The housing of my pc
Dear Sirs
The technical told me the problem is the housing of my pc. So, I need a HP ENVY Touchsmart 17-j04 laptop housing, please. The housing is under the warranty?
Thanks a lot and Best regards
Edvaldo
Hi @Vadoalmeida ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that a technician told you that there is a problem with the housing on your notebook. If it is under warranty, I suggest contacting HP support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
For your convenience I am also including the HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY TouchSmart 17 Notebook PC Maintenan...
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Similar Messages
-
Multiple users, devices & Apple IDs in the house. Can we, and how would we, use Home Sharing?
We have three users in the house, each with their own Apple ID, using multiple mac/PC devices. Can we and how would we use Home Sharing to share music, apps, etc?
Do you have a computer. You can't share music or apps from one mobile device to another. To share photos you need to use photo stream shared albums.
-
HP Officejet Pro 8600a all of a sudden is not recognized by only my computer in the house
Hi, I have 4 laptops in my house. We have all been connected wirelessly to my HP printer for over a year. All of a sudden, for some reason, my computer no longer sees the printer. I have an ASUS. I run Windows 7 with Windows Firewall. My router is a 3 month old Linksys EA3500. I can print from every other printer in the house, and I can also print from my Android Phone. However, when I try to print from my laptop, it now says that it is detecting printer has been turned off. I have done everything I can think of to fix this. The only changes I recently made were installing Webroot AV program. I can't be 100% certain, but i'm pretty sure I have printed since that installation, and all of the other computers on my network are using Webroot as well with no issues. Hoping for some help. Here's what I've done so far:
Tried troubleshooting printer via computer. It's gone through the spool service check and whatever else the standard troubleshooting does. It said something about my printer being turned off. It definitely was not, but I unplugged and restarted just to be sure. No fix.
Noticed IP changed on printer and thought maybe something with static vs dynamic (don't know much about this) so went to "update IP address" on my laptop and updated the info. Checked the router settings info by entering printer's ip in browser. Printer shows connected and ready and all looks good. I pinged the ip and got results. Mac filtering is not enabled so I don't need to deal with that. SSID is not hidden. The 802.11 configuration says that the network type is WPA-PSK with WPA2 and AES selected for encryption. Same as it always has been.
Double checked to make sure printer was recognizable by my firewall. It is on the accepted list.
Last resort: I uninstalled the printer software and deleted the device from my laptop. Attempted reinstall, but when it gets to the part where it's supposed to search for the printer it says unable to find. I enter the IP address from the printer and it still cannot find. I enter the host name and it still can't find. Since I uninstalled everything, I can no longer install the printer at all.
Went to drivers on line and tried using the install via online option. same results. "unable to find printer".
I unpugged the printer from the wall again, this time for over an hour, hoping it would reset but realizing this probabaly isn't the issue since every other laptop can print in my house.
Tried to connect ethernet cable and install printer that way. Plugged one end into router and other into printer as directed on troubleshooting tips. Ran Disk software and it doesn't install the printer. IP address changes on printer when I use ethernet and I am entering new ip accordingly.
Reset my modem and restarted. Reinitialized my router and then used the software to reconfigure it. did the standard 'wait ten seconds and plug everything back in and reboot computer'. No fix.
Checked my wireless network adapter setting to make sure I have most updated drivers. I do.
Deleted every single thing that relates to my printer in every folder and in regedit.
Tried reinstalling printer both wirelessly and with ethernet. Still unable to find printer either way.
I have changed no settings that I can think of since the printer last worked a few weeks ago. As I said, every other computer prints perfectly. The only thing I can think that's different is that all the oher laptops are running Windows 8 and I'm still on 7, but that didn't matter before, and I can print from the HP print software on my phone.
Please somebody tell me what I'm missing here. I'm going bonkers. Thank you so much to everyone who takes the time to reply on this support forum.
This question was solved.
View Solution.Well you have done quite a bit. Let's try here if you haven't.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915280&tmp_task=solveCategory&cc=us&dlc=en&lc...
Then let's give this a shot.
These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
Assistant, Printer Home Page (EWS).
3. If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
4. If needed and you assigned a static IP address, try using 8.8.8.8 for the Manual DNS server and
8.8.4.4 preferred DNS server.
In the router: (Refer to your router manual for information)
5. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
6. Set router to 20Mhz only, or 145Mbps depending on router.
7. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
8. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
system now and helps with wireless connectivity (if you want to know why, search the web).
9. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
they must be different for all bands, even for any Guest networks.
10. SSID broadcast must be enabled.
11. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
12. Power on printer and verify it reconnects to router.
Windows 7/8/8.1 Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?
@whimsei,
Hello and thank you for posting back. What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
To fix this it would have to be opened up and the connections checked. If there is an issue with the cable then it would have to be replaced. This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
Here is the link to the maintenance and service guide. If you feel comfortable doing the work it will help you.
HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
Maintenance and Service Guide
If you want to send it in for repair here is how.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
I just installed Firefox on a new laptop. Google is my home page. My opening tab is always Google. But, when I open a New Tab, it doesn't open in Google. So, I've always clicked on the house icon to take me straight to Google. Now when I do, TWO tabs open in Google. (it duplicates)
I tried all of the above, I've reinstalled Firefox and I've checked if value set to 3 in browser.link.open_newwindow which it is, but the problem still happens.
Regarding what you say re what is written in the article Tab preferences and settings, I understand what this means. However I am using FireFox in my work. I have a CRM where I constantly click on a button that automatically opens my order system on a new tab, or email templates in a new tab etc. The tab opens next to the tab I am currently on. However ever since I was prompted to Refresh Firefox earlier, it now opens these in a new window. Therefore the size of these pages has nothing to do with it, as this was not a problem before.
This is irritating, as no I have to go from one window to another, and where I have multiple tabs open it is making my life difficult.
Not happy! -
My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.
That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
Thank you for your replys -
We have another iPhone 4 in the house and it reconnects to the wifi just fine. The kindle, the laptop, the Xbox all reconnect fine. However, for some reason, my iPhone 4S makes me type in the wifi password multiple times a day. It will connect and works fine while connected. However, if I let it go to sleep, when I unlock the screen my wifi is "not connected". I have to deselect the router and retype the password. If something is using wifi like I heart radio or pandora or an update is downloading, it won't switch off the wifi, but in any other circumstance if the screen locks up and goes to sleep, when I unlock it I will need to reselect my network and retype the password. I have been dealing with this for months and have googled several times for a solution with no success. I'm pretty sure that when I was first setting up the wifi, I changed some setting on either the phone or the
router, but of course I can't figure out what I might have done. Please help!I read the article thanks. I tried the settings-general-reset-reset network settings-reboot system-go to wifi settings-select wireless connection-select the ">"-symbol-select auto for http proxy. I was optimistic about that because I thought I changed some setting somehow to cause this problem, but it didn't work. More specifically, I did connect successfully and browsed the Internet for a good while, but then I put down the phone for a minute, the phone went into sleep/power save mode, and when I picked it back up a moment later it was no longer connected. Dang. Had to select the connection and use my password yet again.
Another valuable bit of info for you. The only network with which I have this problem is my home. I use all kinds of devices at home and no other devices have this problem. Also, I use this iPhone all over with various wifi networks at hotels and starbucks and family's homes with no issues whatsoever. It remembers and automatically reconnects with every wireless network except the one in my own house. -
My iPad has to be really really close to the router for it to have internet. How can I make it so I can go around the house with it? My iPad has been like this for a couple of months, and it has really irritated me. My friend came over and he had to download iTunes for something on the computer. He needed my iPad, he tried it and it wasn't really near the router.
I'd begin by reviewing the following:
http://support.apple.com/kb/TS1398 -
We have two ipads in the house and sync on one computer. How do we switch between apple id s
We have two ipads in the house with separate apple IDs. How do we switch between these on the only laptop in the house
On your iPad go to Settings>iTunes & App Store
Tap on the Apple ID shown and select log out.
Regards,
Steve -
We have three computers in the house (iMac, MacAir and the new MacAir I just received) in addition to 2 iPhones and 2 iPads. 2 Macbook Pros are no longer in use (both crashed before home sharing could be deauthorized) but now I have reached my maximum device allowance (5), even though only 2 computers are currently active. How can I reset the authorized computer numbers?
You can de-authorize individual computers, but only by using those computers. Otherwise you can "deauthorize all" from your iTunes account.
Open iTunes on a computer
From the Store menu, select "View my Account..."
Sign in with your Apple ID and password.
Under "Computer Authorizations" select "Deauthorize All".
Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "deauthorize all" your authorized computers, authorize each one as required. -
Is there a way I can send what I'm watching on my Mac to a TV in the house Note I do have ITV
is there a way I can send what I'm watching on my Mac to a TV in the house Note I do have ATV
Yes, if the Apple TV is located where it can receive a strong wireless signal from your wireless router. You will still need to connect from the Apple TV to the TV using an HDMI cable. Not possible to send the signal via wireless directly to your TV.
-
How do I set up my Time Machine and Mac Mini with Lion Server so i have one wifi loop in the house?
HELP!
So I have had a Time Machine wifi loop at the house for approx. 6 years. I run two Macbooks, 2 iPhones, 2 iTouch and a Samsung Smart Blueray on the loop.
I just bought a Mac Mini with Lion Server. When setting it up I'm not sure what or how I managed to do, but I now have 2 wifi loops, one doesn't lock and niether will support the Samsung BlueRay. Also, each time I want to go online with one of the other Mac devices i have to relog into the wifi loop.
Can someone please walk me through the fix. The mac Mini is plugged straight into the Time Machine to recevie its internet connection.
Thanks!
