The Grid control installer has inside an Oracle Server ?

Hi
The Grid control installer has inside an Oracle Server to create the Repository Database or I have to install and Oracle Server before ?
Thanks

I have installed both Grid Control and with GC 11g and WebLogic Server and I don't recall creating the respository before the install.
You will have to choose which install you are going to use. Grid Control 11g requires WebLogic Server install.
Grid Control 11g >>> http://download.oracle.com/docs/cd/E11857_01/index.htm
Grid Control 10g >>> http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm
KDSDBA
OCP

Similar Messages

OEM grid control installation

hi
i am trying to install the OEM grid control on my machine configured with statis IP address
After installation when configuration assistants start to configure. i face the following error continuously.
java security configuration assistan fails with the following errors
jaznca.log at "E:\oracle\product\10.1.0\em\cfgtoollogs" contains the following
Oracle JAAS [Fri Mar 10 18:01:55 GMT+05:00 2006]: exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.security.jazn.util.JAZNInstallHelper.resync(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.setCredentials(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.main(Unknown Source)
Caused by: oracle.ias.sysmgmt.exception.TaskException: TaskMaster initialization failed.
Root Cause: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
Resolution: check the system configuration and make sure that the client can access the repository database.
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
at oracle.security.jazn.smi.DcmUtil.resyncInstance(Unknown Source)
... 7 more
I started the OPMN manually and clicked on RETRY to configure this assistant. again failed and now
jaznca.log contains the following
Oracle JAAS [Fri Mar 10 18:06:50 GMT+05:00 2006]: exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.security.jazn.util.JAZNInstallHelper.resync(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.setCredentials(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.main(Unknown Source)
Caused by: java.lang.Exception: At instance:EnterpriseManager0.lhrpc419.lhr.systemsltd.com Error:See base exception for details.
Base Exception:
oracle.ias.sysmgmt.exception.TaskException:OPMN process startup has timed out.
Resolution: Try starting the OPMN process using the command line utility "$ORACLE_HOME/OPMN/bin/OPMNctl start". If the OPMN process does not start check the log files in $ORACLE_HOME/OPMN/logs for more information.See base exception for details.
at oracle.security.jazn.smi.DcmUtil.resyncInstance(Unknown Source)
... 7 more
ons.log at "E:\oracle\product\10.1.0\em\opmn\logs" contains following
06/03/10 18:05:32 [4] ONS server initiated
06/03/10 18:05:47 [4] Logging disabled
06/03/10 18:05:49 [4] ONS server initiated
06/03/10 18:05:49 [2] BIND (No error)
06/03/10 18:05:49 [2] 0.0.24.56:6200 - listener BIND failed
06/03/10 18:05:49 [4] Listener thread 860: 192.168.0.70:6200 (0x401) terminating
06/03/10 18:05:49 [2] BIND (No error)
06/03/10 18:05:49 [1] Local listener terminated
can you guide that how to catter with this?
regards

Are you doing the Grid Control installation into a new Oracle Home? I would try a fresh installation...Typically, the installation itself is fairly straightforward..

10g Grid Control Installation/configuration on RAC

Hi Experts,
I am new to RAC and I need your help.
I need to configure 2 node RAC and install/configure Oracle 10g Grid control (High Availability) on HP-UX Itanium servers. Is there any good document or link?
Thank You all in advance
Bell

Hi Bell,
Here is the link for the 10gR5 Grid Control Installation Guide: http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm
Considering the GC repository is a RAC database you will be performing the "+Using an Existing Database+" installation type.
I would highlight the below part of the documentation:
To view a list of certified Oracle Database, see Document ID 412431.1 on My Oracle Support (formerly Metalink).
If you want to use a RAC database, which is configured on a virtual host, as the existing database, then refer to Document ID 561441.1 on My Oracle Support (formerly Metalink).
HTH,
Regards,
Jozsef
Edited by: Jozsef on Oct 22, 2010 12:14 AM

Configuration Assistant failed during OEM 10g Grid control installation

Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

10g R2 Grid Control Installation

Hi,
I want to go for 10g R2 Grid Control Installation...
I have setup like this
Software:
Oracle 10g R2 Grid Controller
Oracle 10g R3 patchset
Hardware:
Small PC with 2 GB RAM and 80 GB HDD
Target Nodes:
Oracle Applications Database Tier Node with 10g Database
Oracle Applications Tier Node
Oracle 9i Database standaalone
==========================
I want to install the 10gR2 Grid control on the SMALL PC on Linux...
I will Apply the Patchset 10g R3 on top it...
Then I want to install the OEM Grid Control Agent in Target Nodes...Where can I get this software...Please sched some light on this

Hi,
Cannot we install 10gR2 Grid Control on Existing
Target Database Server in a seperate Oracle Home with
a seperate user for installation..It is adviceable to use the same oracle user in a different Oracle Home.

10g Grid Control Installation/Configuration

I want to install and configure the 10g grid control agent in our environment.
Is there any step by step document for installation and configuration.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

Hiding a column Attribute in the Grid Control in a DAC form.

