The horizontal line of photos....

How do I make the horizontal line of photos, the one you can scroll through, appear at the bottom of the page of photos?
Did it disappear with 4.3.2 or am I doing something wrong?

I'm on 4.3.2, and with a photo in full screen mode, a single tap on the photo still shows/hides the small thumbnails at the bottom for me (and shows/hides the time bar and slideshow menu at the top)

Similar Messages

What causes perforated horizontal lines on photos

I own a 3310 all in one and it started showing perforated horizontal lines on photo when done.
This question was solved.
View Solution.

That will help to indeed :-)
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Any chance of increasing the horizontal line height in ADG?

Hi All,
I am using AdvacnedDataGrid with Horizontallinesdisplay set
to true.
Can I increase the height of the line, so that the line would
look bold or thicker?
Regards
Surendran

"COKFlex" <[email protected]> wrote in
message
news:g7e5d1$m0v$[email protected]..
> Hi,
>
> Thanks for the suggestion. If I try separatorSkin I cant
change the height
> of
> the skin through any proerpty. Since I cant see any such
property.
No, you'd need to extend the skin to make this happen.
> What all I want to know is about whether we can change
the height of the
> horizontal line through any property?
You might also be able to extend AdvancedDataGrid itself.

Display the horizontal lines whether or not a section is empty.

I am using CR with vb.net 2010 and latest version of CR for net 2010. I want to print a report like a grid which means horizontal and vertical lines appearing whether or not there is text in a section.
I have a box surrounding the report and vertical lines extending down the report. There are two group headers and a details section.    The horizontal lines only appear when there are values in the group or details sections. Thus, once the detail lines end (and therefore there are no more groups either) on a page, the horizontal lines stop though the vertical ones continue. I want the horizontal lines in the sections to continue as well -- just like in Excel.
There is a page break for the top group so there are lots of pages that have detail lines empty. How do I print horizontal lines in those sections as well when there are no values.

hi Suzanne,
there are several different ways of doing this.
1) the easiest way of doing this is to create a new Page Header that contains all of the lines. this works if you've got a report that is static in way that each page is laid out. make the new page header the size of a page in length, move it up so that it is Page Header A, and go to the section expert and set it to Underlay Following Sections. now add the grid lines to this new page header A.
2) another way of doing this is to create a whole bunch of Details sections....e.g B to Z. put lines in these sections. write a conditional suppression formula for each one based on how many records there are in a group. this is way more work.
3) another fairly easy way is to create a formula that outputs the horizontal lines...i.e.
     numbervar N:= 10;
     // you'd need to figure out what N is based on the number of existing records and the number of lines you want
     replicatestring(replicatestring("_",300) + chr(10), N)
make sure that you right click on the formula and go to Format Field > Common tab, and set it to Can Grow.
-jamie

My problem using iPhoto Having the horizontal lines going through the photo when printing of a website

My problem is using the I Photo and printing a picture with horizontal lines going through it

Your topic title and topic content are a bit confusing? Are you printing a website page? That would be thru Safari or other browser.
Or is a photo from a website? If so how was it imported into iPhoto?
Also what system and iPhoto version are your running?
Does the photo print correctly from Preview or other application?
What's the pixel dimensions of the image?
How much free space do you have on your boot drive?

What is causing horizontal lines in photos after syncing with iPhoto?

I have the iphone4s and iphoto11 on a MacBook Pro. All of my photos look fine on the MacBook but when I sync it with the Iphone and then look at them on the iphone many of them have horizontal lines in part or all of them. I have repaired the database and rebuilt the thumbnails and deleted the photos on the iphone and re-synced it but the lines all still there. Anybody have any ideas?

Hi klapfaddle,
Try cleaning the printhead up to 3 times. To do this, press the "wrench" icon on the control screen of the printer, select Tools / Clean Printhead. Did that help?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

I have a 4500 G510n that leaves horizontal lines in photos when printing

When printing photos I get horizontal lines about 1/8 inch apart from the top to bottom. I have tried to set the print quality to a better resolution and it doesn't make any difference.

I understand you're getting horizontal lines when you print photos. I would take a look at this document.
Let me know how it goes.

