The Ideal System?

hello,
i compose very complex compositions in Logic 9 for film using tons of tracks and third party plug-ins.
at times my system freezes or crashes so i wonder if anyone has advice on what ways i could upgrade my system to be able to handle these intense projects better. is more RAM the key?
this is what im currently working with:
2x3 GHz Dual-Core Intel Xeon
6 GB 667 Mhz DDR2 FB-DIMM
OSX 10.6
if anyone has advice and time to comment it would be great to gain more insight.
thanks!!
Luke.

More Ram enables you to load more (sample-based) VIs into Logic. As the sample headers are kept in RAM when streaming from disk the more RAM you have the more samples you can load. But Logic in 32 Bit mode still has a RAM limitation of about 4 Gigs physical RAM and 3,7 virtual RAM. Everything exceeding that will crash Logic. Using 3rd party apps like Kontakt 3.5 upwards /which has it's own Memory server) or Vienna Ensemble Pro which also has it's own Memory server and can also serve as a Plug-In host for other VIs will take advantage of all the RAM you have in your system.
So get at least 6 Gigs I would say, it's very affordable if you don't buy it from Apple directly.

Similar Messages

What are the ideal system requirements for Adobe Captivate?*

What are the ideal system requirements for Adobe Captivate?* In order to ensure it runs at a good speed.

I don't know about ideal, but I'm using an Intel Core2 Duo, 3.16ghz, 3.46gb ram, winXP Pro SP3. This is an HP branded PC, it uses the onboard Q45 video.
I rarely have any problems that I haven't caused myself (having too many applications open while I work).
hope that helps.

The ideal system: Creative and Logite

I want to buy a XtremeMusic at 45. or a Elite Pro a 2?.
Which is the best one? Of course the Pro, but it is worth 70? in more? I will only use it to see film, to listen to music and to play videogame.
I have bought the Creative T6060. In order to take advantage of the power of the X-fi, I need to buy a new system?
Which is the best one between Creative GigaWorks? ProGamer G500 at 220? , or a Logitech? Z-5400 Digital 5. at 205?
Some suggestion?
Tanks

I like the combination of creative cards with Logitech speakers. I am currently running X-Fi Elite Pro with Logitech 5300e and I like it lot - I had a Gigiworks 500w system, but the subwoofer died. I do remember with that system, the speakers would crackle - I have yet heard it crackle on my 5300e speakers.
I think most of problems people here is becasue of running on creative speakers - it may not be the sound cards at all. - except for some some AMD systems using nForce motherboards.

Is it possible to sandbox the entire system?

DISCLAIMER
This is partly just thinking out loud.
There may be some completely obvious solution for achieving this that I have not come across.
My ideas may be flawed.
I saw the other thread about sandboxing but that had a different focus and went in a different direction than this hopefully will.
First, by sandboxing I mean the following:
* let an application see the actual system, but only selectively, e.g. make /usr visible but /home inaccessible
* intercept all writes to the system
* let an application see all intercepted writes as though they have actually occurred
* intercept all network communication and allow the user to approve or deny it, e.g. enable a source download from one site but prevent the application from calling home to another
* the application cannot escape the sandbox
* the application should not be able to detect the sandbox
Is this possible?
First I thought about using FUSE to mask the entire filesystem but this would affect all applications and probably wouldn't work on a running sysem.
Then I thought about using virtualization. Maybe it would be possible to create a fake base image of the live host system and then add an overlay to that to create a sandboxed virtual clone of the host system. The network connection could probably by the host in that case.
I don't know if it would be at all possible though to create a fake base image of the live host system. I also don't know if it would need to be static or if the image could remain dynamic. In the latter case. it would probably be possible to create the image with FUSE. Using FUSE it might even be possible to forgo the overlay image as FUSE itself could intercept the writes. There are obvious complexities in that though, such as how to present changes to a file by the host to the guest if the guest has modified it previously. I also have no idea if the guest system could use a clone of the hosts file system.
Why I would want to do this:
* "Safely" test-run anything while protecting your system (hide your sensitive data, protect all of your files, control network access)**.
* Simplified package building: build the application as it's meant to be built in the sandbox, compare the sandbox to the host and then use the differences to build the package***.
* It would be cool.
** Before anyone interjects with the "only run trusted apps" mantra, this would also apply to trusted apps which might contain bugs. Let's face it, most people do not plough through source code of trusted apps before building/installing/running them.
*** This was prompted by my ongoing installation of SAGE which is built in the post-install function instead of the PKGBUILD itself due to the complexities of the build process. The general idea is to create a way in which all application that can be built can be packaged uniformly.

