The host not "detected" in SCVMM 2012 fabric

I have a previously joined cluster host - eusaavh0106D and evict the cluster for some troubleshooting reason. Now i rejoin the host eusaavh0106D and eusaavh0106E into cluster and surprisingly the node D is not detected. i have reboot the host,
reboot the SCVMM but problem persists.
I have uninstall the scvmm service from host D and also no helping.
Any idea?

Hi RaymondHS,
Did you follow the following article to remove/add cluster node via VMM :
http://technet.microsoft.com/en-us/library/gg610667.aspx
http://technet.microsoft.com/en-us/library/gg610682.aspx
Re-add the cluster still can't discover that node ?
Best Regards,
Eton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

How to get the vm ip address in scvmm 2012

Hi,
I want to get the vm ip address in scvmm 2012, who can help me?

I have seen lots of people ask this because they can see IP addresses in other Virtualization Consoles, Unfortunately SCVMM doesn't show IP address of the VMs on the console but you can use below script to populate Custom1 property of VMs with IP address
and make Custom1 Column visible (manually) in SCVMM Console... HTH
param ( $VMMServer = 'localhost')
$CustomProp = Get-SCCustomProperty -Name Custom1
$VMs = get-SCVirtualMachine -VMMServer $VMMServer
foreach ($VM in $VMs)
$NetAdp = get-SCVirtualNetworkAdapter -VM $VM.name
if ($NetAdp.IPv4Addresses)
[String[]]$str = $NetAdp.IPv4Addresses
Set-SCCustomPropertyValue -CustomProperty $CustomProp -InputObject $VM -Value "$str"
Disclaimer: The sample script is provided AS IS without warranty of any kind.

Equal logic Storage not Integrating with SCVMM 2012 R2

Hi,
I am using Equal logic 6210 with firmware 7.0. I also installed Hit Kit 4.7 on my SCVMM servers (in High Availability Cluster) and direct access to my ISCSi san subnet.
I am facing issue in adding storage to my SCVMM 2012 R2, after running below commands i am able to see Storage Proivder in SCVMM but no success in adding storage in Array tab of scvmm.
Please guide me , see attached screen shots
Import-Module -Name 'C:\Program Files\EqualLogic\bin\EqlPSTools.dll'
New-EqlGroupAccess -GroupName Group -GroupWKAddress 192.168.1.5 -MgmtWKAddress 10.1.1.5 -UserName grpadmin -Password testpwd
Update-StorageProviderCache
Import-SCStorageProvider
Afzal Munir
<ADMIN NOTE: Phone number removed per privacy policy>

Hi Kevin
I am struggling with the same thing during bare metal installs of Hyper-V hosts. In my case I have managed to narrow it down to the language settings in the oobe pass. If I include them, parsing of the unattend file halts (without an explicit error anywhere)
and the host fails to join the domain. Could you try to leave out the language settings in oobe pass and see if it then completes as expected? Would be interesting to see if it actually is the same issue with a slightly different flavour :)
EDIT: Got a bit further now with the new release of WS2012 R2. All the testing I've done has been with the 05182 build. Stumbled across KB2913316 which stated that a new build (31419) was released december 11th. Allthough the KB does not directly apply to our
issue I thought I'd give it a go, so I went about building a new vhdx-image. Low and behold - the first test went smoothly applying all the settings in the unattend file! I'm going to continue testing to make sure the successful run wasn't just a fluke.

VLAN ID not shown in SCVMM 2012 R2

After upgrading to SCVMM 2012 R2 (from SCVMM 2012 SP1)
The VLAN ID isn't showing anymore, i know its still there because its showing in Hyper-V Manager.
When you change the VLAN ID it does apply the settings (i can verify in Hyper-V manager) but it still does not show it.
Hyper-V Host: Windows 2008 R2
SCVMM Host: Windows 2012 R2
Using the combination SCVMM 2012 R2 and Hyper-V 2012 R2 there is no issue and it shows the VLAN ID.

Hello,
When you're trying to check the network configuration using VMM powershell commands, does it shows the vLan id or not ?
ipmo virtualmachinemanager
Get-SCVirtualMachine -Name <yourvm> | Get-SCVirtualNetworkAdapter
#or
(Get-SCVirtualMachine -Name <yourvm> | Get-SCVirtualNetworkAdapter).VLanID
If so, the issue is only related to the GUI console (I have seen that with some network-related features in RTM of VMMR2, but was working in Powershell).
For those who gets issues with Live-Migrations in R2, can you try to perform the same using powershell ?
ipmo virtualmachinemanager
$VM = Get-SCVirtualMachine -Name <yourVM>
$VMHost = Get-SCVMHost -Name <yourhyperv>
Move-SCVirtualMachine -VM $VM -VMHost $VMHost
Hope this can help as workaround.
Guillaume

Adobe Flash 11.1.102.63 not detected with April 2012 PRU

We have recently updated Adobe Flash to version 11.1.102.63 in our ZENworks 10.3.3 zone. I downloaded and applied the April 2012 PRU and it is still not detecting after an inventory. Is there a fix or easy workaround?
Thanks.

