The https URL hostname does not match the Common Name (CN) on the server.

Hi,
I am getting the following error while trying to use https with our self-signed certificates.
javax.xml.ws.soap.SOAPFaultException: Marshalling Error: The https URL hostname does not match the Common Name (CN) on the server certificate. To disable this check (NOT recommended for production) set the CXF client TLS configuration property "disableCNCheck" to true.
The above error is the error I get, when I try to use the Web Services using https.
I have added the following lines in cxf.xml but it still doesn't seem to work correctly.
<http-conf:conduit name="*.http-conduit">
<!-- deactivate HTTPS url hostname verification (localhost, etc)
WARNING ! disableCNcheck=true should NOT be used in production -->
<http-conf:tlsClientParameters disableCNCheck="true" />
Kindly let me know on what would be the issue here?.

I had P2V'd a SQL 2008 server and was having this issue.  I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM.  After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from.  Finally it hit me, maybe it's stored in the master or msdb datatbases.  
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine.  All services started
OK on the virtual machine now and affinity was set the way I needed it.

Similar Messages

  • How to map a url that does not match with the context root  ?

    does weblogic support url that does not match the context root ?
    ex. the context root is AAA. the welcome page can be
    retrieved using http://localhost:7001/AAA
    Can it be configured to use http://localhost:7001/BBB to bring up the index.html in context root AAA ? if so, how ?

    I agree with Imp68.
    It still amazes me that in 2014 so many web sites are still not standards-compliant and instead insist on sniffing for the user-agent.  And, in the majority of cases, I've found that the websites work fine with any modern browser.
    phardell,
    To be clear, Safari is not the problem, the website is!  The developer of this website is still living in the 1990s and needs to move forward with the times.  Imp68's suggestion will cause Safari to "pretend" to be whatever browser you wish.  Try choosing "Safari 7" if that worked for you in the past and the website will likely go back to working.  If that does not work then try choosing "Internet Explorer 10" from the menu and see if that works.
    No matter what the result, you should look at the bottom of the page for a link to report problems with the website.  Submit a comment that tells them that they need to "modernize your website to support all modern web browsers".
    Good luck.

  • The SYSVAL table entry for the database version (16) does not match the required version

    We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers.  I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31.  I get the error below.  Note, SQL went from 2005 to 2012 during this upgrade.  Do I need to change a value in this table to reflect the SQL change?
    [04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
    [04/29 12:47:14:198]:Java version: 1.8.0
    [04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
    [04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
    [04/29 12:47:14:198]:----------------------------------------------------------------------------
    [04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
    [04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
    [04/29 12:47:14:198]:Maximum number of log files = 100
    [04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
    [04/29 12:47:14:198]:LogManager: setting default log
    [04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
    [04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
    [04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
    [04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
    [04/29 12:47:20:282]:
    [04/29 12:47:20:282]:
    [04/29 12:47:20:282]:Shutting down the application

    I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
    As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

  • The Dreamweaver client version does not match this version of the BrowserLab client

    Cannot use BrowserLab
    I have followed the upgrade instructions on this page
    http://labs.adobe.com/downloads/browserlab.html
    Deleted the MeerMeerDW folder, downloaded and installed the latest MXP files.
    But when I try to use BrowserLab from Dreamweaver after program loads error message says
    "The Dreamweaver client version does not match this version of the BrowserLab client.
    Please download and install the latest version of the Dreamweaver MXPs"
    I have tried several times, even tried removing the extensions from Extension Manager, quiting the program,
    deleting the MeerMeerDW folder, restarting Extension Manager and reinstalling the MXPs, then starting Dreamweaver
    and trying the Preview in Browser>Adobe BrowserLab. Same problem, program loads and then get error message.
    Macintosh OS 10.5.8
    Dreamweaver CS4
    Extension Manager CS4 (2.1.115)