Are you sure that you can change the permissions of symlinks themselves? I think I've tried to make files read-only via symlinks on a local server but ended up using bindfs because it wasn't possible. Even if you can, symlinking everything that might be necessary for a given environment would not be ideal, plus I don't think symlinks can be used across different filesystems.
If a real-life human can figure out if it's he/she is in a chroot and break out of it, then he/she can write a script to do the same. I want a sandbox that could run malicious code with no effect on the system (if that's possible). Also, I think if the chroot idea were truly feasible, makepkg would have been using it for years already to simply install packages in the chroot as you normally would and then package them. There would also be several sandbox applications that could run applications safely. So far I have yet to find any.
I admit that I haven't looked into using a chroot in detail though and of course I may have missed some application which creates such a setup. Right now I think using per-application namespaces with fuse seems the most promising but I won't know until I've finished implementing a test application. If it turns out that it's a dead end I'll take harder look at chroot but it really doesn't seem to be able to do what I want.

The ideal hardware setup / arrangement for After Effects?

Hello there,
Looking to buy some new hardware and am hoping to find some advice on the ideal hardware config for making After Effects scream. I find this questions is sorely lacking answers on the Internet beyond the basics of 'boot from an SSD' and the like... So I am hoping someone can answer these questions once and for all.
Two things I am after:
1. Fast working performance in AE. So when I move a layer about I am able to see it move smoothly in real-time as I drag it about with my mouse. Right now I get either stuttered movement when moving larger layers about, or the image begins to pixelate/drop res to such a horrible extent that I can not see what I am doing. The problem extends to when I am working with a large project file, with many layers, I get nasty lag when attempting to move about in the timeline, opening comps, etc. Everything starts to move quite slowly once I go past a certain number of layers. What upgrades will speed this element, the day to day working rather than rendering, up the most?
2. Faster rendering. Though this is not as key as point number 1.
I am guessing this performance will he helped by a beefier graphics card and more/faster RAM? I currently have a GTX 660ti 2GB and am upgrading to a GTX980 4GB, so hoping that will improve this.
I also have 64 GB of 1600 speed ram that AE happily consumes so think that base is covered. My CPU is a 3930k that is slightly overclocked. It gets maxed out when multicore rendering is happening but not otherwise. I've heard turning hyperthreading off in the BIOS can actually help AE performance?
I am booting/running AE from an SSD (Samsung 840 Pro), and have set my media cache to another dedicated SSD (Samsung 840 Pro). I run/keep my project files on yet another SSD and have other drives holing media.
My drive config plan is this:
- Boot from one 240GB SSD.
- Project files and current working media on 2x 1TB SSDs in RAID 0 (backed up)
- Further media storage on 2x 3TB HDDs in RAID 0 (backed up)
Now I am wondering if I can simply use the 2TB of SSD goodness as both the location for my AE media cache AND my project files/working media? Or am I better off having three fast and seperate storage locations? 1 for the boot, 2 for the project files and media, 3 for the cache?
Otherwise I am running AE on a Hackintosh 3930k CPU overclocked slightly, 64 GB RAM, Sabertooth X79 mobo, 660ti graphics card.
All comments/advice links much appreciated. Apologies if this has already been addressed elsewhere but I have yet to find a detailed response and only generalized comments such as 'use a fast drive for your media cache.'
What I would really like to know is the BEST drive configuration, the questioned detailed above...And what will increase the speed and quality of my real-time workflow in AE the most. Quickly navigating projects without lag, opening detailed comps with many layers, and moving large images around without lag or pixelation.
Thank you!