Making a slide show and can only see the top 1/4 of the bottem line of photos in the project. help?

I am working with beat markers and it was going along fine until suddenly everything went awry. I dropped in a bunch of photos and the last photo assigned itself a time of over 3 minutes. Beat markers are at less than 1 second. I have removed the beat markers for the photos I want to remove, in order to try again. When I try to delete the 3 minute picture the entire project loses its beat markers AND on top of all of that, I can only see the top 1/4 of the pics in the bottom line of the project. I've tried several work arounds and can't fix this. Anyone have suggestions?

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

The horizontal line has been appiered at the bottom of the touch screen. In addition to that problem the screen starts blinking after 3-5 minutes of use. I bought it 4 months ago.

Please help me to resolve a problem with my iPod touch. It has horizontal line at the bottom of the screen and screen starts blinking after 3 minutes of use. It's so frustrating as I bought just 4 months ago and didn't even think tha apple products have such defects.

All electical producs have defects. Apple products are not immune.
To rule out a software problem try:
- A reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
- If still problem make an appointment at the Genius Bar of an Apple store. If the iPod is defective you will walk out with a replacment.

Cannot get rid of the horizontal lines (field order or interlacing?)...

OK- I have footage which is 25fps DV Pal 720/576 (was shot on tape, 4:3 letterboxed), lower field/even which I am editing into a short 25 second sequence which needs to be 16:9 (as my final project will be that, and this footage/sequence is the only 4:3 one in the ten to be used).
The current sequence I have worked in is showing up as 25fps DVCPRO Pal 1280/720 also lower field/even and it is working OK (NO idea how!) except for the clips I am shrinking for a multiple screen section- they are shrunk to 45% and quite interlaced looking- meaning that I am seeing quite bad horizontal lines even in the playing back of the sequence, before export.
Notably one clip is FINE- it is different in that it has been "grown" to 180% because of the fact that it was 4:3 letterboxed and I needed it to appear 16:9. I see no interlacing/field order issue...
What do I need to do in order to "fix" this now that I have a gorgeous sequence and cannot export it to look like anything decent?
I feel I do NOT understand the settings I should set up for capture, working and export- I am just stabbing in the dark here. I guess a problem I have is that while I learn super fast when shown to do something I don't make the connection when reading manuals well. In other words- if it is not a response to an issue I have I cannot tell that it is the answer I seek. I am so despondent.
Ideally I would need to be able to fix the mess as the work I have done is long and hard (I am not really a bad editor- creative but clueless when it comes to setting things up right, it would seem!). Please and many, many thanks.

Thanks for that. It was a horrible blow as he had just been nominated for his first BAFTA and I was so hopeful that he would take me on as an apprentice...
OK- the issue will be one most students creating showreels will encountering as we don't tend to shoot ideal footage, on different cameras we don't "know", and certainly don't have a say about how it is ingested. So it is a case of doing the best we can with what we have.
I ended up dealing with it by using Compressor to "reconform" the footage I was using and to also use a 30%/45% scale-down of each of them and made a multi-clip collage of the material. The "problems" are almost lost in the scaling down, so I am OK with it.
Of course there is still the problem that if I move from the college's Avid system to my home set up of Final Cut Pro I get very annoying issues also with the Avid's exports (QT6) showing up as 5:4 instead of the 16:9 it was exported as!

Toshiba 46G310U turns on for a few seconds the goes black with a horizontal line

I have a Toshiba 46G310U that when it is first plugged up it will come on for a few seconds and show a great beautiful picture, then the screen goes dark with a horizontal line across the screen that eventually fades out too. Turning the TV off and back on does not help, If I leave it unplugged for 5 minutes with the source unplugged also, it will come on when plugged back up for a few minutes at the most then starts the whole turning dark with the horizontal line that fades completely out. I've aready replaced the inverter board, the T-con board, and now I am at a stand still because I can find any help with the problem for starters(Toshiba Tech support was NO help and was unwilling to listen to my problem), second I am thinking possible power supply problem but I am having problems finding the power supply board, the main logic board, and the two small narrow boards that the T-con plugs into above the LCD display. Display has to be good for the picture to be perfect before fading to dark. Back light is also good as I can see it when the display goes dark it still has a glow and with the back of the TV off I can see the actual back light panel shinning. Suggestions? No I won't call tech support back as it was a horrible experience dealing with the rude techs. Thanks in advance.

