.
    I thought 'Apple dictionary' had to be the same simple, built-in one in previous iOS versions,
    but it's actually dictionary for Apple-related terms only, I guess.
    Kinda like Apple Encyclopedia?
    Just try typing Mac and something and that 'Apple dictionary' will give you the definition of Mac, haha.
    Wish I had thought of this earlier then I wouldn't have been this disappointed LOL

  • I updated to Lion and now the Search function in Apple Mail is not working properly

    Even though the "All" option is selected, when I type a string in the Mail spotlight search box, the string is not found.  But I know for a fact the string is in an email and I've manually found the email (in a folder) and copied and pasted it into the search box.  Mail is still not able to find it.
    I have also checked to make sure that "Message contains" is the option in the search box.  I've noticed that in some previous searches there has been a little arrow dropdown option next to the magnifying glass icon.  But that arrow is not showing up consistently...and is not showing up now.
    What am I doing wrong?

    Ok...here's the steps to fix this as efficiently as possible.  I have a whole bunch of mailboxes under "On My Mac" and they have a bunch of mailboxes nested in them.  I get my messages into Apple Mail via IMAP.  (I don't know if this matters.)  The steps below assume you have a similar setup.
    1.  Hold the Option key down and click the dropdown arrow next to each mailbox that has one.  This will cause all nested mailboxes below it to appear.
    2.  Go to the top of the list of mailboxes under "On My Mac" and highlight the first mailbox.  Then hold the Shift key down and highlight the last mailbox in the list.  This will cause all of the mailboxes and nested mailboxes to be highlighted.
    3.  From the menu, select "Mailbox --> Rebuild" and the rebuild process will start.
    4.  Watch the top of the mail screen to see the message count change as the mailboxes are being rebuilt.  Wait until the activity stops before doing the next step.
    5.  As the mailboxes were rebuilt, many messages were reset as "Unread" even though every message was previously "Read."  Make sure the mailboxes you want to affect are still highlighted.  Right-click and select "Mark All Messages Read."
    That fixed the problem for me.

  • Can no longer access iPhoto from the iMovie camera browser..not working. Also the Inspector tool not working properly. Cannot change clip duration.

    How can I fix the INSPECTOR Tool?   Clip duration is not working properly, it is very erratic.  You type a number and a different one comes up on the clip.
    Suddenly the iPhoto Camera browser in iMovie is not working properly either.  Can not access my iPhotos to include them in iMovie project.

    Have you tried this?
    From the "HOME" screen, go to "SETTINGS > PRIVACY > PHOTOS" and see if iMovie is listed in the "PHOTOS" page. If it is, then tap the iMovie switch to "ON"
    Now your Videos & Photos should be accessible in the iMovie App.

  • MRS (Multi resoource scheduling) not working properly

    Hello All,
    We have MRS 610  installed in our landscape. We have configured it to integrate with Maintenance orders. We are facing an issue as to not all orders are reflected in the planning board though we make exact replica of orders which already exists in the planning board. Those orders which are there in the planning board doesnot reflect the changes that are done to it in PM module. I have checked all the demand related configuration settings and all seems to be fine. The inegration between PM and MRS is not working properly. Orders are getting pulled into the planning board if we run the report /MRSS/SGE_DEM_DATA_MIGRATION.
    We recently upgraded to SP4 level. Kindly help me to trouble shoot this issue.
    Many thanks in advance.
    Boby

    Dear Bob
    As far as I have understood that your problem is that the backward integration is not happening.
    That means whenever you are assigning a resource to the PM Order these alocation are not reflected in PM Order. Just check following points.
    1. Check weather you have activated back integration of PM or not !
    2. Check this under the node: Sources of Demands->Orders-> Control integration of PM/CS Orders
    3. Also make sure that you have activated back integration of demand type R3OR in the node Sources of demand.
    4. Check PM Settings related to Work centre
    5. Apply the Note 1135513 - MRS: Changes to standard for PM/CS
    integration
    Also please go through the Documentation supplied with the sofware Installation CD for MRS.
    It gives step by step activities how to proced with config.you will have to go through this documentation very thoroughly as all information is avalable .
    Also check this link
    http://help.sap.com/bp_serv603/ServInd_DE/html/index.htm
    This link gives  best practices for services industry.
    Go To Business Information > Preconfigured Scenarios > (Right hand side )>SAP ERP Scope >Scenarios - by Business Areas>Project Resource Management >Service Order with Resource Scheduling (MRS).
    This will serve you as guidance for configuration.
    With regards
    Mangesh

  • FaceTime not working properly

    Hi,
    I just recently upgraded to 13" i5 MBP with Lion OS. I noticed that my FaceTime is not working properly. I have an iPad 2 also and I used it most of the time for my FaceTime which is why I didn't notice that the FaceTime of my new MBP is not working properly. I was able to sign in and I tried calling my contacts with FaceTime. On my end it's ringing but on their side it's not. I asked them to call me and it would go to my iPad 2 only. With my old MBP (2009 model), whenever i get a FaceTime call, both my MBP and iPad 2 would starting ringing but with this new MBP, it's not. I can't even connect with anyone. I tried deleting the app and installing it with the lower version but i think the lower version won't work with Lion (there was a camera error). Good thing I was still able to install the FaceTime back to my MBP but I still have the same problem. Is this a hardware or software problem? Please help...I just had this MBP for barely 2 months....
    thanks in advance...

