The great CD drive mystery !!!
I recently decided to upgrade to a DVD writer ............ so I took out the old CD Rom drive and insert the new one (with all the correct settings etc). Started the PC up and everything was fine, games played, music played etc. Powered the PC down and on again a few times and each time it booted perfectly.
Went to install Nero 6, which came with the LG GSA4120B drive, and it crashed half way through, saying that it couldn't copy one of the files. So tried again and it crashed at exactly the same point. Thought it was a bit strange as things normally blow up when you go to run them and not just install them !!
So powered down and left it for the day.
The next day I booted up and everything seemed fine until I double clicked on the CD drive in My Computer ............... and the PC screen went black (as if on standby) ........... and the PC just died. Even the Reset button wouldn't work, I had to use the On/Off button at the back. Again and again it happened. Then it went to the next stage which was as soon as Windows started it did the same thing. I then took the drive out and put the old one back in and the same thing still happened.
The only way that I could get it to boot was to disconnect the CD drive altogether, and the PC runs fine. I've gone through Windows settings and motherboard BIOS settings and can't find anything which I would class as out of the ordinary.
So I thought I would install newer Geforce drivers to see what that would do and it still crashed if the CD drive was connected on the Secondary IDE as a Master. I thought I would try it as a Slave and the PC now boots but the weirdest thing happens ................. you can access the cd drives, play games fine, play music fine (using a CD that was in the PC when it booted) but if eject the CD tray, the PC crashes as before i.e. black screen ??!!!???
I'm at a loss .............. twenty years of PC'ing and for the life of me I can't work out the significance of the what happens when the tray opens for Windows to crash.
Please help someone ................. I been ready your forum for a few days and you guys seem to know your stuff.
PC mobo is MSI 6382e with AMD XP2000+ proc, graphics card MSI 8878 MX420.
If you search the MS knowledgebase I think you'll find how to restore the last good version of the Win98SE registry. Basically it goes like this:
1. Registry comprises 2 files which are something like system.dat & user.dat & you'll find them if you make Explorer display hidden & system files (in the root of C: I think but if not then search)
2. You should also find the same files with .bak extensions.
3. You need to reboot in DOS mode, rename the .dat files to e.g. .old, rename the .bak files to . dat & restart.
If you don't like what you get you can reverse the .old files back to .dat fiels and you are back to where you were.
All this may be too late if you have successfully booted with these problems because you will have overwritten the backups. I would suggest try a repair install of your OS, assuming you still have the CD.
Similar Messages
-
I have a huge mystery and I need help. Two hard drives hang in the balance! Have your attention? okay...here's the story (flash back)...
I have two internal hard drives put into two acomdata external hard drive shells. They've worked for two years. I moved into an apartment with carpet (potentially important info) and got set up. I'd been having power issues even at my old place. The power cord to the drives were not giving them enough juice to spin up. The drives would try, but couldn't. I ended up buying a new power cord on ebay. I got it in the mail and plugged it in. It worked! However, it seemed one of my shells was not starting up, not even lighting up. Whatever though, I let the one shell be my life boat to get the data off these drives.
Before I transfered the data, I opened the casing, but then closed it up again (realizing I should get the data off first before I swap the drives). When I tried transferring the data there was a privacy issue so i set the drive to "read & write". Shortly after, the drive dismounted and did not spin up.
I went and bought a new acomdata external shell thinking that was the cause. To my shock, it was not. The good (yet bad) news here is that both drives are not spinning up. That's potentially good as it could mean there's something beyond the drives that's wrong.
So, what I have in front of me are two functioning acomdata shells, two internal hard drives that aren't spinning up, and one acomdata shell that's simply not working all together. I have no idea what could be the problem yet have suspected static electricity, power supply, and (which is why I post here) Leopard software blockage.
What do you think my Sherlockian friend?Good point. It just doesn't feel right both drives dying at the same time. And obviously I don't want to come to that conclusion. Yet, I do have to rule that out at some point if no other possibility is working.
I haven't called Acomdata just yet, but I'm certain they won't give me many answers. -
The Great iMac FireWire Mystery
I'm stumped on this one and was wondering if anyone had any suggestions.