for After Effects advice, Eric on the forum here can give you the best info. However, I have seen him say many times that AE is MEMORY INTENSIVE,....the more, the better. You HAVE 64GB...that seems very adequate for most workflows.
The OTHER thing he says is that other than Ray-Tracing, the GPU is HARDLY used at all.....CPU speed and number of cores are a BIG factor in AE performance.....your 3930k overclocked should be adequate....the MORE OC, the BETTER.
Next is the drive system....you have NOT described EXACTLY what you are doing NOW....you mentioned what your PLAN is,but for , right NOW you said : " I run/keep my project files on yet another SSD and have other drives holing media. "
HERE is where you MAY be doing something that may....or may NOT.....be causing slowdowns.   With AE it is RECOMMENDED to use a dedicated drive for the "Global Performance Cache"...the HIGHER the speed of this drive, the BETTER, as AE STORES already "rendered" frames, ( for "previews", of course), on it so it DOESN"T have to RE-RENDER ALL the frames all over again every time you make a change to your work !!! So, in YOUR case : your OS drive is great...Samsung Pro models are the BEST...you have the 840 Pro ,which is only SLIGHTLY behind the 850 Pro in performance. ANOTHER 840,or, 850 Pro would be GREAT as the " Global performance cache drive" AND would also be the place to put ALL previews,Cache files, media cache files for Premier Pro,too. The overall speed and less latency of the SATAIII SSD will surpass the performance of a 2 disk RAID 0....even a 3 disk RAID 0.
Next....the speed at which you SERVE UP the video files can be important in preventing a slowdown.....ESPECIALLY if using large, uncompressed files. Here, you have options.....it is NOT necessary to put your project files on a SEPARATE drive from your media...you just want to make sure that the drive with your media and project files is as fast as the OTHERS in your system ! SO, you COULD use a THIRD SSD as a "working drive" for ACTIVE projects only.....a 1TB SSD perhaps...Crucial M550 is CHEAPER than the Samsung and as good as the 840 pros. As the CAPACITY of SSDs are small...you would MOVE all media and completed project files to HDDs for archiving and storage....the use of RAID with your existing HDDs would NOT be needed for this function.
Another option would be to take FOUR quality 1TB HDDs...( the Seagates are selling for $44 right now), and create a RAID 0 off the motherboard to have a large 4TB capacity AND speed similar to the SSDs!   WARNING !!! the odds of ONE drive failing are BIG....you would immediately lose ALL your data !! HOWEVER....if you back up that RAID 0 RELIGIOUSLY....you would have NO worries. One way to do THAT is to buy a 4TB ENTERPRISE level 7200rpm HDD....Seagate has one with a 128 MB cache that does over 200MB/sec. for just over $300.
Even with all this covered, there are MANY factors which can CHOKE a fast computer....the CODECS you are using have a HUGE bearing on performance. The VERSION of After Effects is important...NEWEST versions have the BEST performance with features like the "global performance cache", etc. The use of "third party plug-ins" can CRIPPLE a machine if these are NOT written to take advantage of "hyperthreading",OR, are "32 bit" and HUMBLE your machine because AE is NOW 64 bit!!
Make sure you have Windows fully updated and the newest drivers for your video card. Then , make sure your Windows POWER SETTINGS are set to MAXIMUM PERFORMANCE when"plugged in"....the DEFAULT Windows settings...even under "high performance" has setttings that will THROTTLE your GPU and CPU if you don't change them.....I found THAT out the hard way!
Finally, make sure , in AE settings, you have set the"memory allocation" correctly...there is a formula regarding how much to assign on a "per CPU core basis". There ALSO is a selection to make for "allowing multiple frames" to be processed...make sure THAT is set correctly.
Good luck !!     I hope this helps!

Ideal System Setup (PAGEFILE Recommendations!!)

Hello:
I've got a Core Duo 1.86Ghz and just installed 2gigs of RAM. Any suggestions on my WinXP virtual memory settings?

Darren,
Sorry if this sounds like a brush off, but there are many posts around here about configurations in various price classes, that a quick look at some of the posts here will give you all the info you may need.
If I take your 'ideal system' literally at this moment:
i7-3960X
Asus Rampage Extreme X79 mobo
8 x 8 GB DDR3 1866+
4 x Crucial M4 SSD in raid10 for OS & programs
Areca ARC-1880iX-24 / 4 GB
18 x Hitachi 7K3000 2 TB disks in raid30, including 2 hot-spares for video (8 x r3 + 1 x HS and 8 x r3 + 1 HS, striped)
nVidia GTX 580 / 3 GB
Lian Li A77 case
2 x BR burners
etc.
More realistically, without knowing his budget, i7-2700K, Z68, F4 320 G boot disk, 16 GB, GTX 560+, 2 x 2 aid0 plus a good backup plan.

The ideal WM.

Hello.
I'm still looking for the ideal WM for me. I like awesome so far, but I'm currently running XFCE for compatibility reasons. I reinstalled ArchLinux yesterday and ONLY installed what I need, my former Arch was full with software I didn't really need but it was nice to test it.
My two 24" screens have a resolution of 3840x1080, I always have 5 - 10 Skype windows open, then browsers, editors, terminals, ... And I like stacking WMs, that's why I don't really want WMs like dwm. I've been a GNOME fan for quite a long time, then came XFCE, Fluxbox, KDE4, ... But I just don't like GNOME3, it does not do what I want.
Currently, I have GDM, Fluxbox, XFCE, awesome and Windowmaker installed.
My dream WM has to me minimalistic. I liked the GUI system settings in GNOME2 and KDE4, I liked the windows not having borders in awesome, I did NOT like the fact of not knowing how to permanently set a wallpaper, same with Openbox or Fluxbox.
Would a clean ArchBang installation be a good idea for me?
Compared to you guys, I'm a beginner. I've used Linux for six months now, my first ArchLinux installation was in January. And I'm learning ..
Thanks in advance.

Greetings,
You know of e17 and yet also admit to being new to linux correct?
You stated that you are looking for basically a stacking/floating WM that has some GUI tools, can lack the WM borders, and manage desktop wallpaper. Well e17 can handle those things quite well, being able to be as big and clunky looking or minimal looking as desired, with a very light impact on your system. e17 has many modules, gadgets, and settings for doing things like tiling and what not, changing and removing WM border, and managing wallpaper.
You can also achieve these things in KDE, XFCE, pekWM, openbox, fluxbox, JWM, etc... all with some work differing depending upon what you choose.
I think the largest issue here is that you are looking for something in particular, but give only a vague idea of what you are looking for.

