The iMac camera turns on when iTunes is open

When ever I open iTunes the build in camera turns on and if I open face time at the same time I get a message saying there aren't any cameras available

I am having the same problem since installing Mountain Lion--podcasts that I delete from iTunes are still on my devices such as iPad, iPhone and iPod Touch. How do you get them off without having to erase and reinstall everything?

Similar Messages

  • Your update 33.0 is not compatable with Norton antivirus and the screen only turns black when trying to open firefox. Please help

    Please see question. I have tried uninstalling and reinstalling, but with no success. Chrome and Int. Exp both work fine, but nothing comes up but a black screen covering most of my monitor in Firefix.

    Sorry but it is always the other way. Norton needs to update their Firefox extension to work with the new major version Release so it can tie in with their antivirus client.
    The good news is that Norton as usual has a live-update patch for Firefox 33.0 which was available on October 13, the day be fore Firefox 33.0 was Released.
    *http://community.norton.com/forums/firefox-33-support-norton-toolbar-0
    *https://community.norton.com/blogs/product-update-announcements/firefox-33-und-norton-toolbar
    As for the black screen it may be due to old graphic drivers
    https://support.mozilla.org/en-US/forums/contributors/710777?last=62406#post-62379
    start Firefox into safemode '''by pressing the shift key while the application is launching''' & disable Hardware Acceleration in the Firefox ''menu ≡ > Options > Advanced > General'' (You will need to restart Firefox to take effect).

  • TS2972 My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user.  Home Sharing is turned ON.  How do I fix this problem?

    My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user.  Home Sharing is turned ON.  How do I fix this problem?

    You'll have to contact the developer about this. Apple doesn't make this app;

  • I Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me

      Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me this has been like this for 30 minutes

    Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
    If this does not work, try to connect again in recovery mode: http://support.apple.com/kb/HT1808

  • I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4.  It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition.  Help!

    'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4.  It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition.  Help!

    Hi there 8472kck!
    I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    and that information comes from this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Does the iPhone display turn on when the iPhone is asleep anan alarm sounds

    My iPhone was asleep when its alarm sounded. It was in airplane mode (I didn't want someone calling me during the night). When the alarm sounded, I heard the alarm sound and the phone vibrate, but the display itself was still off; I had to press the on/off/sleep button to see it.
    Is that as expected?

    It's weird -- I set an alarm, put the phone to sleep, and this time the display did turn on when the alarm sounded. Hmm...

  • Can I disable the "corners" that turn down when using Parallels?

    Can I disable the "corners" that turn down when using Parallels?

    "Auto Save" is Apple's term, I guess. Its controls are so well-hidden I'm flying blind here.
    But as I put it in a note to a magazine dedicated to Apple:
    I think Auto Save is one of the dumbest things Apple has ever come up with -- oh so typical of what Bill Gates used to give people: lots of extra stuff no one ever asked for, and no one at his company ever thought through.
    Say there's a conflict with a program or two I'm trying to use. Machine locks up. I force quit and shut down -- probably without ever seeing the option of stopping Auto Save.
    When I open up again, what am I faced with? Yup, exactly the same mess I just tried to get away from.
    Boo, Apple!

  • Inserting music cd when itunes is open causes instant reboot

    When itunes is open and I insert a music cd with .cda files on it the computer instantly reboots. It reads and plays back the files fine on other players, but obviously this is no helpful if I want to import into the itunes library.
    I found some posts with similar problems but no solutions posted. Any ideas? Please let me know if I can supply some more info to help find the solution.
    BTW I upgraded the itunes today, but problem remains.
    TIA
    Digikiwi