A couple of months ago I replaced my mother's mirror door G4 (2x1GHz) with a 20" 2.16GHz Intel iMac (the last of the all-white iMacs). Her G4 had an 80GB and a 60GB internal hard drives, with the 80GB being the boot drive and the 60GB being accessed exclusively by Retrospect to do incremental backups on a nightly basis and a recycle backup once a month. This system worked quite well for the past couple of years.
Her iMac has a 250GB internal drive. I added a Newer Tech miniStack v2 200GB hard drive which I have connected via FireWire. Using the same Retrospect-based system, backups are performed regularly. However, there's a fly in the ointment. Occasionally and for reasons unknown the computer will unmount the FireWire drive all by itself. This happens regardless of whether the computer is idle or in use. Power cycling the drive will remount it and all is well afterwards -- until the next time. It seems to happen about once every 2-3 days. The drive can be connected for 2-3 days at a time without any problems, but then it just disappears. Poof.
Things to remove from the list right off the bat...
1. The miniStack drive is fine, having performed its duties on several other computers in the past and operating flawlessly in the same capacity on other computers (including a MacBook Pro and an aluminum iMac).
2. OS X is set to sleep the drive when it's not in use. Since the incremental backup process takes less than five minutes a day to complete, having the drive spun up 24/7/365 makes little sense. The drive happily spins up when Retrospect does its thing (assuming the drive is still on the desktop at that time, of course) and the drive happily spins down shortly after Retrospect finishes (again, assuming...). A suggestion of "turn drive sleep off" is not acceptable for this reason, and for the fact that the other computers that the drive was attached to also had drive sleep enabled and didn't have this problem.
3. The OS X installation (10.4.10) is very clean, having been installed when the iMac was installed. There are no "haxies" or anything weird like that installed. The only "modification" to the system is enabling the DEBUG menu in Safari. When I put the iMac into target disk mode and boot my wife's MacBook Pro from the iMac's hard drive, the miniStack drive does not show this problem. If the OS X installation was to blame then the MacBook Pro should also have lost the drive.
4. I've also gone the other way, booting the iMac from the MacBook Pro's OS (10.4.8 and 10.4.10) in target disk mode. The problem remains on the iMac.
5. The iMac itself has been checked out by Tekserve and the Apple Store, both in Manhattan, and has been pronounced 100% without error or problem. The iMac also passes the hardware test provided on the Apple CD and the TechTool Pro diagnostic. All other aspects of the computer perform flawlessly.
6. The FireWire cable has been replaced, and both the old and new cables are perfectly functional with all other drives and computers tested.
7. With one exception, other FireWire devices on the iMac seem to work flawlessly in all other regards. I've tried two camcorders, an iSight webcam, a friend's FireWire-to-MIDI box, a DVD burner, and a FireWire CF card adapter. All perform perfectly. The one exception is a 60GB portable FireWire hard drive. This drive performs exactly the same way on the iMac; that is; you can connect it and use it without a problem, but if you keep it connected for 2-3 days it too disappears from the desktop just like the miniStack drive. (I had a 2GB CF card connected to a FireWire CD card adapter, and it was mounted on the desktop as a formatted Mac volume. This card stayed on the desktop for five days without a problem, so the problem seems to be localized to actual hard drives and not just mass storage devices.)
8. The iMac performs perfectly in target disk mode. I had it in TDM connected to the MacBook Pro for several days and it never disappeared.
So, I'm at a loss. My current "fix" is to connect the drive to the iMac via USB and that seems to be working. That seems to indicate that it's a FireWire problem but I've never heard of one so specific to one particular category of hardware before (e.g., hard drives). Regardless, that doesn't solve this mystery. Yes, the drive works under USB....but why not FireWire like it should?I have been having similar problems with a Mybook FW HD disappearing and remounting at random intervls. I am in the process of replacing it with a Fantom 1000.( I have a 300G Fantom with an Oxford chipsest that has been completley reliable for > 2yrs attached via FW400).
The Fantom 1000 mounted immediately with FW800, but as it was Fat32 formatted I decided to erase and reformat with MacOS extended using disk utility. I haven't been able to mount the final product, although it is recognized and described by the System. Disk utility can't verify or repair due to a formatting error.. I should mention that disk utility never gave any indication that it had finished the formating.. the blue barber pole was still spinning after 12 hrs
How long should it take to format a 1T disk?