Error message 'Please log on to the SAP system' when selecting 'shop'

In SRM when we click on 'shop' or 'Goods Receipt' we get the error 'ITS System Information 'Please log on to the SAP System' where it prompts user to log on again. However when user logs on it opens up the same screen again saying please log on to the sap system.
This only happens when we shop using the External ITS (wgate), EBP works fine using the Internal ITS.
Please can someone help.
Kindest Regards
Paul

Hi
Please try this ->
Look using SRM transaction SITSPMON and RZ20, RZ21.
Also Please check SAP OSS Note 517860
-> For ITS, You need to maintain the RFC connection in the connection type "T" i.e TCP/IP. Maintain in the Table - TWPURLSVR.
Ensure that you have maintained correct entries in the TWPURLSVR table using SM30 transaction for the ITS Web path (http or https address path). Note you are passing port - 8001 in the address here. Incase you face problems, Please ask you BASIS person to help you out.
-> Please ask you BASIS person to help you out for maintaining ITS settings. (Ensure IACOR service is running properly - ITS server is running), through the transaction SMICM
-> What all logs appear in SLG1 and SM21 transactions after publishing all the Internet services.
-> If you are using ITS 6.2,you need to do the IACOR settings for SRM on the ITS server.Also in SE80 mainatin the Site for SRM system.After this ,you can publish all the ITS services usig the report,W3_PUBLISH SERVICES.
Related links ->
Integrated ITS :Login Problem
Re: ITS_CANT_LOAD_INCLUDE in BBPstart service
Re: ITS_DEST_NOT_FOUND
Re: ITS Configuration
Re: ITS Template not found
Do let me know.
Regards
- Atul

On iOS 8 and "old" device for the operating system. О iOS 8 и "Старых" устройствах на этой операционной системе