    Hello toni7,
    I'm sorry to hear you're having problems. Are you prompted to replace the existing extensions when performing the installation? The error message you are receiving when using the service is expected if the new versions of the extensions are not installed.
    What is the version number of the extensions displayed in Extension Manager?
    Are you deleting the MeerMeerDW folder in the user library prior to installing the new version of the extensions? And just to be sure, are you logged in as the same user? [(user)\Library\Application Support\Adobe\CS4ServiceManager\extensions\MeerMeerDW]
    Do you have more than one MeerMeerDW folder at the path above?
    Also, be sure that all adobe applications are closed before trying to install the new extensions. I would also make sure that CS4ServiceManager, Extension Manager and Dreamweaver are not running when you delete the MeerMeerDW folder and prior to installing the updated extensions. Go to Applications\Utilities\Activity Monitor and Quit Process on any of those three running prior to installing.
    It's critical that the MeerMeerDW folder is manually deleted, rather than removed using Extension Manager before updating the extensions.
    Best regards,
    Corey

  • The product key entered does not match any of the Windows images available for installation. Enter a different product key.

    how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

    That's a really helpful answer and not smug at all, thanks Carey.
    I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
    Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
    a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
    Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
    edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
    http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

  • The version of SOS does not match the version of CLR you are debugging.

    I have a 32 bit crash dump file that I have loaded with WinDbg X86 (I'm running on Win7 63 bit).
    When I open the crash dump file I do the following:
    .loadby sos clr
    then when I try to run any other command I get the following error:
    The version of SOS does not match the version of CLR you are debugging.  Please
    load the matching version of SOS for the version of CLR you are debugging.
    CLR Version: 4.0.30319.269
    SOS Version: 4.0.30319.296
    How do I load another version of the SOS dll? and
    How do I find out what version of SOS I need to load?
    Thanks

    I see that there is another version of sos.dll located in:
    C:\Windows\Microsoft.NET\Framework\v2.0.50727.
    So I have tried to add this path in File-->Symbol File Path like so:
    srv*c:\symcache*http://msdl.microsoft.com/download/symbols;C:\Windows\Microsoft.NET\Framework\v2.0.50727
    It doesnt seem to make any difference.
    When I type !chain I dont see this path output.

  • HT3702 When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times.

    When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

    When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

  • The affinity mask specified does not match the CPU mask on this system.

    We are having a problem with one of our SQL servers, and in comparing it to the backup server which is working fine, I noticed some differences. I attempted to correct the differences, but no luck.
    The dell server has 4 dual-core processors and at one point hyper-threading was enabled. One of our DBAs recommended that it be turned off. We didn't have any major problems until recently and it seems that getting this setting right is the lynchpin. Any suggestions?
    John
    EXEC sys.sp_configure N'show advanced options', N'1' RECONFIGURE WITH OVERRIDE
    GO
    EXEC sys.sp_configure N'affinity mask', N'0'
    GO
    EXEC sys.sp_configure N'affinity I/O mask', N'0'
    GO
    RECONFIGURE WITH OVERRIDE
    GO
    EXEC sys.sp_configure N'show advanced options', N'0' RECONFIGURE WITH OVERRIDE
    GO
    Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
    Msg 5832, Level 16, State 1, Line 1
    The affinity mask specified does not match the CPU mask on this system.
    Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
    The configuration option 'affinity mask' does not exist, or it may be an advanced option.
    Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
    The configuration option 'affinity I/O mask' does not exist, or it may be an advanced option.
    Msg 5832, Level 16, State 1, Line 1
    The affinity mask specified does not match the CPU mask on this system.
    Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
    Msg 5832, Level 16, State 1, Line 1
    The affinity mask specified does not match the CPU mask on this system.

    I had P2V'd a SQL 2008 server and was having this issue.  I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
    Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM.  After searching
    for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from.  Finally it hit me, maybe it's stored in the master or msdb datatbases.  
    SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine.  All services started
    OK on the virtual machine now and affinity was set the way I needed it.

