The Groupwise WebAccess can be recognize after install
HI All,
After install the groupwise webaccess, I try to configure webaccess, this error shows
"GroupWise WebAccess is not installed. Please install it and run GroupWise WebAccess Configuration again"
I enable proxy module already.
Could you tell me how to debug this case?
Regards,
Ndhuynh
Originally Posted by ndhuynh
Thank you for your reply, dzanre!
Linux, SLES 11 SP3 with minimum installation.
I tried 3 times with another server.
After install Webaccess, I checked in the apache configuration and there is nothing related to webaccess like what i saw in groupwise 2012.
Updated: I have just installed webaccess 2014 successfull in the upgraded system(from 2012 to 2014) .
So I think the webaccess needs more requirement than ibm java 6 and apache2 & tomcat6.
Similar Messages
-
i have installed the version 6.01 in 3gs after installing we are unable to activate iphone ? why this message is showing again and again? what can we do now?
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(Hi:
You probably need to install the wireless card driver. -
Is there a way for the CC desktop app to recognize already installed software?
Is there a way for the CC desktop app to recognize already installed software? Initially the CC app had all my installed software listed but since one of the patches it no longer knows what I have installed. I can still use everything but I'm worried I will encounter issues if I am unable to change this situation. I have already looked through multiple discussions looking for an answer so if I have missed the solution my bad.
Cheers
KellyYou would have to run teh Cleaner tool and reinstal lfrom scratch. Something botched your installer database.
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium -
Can't update after install Yosemite
can't update after install Yosemite
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Will data be updated in the infocube if char. are added after instalation
Will data be updated in the infocube if charecteristics are added after instalation? can any one help me.
Nag,
do you mean tat the IO is added to te cube after data has been loaded ? ( I am not sure if you can do this )
If it means customizing the delivered version of Business content , you will have to add te IO o the update rules as well , and add the same if required to the Transfer rules and data source to populate date.
BW is not that intelligent enough to realize what IOBJ you have added and how you want it filled without you specifying the same.
Arun
Assign points if helpful -
i updated my iphone 4s to the new ios 6.1.3 after installing it the device displayed itunes with a USB symbol and cannot come up. please any ideas
Do as the diagram indicates: Connect your iPhone to your computer. Open iTunes on the computer and restore your device.
-
Is there a way to darken the dates (numbers) on the ICal calender. I can barely read mine after installing Lion.
I should note that the time stays on the left of the event name when I re-enter the text (which I had to do all the time before I found the "show event times" button) so I feel like there's a way.
-
Why the flash player don't work after installing the video downloader add-on?
I've installed and uninstall the Firefox mobile app several times to try and fix this issue. Every time I add the video downloader add-on the flash player won't let me tap to play videos anymore. I've tried to completely enable the flash but still didn't work. I've used this add on for a few months and it worked fine up until the last Firefox update. Without the add-on the flash player works fine but after I've added the video downloader add-on I would have to uninstall and reinstall the mobile spot to get the flash to work again. I really love to use this add-on that's the advantage that Firefox mobile app has over other web browser. Please tell me how I can fix this issue. THANKS
Hello FRYDAE
Welcome to SuMo help Forum,
Thankyou for reaching us here
About your problem , have you tried to clear your privacy/browsing data? And see if flash works?
And you can try to disable the add-on, if you don't want to use it . and enable it again if you want to download a video .
Cheers! -
Can't AirPrint after installing new router
After installing a new Virgin media router I can't print from my iPad or iPhone to my Airprint Epson printer. Works perfect from my Macbook pro on Lion. Worked fine before installing the new router on iPad and iPhone. Any ideas ?
OK fixed it. Had to Manually set up the printer to link to the wifi again from the printer control pad and now I can see it on my iPad and iPhone again. Good days.
-
After installing 7.3 last night, I hit restart and went to bed. My intel iMac i7 3.4ghz was powered down this morning, and only after unplugging,waiting, rep plugging,
It finally powered on, only to boot to the gray apple screen, go black and silent. (this exact issue had me lugging it back to apple a month after purchase, today is 93 days)
Recovery mode got me about one second further in bottling up before shutting off.
I was forced to upgrade from an unproblematic pc g5, after iCloud, so do not own snow leopard and was told I would never need a re install disc.