Originally Posted by pcwoodring
We have recently updated Adobe Flash to version 11.1.102.63 in our ZENworks 10.3.3 zone. I downloaded and applied the April 2012 PRU and it is still not detecting after an inventory. Is there a fix or easy workaround?
Thanks.
All - it magically worked during the weekly scheduled inventory run. Perhaps some database updates hadn't taken place yet.

What are the host network requirements for a 2012 R2 failover cluster using fiber channel?

I've seen comments on here regarding how the heartbeat signal isn't really required anymore - is that true? We started using Hyper-V in its infancy and have upgraded gleefully every step of the way. With 2012 R2, we also upgraded from 1gb iSCSI
to 8GB Fiber Channel. Currently, I have three NICs in use on each host. One for "No cluster communication" on it's own VLAN. Another for "Allow cluster network communication on this network" but NOT allowing clients, on
a different VLAN. And lastly the public network which allows cluster comms and clients on it (public VLAN).
Is it still necessary to have all three of these NICs in use? If the heartbeat isn't necessary any more, is there any reason to not have two public IPs and do away with the rest of the network? (two for fault tolerance) Does Live Migration
still use Ethernet if FC is available? I wasn't sure what all has changed with these requirements since Hyper-V first came out.
If it matters, we have 5 servers w/160GB RAM, 8 NICs, dual HBAs connected to redundant FC switches, going to two SANs. We're running around 30 VMs right now.
Can someone share their knowledge with me regarding the proper setup for my environment? Many Thanks!

Hi,
You can setup cluster with a single network but that leaves you with single point of failure on the Networking front, it is still recommended to have a heartbeat network.
Live migration would still happen though Ethernet, it has nothing to do with FC. Don't get confused, you had iSCSI for storage which used one of your VLAN and now you have FC for your storage.
Your hardware specs looks good. You can set up the following networks -
1. Public Network - Team two or more NICs (based on bandwidth aggregation)
2. Heartbeat Network - Don't use teamed Adaptor
3. Live Migration - Team two or more NICs (based on bandwidth aggregation)
Plan properly and draw guidelines to visualize and to remove single point of failure at all points.
Feel free to ask if you have some more queries.
Regards
Prabhash

Can't able to add update server to fabric in SCVMM 2012 R2

Hi,
I have one windows server 2012 R2 standard machine (update server) with WSUS, I have installed from server manager as server role. This update server machine is having the public IP without domain and it is a VM on one of my Hyper-V server. I would like
to add the update server to my SCVMM 2012 R2 environment. When I try to add the update server to the fabric, it can't seems to be add because its throwing the error like, "Error (410) Agent installation failed on update server. The RPC
server is unavailable."
Has anybody else have clue ?
Can anybody offer some help ?

Hi,
following link provides info on how to add untrusted Hyper-V hosts to VMM
http://technet.microsoft.com/en-us/library/gg610609.aspx
as it might help you adding an untrusted WSUS also (haven't tested it myself)
MCITP SA - MCP Active Directory - MCP Infrastructure - MCP Server Virtualization www.it101.eu

Server 2012 R2: How do I set VLAN data for the Host Virtual Switch (via PowerShell)?

I need to modify the Host (NOT the VM's) VMSwitch VLAN settings via Powershell for automation purposes.
In Server 2012 (NOT R2), this can be done via modifying
MSVM_VLANEndPointSettingData
However, it seems in Server 2012 R2, that class is gone. I've manually searched through the MSVM classes, and it seems that the Host VMSWitch VLAN settings are stored
in MSVM_EthernetSwitchPortVlanSettingData. Unfortunately, I have no way of tying that class to a specific VMSwitch.
Any know how to do this on Server 2012 R2?

