The head of an AC adp

I got the amrican AC adptor with the head that look like this (front view)
| |
| ? ? |
|_________ |
I want to get the head for the 220 Volt for israel and not use a transformator!
it looks like this
| \ / |
| \ | / |
|______|______|
or two like this
| |
| ? ? |
|____________|
Where can i buy them ? or it's
I don't wanna buy the all uni'versal set...

Not sure what you mean by a transformator... but why not just buy a socket adapter?
Your only other option is to buy a whole new adapter (if you can find one that has (a) the correct plug and (b) the correct rating), or get the travel adapter.

Similar Messages

The head phone jack on my brand new iPod touch 5th generation is not working properly

The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

How to add an image in the header? Pages 5.0

I don't believe I have to use Microsoft Word! I can't, no way, add an image in the header. This is unbelievable!
**** time I updated to Mavericks!
Please, does anyone know the solution?
I'm losing a great deal in my company.

Do you still have Pages 4.3 installed. If so, use that.

How to put the header in excel file in GUI_DOWNLOAD

Hi,
I have a requirement , Which I m downloading the contents of internal table using the GUI_DOWNLOAD in excel format, I need to keep the first line of the excel sheet as a header, Can any one suggest how to go for this,

Hello,
You can have the data in the data tab & field name in the field tab. And so you can download both the field name and the value for the same using the FM u2013 GUI_DOWNLOAD (File type should be u2018ASCu2019).
Hope, you need additional information to be added as the header.
One option: You can call the GUI_UPLOAD twice.
First one with the header in the data tab.
Second one with the option append = u2018Xu2019 with the actual data and header and pass the same above file name as input.
Also, there is a solved forum already exists but with a different solution. You can go through the below link also:
Re: GUI_DOWNLOAD with Header
Regards,
Selva K.

Removing the header and footer in Pages

I just began to use Pages after purchasing a new ibook. In AppleWorks, headers and footers were never inserted by default. In Pages, how can I remove the header and footer in Pages so I can have more space for the body section of the document?

I had already set page margins to zero, and I disagree with you: Headers and footers still appear with a height of approximately 1/8 inch.
SInce I posted my previous message, I have experimented a bit. I was able to (almost but not quite) totally eliminate the header and footer by clicking into the header and footer area and reducing the font size to the absolute minimum. After having done that, the body was basically in-line with 0" on the vertical page ruler.
Also, in my opinion, whether or not most printers do a full page bleed is irrelevant. I should be able to work with the page body without its being offset from the page ruler if I don't want to employ a header or footer.
Rusty

Need to display a value before the header based on a user parameter.

I have a select on the user parameter list of values.
SELECT DISTINCT GROUP_ROWID, STR_GROUP_NAME
FROM TBL_COMPANY_GROUP;
I select the option hide the first column in order to show only a list of values and not the row_ids.
I need to display the str_group_name within the header as a title. I insert a field in the header and in source select the name of the parameter p_groupid but the only thing that I get is the row_id value not the name. I use the row_id to pass it on my queries but I need the name value in the header. Any ideas? Please help.
Thanks.

create a parameter called p_header.
in the after parameter form trigger
select str_group_name into :p_header
from tbl_company_group
where group_id = :p_groupid;Have the header field source be p_header.

Creating a formula for the Header to evaluate each record in Detail

I want to create a formula that notifies the user in the Header if there is a certain value in the report detail. I was able to create the formula but it only gave me the correct message when the 1st record in the detail had the value. Is there a way for it to read ALL records and if any of them have the value, to display the message?
Example:
Formula in Header: if ({@Total}>1) then "ERROR"
There are about 500 {@Total} fields in the detail and my formula only looks at the 1st one in the list.

Hi Shannyn,
There is this in-built faility provided by Crystal Reports called as 'Alerts'.
This will help you meet your requirment.
For more information on functionality / Creation of Alerts, please go to Crystal Reports Help and search for 'Alert'. You will find it very helpful.
Hope this helps.
Regards,
Jay.

Download from ALV are all in one column including the header

Hello All,
We are having problems with the download of excel from ALV grid. what happens is that instead of the data dispalying in different columns, it is all in one column, including the header. what could be the problem? this only occurs in the production system but in the development and quality it is ok.
Thanks for your help.

Hi,
We also used the option download to local file and it works fine. Only the button download to excel is not working as expected.

ALV Report how to display from and to date values in the header.

I develoeped alv report . i want to display selection screen from and to date values in top of page...
any sample code pls guide me..

You have to do many things...
first find the selection details using the FM.
RS_REFRESH_FROM_SELECTOPTIONS
use the Blog to Align/populate the Header from the selection table
/people/community.user/blog/2007/05/07/alignment-of-data-in-top-of-page-in-alv-grid

How to add 2 more field to the Header of FBL5N ALV report output

Hi All,
I have copied and made some modification to the standard transaction FBL5N and added some fields to the ALV report line Items but how to add fields to the header part i.e if you execute the transaction FBL5n, you will get the ALV report, in the header part customer no, company code then I need to add the 2 more fields. can any one tell me that which structure or where I need to add these fields to be appear in ALV output screen.
Thanks in advance.
Swapna.

