The great TC isn't friendly in a home network behind a other router.

Hi everybody,
I bought the TC 500Gb in april with my new MAc Quad core.
After unpacking and read some manuals I set it up in the way below.
I have a Orange livebox router (only two ethernet ports) so normally I connect another Netgear 824 router on it. That's working perfect (not the wireless range that's why I bought the TC). Near my devices I have asus gigabyte switches and working great. I connected my TC on a Asus gigabyte switch and the use of the assistent went allright.
The TC must reboot after the settings and then the problems are comming.
The TC reboots and the led indicator Is green.
I try to go into the configuration again but I can't go in. Time outs after and after again.
I have reset the TC soft and hard then you can acces the TC sometimes.
I contacted Apple Support and they helped a bit by hard resetting and connecting the TC straight on my Mac Pro.
I allready knew that this is working so okay.
With a bit research I found some default values in the TC.
He is a router with a starting adres 10.0.1.1 ( I found this out with my airport connection of my Mac Pro).
The problems are allways there it seems when I change my adress range to 192.168.1.x. then I can't connect him with ethernet. All of my ethernet devices are working good only the TC has problems.
The wireless setup is good even after reboots and can connect with my Macbook Pro/iphone/Mac Pro.
And using the Timemmachine is not allways to use. The storage device is once and a while gone.
I found a workaround without time outs.
In the Airport configuration menu there is menu item of configuring another base device, after putting in the 192.168.1.TC adres it's alllways good and I come in.
So very strange.
I think when you are using routers before the TC it's a crime using the TC.
Maybe changes the ipadress range to 10.0.1.x then maybe it's good.
Who has the same problems like I have?
Configuration problems, timeouts lost connections?
Message was edited by: Flying Dutchy

Similar Messages

How to I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP or Navigator.

How do I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP Navigator.

Did you try scanning using Image Capture?
Otherwise, check the Canon website for updated software.

When connecting to the mobile hotspot with wifi, should I click home network or public network?

Would it be safe to connect to the iphone as a home network considering it is mobile internet?

If it works at home there is a problem with your office network. Perhaps out-of-date firmware in the router, or possibly your company's wireless network is set to allow connections on from known computers (MAC filtering). I realize you may not have much control over this; ask your IT group.
Launch Settings/WiFi and connect to your office network, then tap the right arrow next to the network name and check the IP address and DNS address. Compare the IP address to the one on your computer; the first 3 triads should be the same. If they are not the wireless router is not assigning an IP address. Also compare the DNS addresses. If they match your computer's try deleting the first one, or replace all of them with a public DNS server such as OpenDNS (208.67.222.222).

Hi - my mac mini drops the internet after 30 seconds. If i reset in the diagnosics it works again but then drops it just the same. Its connected to my home network. All other apple devices are fine?

I have a home network which services:
Apple TV
Air port express
Mac book pro
I phone
All the above wrok perfectly.
I have a mac Mini which will join the network and operates fine but keeps dropping the internet after 30 secods of connection?
If I reset everything in the diagnostics box it will rejoin the network but then drops it again !!!
any ideas?
Chris

Hi Chris, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

The green light isn't coming on on my airport extreme

I purchased the AirPort Extreme Base station as a recent lightening storm fried my other router. I have followed the directions for the base station and have even been able to hook up to the internet; however, the amber light on the station is still flashing amber. Help.

The flashing amber can be due to many many reasons.. open airport utility on a Mac (10.7 or later) or iOS device v6 or later and tell us what the errors are.. it will be listed in the summary page when you click the red circle with the number of errors.
Windows version utility is useless now on new AC products. Apple have not released a v6 utility required for windows.

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

HP Protect tool password manager not working with the new version of Mozilla: I got this alert: "Firefox doesn't know how to open this address, because the protocol (dpql) isn't associated with any program." please help

I have an HP ProBook 4520s. I have been using HP Protect tool's Password manager to store and manage my passords for all Login websites in Firefox 3.6. As a result, I just swiped my fingerprint to log on to any website.
After I installed the version 4 of Firefox, my all my login details do not work anymore. I have tried to reset them but I repeatedly get this error: "Firefox doesn't know how to open this address, because the protocol (dpql) isn't associated with any program."
something like this would have been passed onto the address: "dpql://c:\program%20files%20(x86)\hewlett-packard\hp%20protecttools%20security%20manager\bin\dpminionlineids.dll/qlinkload.htm#id=2".
Although the password manager works with Internet Explorer 9, I need it to work with Firefox 4 as this is my preferred browser.
Please help. Thank you!