Hi,
I found some similar issue with your case, however this forum is not focus on the develop related issue,
Therefore I suggest you more about the develop question please post to the MSDN forum.
The related information:
Problem with CPU load and WMI errors when Hyper-V is installed?
http://social.technet.microsoft.com/Forums/windows/en-US/4eca1f42-8630-48b4-85fa-e9569445d832/problem-with-cpu-load-and-wmi-errors-when-hyperv-is-installed
The third party solution:
How to: Fix error 0x80041010 on Windows 8.1 + Hyper-V
http://www.seankilleen.com/2013/11/how-to-fix-error-0x80041010-on-windows.html
MSDN forum Developer Network
http://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesVirtualNetwork&filter=alltypes&sort=lastpostdesc
Thanks for your understanding and support.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Deploy VMs with SCVMM 2012 R2 with Internet connection

Hello everyone,
I am trying to use SCVMM 2012 R2 to create a network that will eventually hold 2 clouds, but for the moment I can't seem to create the network and connect the VMs to the Internet.
My lab is this (all hosts are in a LAN, 192.168.0.0/24, gateway 192.168.0.1, and ONLY ONE NIC per HOST ):
1 host DC, DNS, SQL, SCVMM 2012 R2 (IP 192.168.0.8)
2 hosts with Hyper-V (IP 192.168.0.9 and 192.168.0.10)
I'm also planning to create some "virtual" networks for clustering and live migration, which will use the same physical NICs as the management network (since I have only one physical NIC per host).
Could you please give me a quick guide of how to set this up with SCVMM 2012 R2, so that I can take advantage of the new features (network virtualization, logical networks, logical switch) and for the VMs to be able to reach the Internet?!
Thank you so much.

Thanks for the reply.
My network architecture is exactly like the one described on your paper, with 2 differences:
1. I only have one host in the Production group and one host in the Gateway group
2. The first host has one physical NIC, the second host has 2 NICs, one internal and one with an Internet (routable) IP
After applying the logical switches on the hosts, I lost Internet connectivity on the gateway host (I have no idea why there is no logical Gateway Switch !!!). VMM completed the jobs with no error.
Any thoughts?

Agent not installing correctly and host not appearing in console

Hi,
I encounter troubles with agents on some servers running Red Hat Enterprise Linux ES release 4 (Nahant Update 5).
*1)* The install script doesn't run correctly. It hangs after some times
install.log :
11-21-2007 17:37:05> check rpm with rpm -q rpm
11-21-2007 17:37:05> Checking if user is root
11-21-2007 17:37:05> Checking UCE upgrade
11-21-2007 17:37:05> rpm -q sun-uce-agent
11-21-2007 17:37:05> CMD: rpm -q director-agent
11-21-2007 17:37:05> checking /opt/local/uce/agent//bin/.uce.rc
11-21-2007 17:37:05> /opt/local/uce/agent//bin/.uce.rc was not found
If I install the rpm manually, the packages is successfully installed. I then just copy the .uce.rc file at the correct location.
*2)* On those servers when the agent it running, it fails to connect to the SDS with this error in the error.log :
29739:2007-11-21_17:01:13 ERROR [ default_logger: source_unavailable: #0 ] 17236224 Failed to initialize application. Check that you entered passwords and keys correctly.
Any idea of what could be done ?
Best regards,
Fred. Oger

Hi,
Still don't know why the agent installer doesn't work correctly, but I found the reason of the host not appearing in console :
The uce.public file had to be installed in /opt/local:uce/agent/bin

IBook Not Detecting Internal Hard Drive

So, this morning my computer started acting slowly, and apps started freezing. I restarted, and to my horror found that it wouldn't boot. It starts, and the screen is gray, but then nothing happens. I have discovered that the problem must be the iBook not detecting the hard drive. I booted into a linux live CD, and found that it could access the HD. Then when I turned my comp off, and went into select boot drive mode by holding option on startup, I found that no hard drives were listed to boot from. I have also tried connecting to my computer via firewire from another computer, and that couldn't detect it either. What is the problem here? I am becoming very nervous all my work is on there. Thanks for the help.

Try booting from the Apple Restore disk and run the Apple Hardware Test that is on that disk. I fear that it may confirm a failure of your hard drive, but you never know until you try.

Intermittent "Camera not Detected" with D90 and Windows 7

I just installed and set up LIghtroom 4 on a Windows7 PC. We are having intermittent problems shooting tethered with a Nikon D90. We have successfully been able to tether the D90 to and capture images in Lightroom. But now we are frequently receiving the "Camera not Detected" indicator in the tethered capture window.
It seems that Windows 7 is taking control of the camera away from Lightroom. Is that possible? Is there some setting in Lightroom to override Windows?

it has to be plugged into the machine before you power on the machine, it is not hot swapable like on OSX
does the screen work in OSX