Has anyone having the powering off during boot after updating to 7.3?omg. I would copy and paste your original post to the iMac section. You're talking about a fine piece of equipment, the Intel iMac i7 3.4ghz , and you should not be having such problems. Maybe others in the iMac i7 community might also have some ideas.
Re: the safe boot. That's good that it worked. This is fairly new and very, very helpful with a dead computer because at least you can get to Safari, get to the Internet and get ideas and seek help.
But why did it shut off after a while? That's not right. No reason it should have done that.
From something you said I would worry about your power supply problem or this PerIphrEa. I don't know what that is but Migration is built into Lion OS, no? Third party perificials (or apps) can certainly cause conflicts and not work as well as advertised.
Also, seriously, I would get some tape, like duct tape, and tape up that loose power supply.
Why do you need something extra for your migration? (Or is the reason your old PowerPC G5 needs to run Lion but it can't?).
If that is the problem, here's an idea. Continue the canibalization of your PowerPC G5, take out it's hard drive(s). Buy an 'enclosure' to put the hard drive in and allow you to connect this hard drive to your new machine, the beautiful iMac i7, using the old hard drive as an external drive.
I did exactly this with my old PowerPC G5, using this enclosure, a Macally G-S350SUA, info at: http://www.macally.com/en/product/ipod4show.asp?ArticleID=215
I now use this for my Time Machine backups.
Re:What is the proper amount of time the computer needs to be unplugged? This would worry me. I turn off my comuter NOT by unplugging it but by holding the power on button for about 3-4 seconds and then it turns off.
I then wait 5 long seconds before pressing the power on button again to turn the computer back on.
Having to plug in and unplug and plug in and having to wait ten minutes for it to work is not normal.
Is there a power supply issue in your home, perhaps?
Considering the value of this machine and the fact that it may still be under warrenty, I'd consider the weeklong diagnostic. Would the machine have the same need to wait ten minutes to turn on at the Apple place?
What if you plug it in at a friend's house, or an office or library? Would it still take ten minutes before you could turn the machine on?
It might seem horrible to have to wait a week...or to do this again and again but I'd recommend taking full advantage of your warrenty, keep sticking this problem back to Apple and insist it gets made right. It will be worth it in the long run. -
After installing from FTP, I rebooted and then I tried to get some packages with pacman, but it didn't work. I'd like to know why I could connect to download the base packages but can't do it now.
I've checked almost all configuration files in /etc, I've modified some like hosts.allow and hosts.deny, with no results. Making a ping to my ethernet card shows that it works.
Pacman -Syu returns this error:
ftp.xxx.org temporarily unavailable
connection failed
ftp.other.org temporarily unavailable
connection failed
etc...
Please, tell me what do I do now. And yes, I did rtfm.You should still find the solution so you don't require the use of the initrd. While there are cases where using this boot method are required or beneficial, it is generally best to configure the system so it isn't needed if possible. Besides the slightly faster (perhaps not noticable to some) boot time, it also ensure that the system is properly configured for both hardware and security issues.
Of course there are those who think that if you are happy with things the way they are, don't mess with them. You probably won't learn much about AL this way though. -
I have an HP Pavilion zd7000 laptop with Windows XP & SP2 update installed. Processor is Intel Pentium 4. My system is clean with no rubbish software running. I have several anti-malware & anti-spyware systems installed but they are dormant & not running during the attempted installation. SP3 almost completes installation but freezes at "Finishing" stage showing "Running processes after install". Anti-virus is of course switched off. The system then hangs fore-ever with hard disc activity showing intermittently but nothing else happening. Luckily, by holding down the laptop on/off switch I can always eventually restore to previous settings & recover full use but without SP3! This is annoying & frustrating. I have seen a lot of threads about this problem but no real answers. Can anyone help please?
What is Shmrate.exe is not running?
This can be read two different ways
One well if you look at it like this
User>shmgrate>Operating system>drivers>computer. Result is denied!
If you have something like this
User > User Account Control >Operating system>drivers>computer. Result is denied again!
Note that an adminstrator is only a adminstrator and Computer Adminstrator can install Sp(s). Which I believe is tyour question. Which is my guess.