Anyway now I am trying using a FW400 port and am about 1 hr into it...... next I will try USB and if that fails I will try to return to FAT 32... I should have quit while I was ahead
My question .... is this a FW problem, a Fantom problem or a formatting (Disk utility probem) -
I am trying to create a GUI Builder using Java. I have searched high and low, low and high, and I have not been able to figure out how to set the design time behaviour of a JavaBean (or any component for that matter). Theoretically (according to the JavaBeans API) this is done using the setDesignTime() method, but how can I apply this to a javax.swing.JButton, for example?
The BDK, and Bean Builder tools accomplish design time behaviour, but I am still unable to figure out how it is done (even after viewing the source code provided). (It appears as though those tools emulate design time behaviour.)
Can someone give me some help or direct me to a place where I can find the help that I need?Ok.....
Is there any way to make a swing component behave as if it is in design time mode?
If I am completely lost, please give me a hint as to where I can find the information that I need.
Please help! -
Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus -
I downloaded some videos to Premier Elements 13 from an external hard drive but now the external hard drive is damaged. While setting up my new MAC the external hard drive was dropped and I have been told by an outside source they could not retrieve the files. It had 4 years of photos and videos on it. I remembered that I had downloaded some of the videos from the external hard drive (before it was broke) to Adobe Organizer 13 when I installed the Adobe 13 on my MACOS X 10.9.5. I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open these videos?
Any input is greatly appreciated!! I am sick over losing the videos and had a little hope on Adobe Organizer until I was unable to open them. I am thinking it is due to my external hard drive not being plugged in. I thought when I transferred from the external hard drive to Adobe 13 that it would be there without the external hard drive needing to be attached but maybe I did something wrong.
Thanks again for any help!!!!jnrmendonca
It had 4 years of photos and videos on it.
To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
ATR -
I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah -
How do I copy the removed SSD drive from a water-damaged MB Pro to another Mac?
My son's MacBook Pro (early 2012) was ruined by a pint of water. The insurance company kept the laptop but returned its 256GB SSD drive. I've looked everywhere online – Apple's telephone support is as good as useless given they want a serial number and want to charge me £35 – for a caddy or SATA adaptor of some sort to copy files from the Sandisk SSD drive. I basically need something I can plug the SSD drive into that has a USB lead to plug it into another Mac so I can copy photos, word docs and MP3s. I can't believe it could be so difficult - it's just a hard drive, after all. Your help greatly appreciated.
Keetle wrote:
...I basically need something I can plug the SSD drive into that has a USB lead to plug it into another Mac so I can copy photos, word docs and MP3s. I can't believe it could be so difficult - it's just a hard drive, after all. Your help greatly appreciated.
This should do the trick, and will work with laptop and desktop drives too. And it doesn't rely on power from the USB port to make the drive work, which can sometimes be an issue. -
I had to replace the corrupted hard drive in my macbook pro recently, and after I did so I did a full factory software & application restore. I had to rebuild my iTunes Library by dragging my music folders in my iTunes Media into the iTunes Application and rebuild my playlists manually. After plugging my iPhone 5 into the computer USB, it immediately recognized my iPhone 5, showing: last backups, space left on my iPhone & all options available. I then checked the box to manually manage music etc. The problem I am now having is that when I actually try to drag music from my iTunes to my phone a prompt comes up saying that my iPhone is not an authorized device. What should I do? Any and all advice would be greatly appreciated!!
jrmetzger,
iOS runs on iPads and iPhones; OS X runs on Macs.
Given your situation, I’d highly recommended that you purchase a SATA-to-USB adapter, so that you can test both your old disk and your new disk externally, since it might be that the problem is due to a faulty internal SATA cable rather than due to faulty disks. -
I want to relocate my iTunes library on a NAS drive and stream to apple tv2 and DLNA tbs around the house is this possible and if so which is the best NAS drive to buy???
ged2001 wrote:
I want to relocate my iTunes library on a NAS drive and stream to apple tv2 and DLNA TV's around the house is this possible and if so which is the best NAS drive to buy???
i don't have any experience with DLNA TV's but i recently moved my iTunes library to a NAS. streaming content to airport express remote speakers and TV2 works great. however, i have all my gear hardwired to my time capsule (except the airport express) so i'm not sure how well streaming e.g. HD movies to TV over wifi works.
i have a Synology DiskStation 411j and am very happy with it. -
The old laptop died, and would not charge, beyond repair . Have removed the old hard drive from the PC and have connected it to my new PC. I have found the firefox folder but cannot see my bookmarks in it. How can i transfer my old bookmarks from the mozilla folder into the new version of firefox i have installed in my new PC??