EAX console woes: did not detect required components/audigy2 not detec

After a recent reformat, I go to install the EAX console after the latest drivers (don't have my original CD by the way) aaaand get the "did not detect required components" message.
So I search on it and it doesn't have anything to do with my dri've paths and such. I've tried an Audigy2 and Audigy2 value ISO, but they tell me they don't detect an audigy2... dxdiag tells me differently, however. I'm not in the mood for downloading a bunch more 400 mb ISOs to test them all out either..
I'm at a loss here and really need the EAX console... autoupdate detects my card as "Sound Blaster Audigy 2, DR release .88.20"

nanite2000 wrote:
superidan wrote:
I have retail Audigy 2 card. tryed removing the card and installing on a differant slot. Nothing Works! it produces the same "no audigy 2 card found - setuip will now exit" Creative sould be ashamed thanks
Yes, Creative should be ashamed.
This is a known problem that has been around for months and they have failed to address, just like many other problems with their soundcards. For the solution to this particular problem, look here:
http://forums.creative.com/creativel....id=3964#M3964
If you would reread my original post in this thread, that solution did not work for this particular problem of mine. I have a SoundBlaster Li've! Card that this solution worked for, however it does not work of the Audigy 2 card?unzipping the files with WinRar and then running the Setup.exe files produces the same result?setup does not recognize the required components and will close.
I?m not saying that the person who you quoted should not try it though.

MSI B85M-G43 could not detect Gigabyte R929OC 4GB 3X Windforce

I recently build a new PC a month ago and have been using it for 3 weeks then random black screens problem started to occur.
It started right around the time after I updated to catalyst 14.4 w/o the beta. At the same time i noticed windows update has updated some files which i did not note down what it was. Also Noticed that startup list had some new programs running.
I proceeded to disable the programs in startup, undo the latest windows update and finally reinstalled windows 8.1
Nothin works and I am left with black screen, which i realised that to be actually the mobo not detecting the card once i got a vga screen plugged in to mobo onboard graphics and went to BIOs to see.
Previously my BIOs were updated to latest through the liveupdate 5 program, which itself updated to liveupdate 6. For some reason I dont like programmes sitting at the back constantly checking for updates, so after updating those, I deleted all those programs. The updates also took forever to download, I figured i will download/install individually in future. Now that I do a search there is no live update 6?
Just to make sure, I have reflashed the BIOs to E7823IMS v3.6 again through the m-flash inside BIOs, but did not choose the BIOs + ME option as i dont know what it is. After reboot, BIOs version remained there, checked for ME and there's the version number 9.0.21.1462.
BIOs version: E7823IMS v3.6
ME version: 9.0.21.1462
Prior to the Win8.1 reinstall, my OS was sitting on my SSD in non UEFI mode, I chose to install in non-uefi as i dont know what it was then. When i tried to reinstall, somehow the boot priority identified the SSD as UEFI first, so i wanted to give it a try and proceeded to install win8.1 in UEFI until reboot failed. Then I decided to installed my win8.1 on my HD in non UEFI instead. The system, as usual, works using the integrated graphics and mobo could not detect the graphics card in the only PCIe 3.0 x16 slot. Should I plug it into the PCIe 2.0 x16 slot and try, It never occur to me until now as I thought that was the only slot my graphics card could use.
Please help
Here are my specs:
MSI B85M-G43
Intel i7-4770 3.4GHz
G.Skill Ripjaw 1600MHz (2 x 8)MB Blue
SSD Samsung Evolution 240GB
WD 1TB Blue
Gigabyte R929OC 4GB 3X Windforce
LG 24x DVD Writer
Corsair Carbide Air 540 Case
SeaSonic G-750 80+ GOLD Power Supply
ASUS PCE-N53 PCI-E Adapter
Windows 8.1 OEM
Qnix QX2710 Evolution II 27" matte PLS monitor (uses dual-DVI-D connector only)

try to update your bios again but use the BIOS + ME option as it will flash not only your bios but Intel ME at the same time.
Note: Don't remove your USB during bios flash as the system will restart for I think around 2 times and plugging out USB might kill the MB bios.
Did you modify any settings in the bios setup??
If updating bios not can't work, try to plug your card to second PCIE slot and see if it could boot or not.

LELA "Router Not Detected"

I just purchased a Linksys WRT54G V8.2 router. I just opened the box and have been attempting to get the wireless network setup.
I am currently posting as I am connected via eathernet cable though the WRT54G router
My problem is when I attempt to set this up using the LELA, I keep getting the "Router Not Detected" error. Everything is plugged in, all lighs are on. As I said, I am currently connected to the internet using this router, but with a wired ethernet cable, I cannot get the wireless setup.
LELA will not let me do anything until it can detect the router, can anyone help me figure out what is wrong here?
Thanks.

I'm having the same issue.
My router works fine and I can log into it from a web page but each time I try to install Lela, it will not detect the router (even though all of the required lights are on/blinking, etc).
I have uninstalled Lela, rebooted, and cleared out the Registry.
I have tried multiple router resets and have also updated the firmware.

The host not "detected" in SCVMM 2012 fabric

Similar Messages

Maybe you are looking for