The help language is wrong

H. I just upgraded the E71 software to 500.21.009. Text is correct everywhere, expect in the help section. The language there is some Slavic variant. Does anybody of you know how I can change this to Norwegian?

Notaclue,
The NI Service Manager is a display interface that shows the Citadel Server, the Time Synchronization Server and the Classified Ads Services running on your system. These services are a part of Logos, a National Instruments communication protocol. You can install it from: http://digital.ni.com/softlib.nsf/954feaeea92d9091​8625674b00658b83/c1a484551a75614686256ae300734336?​OpenDocument
As for the help text not being installed properly. I think the best bet would be to try to unistall all versions of FP Explorer from the machine and then try to reinstall the FP Explorer 3.0.1 from:
http://digital.ni.com/softlib.nsf/954feaeea92d9091​8625674b00658b83/7c99c563a473bc8686256b520056a923?​OpenDocument
or you can install the latest FP Explorer 3.0.2 from: http:
//digital.ni.com/softlib.nsf/954feaeea92d909186256​74b00658b83/f6b2ba037de6800986256c670054d93d?OpenD​ocument
Hopefully it would install the help correctly.
Pravin

Similar Messages

  • Help language

    I have Logic Pro X installed on a MacBook Pro ...How do I change the HElp language from German to English.

    There is a known weird bug that affects certain OS X/Mac setups.. and somehow forces the language of the built in help guide to a different language than intended.
    However to test if you actually have to correct language selected...
    Set your language in OS X's system preferences.... Language and Region
    Restart your Mac afterwards and test
    If you still have the same problem.. use the online version here instead... (Language changer can be found at the bottom of the righthand side..)
    http://help.apple.com/logicpro/mac/10/
    or download a pdf version found here...
    Logic Pro X - User GuideJul 16, 2013 - 84 MB

  • How  do i change the language from spanish to english in the help file

    Can you tell me how do I  change the language in the help file from spanish to english?

    You can do this in the dropdown near the bottom of the Help landing page:
    SG

  • How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

    How do I cancel the distance between the numbers?
    I'm having trouble copy phone numbers from the phone book and send it via SMS
    This problem I've found in the Arabic language, numbers appear in reverse
    Please help
    System 6.0.1

    MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
    Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
    Ignore the last frame and first frame indicators.

  • HT1657 how do i exchange a downloaded series in the wrong language to the right language without paying twice?

    How do I exchange a donwloaded serioes in the wrong language to the right language without paying twice?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

    I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

    If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Help required to recognize the correct language import package

    Hi friends,
    I am trying to import ukranian(UK) language to SAP system using SMLT transaction.Please help me to identify the correct 'language import package'
    from the DVD dump.I cannot recognize the correct DVD .I am not clear how do I realize the exact package from the DVD dump.Kindly help me.
    Regards,
    Syam krishnan

    Hi Syam
    Please refer the TWO notes for clarity
    Note 97476 - Language availability R/3 4.0x - 4.7x, ECC500
    Note 517310 - Ukrainian language import has been filled w/ Russian
    Cheers,
    Shyam

  • He used Spanish and stable Firefox 3.6 to Firefox 6.0.1 update now stable but the language changed to English, how do I put the Spanish language if you do not get the xpi package in Spanish. Thanks for the help they can give me.

    I can not get the Spanish language package before updating my Firefox 3.6 was in Spanish and now the updated version 6.0.1 I get in English, I want my Firefox 6.0.1 in Spanish please.

    If the Firefox user interface (menu bar) is in the wrong language or if you want to change the current language then you can get Firefox in the language of your choice here:
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Remove (uninstall) the current Firefox version.
    * Install the new Firefox version of the wanted language.
    *http://kb.mozillazine.org/Installing_Firefox#Linux

  • I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

    I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

    Argh that's frustrating! I never noticed that key did not work in InDesign.
    A bit of research and it turns out the MS Office has this as an option in their software. But I cannot find an option in InDesign preferences to make this work.
    However, somethings are not listed in the shortcuts and preferences and are hidden triggers in InDesign which can be accessed through a script.
    I'm not saying it's possible to activate the Insert Key through a script, but it's plausible that it can be activated.
    Maybe ask on the scripting forum? InDesign Scripting
    I know this may be a possibility as with InDesign's earlier versions of PDF export to interactive documents there previously was no way to export interactive pdfs as single pages if in Spreads.
    But the option to toggle this setting was scriptable.

  • How do I change the language of the help files?