See the great user tip: https://discussions.apple.com/docs/DOC-3141 for syncing to a new device.
-
I have a late 2005 power PC G5 that I want to bring back to life. I need to replace the original hard drive, a Maxtor 250 GB Sata. Can I replace it with modern drives, SATA 5-6 etc?
I knew I should never get rid of my old G5's. By the way, there is a browser still supported for the PPC, TenFourFox, if you're not using it already. Go to the Floodgap website (they author it) download it for free. The only thing it doesn't support is the Flash plugin, but the browser works great. Other video types are supported. It's based on Firefox, and runs most of the plugins and add-ons. It's very fast, and beats all other browsers on the browser compatibility and speed test. That's now my default on my G5's. Firefox and Safari are no longer supported. As far as the OS, both Tiger and Leopard were solid for me. The reason, as I stated before, was iMovie. The version in Tiger with iLife was far superior to what Apple changed it to. They 'dumbed it down' for the masses. Even the newest iLife 11 on my Mac Pro quad isn't is good, in my opinion. So Leopard should be fine for you. It's a much larger browser in terms of sheer megabytes and disk space, but it's fine. As far as getting an OS disc, I'm seeing Tiger for about $45.00, Leopard for $50 - 60.00 on that famous auction site. As far as RAM, I have 8GB in my G5 2.3, but you should check Activity Monitor when you are running your apps. See how much green slice you have left (unused RAM). You might find you don't need eight. A Mac Pro will grab more free RAM than a PPC machine will. I have a hard time maxing out use of my 8 on the PPC. Not true with the eight on my Mac Pro. The OS doesn't hesitate to grab and use it. You might be OK with 6GB on your PPC. More will not make you faster, as long as you still have free RAM available. As far as backup on your resurrected machine: look for a firewire enabled backup if can. Use CCC (Carbon Copy Cloner) and make a clone backup. Next time your PPC machine wipes out the hard drive, just take your Firewire drive and plug it into another PPC machine, and you can select it as your boot drive. You'll be back and running in five minutes. You can also take the physical drive out of your enclosure, and put it in your tower to replace the failed drive, and you'll be back to where you were in less than ten minutes, OS and all. The PowerMac has an 800 port, so you can do the 800 on the machine to an 800 port on your backup. A firewire 800 to 800 cable is only about $8.00. It runs nice and fast through the 800 port. I like the OWC Mercury Extreme enclosures. They use USB, Firewire 800, and eSATA, so all your options are open.
-
Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?
In other words, because the MacBook Air only has 120 gbs of hard drive space & my old hard drive, from a Lenovo, has 500 gbs of hard drive space (and I have over 120 gbs of music), I’m looking to manage my iTunes music from the external hard drive permanently. Upon attempting to access the iTunes library held on the external hard drive the following message comes up: “The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file”. Is there a way to get around this?
Any advice would be greatly appreciated, thanks so much!You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all. It also won't be easy when the time comes to relocate it all to different drives.
You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library. Next read about how to selectively consolidate items to the external drive.
Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
"...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links. If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences. Changing media folder preferences only applies to new files added, not old ones.
Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391 -
I have all of my imovie events stored on an external hard drive in order to save space on my MacBook Pro's internal drive. I currently back up both my MacBook Pro and the external hard drive using a second external hard drive via Time Machine. I have a few questions:
1. How can I be sure that the external drive is actually being backed up.
2. How do I retrieve the imovie events if the 1st external hard drive crashes?
Thank for your help!Let me give you some thoughts. I can tell you my plan, but ultimately you will need your own plan that makes sense for you.
I do not think that your idea of having two separate Time Machine destinations will work. You can have two external drives as Time Machine volumes, but they will both back up the same data set. You cannot dedicate one to iMovie and one to everything else. They will both have everything, so you may still have a space problem.