  • The authentication information provided does not match our records. Please verify your personal information and try again.

    i keep getting this error when i try to change my password.
    the authentication information provided does not match our records. please verify your personal information and try again.

    I have totally forgotten the answers to "security" questions.  Please help - I am 84 years old and somewhat lacking recall intelligence about what I might have declared earlier.
    <Personal Information Edited by Host>

  • The file may be corrupt. The file header checksum does not match the computed checksum.

    I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.

    Hi ballen6721,
    Thank you for the post.
    This issue can occur if the newly installed hardware device is incompatible with the system.
    Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
    Method 1 Device Clean Boot
    ============================================
    Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
    Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
    ============================================
    1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
    2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. Click Repair your computer.
    5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
    6. At the System Recovery Options Dialog Box, click on Repair your computer.
    7. Click the operating system that you want to repair, and then click Next.
    8. In the System Recovery Options dialog box, click Startup Repair.
    Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
    1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
    2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. Click Repair your computer.
    5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
    6. At the System Recovery Options Dialog Box, click on System Restore.
    7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
    8. Click Finish to restore the system.
    Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
    Can we start the computer now?
    If the issue persists, please help confirm the following points:
    1. What hardware changes have you made recently?
    2. Can we enter Safe Mode now?
    I look forward to hearing from you.
    Best regards,
    Tim Quan
    Microsoft Online Community Support

  • "the file header checksum does not match the computer checksum." Pavilion P6000

    HP Pavilion P6000
    Windows 7 64-bit
    The file is possible corrupt.  The file header checksum does not match the computer checksum
    I was previously getting blue screens saying things like "Memory_Management"

    I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
    You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
    Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
    Please report results.
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Annoying 'Could not use the history eraser because the current canvas size does not match that of the history state' message

    Does anyone know if it is possible to get rid of the message 'Could not use the history eraser because the current canvas size does not match that of the history state'?. It comes up if I hit the alt/option key while I have the eraser selected. Something I do by accident all the time.

    The way you've described it, one gets the distinct impression you do not have a clue as to what the history brush does and how to use it.
    You need to read up on it.  Read the Help files and google for tutorials.
    First you need to create an image (with actual pixels in it), edit it as desired, then make a snapshot of the edited image, then target the snapshot with the history brush tool, then go back in the History panel to the step before your edits and selectively paint your edits in with the History Brush.

  • The report MC+E does not match with F.01

    Dear Friends,
    The report MC+E does not match with F.01 and moreover it does not indicate the domestic sales.It only captures export sales.
    Will you please tell me why it is happenning?
    Thank you.
    Sadanand.

    Mohammed, are you able to create a brand new report using this same database source.
    If that works then you know you have the proper drivers for the ODBC connection.  Another
    way to test this is to use Excel, create a database connection in Excel, to the ODBC table,
    and see if you can pull data.  You may need to update your ODBC drivers.  If you are able
    to pull data in your new report, try adding the other database to it, and see if the error returns.
    I am on CR XI, so, I can't be much more help.

  • I want to upload a Banner to my iTunes U page. The banner file has all the requirements like as, kind, size, frame, and etc. Infortunately,  I could not upload the file. It does not show in Provider Page Configuration or the preview.   Someone could help

    I want to upload a Banner to my iTunes U page.
    The banner file has all the requirements like as, kind, size, frame, and etc.
    Infortunately,  I could not upload the file. It does not show in Provider Page Configuration or the preview.
    Someone could help me?

    Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

  • Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Thank you for your response.
    I had rebooted the router (several times, actually), to no avail.
    I do not know the answer to whether MAC filtering is enabled on the router.  Have tried to find info about that, but unsuccessfully.  Router is an Arris TG852G, supplied by Comcast.  I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist.  To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages.  He was unable to connect my iPhone, however, after trying for some time.
    I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g".  The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
    By the way, my iPhone does connect wirelessly to my network at home.  This difficulty is at a second home.
    Any other thoughts would be appreciated.

Maybe you are looking for