USA.
Good day! I like you a fan of the forum users of APPLE. I live in the Russian Federation. Began his acquaintance with this company back in 2010 with the Ipad 2 device was still on ios 5. In January 2014 I made a gift and bought the iPhone 5s on OC IOS 7. I bought it at the official Russian official price that more accurately put Apple in 1100 $. In our country, it is a lot of money. With the money I could live for 3 months. In fact, I became the owner of a top (at the time) from a favorite device of Apple. My iPhone 5s worked perfectly on ios 7. sometimes met friezes light animation, and non-critical bugs, but who is without sin? Favorite company I was willing to forgive it because I see that she is trying to be better and not standing still. Looking WWDC presentation which provided us with iOS 8 you assured me that everything was better, faster, more functional. I was determined that update my iPhone 5s to iOS 8.0 ... APPLE releases new OC iOS 8 ... And I live! Behind the beautiful words that we said at the presentation of the great features of the new iOS hiding "something." And that "something" turned my phone in ... "pumpkin"! Yes! In that same stupid pumpkin! And now I will explain why I think it's pumpkin, not rose.
Sea bugs ... and they are awful and terrible as it does not give me the full extent of my work enjoy iPhone 5s!
Start from the beginning:
1 Streaming through technology "Air play".
"Air play" ceased to function properly! He was often disconnected from Apple tv and Apple airport express last generation. Apple tv 2g can not receive the signal from my iPhone 5s! And when it's all the same he gets a video playback does not last long, it just breaks and does not connect again! Helps to restart Apple TV and a hard reset by holding the button "HOME" button and "POWER". On the "Apple TV" is worth the latest firmware as these problems are manifested in the previous firmware of the device.
2 Built-in browser "Safari".
Tab in the "Safari" became constantly updated when I switch to another application or the other tabs! Apparent lack of memory (on iOS 7.1.2 with it all much better. At least when switching tabs does not re-update the previous tab).
Playing online video on non-optimized mobile site in the browser "Safari" really does not work! It is turned on and loaded almost to infinity! Sometimes just a black screen with an icon "Play" to be pressed at least 100 times, and the result is 0!
Scroll pages in the browser have become terribly sharp and smooth! on iOS 7.1.2 everything is fine, nice and smooth and no such bugs! Total confusion and thoughtfulness browser "Safari".
If the video still runs (for me equates to a miracle) then when rewinding the film is generally something strange ... Fast chooses how minutes and seconds I watch a movie (usually just starts playing from the beginning), or does not respond at all ... This is the same magic Apple? Unlikely.
3 multitasking menu (double-press "HOME").
Call multitasking (by double-clicking "HOME") began working with a delay, with a lag, c jerky animation, and sometimes even without it.
Control Center (which is called swipe upwards) was to slow down! Yes! That retard! Animation jumping shutter control center began play with tangible frame loss! If iPhone 5s under the control of OS iOS 7.1.2 everything happened smoothly, beautifully and dynamically in the iOS 8.0 it looks like on the iPhone 5 running iOS 7.C than strongly connected is not clear! Graphic differences from iOS iOS 7 8 almost equal to 0, and the speed of decline in almost 50%! How ?! Why ?! Why does my iPhone 5s become the iPhone 5 ?! This is an artificial slowing my device to increase the demand on the iPhone 6 or still glitch iOS 8.0 for iPhone 5s? Honey the company Apple, I really hope for the 2nd. Especially this shortfall fps animation curtain markedly if you open multitasking (acquired by double button "HOME") and call the control center and you'll see that the animation is playing choppy and not smooth! On IOS 7.1.2 this is not! Control center jumps smoothly and beautifully! On iOS 8.0 it happens all the time! Even if you turn off your favorite contacts and recent calls (I'm ashamed to say they thought) that appeared in iOS 8 (they are above programs on the multi-tasking) not solve the problem. As well, if you call the control center on the lock screen, then drop FPS will be very noticeable even to the untrained viewer (especially if you take two iPhone 5s one running iOS 7 and 8, the second on iOS and compare them on the forehead). If the Control Center click airdrop (air play) the animation of its appearance again played in spurts and not terribly nice and smoothly (especially noticeable on the lock screen and comparison of the forehead)! In a telephone call has been going absolutely shameless FPS drop a call center management and other activities!
And yes, for me it is a critical issue! I do not want the transition to iOS 9 my iPhone 5s turned to the iPhone 4 on iOS 7 (vid you all remember this terrible story?)! I want my iPhone 5s worked as smoothly as on iOS 7.1.2! Nor any justification for this inhibition iskuvsstvennoy I can not see! 8 beautiful iOS did not! graphic elements do not appear! So goes the Apple is doing this on purpose ?! We go down the list!
4 minor bugs that just break my brain and kill all the beauty of the use of "the best mobile operating system in the world"!
4.1. When a call comes in when you clicked the icon making a call the phone for about 2-3 seconds, vibrates and plays a melody. On iOS 7.1.2 ringtone and vibration stops as soon as you have accepted the challenge and in your ear does not play your ringtone by "imagine Dragons", cheeks beats you invented vibration in the style of "Tick-tonic."
4.2. When you look at the page on the Internet-phone terribly terribly strongly heated! A pair of piping hot! On iOS 7.1.2 is no such problem! Telephone hot, but not as much as on iOS 8.0!
4.3. Folder on the home screen opens with a delay of 0.5-1 second is the impact on the overall impression of iOS 8.0.
4.4. When you create a set (12 pieces) icons in one folder if dramatically open the folder and make swipe to the left then the following icons in this folder does not have time to boot up and are delayed by 1 second.
4.5. When you create a folder with 1-9 icons do if the above action fails then the animation (the same bug exists in iOS 7.1.2). It is very not nice aesthetically.
4.6. Scroll to your "Settings" felt terribly antsy. Although it is not only in the application "Settings" but also to the entire system and applications in general ...