    There's a whole section on Facetime. If you don't find your answer there, post a new thread in that section.
    https://discussions.apple.com/community/mac_app_store/facetime_for_mac

  • Gasbuddy web site not working properly with firefox, but working fine with explorer

    I've noticed when I load the web site gasbuddy.com, it is not working properly. It does load, just not performing like it should. When I try using gasbuddy.com on explorer 9, it works fine. I've already tried working in safe mode and that didn't solve the problem with gasbudy.com. Any suggestions as to how to fix the problem? I did do some prior investigating, and I'm very cautious about removing my cookies. It seems when I do that procedure, I lose too much info on certain web sites----weather.com, weatherunderground, etc. Just not sure how to remove cookies to solve a problem with out causing other problems? Thank you.

    I'm glad we were able to figure it out. Many sites are designed with stretchy columns that work with either full zoom or text-only zoom, but definitely not all of them.

  • Selection tools not working properly -- Illustrator CS6

    The two selection tools in CS6 Illustrotor not working properly.  They don't select the object when I click and drag a box around them and the handles on drawing path won't stay highlighted when I use the direct selection tool so I can adjust them -- Worked in Illustrator for about 12 years and never had this problem.

    Have you tried:
    View > Show edges

  • Time Machine does not work properly?

    I have used Time Machine to back up my iMac computer to a LaCie external hard drive for over two years without any problems. The last few days I have noticed that when I mount the external hard drive on the desktop, Time Machine starts to backup my computer as usual, but continues to backup the computer and does not shut off.  Usually it takes Time Machine less than a minute to backup the computer and than shut off.  Now the Time Machine icon in the program bar continues to rotate and does not stop until I turn off the external hard drive.  Something is not working properly.  Has anyone had a similar problem or know how to get Time Machine to work properly.  Need help!!
    I should also mention that my hard drive is connected to my computer via a Bilkin power hub.  I recently had a problem with my hard drive dismounting from my desktop when I would wake up the computer from the sleep mode.  I thought that I had solved this problem by unplugging the drive's USB power cord from the power hub and inserting it into a different port.  It seem to work fine for a few days and than this new problem popped up.  Any assistance will help me sleep at night.

    I have used Time Machine to back up my iMac computer to a LaCie external hard drive for over two years without any problems. The last few days I have noticed that when I mount the external hard drive on the desktop, Time Machine starts to backup my computer as usual, but continues to backup the computer and does not shut off.  Usually it takes Time Machine less than a minute to backup the computer and than shut off.  Now the Time Machine icon in the program bar continues to rotate and does not stop until I turn off the external hard drive.  Something is not working properly.  Has anyone had a similar problem or know how to get Time Machine to work properly.  Need help!!
    I should also mention that my hard drive is connected to my computer via a Bilkin power hub.  I recently had a problem with my hard drive dismounting from my desktop when I would wake up the computer from the sleep mode.  I thought that I had solved this problem by unplugging the drive's USB power cord from the power hub and inserting it into a different port.  It seem to work fine for a few days and than this new problem popped up.  Any assistance will help me sleep at night.

  • Red Eye Removal not working properly

    I'm having a problem with the red eye tool. I've done a search of this problem which returned no results.
    I have three similar photographs, i.e, taken a few seconds a part at a wedding ceremony. I've corrected the red eye problem on the first file. However, the red eye "dots" REMAIN when I switch to the next files. If I select the red eye tool, I even get the location ovals overlaying the new picture.
    Bug?
    Eric

    > It only works on red eye, not bright eye, steel eye, green eye, or any other color.
    How about Evil Eye? 8-}
    Actually I've had the same problem with Red Eye Removal not working properly. Problem is intermittent and the eye was for sure red.

  • Curve 9300 3G - A few Keys not working properly

    Somebody close had gifted this Blackberry Curve 9300 3G mobile to me. After using it for just 2 months, the Space, alt and 0 keys are not working properly. At times I just have to keep pressing for these respective keys to respond and at times upon pressing, these keys respond more than once. Does anybody know how to tackle this issue.
    Regds
    AK

    Maybe your Keypad Membrane not working 

  • New PlayBook update 2.0.0.7971 not working properly

    The new update on blackberry PlayBook is not working properly.  The video store and podcasts are erroneously restricted to Puerto Rico, a US territory.  Please do something ASAP.

    Hi,
    This is defenitely strange - if you click on the "Login" link, you should be prompted for the plain vanilla SSO Username & Password. I have faced this problem infrequently only in Netscape 7.1.
    Did you try clearing the Browser Cache ? Which is the browser you are using ?
    Regards,
    Sandeep

Maybe you are looking for