The Great Shift-Space bug in OBIEE (Second Post)

I have posted this before but no one was answered the following issue. Please respond.
Very interesting OBIEE (Oracle Business Intelligence Enterprise Edition) Bug. This might happen to you may be one out of 1,000,000.
Read full from http://musnet.blogspot.com/2010/05/great-shift-space-bug-in-obiee-very.html
Regards
Musnet

Hi Subhasish,
Thanks for the reply, glad that its something that is reproducible!
Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
VMs?
Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
Thanks again,
Tom

Similar Messages

The Great Shift-Space bug in OBIEE

Very interesting OBIEE (Oracle Business Intelligence Enterprise Edition) Bug. This might happen to you may be one out of 1,000,000.
Read full from http://musnet.blogspot.com/2010/05/great-shift-space-bug-in-obiee-very.html
Regards
Musnet

Paul wrote:
It sounds like a bug I've come across before. Check article 1054338.1 from support.oracle.com. It contains the reason for this error and details of a workaround. You will need to upgrade OC4J to 10.1.3.5.
Paul
http://total-bi.com
Thanks

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Updated to iOS7 on my iPad mini and now anything i type there is a 30 second lag on the letter appearing? Bug already? or does it need a full reset?

Updated to iOS7 on my iPad mini and now anything i type there is a 30 second lag on the letter appearing? Bug already? or does it need a full reset?

I have read that if you go to Settings, iCloud, and turn off documents and data that this will help with typing.

I need to erase free space on my hard drive. But when I am in disk utility the format and name are pale as is the erase free space button so I cannot erase free space.

My start up disk is full. I have been through my computer and erased a lot of music and video to free some space. I then went to disk utility to erase free space and find that the erase free space button is pale and therefore won't work. Nor can I select or deselect MacOS extended journaled.
Advice please?!