4.7. Scroll to the Home screen has become less responsive to user actions all movements inogoda occur with jerky animation and some delay to the user.
4.8. Quite often, and without rational reason for going off the sensor device. That is, the screen does not respond to any user action! Helps pressing "HOME" or hard reset by holding the button "HOME" and "POWER".
4.9. Most people on the iPhone 5s lost communication with a mobile operator. Just go on and lost and because of this I have missed calls from their loved ones and friends (would cost you to be glad that I have not missed calls on business issues).
5.0. Many owners of iPhone 5s and iPhone 5 uhudzhenie complain about battery life. I honestly did not notice it, but we will not drop this off.
Outcome.
And now gets quite an interesting question, why? Why does my iPhone 5s began to slow? Why in the absence of graphical improvements are absolutely the same actions were reproduced with the loss of fps, slow down, lag, hover, fly? Why, if put next iPhone 5s on iOS 7.1.2 and exactly the same iPhone 5s on iOS 8.0 and pull the control panel to call multitasking bar, carry out all other actions I have described it on your device running iOS 7.1.2 it will work without any delays, lags, the deterioration in the responsiveness of the interface, reducing fps, and no departures from simple applications written directly by Apple? I see absolutely no any obstacles in the way to make the iPhone 5s to the operating system iOS 8.0 worked with the same smoothness, with the same responsiveness and speed as the iPhone 5s running iOS 7.1.2! I do not see what these restrictions are not!
There are many different bugs that I do not even remember now (as I write this text on emotions (positive) as able to roll back your iPhone 5s back to iOS 7.1.2, and he seemed to come alive with new life) and so far I have esteemed company APPLE does not eliminate these improvements do not, I will not go back to iOS 8.0! if the dispensation of these bugs, flaws, intentional degradation of the (almost identical in performance in comparison with the iPhone 6) IPhone 5s will not happen and the company APPLE will continue to apply to consumers of their products as a beta tester I will be forced to organize a petition and file a class action lawsuit in court not only in their own country (which is for the Russian Federation) but also in the United States and in other countries where people are just like me trying to deceive, mislead and force companies to buy new devices APPLE without having expressed any any more substantial explanation except as <iPhone 6 was 25% more powerful on with alignment with the iPhone 5s>!
P.s.
I hope Apple will still listen to their users and I also hope that it (Apple) still change his mind and will try in the near future to give users not-so-old devices (iPhone 5s, iPad Air, iPad mini Retina) and enjoy on all the new features of iOS 8 no lag, locked up, overheating, inhibited animation. Thank you for being there!
Ru.
Всем доброго времени суток! Я как и вы форумчане являюсь фанатом компании APPLE. Проживаю я в Российской Федерации. Начал свое знакомство с этой компанией в далеком 2010 году с устройства Ipad 2 тогда еще на ios 5. В январе 2014 я сделал себе подарок и купил iPhone 5s на OC IOS 7. Купил я его официально по официальной Российской цене которую выставила Apple точнее за 1100$. В нашей стране это очень большие деньги. На эти деньги я бы мог жить 3 месяца. По сути я стал обладателем топового (на тот момент) устройства от любимой компании Apple. Мой iPhone 5s прекрасно работал на ios 7. Иногда встречались легкие фризы анимации, и не критичные баги, но кто без греха? Любимой компании я был готов это простить так как вижу, что она старается быть лучше и не стоит на месте. Посмотрев презентацию WWDC на которой представили iOS 8 нас с вами уверяли, что все стало лучше, быстрее, функциональнее. Я твердо решил, что обновлю свой iPhone 5s до iOS 8.0... APPLE выпускает новую OC iOS 8... И я обновился! За красивыми словами, что нам говорили на презентации, за великолепными функциональными возможностями новой iOS скрывалось "нечто". И это "нечто" превратило мой телефон в... "тыкву"! Да! В ту самую тупую тыкву! И сейчас я объясню почему я думаю, что это тыква, а не роза.
Море багов... причем они ужасны и страшны так как не дают мне в полноценной мере насладится работой моего iPhone 5s!
Начнем по порядку:
1. Потоковая передача данных посредством технологии "Air play".
"Air play" перестал нормально работать! Он стал часто отсоединяться от Apple tv и Apple airport express последнего поколения. Apple tv 2g не может принять сигнал от моего iPhone 5s! А когда все же это у него получается то воспроизведение видео длится не долго оно просто обрывается и не дает подключиться повторно! Помогает перезагрузка Apple TV и жесткий сброс посредством удержания кнопки "HOME" и кнопки "POWER". На "Apple TV" стоит последняя прошивка так же эти проблемы проявлялись и на предыдущей прошивке устройства.
2. Встроенный в систему Браузер "Safari".
Вкладки в "Safari" стали постоянно обновляться когда я переключаюсь на другое приложение или на другие вкладки! Явная нехватка оперативной памяти (на iOS 7.1.2 с этим все гораздо лучше. по крайней мере при переключение вкладок не происходило повторное обновление предыдущей вкладки).
Воспроизведение онлайн видео на не оптимизированном для мобильных устройств сайте в браузере "Safari" толком не работает! Оно включается и загружается чуть ли не до бесконечности! Порой просто черный экран с иконкой "Play" на которою нажимай хоть 100 раз, а результата 0!
Пролистывание страниц в браузере стали до ужаса резкими и не плавными! на iOS 7.1.2 все прекрасно, плавно и красиво и таких багов нет! Общая заторможенность и задумчивость браузера "Safari".
Если видео все же запускается (что для меня приравнивается к чуду) то при перемотке фильма происходит вообще что-то непонятное... Перемотка сама выбирает с какой минуты и секунды мне смотреть фильм (чаще просто начинает воспроизводить все с самого начала) либо не реагирует вовсе... Эта та самая магия Apple? Непохоже.
3. Меню многозадачности (двойное нажатие кнопки "HOME").
Вызов многозадачности (посредством двойного нажатия кнопки "HOME") стал работать с задержкой, с лагом, c дерганой анимацией, а порой и вовсе без нее.
