The home share is not turned off i want to turn it off
The home share is still on I want it turned off help
iTunes menu Advanced > turn of Home Sharing.
Similar Messages
-
i am having trouble home sharing i have turned it off and on again it worked on my 4s before i backed everything up and switched to the 5s the home share is not even an option when i open music or videos on either of my phones
i am having trouble home sharing i have turned it off and on again it worked on my 4s before i backed everything up and switched to the 5s the home share is not even an option when i open music or videos on either of my phones
-
Cannot get home sharing to work with my new apple TV. Have the latest version of ITunes and the apple TV is connected to my wi-fi network. The instruction page says to go to the Advanced menu option of ITunes and choose Home Sharing. This option does not exist. The closest I can find is under the File option>Home Sharing where my only option is to turn off home sharing. There is no home sharing icon and Apple TV insist that the home sharing is not turned on.
I must be missing something obvious here.Cannot get home sharing to work with my new apple TV. Have the latest version of ITunes and the apple TV is connected to my wi-fi network. The instruction page says to go to the Advanced menu option of ITunes and choose Home Sharing. This option does not exist. The closest I can find is under the File option>Home Sharing where my only option is to turn off home sharing. There is no home sharing icon and Apple TV insist that the home sharing is not turned on.
I must be missing something obvious here. -
Apple TV 2 does not accept my Apple ID and passcode to turn the home share on. Help me!!
Apple TV 2 does not accept my Apple ID and passcode to turn the home share on. Help me!!
start here: Troubleshooting Home Sharing with Apple TV (2nd generation).
-
What do I do when it says the selected files could not be copied becasue the machine is not a member of the home share?
You dont say how you are connected to PC .
This is how i copy data .
USB Mass Storage mode .
Use Windows Explorer to open memory card and copy .
Your free space problem if not resolved copy data off memory card to pc then back .
jje -
IPhone 4 is stuck in the telephone screen, will not turn off by holding down top button or main menu
iPhone 4 is stuck in the telephone screen, will not turn off by holding down top button or main menu, can't send texts, emails, check internet etc.,
Hold down the home and power buttons until the Apple logo appears(about 15 seconds). It should then restart.
-
I have follow all the settings for the home sharing but when I turn on the TV & go to computer then movies it still saying that the home sharing is not connected.
See
http://support.apple.com/kb/ts2972 -
my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything
Get it fixed then, make an appointment with the Apple genius bar.
-
I´m just starting using ATV2. All is working well excepted the home share. It start working and few minutes after not more. What a ihave to do?
What I have to do to solve this problem? To get the home share working again i have to restat avering thing and then it works for a few minutes again. It is crazy
-
My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.
Hello Sabroso007
Check out the article below to troubleshoot the sound output to your Bluetooth speaker. Check in System Preferences > Sound to see what the output is set to.
OS X Mavericks: Set up Bluetooth audio devices
http://support.apple.com/kb/PH14217
Regards,
-Norm G. -
My ipod has just black screen and the home button is not working. what will i do? help please!
my ipod has just black screen and the home button is not working. what will i do? help please!
Try:
- iOS: Not responding or does not turn on
When it says place the iPodin recovery mode use this prgram.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I hit "Turn Passcode on" and then enter the passcode I want. Then it brings me back to the Passcode Lock Screen, NOT turning on my passcode. Now this iPod touch is a gift from my family, used before me. I set up my iTunes account, but when i view my Apple account it's not showing up. Is this the reason my iPod isnt working? Please help.
The users guide says:
Passcode Lock
By default, iPod touch doesn’t require you to enter a passcode to unlock it.
Set a passcode: Choose General > Passcode Lock and enter a 4-digit passcode, then enter the passcode again to verify it. iPod touch then requires you to enter the passcode to unlock it or to display the passcode lock settings.
Turn passcode lock off: Choose General > Passcode Lock, enter your passcode, and tap Turn Passcode Off, then enter your passcode again.