Recovering Disk Space
If you have less than 20% disk space then it is time to roll up your sleeves and search for what you can delete and what you can offload to another disk.
If you have less than 10 GB you definitely need to delete or offload some files or purchase a lager disk or SSD (see below). You may want to maintain at least 20 GB of free space so when your disk starts filling again it will have some room before it hits that 10 GB mark again. More headroom is better. If you let the space fall much below 9 GB you might not be able to boot your machine.
Initial easy steps to gain disk space:
- Delete all files in the Downloads folder.
Empty the Trash.
- Start iPhoto.
Empty its trash.
Restart.
- Restart in Safe Mode:
Restart the computer.
As soon as you hear the chime press and hold the right shift key.
Be patient. Hold it down until you see the Apple icon.
Empty the trash.
Restart in normal mode.
- Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the drop down menu.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
- Empty the Trash.
- Restart.
- Re-index your system disk (Macintosh HD):
http://support.apple.com/kb/ht2409
Time Machine Snapshots:
If your disk is 80% full that is normal. Time Machine uses up to 80% of the disk space for local snapshots. To get rid of these snapshots simply plug in your Time Machine backup drive and run a backup. See About Time Machine's 'local snapshots' on Mac notebooks: http://support.apple.com/kb/HT4878 and What are Local Snapshots? http://pondini.org/TM/30.html .
If you are concerned that the “Other” category of disk usage is taking too much space and for information on deleting files then look here: https://discussions.apple.com/docs/DOC-5142
Backup:
Run a Time Machine (or other) backup since you are about to delete and move files and you may need to recover from any inadvertent mistakes or decisions. You will need one external hard drive for your Time Machine (or other) backup and a second if you plan to offload some files. (See suggestions for where to purchase hard drives at the end of this message.)
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
Deleting files:
Then use the free application OmniDiskSweeper http://www.omnigroup.com/more to explore your volume in descending order by size so you can attack the problem from the top down, deleting the largest unwanted files first. Delete with caution and do not delete any system files. Remember to empty the trash after trashing the files.
Additional reference on freeing disk space:
http://pondini.org/OSX/DiskSpace.html
Offloading files:
Consider moving some of the no-often-used large files or directories to an external disk. Use ODS again to find them. As noted above this will be at least your second hard drive. Your first one(s) is/are for your Time Machine (or other) backup(s). Do not offload files onto a Time Machine disk.
Format the second drive as Mac OS Extended (journaled). Using OWS to find large files/folders and copy them from the system drive to the external hard drive and delete them from your internal drive.
Then  > System Preferences > Time Machine > Options… > Remove the offload HD name from the exclusions list.
Now both your system disk and your external offload disk will be backed up onto your Time Machine disk.
From: http://www.thexlab.com/faqs/freeingspace.html
To move your iTunes Music folder to another disk or partition:
To change the location of your iTunes Music folder, carefully follow the instructions in the AppleCare® Knowledge Base document "iTunes for Mac: Moving your iTunes Music folder."Additional information can be found in iTunes Help.
http://webcache.googleusercontent.com/search?q=cache:http://www.thexlab.com/105/ 00000849.html
Laptop users may want to consider having two iTunes libraries: a small library of current favorites on their computer, while their complete library resides on an external hard drive. Utilities like iTunes Library Manager enable you to easily have multiple iTunes libraries you can use with your account. https://www.macupdate.com/app/mac/7689/itunes-library-manager
To move your iPhoto Library folder to another disk or partition:
To move the iPhoto Library folder to a new location, employ the instructions in the AppleCare Knowledge Base document from http://support.apple.com/kb/PH2506 corresponding to the version of iPhoto you are using. Additional information can be found in iPhoto Help.
Laptop users may want to consider having two iPhoto libraries: a small library of current, favorite photographs on their computer, while their complete library, or archives of older photos are saved on an external hard drive. Utilities such as iPhoto Buddy and iPhoto Library Manager enable you to have multiple iPhoto libraries that you can use with your account.
https://www.macupdate.com/app/mac/12175/iphoto-buddy
https://www.macupdate.com/app/mac/7158/iphoto-library-manager
Hardware — Bigger disk/SSD:
If your system has upgradeable storage then if you are still tight on disk space consider larger storage. If you have a disk consider replacing it with a one TB disk. Check out a one terabyte HGST 7K1000 7200 rpm, SATA III drive from OWC http://eshop.macsales.com ($100). If you have an SSD consider increasing its capacity to 240 or 480 GB. A standard 240 GB SSD would cost from $200 to $280. See OWC and Crucial: http://www.crucial.com/ for options. OWC sells 120, 240 and 480 GB SSD upgrades for MacBook Airs. A 240 GB upgrade costs $265.   http://eshop.macsales.com/shop/SSD/OWC/ . If your Mac is under warranty or AppleCare replacing the SSD will void the warranty.
PlotinusVeritas gives some great suggestions for purchasing external hard drives in this thread:
https://discussions.apple.com/thread/5602141?tstart=0

When I power up my mac, I see the white screen and the apple icon. After a few seconds of powering up the screen goes dark. Yet I still can the mouse arrow but nothing else.

When I power up my Imac, I see the white screen and the apple icon. After a few seconds the screen goes dark. I am able to still see the mouse arrow as I move it around. But nothing else. What is the problem and how do I recover?

Try this from another user:
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).

A workaround to get open documents in different Spaces to the allocated PS space

A small workaround for Spaces CS5 Mac.
If you have CS5 documents spread over different Spaces due to clicking them in the finder and want to get them all back in to the allocated PS Space, here's a workaround.
You do need one doc open in the correct space I'm afraid for it to work. Create a new doc in there if you have to. I tend to leave one small doc open in the right Space all the time now.
Go to the allocated PS space. Select the menu option "Consolidate all to tabs" from the Window>Arrange menu.
This will bring all the open docs from their spaces to the correct space as tabs.
That might be enough for you but you can't drag adjustments layers and layers with alphas etc to another doc in Tab view, something I do all the time when I'm retouching 20-30 shots and I'm trying to match them.
Hard to do that with tab view obviously.
Next select "Float all in windows" and you'll have your docs viewable, side by side in the right space.
If you assign a key command to those options, it becomes a quick tap 1-2 and you're done.
As far as I can tell, if you want floating windows, and all your docs in the right place, and don't want to open your images from the PS open dialogue (who does when you have 6 windows of 50 images on your dual 30" monitor setup?) then this will do it.
It's not great for all things but it's better than "It's all Apple's fault"

there is certainly no built in way to do it. In fact Dock Spaces is the only program I've ever heard of that allows you to have different docks in different spaces. if it can't do it, it's impossible.