Центр управления (который вызывается свайпом снизу вверх) стал тормозить! Да! Именно тормозить! Анимация выпрыгивания шторки центра управления стала воспроизводиться с ощутимой потерей кадров! Если на iPhone 5s под управление OS iOS 7.1.2 все происходило плавно, красиво и динамично то в iOS 8.0 все выглядит как на iPhone 5 под управлением iOS 7.с чем это связанно решительно не понятно! Графические отличия iOS 7 от iOS 8 практически равны 0, а скорость работы сниженна практически на 50%! Как?! Почему?! Почему мой iPhone 5s стал iPhone 5?! Это искусственное замедление моего устройства для повышения спроса на iPhone 6 или все же недоработка iOS 8.0 для iPhone 5s? Дорогая компания Apple, я очень надеюсь на 2-е. Особенно эту нехватку fps в анимации шторки заметно если открыть многозадачность (посредством двойного нажития кнопки "HOME") и вызвать центр управления и вы увидите что анимация проигрывается рывками и не плавно! На IOS 7.1.2 такого нет! Центр управления выпрыгивает плавно и красиво! На iOS 8.0 это происходит постоянно! Даже если отключить избранные контакты и недавние вызовы (я грешным делом подумал на них) которые появились в iOS 8 (они находятся выше программ на панели многозадачности) проблему не решить. Так же, если вызвать центр управления на экране блокировки то падение FPS будет очень заметно даже для неподготовленного зрителя (особенно если взять два iPhone 5s один под управление iOS 7 и второй на iOS 8 и сравнить их в лоб). Если в центре управления нажать кнопку airdrop (air play) то анимация ее появления опять таки проиграется рывками и ужасно не красиво и не плавно (особенно заметно на экране блокировки и при сравнение в лоб)! При телефонном вызове происходит уже совсем уж бессовестное падение FPS при вызове центра управления и при других действиях!
И да, для меня это критичная проблема! Я не хочу чтобы при переходе на iOS 9 мой iPhone 5s превратился в iPhone 4 на iOS 7 (Вы видь все помните эту страшную историю?)! Я хочу чтобы мой iPhone 5s работал так же плавно как и на iOS 7.1.2! Ни каких оправданий для этой искувсственной заторможенности я не вижу! iOS 8 красивей не стала! графических элементов больше не появилось! Так выходит компания Apple делает это специально?! Идем дальше по списку!
4. мелкие баги которые просто разрывают мой мозг и убивают всю красоту использования "Самой лучшей мобильной операционной системы в мире"!
4.1. При входящем вызове когда вы нажали иконку принятия вызова телефон еще около 2-3 секунд вибрирует и проигрывает мелодию. На iOS 7.1.2 мелодия и вибрация останавливается как только вы приняли вызов и вам в ухо не играет ваш рингтон в исполнении "imagine Dragons", по щекам не бьет придуманная вами вибрации в стиле "Тик-тоник".
4.2. Когда смотришь страницы в интернете телефон ужасно-ужасно сильно греется! Парой обжигающе сильно! На iOS 7.1.2 такой проблемы нет! Телефон горячий, но не так сильно как на iOS 8.0!
4.3. Папки на домашнем экране открываются с задержкой в 0.5-1 секунду это сказывается на общем впечатлении от iOS 8.0.
4.4. При создании множества (12 штук) иконок в одной папке если резко открыть папку и сделать свайп влево то следующие иконки в этой папке не успевают загрузиться и отображаются с задержкой в 1 секунду.
4.5. При создании папки с 1-9 иконками если проделать описанное выше действие то произойдет сбой анимации (этот же баг есть и в iOS 7.1.2). Это крайне не приятно эстетически.
4.6. Пролистывание в приложении "Настройки" стало ужасно дерганым. Хотя не только в приложении "Настройки" но и по всей системе и в приложениях в целом...
4.7. Пролистывание на Домашнем экране стало менее отзывчивое на действия пользователя все движения иногода происходят с дерганой анимацией и какой-то задержкой на действия пользователя.
4.8. Довольно часто и без объяснимой причины происходит отключения сенсора устройства. То есть экран не реагирует ни на какие действия пользователя! Помогает нажатие кнопки "HOME" либо жесткий сброс посредством удержания кнопки "HOME" и "POWER".
4.9. Большинства людей на iPhone 5s пропадает связь с сотовым оператором. Просто берет и теряется и из за этого я уже пропускал звонки от своих близких и друзей (стоило бы вам порадоваться, что я не пропустил звонки по рабочим вопросам).
5.0. Многие обладатели iPhone 5s и iPhone 5 жалуются на ухуджение работы аккумулятора. Я честно говоря этого не заметил, но не будем сбрасывать этого со счетов.
Итог.
А теперь встает довольно интересный вопрос, почему? Почему мой iPhone 5s стал тормозить? Почему при отсутствии графических улучшений абсолютно одни и те же действия стали воспроизводится с потерей fps, тормозить, лагать, зависать, вылетать? Почему если положить рядом iPhone 5s на iOS 7.1.2 и точно такой же iPhone 5s на iOS 8.0 и вытянуть панель управление, вызвать панель многозадачности, провести все остальные действия описанные мною то на устройстве под управлением iOS 7.1.2 все будет работать без каких либо задержек, лагов, ухудшение в отзывчивости интерфейса, уменьшении fps и просто без вылетов из приложений написанных непосредственно компанией Apple? Я не вижу абсолютно ни каких преград в том чтобы сделать так чтобы iPhone 5s под управлением операционной системой iOS 8.0 работал с той же плавностью, с той же отзывчивостью и скоростью, что и iPhone 5s под управлением iOS 7.1.2! Не вижу от того, что этих ограничений нет!
Есть еще множество различных багов о которых я сейчас даже не вспомню (так как этот текст я пишу на эмоциях (положительных) так как смог откатить свой iPhone 5s обратно на iOS 7.1.2 и он как будто ожил новой жизнью) и пока глубокоуважаемая мною компания APPLE не устранит эти не доработки я не буду возвращаться обратно на iOS 8.0! если устроения этих багов, недоработок, умышленного ухудшения работы (практически одинакового по производительности в сравнении с iPhone 6) IPhone 5s не произойдет и компания APPLE будет и дальше относиться к потребителям своей продукции как к бета тестерам я буду вынужден организовать петицию и подать коллективный иск в суд не только в своей стране (коей является Российская Федерация) но и в США и в других странах где людей так же как и меня пытаются обмануть, ввести в заблуждение и заставить покупать новые устройства компании APPLE не дав на то ни каких более существенных объяснений кроме как < iPhone 6 стал на 25% мощнее по с равнению с iPhone 5s>!
P.s.
Я надеюсь компания Apple все еще прислушивается к своим пользователям и я так же надеюсь, что она (Apple) все же одумается и постарается в ближайшее время дать пользователям не таких уж и старых устройств (iPhone 5s, iPad Air, iPad mini Retina) наслаждаться и дальше всеми новыми возможностями операционной системы iOS 8 без лагов, подвисаний, перегревов, заторможенной анимации. Спасибо, что вы есть!