Hi Mohamed,
If you copied Z-FM successfully, then you have to go to subroutine TOP_OF_PAGE to add your field:
*&      Form TOP_OF_PAGE
FORM top_of_page.
DATA: b_suppress   LIKE boole-boole,
        opfi_text    LIKE eptext OCCURS 10 WITH HEADER LINE,
        n_color      TYPE i.
* IF     NOT it_items-bukrs IS INITIAL               "737295
*     AND NOT it_items-konto IS INITIAL               "737295
*     AND NOT it_items-koart IS INITIAL.              "737295
gs_items = gt_alv.
* ENDIF.                                             "737295
* skip first call at top of page:
IF NOT gd_first_top IS INITIAL.
    CLEAR gd_first_top.
    EXIT.
ENDIF.
IF x_grid = c_x OR x_inet = c_x.                          "1012201
    PERFORM grid_top_of_page.
    EXIT.
ENDIF.
*... open FI: get header text.
* first fill some RFXPO fields for general info:
CLEAR: s_rfxpo, wa_kna1, wa_lfa1, wa_ska1.
s_rfxpo-bukrs = gs_items-bukrs.
s_rfxpo-kkber = gs_items-kkber.
s_rfxpo-koart = gs_items-koart.
s_rfxpo-konto = gs_items-konto.
s_rfxpo-vrbez = gs_variant-variant.
s_rfxpo-waers = gs_items-waers.
* update master record:
PERFORM fill_master_rec USING gs_items-koart
                                 gs_items-konto
                                 gs_items-bukrs. " note 698396
CALL FUNCTION 'OPEN_FI_PERFORM_00001640_E'
    EXPORTING
      i_rfxpo             = s_rfxpo
      i_kna1              = wa_kna1
      i_lfa1              = wa_lfa1
      i_ska1              = wa_ska1
    IMPORTING
      e_suppress_standard = b_suppress
    TABLES
      t_lines             = opfi_text.
*... display open FI text:
IF x_konto_sort = 'X'.
    LOOP AT opfi_text.
      CASE opfi_text-color.
        WHEN 1.
          FORMAT COLOR 1.
        WHEN 2.
          FORMAT COLOR 2.
        WHEN 3.
          FORMAT COLOR 3.
        WHEN 4.
          FORMAT COLOR 4.
        WHEN 5.
          FORMAT COLOR 5.
        WHEN 6.
          FORMAT COLOR 6.
        WHEN 7.
          FORMAT COLOR 7.
      ENDCASE.
      WRITE: / opfi_text-text.
    ENDLOOP.
    FORMAT RESET.
ENDIF.
*... display other header text:
IF b_suppress NE 'X'.
    PERFORM display_custom_header.
    PERFORM display_ccard_lines.
ENDIF.
" Put your field somewhere...
ENDFORM.                               " TOP_OF_PAGE
Good luck,
Thanks,

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

How to remove the header in Report from SQVI

Folks,
I created a report by joining 4 tables in SQVI, the output data is around 200 pages. I need to remove the header from the report so I can down load to a excel.
Can some tell me how to switch of the header in SQVI ( Layout Mode). I did this before using Legend on/off but I quite didn't remember how I exactly did it.
Thanks,
Kumar

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to use a dynamic SQL data as the header ?

I'm using BO XI Rel 2. I have hard coded the report headers, but i do have a table wherein the header data is available. I like to fetch the HEADER information from the table, rather than hard coding. How to go about it?
Example: "Statement of Closing" is the header.
The above output can be retrieved by using the below query!
Select Form_desc from TBS_FORMS where form_id = 'tbs1a';
form_id is a common link between tables!! Since the actual report data has multiple value as output, just by plugging the query in the header, i'm getting #multivalue error!!!!
In oracle reports, i have something called place holder to achieve the above objective. In BO, how to go about it?
Edited by: Karthik Ganesan on Dec 28, 2008 1:22 PM

Sorry, that doesn't solve my problem. Please read the question more closely - I want my USERS to be able to do this without changing their configurations. My users are public school elementary teachers and parents. I can't ask them to toggle any settings - I'm looking for a way that my users can do this on their own.
Thanks

In Pages '09, how do I remove the header from the first page of the document in a page layout document?

Working Pages '09, I am trying to set up a multi-page document using page layout (not a word processing document, because I'll be using lots of graphics and text boxes), with headers and footers, but no header on the first page, as this will be the title page. The layout>section pane has the 'First page is different' option greyed out (because it's a word processor only option). Help tells me that each page is it's own section in page layout, but there is no way to have one page without a header and all the others with, as far as I can tell. Am I completely missing something or is there a way around this?
Also, I want to do this again for additional chapters in the document (or else, I believe, be forced to manually start page numbering for each chapter in a new document).
Cheers.

Hi, Barry. I don't know why this solution didn't work for me :-\ Does it matter that my page numbers are in the footer and not the header? When I follow your direction, the pages do get numbered differently. My problem occurs with the last step.
1. Open the Inspector. (Check!)
2. Click the Layout button (second from left). (Check!)
3. Click Section. (Check!)
4. Make the two settings shown: (Check!)
5. Go to Page 1 and delete the contents of the Header. (When I do this, the content for all footers is deleted...)
I really appreciate your insight.

The head of an AC adp

Similar Messages

Maybe you are looking for