How to measure the phase shift using AC analysis?

Hi,
I have a simple RLC circuit consisting of no more than 4 components. If i hook up the network analyser function to the circuit and read the S11 values, i can see a change in the input impedance and a phase shift when i run it across a range of frequencies.
I am trying to do the same with the AC analysis tool. I've placed a probe on the positive input line. Using the AC analysis i've obtained the input impedance by using the expression mag(V(Probe1))/mag(I(Probe1)). Everything looks fine but i just can't seem to obtain the correct expression to gain the phase shift. All of the values i get out seem to flat line.
It would be great help if someone could point me in the right direction, as i'm running out of ideas.
Thanks for the help.
Attachments:
M1.png ‏3155 KB
m2.png ‏618 KB

Hi 08Ultrasound,
You need to measure the voltage phase difference over a load as the voltage source is ideal so will always be in phase.
Regards,
Adam Brown
Applications Engineer
National Instruments UK

How to use the Columns Hidden | space in the bottom of af:panelCollection?

Hi,experts,
In jdev 11.1.2.3,
I can see a row of Columns Hidden | Columns Frozen in the bottom of component af:panelCollection - pc1 which have an af:table - t1 component inside in designer view,
and can see there is a blank row space only with "|" inside when the page is running.
Now I want to use this blank row space such as to display row numbers for the table, so I set the property for the panelColletion as following source code:
==========================
<af:panelCollection id="pc1" inlineStyle="width:1250px; height:500px;">
<f:facet name="menus"/>
<f:facet name="toolbar"/>
<f:facet name="statusbar">
<af:group id="g4"/>
</f:facet>
<af:table value="#{bindings.TView1.collectionModel}" var="row"
rows="#{bindings.TView1.rangeSize}"
emptyText="#{bindings.TView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.TView1.rangeSize}" rowBandingInterval="1"
filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}" filterVisible="false"
varStatus="vs"
selectedRowKeys="#{bindings.TView1.collectionModel.selectedRow}"
selectionListener="#{bindings.TView1.collectionModel.makeCurrent}"
rowSelection="single" id="t1" inlineStyle="font-size:xx-large; font-weight:bolder;">
<af:column sortProperty="#{bindings.TView1.hints.GoodsStatus3.name}" filterable="true"
sortable="true"
headerText="#{bindings.TView1.hints.GoodsStatus3.label}"
id="c42">
<af:outputText value="#{row.GoodsStatus3}" id="ot33"/>
</af:column>
<f:facet name="footer">
<af:group id="g3">
*<af:outputText value="RowsNumber：" id="ot44"/>*
*<af:outputText value="#{bindings.TView1Iterator.estimatedRowCount}"*
id="ot43" partialTriggers="::pc1:t1"/>
</af:group>
</f:facet><f:facet name="detailStamp"/>
</af:table>
</af:panelCollection>
=====================
but when run the page there is no display for the row number, instead on the bottom of the table, there is only a blank row with "|" inside.
How to use the Columns Hidden | Columns Frozen space in the bottom of component af:panelCollection ?
Thanks!

Hi, Arun
It works.
As in my use case, can draw an af:toolbar component into statusbar of Panel Collection facets in Structure view.
There is still a small issue:
cannot see the Columns Hidden|Columns Frozen component in the Structure view,
and if drop more than one af:toolbar into statusbar, the sencond one will fall/wrap into second row, even though there is enough space on the first row (to occupy a second row in statusbar will be a waste of space), and cannot see how to adjust.
Thank you very much!
bao

How can I find out the percentage of space taken up by a vector in a document?

Hi all,
I've been doing visual research over the last couple of years, and part of this has resulted in hundreds of in-design documents with vectors of varying sizes in each. Essentially, I'm hoping to find a quick way to find out the percentage of space occupied by these vectors. I can't figure out how to go in to each document and find the info on the selected vector. I know that Photoshop has options to see pixels when using selection tools, but I've found this both cumbersome and inaccurate.
Any ideas would be greatly appreciated!
Cheers,
Kevin