Which is the reason some people reccommend installing from the "Adminstrator" account Which generally is not a User account. Yes some people add and modify there account access by using Subinacl.exe and reset.cmd, which bumps the account from adminstrator to Computer Adminstrator. An alternative is to boot into safe mode. Pressing the *F8* key before the windows welcome screen starts up. And selecting safe mode. Which is why more people report success with using the .ISO install.
To add to your confusion. Windows Sp2 usually has windows installer 3.0, or windows installer 3.1
Table us types of accounts. I wish windows 200 documentation had made it completely into Xps documentation. They had an excellent table with tthe types of accounts
Limited user. Not able to run more then basic programs. Not able to ;install device drivers, not able to install progras, not able to install Sp(s)s
Power user Able to run more advanced programs. IE Defragger.
adminstrator. Mess with the operating system, back up things, able to install programs, add users.When Windows Xp is installed this is the type of user associated with adminstrator. NOT CA
Computer adminstrator. Able to Install of all things Sp(s).
Hopefully this helps you out. Of course there is the release notes, Xp solution center and of course things to do before installing Sp3.
Keith -
Oracle XE - Just can't login after install
On Lubuntu 10.10, I did:
echo "deb http://oss.oracle.com/debian unstable main non-free" >> /etc/apt/sources.list
apt-get update ; apt-get install oracle-xe
That brings me Oracle XE 10.2.0.1. And then:
/etc/init.d/oracle-xe configure
Everything looks ok, including the password prompt and so. After that, I go to http://127.0.0.1:port/apex, and when I try to login with the username "SYSTEM", and the password I just typed. I get a "Invalid Login Credentials" error.
I also tried:
sqlplus /nolog
CONNECT
[ .. login and password .. ]
ERROR:
ORA-01017: invalid username/password; logon denied
Setting the environment variables also don't help.
sh oracle_env.sh
Well.. I just don't know what's happening. I repeated this procedure trying to find peculiar things, but always got the same results. Also tried some other users as "SYS". useless...
Thanks in advance.Oracle 10g Express on Ubuntu 10.10 AMD 64-bit howto
Oracle 10g Express on Ubuntu 10.10 AMD 64-bit howto
Oracle 10g Express on Fedora 14 64-bit howto
Oracle 10g Express on Fedora 14 64-bit howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to (revised)
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto -
Hi,
After installing the prerequisites from the document - CiscoPrimeServiceCatalog_10_0_IntegrationGuide.pdf
and image - CPSC_10.0.0R2_unix.gz , on a red hat machine. and oracle version - oracle-xe-11.2.0-1.0.
But the installation logs has an error, as follows -
"Database exception at line: 9972 in file "/opt/CiscoPrimeServiceCatalog/schema/release-12.0.0/schema/CreateIndexes-ORA.sql"
RDBMS message : ORA-01658: unable to create INITIAL extent for segment in tablespace SYSTEM
ORA-06512: at line 7"
Please suggent a work araoundHi,
I have tried to log in the application
http://bizapp.casa.com:8000/OA_HTML/AppsLogin
but I have got an HTTP 500 Internal server error.
But the server is working because I have got a response on this address:
http://bizapp.casa.com:8000/
Any ideas what is happening?The URL Should be
http:/bizapp.casa.com:8000/OA_HTML/AppsLocalLogin.jsp
not
AppsLogin or AppsLogin.jsp
Thanks
Maybe you are looking for
-
Firefox 4.0.1 new features did not install.
I installed Firefox ver. 4.0.1 but everything looks the same as before the install. The only noticeable difference is that the '''Home Button''' did move from the middle to the right side. When I check '''About Firefox''', it does list the version as
-
How do I get my mac pro on airplay?
I just bought my Mac Pro and a Apple Tv box. How do I get my Mac to show on Airplay? I see nothing in the manual for it.
-
Messages are in "To Be Deleivered ". State
Dear Experts, We are getting the following error in RWB ,Adapter monitoring which made All the messages are in "TO BE DELIVERED" status. Please suggest any ideas to resolve the same which can be rewarded accordingly... Adapter Engine, message: Fatal
-
Missing text in completed fillable forms
Hi I've created a job application form for my organisation and used Adobe Acrobat to make it interactive (fillable). We have numerous issues when receiving completed forms. Some people send forms back to us and there is nothing in them whatsoever, ye
-
How can I use Notes in Yosemite on my Mac Book Pro? I used Notes on Lion but cannot view Notes on Yosemite? Many thanks, Rick