Change the passcode: Choose General > Passcode Lock, enter your passcode, and tap Change Passcode. Enter your passcode again, then enter and reenter your new passcode.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
I can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?
i can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?
Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
if no result try to back up and restore via itunes on a computer.
if wont restore try this
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
My iPod Touch 4th Generation is crashing a lot. And the home button is not working.
Recently my iPod would crash when I go on Youtube or any other app or it would be super slow. My current IOS is 6.1.3. The iPod starts working again when I turn it off and on but only for a couple of minutes. Also the home button does not work when I press it.
To reset the iPod without the hardware buttons,
- Reset network settings: Settings>General>Reset>Reset Network Settings. All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected. You will have to rejoin wifi networks and repair BT devices
Next
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I'm having an issue where my Apple TV 3 and all our iPads periodically seem to loose connectivity to an iTunes home share on a Windows 7 PC. Using a network protocol analyser on the PC I have identified that the point of failure corresponds to the ATV3 sending a bonjour discovery request and getting no reply from iTunes. Why the ATV3 'forgets' where the home share is is possibly another issue but the root cause of the failure is that iTunes, or more specifically the mDNSResponder service, is not responding to the UDP multicast port 5353 broadcast discovery packet sent by the ATV3 or iPad. The mDNSResponder service does start responding again after iTunes is restarted thus making the home share accessible once more, however, this frequent drop out is unacceptable and often happens after only a single TV show has been watched from the home share making the solution unworkable for a family, we simply cannot be restarting iTunes constantly it ruins the user experience completely!
The nature of this failure indicates that the ATV3, the iPads, the host PC and network are all working correctly and the point of failure here is the lack of response to the bonjour discovery protocol with the net result of either a spinning 'connecting to home share' message or the home share just disappearing from the computers section.
If there is a configuration fix for this please let me know as I haven't located a fix! Otherwise this seems very much to be a code flaw in iTunes 11 or the mDNSResponder and I would appreciate some input from Apple! Going on other questions in these forums it would seem the problem is not limited to Windows PCs but also Macs too. NB: This is not a TCP issue, when the ATV3 or iPad knows the IP of the iTunes server all works flawlessly, it just periodically they seem to refresh the list of home shares and at this point they loose the information about the home share they have just been using because of the non-response to the UDP multicast discovery broadcast packet, that is arriving at the host PC and isn't being blocked by the firewall.
Many Thanks!In my case there was no import from a former mac.
My problem (at least mine) is that no app that offers media sharing works properly. Neither itunes home sharing nor AirVideo nor EyeTV sharing.
So I'm pretty sure that this is network issue.
Adding another user on my mac and sharing a new library works not also. But sharing from another laptop in my WiFi works. So this has to be a network issue on my mac, not only my user, but an issue of the whole system.
But I'm not willing to reinstall MacOS X for that if I don't have to.
Maybe you are looking for
-
Accessing the controls in initiation form in SPdesigner 2013 workflow
Hai , I created a re-usable workflow in SPdesigner and i created a initiation form for this workflow. In my initiation form i have 6 controls. First control is drop down list it contains 4 values and other 5 controls are checkboxes
-
Neither Bridge CS6 or Lightroom 5.7 can recognize Canon's raw file (Canon Camera 60D). This only started a few months ago without any change that I made to the system Any clues?
-
Problem in the monitoring with 12c
Hi All, I deployed the agent into two machines with OAS. A host level if sample data monitoring (CPU, network ...) but the forms or http or remains in a state pending . I review the agent status and is correct oraias@XXXXXXXX:/datos/oraias/app/agent/
-
Orchestration takes more than 30 mins to open
Hi all We have BizTalk 2013 Server, and our development enviroment is Visual Studio 2013. Any time a new Orchestration is added to the Project. It takes more than 30 mins to open the Orchestration What could be the issue here? Thanks in Advance for y
-
My Photoshop elements 8 won't let me open my raw images. I have done it before but recently had my computer cleaned up. How can I fix this?