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

Query to find out the free disk space on C: drive

Hi Guys,
I am trying to create a query in Queries section under Monitoring, To find out the free disk space of C: drive.
Am using the below query, but it shows lot many fields, I need only Machine names of the collection and their
Free Disk Space on C: drive
select * from SMS_R_System inner join SMS_G_System_LOGICAL_DISK on SMS_G_System_LOGICAL_DISK.ResourceId = SMS_R_System.ResourceId where SMS_G_System_LOGICAL_DISK.DeviceID = "C:" and SMS_G_System_LOGICAL_DISK.FreeSpace > 1024
Please assist

The SELECT part of the query will govern what fields you are shown, so perhaps try:
Select SMS_R_System.ResourceID, SMS_R_System.NETBIOSname, SMS_G_System_Logical_Disk.FreeSpace
from SMS_R_System
inner join SMS_G_System_LOGICAL_DISK on SMS_G_System_LOGICAL_DISK.ResourceId = SMS_R_System.ResourceId
where SMS_G_System_LOGICAL_DISK.DeviceID = "C:" and SMS_G_System_LOGICAL_DISK.FreeSpace > 1024
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer.

The icon of faceTime doesn't appear in the dock just space for it

The icon of faceTime doesn't appear in the dock just space for it and i can turn on the faceTime when I click to the space

If the above doesn't work, try a reset.
1. Hold the Sleep and Home button down (together)
2. For about 10 seconds
3. Until you see the Apple logo (very important)
4. Ignore the red slider

Problem with the right Shift Button

Good Morning
i have a problem with my keyboard (Mac Book Pro). when i push the right shift Button, the windows on the screen spring to the side and i see the desktop. when i release the button, the windows return to the old place.
Can someone help me?
Thanks and sorry about my english
Dominic

System Preferences - Exposé & Spaces - Exposé - Show Desktop : change it to something else.

How do I get the images/business card to complete the 10 card spaces

I complete making my business card on the first space/template but it does not complete filling the new card info. How do I complete the page of business cards?

Hi hd,
EDIT: OOPS! The instructions below assumed you were using the Business Card Template in Pages '09. Seing as you've posted this question in the AppleWorks discussion area, it's more likely that you are using the Database module in AppleWorks. Instructions for that application are in my second post below.
B
Read all steps below before starting, then go through the steps in sequence.
Select all of the elements of the one you have created. Go Arrange > Group.
Copy.
Press command-A to select all.
Command-click on the completed card to deselect it.
With everything except the original card selected, press delete to clear the form.
Paste (to paste the copy you have made of the original card).
(If you did not copy the original:
(Select the original. Press command-D to duplicate it.)
Use the mouse and the alignment guides to position the duplicate in the top right space on the template. (This assumes the original is in the top left space.)
Move the mouse pointer to the original, then command-click to add it to the selection.
Go Arrange > Group
Press command-D four times to create four more pairs of cards.
Use the mouse to drag the last-created pair to the bottom row of the template, and left to align with the top pair (indicated by the appearance of alignment guides).
Go Arrange > Align > Left
Go Arrange > Distribute Objects > Vertical.
Each card should now be in the center of its space. If not, select each individually and perform minor adjestments using the mouse and/or the arrow keys.
NOTE: Depending on the template, you may see a set of small x s when you Select All. These are the handles of a large, locked object. Command-click on the object to remove it from the selection before attempting the last two steps in the list.
Regards,
Barry

How exactly does the logical shift function work?

I think I am missing something very basic here - I am trying to left shift an 8 bit unsigned integer by one place (x<<1)in each iteration of a while loop. So if I start with a number, say 18, the first iteration I get 36, then 72, 144 and after this 32, 64 and so on. I'm not able to do this apparently simple operation in LabVIEW. I tried the logical shift function and a formula node, but both dont give me what I need. The formula node appears to be close in that it gives me 18,36,72,144 but after that I get 255 rather than 32. I dont understand what the logical shift function is doing here. I have attached a vi here that shows what I am trying to do. Any help explaining the mistake I am making will be greatly apprec
iated.
Thanks.
Attachments:
Logical_Shift.vi ‏17 KB

You have the inputs confused. If you want to left-shift by 1 at each iteration, the "1" goes on the upper "y" terminal and the number from the shift register (the "shiftee") goes at the bottom. (see attached modification).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Logical_Shift_2.vi ‏27 KB

The Great Shift-Space bug in OBIEE (Second Post)

Similar Messages

Maybe you are looking for