Hi,
My RowsetInfo has a Image AttributeInfo and other kinds of AttributeInfo.I wanted to display the image in a seperate area in the form.The remaining Attributes would come in form as a detail grid.
However, since I bind the Grid control to my rowsetInfo, and also since my rowsetinfo has an image AttributeInfo, I see an Image column there(which ofcourse contains references to these Image objects!!).
I would want to hide this column in the grid.How do I go about it?Do I need to create a seperate rowsetinfo for the Image controlor there is a workaround for this?
Any ideas??
--Sandeep

Hi,
Going through the previous discussions in this forum, I had also tried the following :
JTable table = detailGrid.getTable();
TableColumnModel tableColumnModel =
table.getColumnModel();
table.removeColumn(tableColumnModel.
getColumn(1));
This doesnot seem to work.I get the following exception:
java.lang.ArrayIndexOutOfBoundsException: 1 >= 0
java.lang.Object java.util.Vector.elementAt(int)
javax.swing.table.TableColumn
javax.swing.table.DefaultTableColumnModel.getColumn(int)
void DAC2Package.DAC2Frame.jbInit()
void DAC2Package.DAC2Frame.<init>()
void DAC2Package.DAC2Application.<init>()
void DAC2Package.DAC2Application.main(java.lang.String[])
Since I have quite a few number of columns in the GridControl, I shouldnot be getting this
exception in the first place.
Also, I donot understand why
tableColumnModel.getColumnCount() prints zero in the console.
Thanks in advance,
Sandeep
null

Upgrading Management Agents after upgrading the Grid Control to 10.2..0.5

Hello:
I am pretty new to implementing Grid control. I have been assigned the task of upgrading the Grid control to 10.2.0.5. I successfully upgraded the GC to 10.2.0.5. Now the next task is to upgrade the Agents running on other Database nodes. I have 6 databases running on Solaris 9.0 , few of them running on RHEL 5.0 x86, a few of them on RHEL 5.0 86*64. I am looking to upgrade these agents in one shot. Is there any way I can accomplish this from Grid control. If it is the case, then do I have to download and upload the patchsets for 10.2.0.5 for various platforms into the Grid Control.
I would be very happy if you could give me valid pointers which would help me to understand and move further.
Regards,
Bala

Yes you can upgrade the agent at one shot.Refer the following OBE
http://www.oracle.com/technology/obe/obe10gemgc_10204/agentpatch_upgrade.htm

Grid Control installation for 11G: is 10g grid required ?

Dear All,
We are currently using the local dbconsole for the monitoring and doing administrative work on our 11g database. My limited experience and observation indicates that 11G does not have its own enterprise Grid control yet and it requires the older 10G grid control ? So if we deploy (albeit successfully 10G grid control), does the enterprise manager control tabs will be very different than the current dbconsole in 11G ?
Thanks.

user6116850 wrote:
Dear All,
We are currently using the local dbconsole for the monitoring and doing administrative work on our 11g database. My limited experience and observation indicates that 11G does not have its own enterprise Grid control yet and it requires the older 10G grid control ? So if we deploy (albeit successfully 10G grid control), does the enterprise manager control tabs will be very different than the current dbconsole in 11G ?
Thanks.Upgrade Grid Control to 10.2.0.5. Grid Control is an independent product and will not follow the same numbering as Database and App Server/Fusion.
It will provide a lot of extra pages and tabs anyway. And it will format and present the information for Oracle 11g properly to work in it's pages.
Try it and see.
and ask Grid Control questions in the Grid Control forum for better Grid Control answers.

Error after ip address change of the grid control server

Hi All,
I got the error below, after i changed the ip address of the server. What would i do? Both db and the application are running on the same machine.
[oracle@YDFULGRID bin]$ ./emctl start oms
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server Could Not Be Started
Oracle Management Server is not functioning because of the following reason:
Connection to the repository failed. Verify that the repository connection information provided is correct.
Please check /oracle/gc_inst/em/EMGC_OMS1/sysman/log/emctl.log for error details
when i checked the error log:
2012-09-13 16:23:56,602 [main] DEBUG oms.StatusOMSCmd processStatusOMS.155 - Using http port.
2012-09-13 16:23:56,602 [main] DEBUG oms.StatusOMSCmd processStatusOMS.195 - Attempting to connect to http://YDFULGRID.YILDIZ.DOMAIN:7202/em/console/logon/logon
2012-09-13 16:24:17,638 [main] DEBUG oms.StatusOMSCmd processStatusOMS.200 - page status code is 503
2012-09-13 16:24:17,638 [main] DEBUG oms.StatusOMSCmd processStatusOMS.202 - header is 3
2012-09-13 16:24:17,639 [main] INFO wls.OMSController statusOMS.950 - statusOMS finished with result: 3
Edited by: user5199319 on 13.Eyl.2012 06:45

Nowadays it's fairly painless - most issues arise around the admin server. With 5.x Sun provides scripts to help with this (admin_ip.pl) in the shared directory ...
HTH

How can i confirm that i have the grid control ?