One way to overcome this is to back up the iMovie volume by using a tool like SuperDuper! or Carbon Copy Cloner. The good news is that your Event files should be pretty stable and there is no need to back them up every 15 minutes. So something like SuperDuper, which you can set to automatically backup once a day, for example, is probably fine. I am pretty sure that this would work if you kept the Projects on the same external drive. As long as Projects and Events are on the same drive, then the cloning stragy should work (but you should always test.)
Because projects change more often than events, and projects can become corrupted, I would definitely back up the Project Library to Time Machine. You can do this even though it is on an external drive. (And even though you may be periodically backing up the entire drive that contains the projects.)
Here are some thoughts on how I approach backup, copied from an earlier answer...
============================================================
Great question. I think the issue of backup is a important one, and one I always worry about since I have a lot of video footage that is irreplaceable.
For back-up, it is helpful to define the risk you are trying to protect from.
For example,
1) risk of corruption in iMovie --> I use Time Machine
2) risk of hard drive failure --> I use SuperDuper! nightly for bootable backup) and Time Machine all the time
3) Risk of theft or fire --> offsite backup
Here is what I do...
1) I back up my boot disk with SuperDuper automatically each night so I always have a bootable system.
2) I back up my original video files. For my Motion JPEG, VHS-->AIC, DV, and 8MM to DV, the EVENT is the copy I back up. (I keep the tapes, but I never want to have to import the tapes again.)
For my AVCHD high def video, I back up the camera archive of the AVCHD, but I am not currently backing up the Event files, because I would need from 4 to 8 TB to back up these events depending on whether I made one copy or two. I can always re-create the Event from the camera archive.
3) I use CrashPlan for my offsite backup. It costs less than $4 per month, and I seeded the initial backup to an external drive to minimize having to transfer video files over the Internet. I currently have over 2TB of data backed up to CrashPlan, which includes my entire boot drive, and the files described in #2.
4) All of the above is automated, so I don't have to think about it too much. If I have to manually do stuff, I tend to get behind.
You have to consider the value of total multiple redundancy vs. the likelihood that 2 or three unlikely events would all happen at once. For example, CrashPlan could lose my data. My hard disk could fail. I could lose everything in a fire. But it is unlikely that they would all happen at once, except in nuclear war, in which case, who cares? -
Is the win 8 driver for the printer photosmart D7360 rgb or CMYK?
Hi,
I will be using Lightroom 4.2 (under win 8 64) and will have the monitor and printer (HP Photosmart D7360) calibrated by a colormunki photo.
When the printer profile is generated by colormunki, depening on the actual printer driver, they will be either a RGB or CMYK profile. Apparently, LR 4.2 will only show printer profiles to use if the driver of the printer is RGB . So if it was CMYK, I wouldn't be able to use the profile for printing in LR.
Can anyone please tell me if this printer driver is RGB or CMYK?!
Any help will be greatly appreciated!
Regards,
This question was solved.
View Solution.The driver expects RGB data. The actual color inks in the printer use CMYK but that is handled by the driver, the applications need to send RGB data to the driver.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Maybe you are looking for
-
Unit does not show correctly(BI 7.0)
Hi, Gurus, I have key figures with unit 'EA', I checked in the cube and ODS, they are 'EA', but in analyzer, it shows '*****", this key figures are not aggregated, even I drag the '0UNIT' to the row, it still shows '*****'; and for the key figur
-
Server not running SSIS job in 32bit mode
I have a package that I developed in VS2012 (using the SQL Data Tools component) which collects data from a DBF file using the VFPOLEDB provider, and puts it into a database on a SQL Server 2012 X64 server. The project containing the package has the
-
Hi there, I have to upgrade from BOE 3.0 to 3.1 SP2. Do I have to upgrade to 3.1 w/o first, then upgrading to SP1 and afterwards to SP2 and then to FP2.2? And that level by level for Enterprise, client tools, Live Office, CR and XC? Or ist there a sh
-
How to get bulk action to update resource
I have to update some users data in a particular resource. I'm attempting to add a location to their user object, the resource and their waveset info via a bulk action script (which I have very little experience with). Currently I have it set up so t
-
Reformatting one partition in a 4-partition setup
hi, does anybody know if i can reformat only one of my 4 existing partions on an external drive without reformatting or erasing all the files in other partitions? they are all currently hfs+ and i need to turn one partition into fat32.