The tech at Toshiba support was rude and seemed more interested in what was happening in the office then my issue with the TV. I've talked to a local tv service shop and they had no clue about the LCD type of tvs. I just would like to know if it is the main logic/input board or the power supply board. I can find the power board but have had no luck with the main board. Mr.. Moderator if you have any suggestions from Toshiba I would be very appreciative of your help. Thank y

Need to print horizontal line at the end of main window in each page.

Hi,
I am printing a smartform with main window having 10 lines in footer. The problem I am facing is when the content extends upto two or more pages, I am not getting the horizontal line at the base of main window. For last page it is fine as it contains footer.
Please suggest how to proceed.
Thanks,
RKU

Hi,
If you don't have any frame set on your main window:
Go to output options and mark frames, and then go to details and uncheck checkboxes for above, laft and right, leving only below marked.
This will give you a line in the bottom of you main window.
If you dont' want to do this on the main window, can you create a new window placed at the bottom of the page and use this framing technic on that window. But in that case don't forget to mark the "always draw box and shading" checkbox. as this window contains no values, the will not get printed unless you mark this checkbox.
Regards
Åsa Thenstedt

I have a horizontal line across the middle of the ipod screen and the ipod and itunes won't sync. What is the line and is it connected to the no sync.

I have a horizontal line across the middle of the ipod screen and itunes and the ipod won't sync. What is the horizontal line and is it connected to the no sync.

Hey Dean Marvin,
Thanks for the question. These two symptoms are probablyh related. To troubleshoot, let's try resetting your iPod:
How to reset iPod
http://support.apple.com/kb/HT1320
Thanks,
Matt M.

My good story with the 15" horizontal lines

I too received a 15" DL PowerBook with horizontal lines. I didn't record its serial number, but it did begin with W85 (one of the implicated serial batches). I took it back to the Apple Store after owning it for 4 days, spending most of that time researching what's really going on with all this. After using the pic that someone posted here in the forums (thank you!) to prove to the Genius Bar guys that there's a problem, they finally understood - even though Apple is currently "investigating the issue". They ultimately swapped out the machine for a new one.
My new machine has a serial beginning with W85, but it doesn't have the horizontal line issue. I'm incredibly pleased, and I hope this brings some positive vibes to an otherwise bleak story of yet another Apple 1st gen hardware issue.
17 iMac G5 1.8 Ghz, 15" DL PowerBook G4 1.67 GHz. Mac OS X (10.4)

Wow! This is great news. I really had lost hope here, there were too many reports of people just getting bad displays back time after time.
Only problem for me is that I have had the machine for well over a month, and it is BTO with 7200rpm drive...
I'd like to be able to take it to the store, open one up and test before I swap.
Although... I did alert Applecare of the problem a few weeks ago and told them to record my complaint and to contact me if they learn of a fix. I hope this will help. Thing is that it is getting to close to christmas now, and I'll be travelling around with the laptop.... hmmm.
Hey - you know what? I just noticed that my machine also makes these squeaky beeps when I type! What the ****? It only occurs when I am in the middle of this message composition pane - not on the lowest line, and not in the Subject line, and not in Word.
It is really high-pitched and annoying - arrrgh!
I heard someone else talk about this, and I had no idea what they meant. (sorry for this being off topic - but does anyone else hear this? - specific to the Apple Forum message compostion pane.)
It does not come through the speaker/headphone output.

I have a new Photosmart 5510e, on all printed photos I have horizontal lines each 13mm that are show

The horizontal lines are shown mor or less over the whole page, for an A4 it's more than 20 lines. Same results if I scan a picture, on a black background the line is White an on a White background the line is dark. Please help! Mats

With the old iPad connected to your computer's iTunes, are you able to copy them over via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11) so that you can sync them over ? If they are appearing in the Purchased Books collection in iBooks on the new iPad then you should also be able to re-download them directly on it by tapping on them, or via the Purchased tab in the ibookstore in the iBooks apps

The horizontal line of photos....

Similar Messages

Maybe you are looking for