Hi,
I have oracle 10g database , we have dbconsole. But i don't know wherther we have the grid control or not ??? how can i check that ??
And one more thing , i have the oracle 817 databases , in need to register that database into the GRID . Can any one send me the proper doc. for 817 to install into grid control db.
$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://prodgv1:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in

I have oracle 10g database , we have dbconsole. But i
don't know wherther we have the grid control or not
??? how can i check that ?? What are you looking for exactly? What does "do we have the grid control" mean?
Did you download and install this?
A "default" install comes with three Oracle homes, with directories db10g, oms10g and agent10g in the 'basedir'. Kinda hard to miss...
With proper environment setup, you could try
$ emctl status oms
To manage Targets (as called in EM terms), you would install a Management Agent on each host to start monitoring hosts, listeners, databases, application servers, oc4j instances, and other types of targets. You "add hosts" via addition of agents.
And one more thing , i have the oracle 817 databases
, in need to register that database into the GRID .
Can any one send me the proper doc. for 817 to
install into grid control db.No need to send anything, the documentation is available here on OTN (look in the top menu "shortcuts", Documentation -> Enterprise Manager).
There are several options (version dependent of course) available for deploying agents. But you need a OMS + Repository first.
Further discussion probably belongs in the dedicated Enterprise Manager.
Message was edited by:
orafad

Whats the functional difference between dbconole and using the Grid control.

I know this may seem like a strange question, but I was wondering if I only have one instance on my server, would benefit would i gain if I installed and configured the grid control
over the dbconsole that comes with the 11gr2?
I know the Grid control can discover many databases, but what else can it do that the dbconsole cannot?
thanks!

Hi,
Indeed good question.
It depends on installation type you selected. But are responsible for user administration in terms of creating, deleting, updating and role assignment tasks to users and groups.
--CUA is meant for ABAP Installation. CUA is responsible for entire landscape user administration works with RFC connection talking to all ABAP systems
--UME is meant for Java installations, plus UME is responsible for handling communication between ABAP users and java users.
UME
For more details see below links all advantages and disadvantages of both systems and comparisons deliberately.
http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/3e3842b23d690de10000000a155106/frameset.htm
Thanks,
Amit Lal
P.S Please don't forget to reward pts.

Access the gridview of the grid control

Hi all
It may seem a weird title, but this is exactly my problem.
I am using winforms with devexpress tool in my application. I want to access the selected row of a grid view from another form. so I used the following code:
foreach (XtraUserControl usrControl in splitContainerControl.Panel2.Controls)
                if (usrControl is MY_USER_CONTROL_NAME)
                    foreach (Control grid_control in usrControl.Controls)
                        if (grid_control is GridControl)
                            //up to this point i must be able to access the grid control, and after that access the grid
view by using
                            //the following statement as I found in other forum
                            GridView myView = grid_control.ViewCollection[0] as GridView;
the problem is I cannot get this ViewCollection[] property of the grid control
any help???

Hi khidir,
As far as I know, devexpress is not a Microsoft product, thus the issue of devexpress you could go to the official site of devexpress for professional support.
The link might be useful to you:
#How to get field value of selected Row Devexpress GridView?
http://stackoverflow.com/questions/19206186/how-to-get-field-value-of-selected-row-devexpress-gridview
The official site of devexpress as below:
https://www.devexpress.com/
If you have any further questions, please feel free to post in this forum.
Best Regards,
Leo

Overview of all the Grid Control Parts

It's pretty basic how the Grid Control database (OMR), Web Services (OMS) and agent components work together.
My questions is how these components use different tools such as PL/SQL, Java, OC4J, Application Express, XML and Perl to communicate and perform the work.
Can anyone point me to documentation for a BIG picture? Describe a overview how this component talks to that component.
What brings this up, is that I am doing an install. I see some Java errors and it is executing a perl script ConfigureGC.pl. What is really going on here?

Hi Sonja,
There is currently no way to do that, since there is no difference between the documents, linked or not. You can check the note 918386 which explains how this works exactly and why there is no way to know where the document was created originaly.
Kind regards,
Fabricius

Oracle 10g Grid Control Installation On RedHat Advanced Server 3.0

I am planing to install Enterprise Manager 10g Grid Control Release 1 (v10.1.0.3)
on RedHat Advanced Server 3.0. The agent I am trying to download is showing version 10.1.0.4.1. I am not sure iof this agent is going to work with (v10.1.0.3). Pl. let me know if someone has performed this installation. Do I need to apply any patch on OEM and agent.
Thanks
Raj

Actually, entirely the other way around, unless you like seeing errors in your OMS.
OMS must be at at least the same patch level as the communicating agents.
10.1.0.3 agent against a 10.1.0.4 OMS = OK
10.1.0.4 agent against a 10.1.0.3 OMS = Bad mojo
Download the 10.1.0.4.1 patchset from Metalink and update your OMS, or stick with the 10.1.0.3 agent if you've no access to metalink.

The Grid control installer has inside an Oracle Server ?

Similar Messages

Maybe you are looking for