    My CS6 is set for English, but the help comes up in a language I am not good at. How do I change that?

    Chenge it in the help client that comes with the software or use the online version.
    Mylenium

  • Garage band help appears in a foreign language. can i change the help to english?

    in os 10.9.7 garage band help appears in a foreign language. Can i change the Garage band help to help to english?

    The GarageBand help is supposed to use the language that is set as your Primary Language in the System Preferences:
    Check the settings, drag the language you want to use to the top of the list,  and restart the system .
    I that does not fix it, reinstall GarageBand. Then the correct language files are probably missing in the application bundle.

  • Search help is populating the input field with wrong data

    Hi Guys,
    I have created a ZCITY table for which has below 2 field
    ZZCITY (Code ) (5 Char) u2013 Key field
    ZZNAME (City Name ) (40 Character)
    I have added a custom field ZZCITY & ZZNAME in CI_CATSDB. Funtional guy has configured to make ZZNAME as  VISIBLE  and ZZCITY is HIDDEN on CAT2 screen in Data Entry area.
    I created search help on table ZCITY with export parameters as  ZZCITY and ZZNAME.
    In SE11, I have mapped the export parameters with CI_CATSDB
    Now in tcode CAT2, when I press F4 on City Name field, the list is displayed with City code and City names. And when I select any city code, the ZZNAME is populated by City code instead of City name.
    I want that City Name should be populated in ZZNAME and City Code should be populated in hidden field ZZCITY.
    Please tell me how I can fix this problem.
    Thanks in advance.
    mini

    Hi
    Try selecting the Improting Check box aswell. if a screen field is hidden or display mode we can not use F4 help for that field.
    you can also take the help of DYNP_READ_VALUES to get the selected value before PAI
    Check whats happening in Debug.
    Cheers
    Ram

  • Is the help file wrong, or is it me?

    Ok, so I am working through the help files, and am working on
    "Enhancing the Hello World application", and I keep getting an
    error message:
    "1119: Access of possibly undefined property keyCode through
    a reference with static type flash.events:Event."
    Which is apparently having trouble with the following line of
    code:
    if (event.keyCode == Keyboard.ENTER)
    The code is verbatim from the help file. I have checked
    through and seen that keyCode does exist. Any thoughts?

    Reify32207,
    > I keep getting an error message:
    >
    > "1119: Access of possibly undefined property keyCode
    through
    > a reference with static type flash.events:Event."
    What you need, in this case, is an instance of the
    KeyboardEvent class.
    The Event class, alone, doesn't have a keyCode property, but
    KeyboardEvent
    (which extends Event) does.
    > textIn.addEventListener(KeyboardEvent.KEY_UP,
    keyPressed);
    > function keyPressed(event:Event):void
    That second line is the culprit. Should be this:
    function keyPressed(event:KeyboardEvent):void
    David Stiller
    Co-author, Foundation Flash CS3 for Designers
    http://tinyurl.com/2k29mj
    "Luck is the residue of good design."

  • I have an airport extreme and am trying to extend the range of the wireless network with an airport express.  I set it up with the help of apple support, both lights are green on both airports, but the range didn't change.  What could be wrong?

    I am trying to extend the range of my wireless network by adding an airport express to an airport extreme.  I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house.  What could be the problem?  Does weather affect the wireless network??

    So, on the Extreme you checked the box to "allow this network to be extened" ?
    Correct?
    And on the Express, you set it up to "Extend a wireless network" ?
    Correct?
    See this Apple article and see if you missed anything...
    http://support.apple.com/kb/HT4145
    To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
    Set up: Components of an extended network
    ➊  Primary Wi-Fi base station (this is the base station connected directly to the Internet)
    ➋  Extended base station
    Configuring a wireless extended network
    To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
    Start with the device that will be configured as the primary Wi-Fi base station.  Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
    If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.

  • The "Edit Numeric Limit Test" help page is wrong

    The last four limit types incorrectly say "and" where they should say "or" in the limit comparison.  The software gives the correct information in the status line just below the limit type editing screen, only the help file is incorrect.

    David@Work -
    Thanks a ton for reporting this!  I went ahead and documented this for fix in a future version of the software, and I also documented that the Multiple Numeric Limit Test documentation is incorrect, as well.
    For your reference, this was reported to R&D #118475 for further investigation and fixing. 
    Thanks again for your feedback!
    Derrick S.
    Product Manager
    NI DIAdem
    National Instruments

Maybe you are looking for