    I've been researching and came across Windows Debugger: Here's the report form the memory dump
    Microsoft (R) Windows Debugger Version 6.6.0003.5
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\WINDOWS\Minidump\Mini061106-04.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is:
    SRVc:symbolshttp://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 2600.xpspsp2gdr.050301-1519
    Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
    Debug session time: Sun Jun 11 12:05:18.625 2006 (GMT+12)
    System Uptime: 0 days 0:05:25.233
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 100000D1, {87b246f0, 2, 1, 86dc34ff}
    Unable to load image Vax347b.sys, Win32 error 2
    * WARNING: Unable to verify timestamp for Vax347b.sys
    * ERROR: Module load completed but symbols could not be loaded for Vax347b.sys
    Probably caused by : Vax347b.sys ( Vax347b+ef58 )
    Followup: MachineOwner
    kd> !analyze -v
    * Bugcheck Analysis *
    DRIVERIRQL_NOT_LESS_OREQUAL (d1)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high. This is usually
    caused by drivers using improper addresses.
    If kernel debugger is available get stack backtrace.
    Arguments:
    Arg1: 87b246f0, memory referenced
    Arg2: 00000002, IRQL
    Arg3: 00000001, value 0 = read operation, 1 = write operation
    Arg4: 86dc34ff, address which referenced memory
    Debugging Details:
    WRITE_ADDRESS: 87b246f0
    CURRENT_IRQL: 2
    FAULTING_IP:
    +ffffffff86dc34ff
    86dc34ff 86b1d4dac100 xchg [ecx+0xc1dad4],dh
    CUSTOMERCRASHCOUNT: 4
    DEFAULTBUCKETID: COMMONSYSTEMFAULT
    BUGCHECK_STR: 0xD1
    LASTCONTROLTRANSFER: from 468b10fb to 86dc34ff
    SYMBOLON_RAWSTACK: 1
    STACK_TEXT:
    WARNING: Frame IP not in any known module. Following frames may be wrong.
    80500214 468b10fb 878d0f44 80000000 75006e7e 0x86dc34ff
    80500218 878d0f44 80000000 75006e7e bbbe804b 0x468b10fb
    8050021c 80000000 75006e7e bbbe804b 00000001 0x878d0f44
    80500220 75006e7e bbbe804b 00000001 568a4275 0x80000000
    80500224 bbbe804b 00000001 568a4275 cabe0f6c 0x75006e7e
    80500228 00000000 568a4275 cabe0f6c 087d8b57 0xbbbe804b
    STACK_COMMAND: dds @$csp ; kb
    FOLLOWUP_IP:
    Vax347b+ef58
    f7285f58 ?? ???
    FAULTINGSOURCECODE:
    FOLLOWUP_NAME: MachineOwner
    SYMBOL_NAME: Vax347b+ef58
    MODULE_NAME: Vax347b
    IMAGE_NAME: Vax347b.sys
    DEBUGFLR_IMAGETIMESTAMP: 426c9fbc
    FAILUREBUCKETID: 0xD1WVax347b+ef58
    BUCKET_ID: 0xD1WVax347b+ef58
    Followup: MachineOwner
    I hope this provides a bit more data to delineate the problem's source

  • HT203163 can anyone help when itunes wont open in windows 7

    Can anyone help when itunes wont open at all in windows 7

    I'm having the same issues with windows 7 32 bit. I can download iTunes, the icon appears on my desktop, but when I go to double click on it to open nothing happens. not even an error message.

  • MacBook won't go to sleep when iTunes is open

    Hello, everyone.
    My MacBook refuses to go to sleep by itself when iTunes (version 9.0.3)is open. However, I can make it go to sleep using the Apple menu, the keyboard or the remote control (pressing and holding the play button).
    I've checked this page
    http://support.apple.com/kb/HT1776
    but the solution is not there.
    When iTunes is open, I make sure there is nothing playing or downloading (no song, no podcast, no video). iTunes checks for new episodes of podcasts every hour, and the computer is set to go to sleep after a few minutes of inactivity.
    Any ideas?
    Best regards,
    Jobuscon

    Hi.
    I had the same problem not to long ago.
    I did the following steps to fix the problem:
    1. Download Smart Sleep preference pane, (install for ALL USERS), and change your computer's sleep mode to SMART SLEEP.
    2. Download and install the latest Debug kit straight from Apple here: http://developer.apple.com/hardwaredrivers/download/usbdebug.html
    (you may need to agree to terms or whatnot)
    3. Once your computer restarts after a successful install of the debug kit, try closing your lid, and make sure you have no USB or other peripherals attached to your MacBook.
    Good luck