I guess this means that IE is more user friendly for HP Password Manager finger swipe recall of passwords, a favorite of mine. I still don't see a post from Firefox as to why they haven't produced fix. So I'll switch to IE until things change. I don't see value in downgrading to a Firefox version that's no longer going to be supported.

Sendgrid addon "The management portal for the add-on isn't available right now. Please try again later"

After adding the Sendgrid Addon, when we go to the "Go to the SendGrid web site for the next steps" link, we get the following error message: "The management portal for the add-on isn't available right now. Please try again later."
Best regards,
Joe Boren

Hi,
If you have successfully purcasedAdd-on SendGrid, but it is not available, I suggest you contact with support, it's the best choice for you.Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/ Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a
support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.

how do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.
all i have is the internal mic option, can anyone help?
thanks

You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

I am getting this error message when trying to get to a college webpage Firefox doesn't know how to open this address, because the protocol (html) isn't associated with any program.

I am trying to get to a college webpage for information and get this error message from firefox Firefox doesn't know how to open this address, because the protocol (html) isn't associated with any program.
== This happened ==
Every time Firefox opened
== whe trying to access webpage

Is this coming from a link, or from something you are trying to type in the address bar?
Try replacing the "html" at the start with "http",
so if you have html://somesite.edu,
change it to http://somesite.edu.

When I try to open a video from the website Youtube I got this message that I didnt before I uograde to Firefox 7.0.1 : "Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."

When I try to open a video from the website Youtube I got this message that I didnt before I uograde to Firefox 7.0.1 : "Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."
That didnt happen before until I made an upgrade to 7.0.1

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

How can I add/change art work to albums where the art work isn't available at iTunes?

How can I add/change art work to albums where the art work isn't available at iTunes?

Go to google and search for the artwork. When you find it, save it to your computer. Right click the album and select get info. Drag the image you saved to the empty box for album art.

Can I get the Dust Jacket and the Great Cover Look of iPhoto in Aperture?

Hello,
I am a huge fan of iPhoto (and most of the other Apple products.) I am using Aperture 2 and I recently created and ordered a book using it. I was blown away by the page layout options, however, I was greatly disappointed when I received my book and way the cover! It looked like someone just used some sort of "sticky" as the label/cover. It is already starting to peel off! Our client wasn't very happy with it at all.
Can someone tell my how I can get the great features and flexibility of the pages that are offered in Aperture along with the great cover and dust jacked of iPhoto? That would really be great!!
Thanks in advance for your help!

One option could be to save the Aperture book layouts as JPEGs and then add them to an iPhoto book as full-bleed images. Then order the book via iPhoto.

How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used.

How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used. Here's the message It gives a number of options to choose from if I want to dispute the claim but I don't know which one this would come under. Several obviously don't apply and of the ones left I don't know which content that is in IMovie that I use comes under. "This video is my original content and I own the rights to it" "I have a license or written permission of the property rights holder to use this material" "My use of the content meets the legal requirements for fair use of fair dealing under applicable copyright laws" or "The content is in the public domain or is not eligible for copright protection."

You want to use the "I have a license..." option, since clearly the music is not yours, but Apple has granted you a license.
For your license, see this document, section 2.M. http://images.apple.com/legal/sla/docs/iMovie.pdf
For more on this irritating problem and why it is so hard to solve, see this article. (It is a problem for Final Cut Pro users as well.)
http://www.larryjordan.biz/app_bin/wordpress/archives/1842

Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

I am trying to burn a dvd in premiere elements 8.0 but after 96% iam getting this error :
"device error-the target device isn't suitable for use."
I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
System configration :
win vista 32 bit .
Processor :Amd athlon 64 dual core 2.60 ghz .
Ram :3 gb
Graphic card :nvidia geforce 6150 se .
Camcoder model number :JVC gz-hm320.
Format :.mts
Frame size :1920/1080
Frame rate :29.97.
Please look into this problem .
Regards
Manoj Khati

This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116

The great TC isn't friendly in a home network behind a other router.

Similar Messages

Maybe you are looking for