JohnYou often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
(Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
Then set DHCP for clients that will join.. this can then expand the scope of addresses..
It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it. -
The signal has been strong and effective previously and as far as i'm aware that nothing else in the house has changed. We have two apple computers, appletv, an ipad, 2 iphones, time capsule, and airport all running off the same network. If there is product, a configuration or program we can get to help diagnose and or solve any connectivity issue that would be awesome
The Powerline adapters mentioned by edex67 are your only hope if you cannot run an Ethernet cable.
Even if the home and office are on the same electrical circuit, you won't really know how well the Powerline adapters might work until you actually try them out at your location.
For that reason, it would be a good idea to understand the store's return policy before you buy. -
I can't deauthorise my daughter's last computer from iTunes because it has crashed. We have three computers in the house but I can't authorise my new MacbookPro for iTunes or homesharing because it says I have 5 computers authorised (I don't). I can't even get my music from the iTunes library on my old Macbook onto my new one, because it won't let me sync my iPhone 5 with my old Macbook, as I can't update the iTunes software. So I have a new MacbookPro and a new iPhone 5 and I can't get any of my music on either of them. I feel singularly depressed.
As you have more than 1 computer authorised then you should be able to log into your account on your computer's iTunes (Store > View My Account) and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.
-
I have one modem in the house but I need 2 different networks.
I have one modem in the house but I need 2 different networks that will not communicate or even see each other. The first network is the one that needs to be the most secure. The computers are used for personal information, documents, pictures, Apple TV and iTunes home sharing.(3 Apples, 3 iPads, 3 iPhones and 4 Apple TVs) The second network needs to be for the 3 computers and gaming systems used for social games on Facebook, PSP, XBox, and a gaming system used for World of Warcraft. The social interactions seem to be the ones that have picked up most of our computer network issues and I would like to be able to isolate them from any communication with our home network (2 PCs and 1 Mac). Is there a way that I can use 2 different routers along with blocking any bluetooth and/or bonjour connections? I am not worried about a networked printer for the second network, it is more to try and contain any issues that may slip though virus protection and create a mess with our home systems. It would be nice to still be able to set up a Guest Network for the herds of kids and adults to use when visiting as well. PLEASE tell me this can be done.
Thank You
ChristineChristine,
Apple may be able to do some, but not all of what you want to do.
The dual band AirPort Extreme can create a main, or "private" network and a separate "guest" network. The private network can be configured to handle both wired and wireless clients. The "guest" network works only for wireless clients.
Computers, devices, etc on the "guest" network cannot "see" or communicate with any of the devices on the main or "private" network. But, it is possible to allow clients on the "guest" network to see other devices on the "guest" network, so a wireless printer on this network would allow anyone on the "guest" network to be able to use the printer if you need that functionality.
You can "extend" the "main" network using more wireless devices if you need more wireless coverage. The "guest" network cannot be extended.
Depending on the level of service you have with your ISP, you may have bandwidth issues with two networks and multiple devices all trying to use the Internet connection. I would think that a 25-30 Mbps connection would be the bare minimum to handle what you want to do and 50 Mbps would be advised.
If you want to use two separate routers, you are really looking at a commercial type installation best handled by commercial products like Cisco, so that might be the place to look. -
I have deleted my photos but have icloud. when i log into icloud it doesnt give me an option to view these photos at all. my photo stream is only showing photos from another iphone in the house. i am unsure if i do a restore from back up if this will work. i really dont want to lose these photos but i am very unsure of what to do to resolve. can anyone please help?
thank youIf you had Photo Stream enabled with your iCloud account settings on the iPhone, photos in the Camera Roll should have been transferred to your photo steam automatically when the iPhone was connected to an available wi-fi network.
Your photo stream is not available when logging in with your iCloud account with a browser on a computer.
Why were the photos in the Camera Roll deleted?
Photos/videos in the camera roll are included with your iPhones backup. If your iPhone's backup has not been updated since the photos were deleted from the camera roll, you can try restoring your iPhone from the backup.
Maybe you are looking for
-
The mail app on my asha 201 doesnt work,how can i resolve it,coz wen i open it,it says conflicting apps Moderator's note: We provided a more topic-related subject as the post was moved to the appropriate board.
-
I'm looking for a report that shows, by payment run, what discounts were taken and/or missed. Does anyone know an existing report or query that will provide this?
-
From the research i've done, it seems that there are two ways to access CLOBs in Oracle 8i: InputStream or Reader. The InputStream method uses byte streams and the Reader uses character streams. Is that correct? I haven't been able to determine the p
-
Hi guys, I'm loading some data from a database into a string. No problems until yesterday, when it seems to stop at a certain point. There IS more data in the DB than is being displayed, it just gets so far and stops. The size of the DB has been incr
-
Alert Monitoring and Notification Mails
I have a requirement to configure CCMS in XI system in such a way that the alerts trigger mails to the outlook users. This is required in J2EE engine also. Please tell the T-Codes and Steps. Thanks