  • Internet Explorer Issue when ITunes is open

    I just installed ITunes and have already downloaded some cds. The problem is, Internet Explorer more or less becomes inactive after I open ITunes. If I open Internet Explorer first, it works fine. Once I open ITunes though, the internet more or less stops working. If I open ITunes first, Internet Explorer never loads. It's not giving me an error message or anything and the page just becomes blank. It's showing as if it is connecting to the website though. Any ideas? I will cry if I can't surf the web while importing all 200 disc I have. Thanks!
      Windows XP  

    I have this issue since I started using iTunes last year, I keep updating the software but that hasn't helped. Various mswindows systems (2000 + XP, laptops and desktops) with and without being introduced to an iPod.
    The basic scenario is that when iTunes is running, at some point the system becomes unresponsive - the windows explorer (complete UI), Lotus Notes, Firefox... it is almost like iTunes is holding a lock on a resource that the others need to redraw their screens.
    The only fix I've found is to close iTunes, praying that when I restart it it'll work.
    Any suggestions on things to try? Ones like "get the company to switch to a Mac" aren't helpful
    -Simon.

  • Recent podcasts of podcasts I subscribe to are not downloading when iTunes is opened

    recent podcasts of podcasts I subscribe to are not downloading when iTunes is opened or Touch sync is attempted. 

    Presumably, you normally open iTunes and let it automatically check for new epsiodes. (The frequency with which it does this can be changed, see below.) Have you allowed it time to think about checking? My iTunes is set to check only once a day.
    First of all, make sure that the Settings for Podcast downloads are still set the way you want. (Settings have been known to change - especially after iTunes updates).  Look in Library/Podcasts/Settings (which is at the bottom of the Podcasts window) and makes sure that Check for new episodes: is not set to "manually" and that When new episodes are available is not set to to "do nothing".
    If those settings are okay, make sure that your iTunes can still access the internet. (Can you get the the iTunes Store front page?) If other programmes can access the internet, but iTunes cannot, check that your firewall will allow iTunes access.
    Let us know how you get on.

  • How to view the settings of the sequence (info that appears when you first open sequence)?

    Hi I would like to ask how to view the current settings of the sequence i am already working in, the same information that appears when you first open a new sequence
    eg.
    General
    Editing mode: QuickTime DV PAL
    Timebase: 25.00fps
    Video Settings
    Frame size: 720h 576v (1.4587)
    Frame rate: 25.00 frames/second
    Pixel Aspect Ratio: D1/DV PAL Widescreen 16:9 (1.4587)
    Fields: Lower Field First
    Audio Settings
    Sample rate: 48000 samples/second
    Default Sequence
    Total video tracks: 3
    Master track type: Stereo
    Audio Tracks:
    Audio 1: Standard
    Audio 2: Standard
    Audio 3: Standard
    I have forgotten which setting I chose for my current sequence and have tried to look under project settings and also sequence settings
    but the info that you see when you first open a new sequence doesn't show, especially if the editing mode is PAL or NTSC etc.
    How can I find out this information that my current sequence is on?
    Thanks

    Thanks for your reply
    Is there a way to see what preset I chose when i first chose the sequence? As under 'sequence settings' i don't see this info.
    e.g
    DV PAL "Widescreen 48kHz"
    As i do not remember and fear it may ruin the HD video I am currently editing.
    Thanks

  • Why do black lines appear across the message part of emails when I first open Thunderbird

    Black lines appear across the message part of emails when I first open Thunderbird. This has been happening the last couple of days and is very annoying. It used to happen on Mozilla when I would go on the internet. It has stopped.
    HELP!!! NOW!!!

    Screen shot please?
    https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem
    Which version of Thunderbird? Which OS?

  • Nothing is happening when itunes is opened and i connect the iphone 4 to it

    I just bought the 32g iphone 4 and when i turn off my other phone and connect this new iphone nothing is popping up in my itunes.
    Please, please, please someone help me!

    Is your computer a laptop computer or a desktop?
    Look at the underside if it is a laptop and you should find the make/model. Look at the back if it is a desktop.
    Even more basic, is it a Mac (Apple computer) or a PC?
    To find the OS if it is a PC, do a restart when it reboots it should say WindowsXP or Windows Vista, or Windows 7. If it is a Mac click on the Apple in the top left hand corner then click on About this Mac. A window will open and you should find the OS version number, like 10.4.11 or 10.5.8.

Maybe you are looking for