Agreed! This bug with the ringtone delay (№4.1) is really annoying

How to create a document/report on all objects in the BW system?

Hi,
The requirement in our company is to create a document/report with the list of all the objects that exist in the BW system for various applications. This list should contain the technical details of the different objects and where an object is used, what's the source for the object etc. The information should be similar to that in the Metadata repository but it should be one single document/report which includes all the objects.
I tried using the 0TCTBWOBJCT info object (content browser) but it was not of great help.
Can anyone help me out in this task?
Thanks,
Anu

Hi,
Try to use tables RSOSFIELDMAP, RSDSSEGFD and RSTRAN
Hope it helps
bhaskar

How to load a class dynamically in the current/system class loader

I need to dynamically load a new jdbc driver jar to the current/system class loader... Please note that creating a new classloader will not help since the DriverManager refers to the systemclassloader itself.
Restarting the application by appending the jar to its classpath will solve the problem but I want to avoid doing this.

Did you then create a ClassLoader to load the JDBC
driver and then install it into the system as
directed by the JDBC specification (ie
Class.forName(someClassName))?
And then try to use it from a class loaded fromsome
other ClassLoader (i.e. the system class loader)?
If you did not try this please explain why not.O.K. I just looked at the source to
java.sql.DriverManager. I did not know what I was
talking about, as what I suggested above will not
work.
This is my new Idea:
Create a URLClassLoader to load the JDBC driver also
in this ClassLoader you need to place a helper class
that does the following:
public class Helper {
public Driver getJDBCDriver(String driverClassName,
String url) {
try {
Class.forName(driverClassName);
Driver d = DriverManager.getDriver(url);
return d;
catch(Exception ex) {
ex.printStackTrace();
return null;
}Now create an instance of the Helper class in the new
ClassLoader, and call its getJDBCDriver method to get
an instance of the driver (you will probably have to
create an interface in the root class loader that the
Helper implements so that you can easily call it).
Now from the root classloader you can make calls
directly to the returned Driver and bypass the
DriverManager and its restrictions on cross
ClassLoader access.
The only catch here is that you would have to call to
the returned Driver directly and not use the Driver
Manager.This sounds like will work but I did not want to load DriverManager in a new classloader.. I did a hack
I unzip the jar dynamically in a previously known location (which I included in my classpath when launching the app). The classLoader finds the class now though it did not exist when the app was launched !
A hack of-course but works eh ..

HT2477 I have a new MacBook Pro which has Windows 7 installed so I have only ever used it as a PC, I would like to use the apple system but was never shown how to do this and I cannot even work out how to switch it on . If I just press power iI get wind

I switch the power on on my MacBook Pro I get windows7
this is no problem but I love my IPad and would like to use the apple system on my MacBook .
CAn anyone tell me which keys I press to change from windows 7 to Apple most articles I have read tell you it is easy but not one says "firstly press x then press y and when you see c press v so I no idea how to do it,
I am well educated but I am 75 so I do not understand the jargon but I am fairly good at using computers and I do like the app system.
I Would be very pleased if someone can advise me
best regards
TOm

Reboot, hold the option key down as soon as you hear the chime. When the Boot Manager appears select OSX instead of Windows.

Error while installing J2EE Add- In to the ABAP system

Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
Srinivas

Ananda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you.

My time capsule all of a sudden disconnected from the wireless system and can no longer be fund by my MacBook Pro. The little lamp on the the capsules has turned off, but it still makes a noice inside,

My Time capsule did a backup yesterday in the morning without any problem. All of a sudden, it disconnected from the wireles system last night and the little indicator lamp turned off. It still makes a noice, as if a disc was turning inside. The Time Capsule was bought last year in June. Any suggestiom what to do? What happens if I press the little buttom (reset?), will I loose af my backup?

Do a reset.. power off the TC..
Hold in reset and power on.. keep holding in reset until it flashes rapidly.. if it turns on at all.
If you bought it in June.. take it back today.. it is broken.. at a guess.
Some Gen4 are failing this way.. get Apple to replace it.. even if it is a few days out of warranty it won't be much.

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

The Ideal System?

Similar Messages

Maybe you are looking for