The image freeze at a single frame

When I tray to play, the image freeze at the first frame. I can listen the audio and control the color in the panels, but the image is freeze.
I have a Mac OS 10.8  2.7 Ghz Intel Core i7  16 GB 1600 Mhz DDR3
thanks

HI Miko,
as I said read the manual, prior to using proxies you need to generate proxie media for all of your clips, this is an option on importing your vision, or can be done later, as in your case, select all of your media, depending on the amount of media this will take some time, everyclip is having a second low quality and bandwidth version/proxie created that you will use for editing, upon completion of editing you then swap back to original or optimised media, re-render all of your effects and exports.

Similar Messages

  • When I use a tool on an enlarged image the image freezes and I can't get it to move unless I change tools. I tried resetting tools and uninstalling and reloading CC. What should I do?

    When I use a tool on an enlarged image the image freezes and I can't get it to move unless I change tools. I tried resetting tools and uninstalling and reloading CC. What should I do?  Once any tool is used I can't change its size or move the image.

    Howdy,
    Sorry for the lack of info. It is Adobe Photoshop CC, I have been using
    CS5 and am trying the trial version of CC to see if it worth changing
    to. Any tool works once but freezes the tool sizing and image movement.
    I am also using the Beta version of Mac Yosemite. But the CS5 version is
    working fine.
    Hasta,
    Bob McCaw

  • Premiere CS4. Video-individual images freeze. abrupt change from frame to frame.

    Hi
    I'm working with Adobe Premiere CS4... windows XP prof SP3 4GB RAM. ATI Radeon 38XX Graphic
    my problem is as following: working window: the projection of individual frames in a movie doesn't run smoothly, the change from frame  to frame is abrupt, almost robotic...it also freezes occasionally .. sound is fine though.
    I've reinstalled all recent graphic and sound drivers and also latest updates but the problem is still there...
    Please advice A:S:A:P
    Thanks,
    Elena

    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size

  • Converted 7D Footage to ProRes422(HQ) - But still choppy, Image freezes

    I'm working with Canon 7D footage.
    I've converted the footage to ProRes422(HQ) using Compressor but when I try to play it back in FCP 7, it the image freezes a few frames into the clip. Audio is fine.
    Isn't this the right codec? Is it a setting in FCP that I am missing?
    Please help.
    L

    ProRes422 (HQ) is overkill for the highly compressed H264 format that this camera shoots.
    Transcode to regular ProRes or even ProRes LT. Going to HQ will not make the footage that you shot any better than it already is.
    http://www.apple.com/finalcutstudio/resources/whitepapers/L342568A_ProResWP.pdf

  • How to use single frame in a page

    Hello, i would like to now how to make a frame in a page
    without having two or more, i was used to work with GoLive and
    there i could use the grid an put a single frame and make links to
    other pages that would open in that frame, it worked wel for me,
    but since I switched from golive to dreamweaver CS3 i am not able
    to do so. Is there some one how could tel me how to do so, since i
    use a lot of single frames in my pages,
    greetings

    why are you wanting to use single frames?
    They allow having the initial frame address stay in the
    address bar, and not
    show the linked page's address. The problems they cause
    usually override any
    value.
    Or- if we aren't using the same words the same way, please
    give an example
    site of what you want to do.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Whenever I play youtube videos on my apple tv the youtube logo and menus are superimposed on the image.  Any suggestions how to see just the video?

    I am unable to figure out how to view a youtube video without the youtube logo and the menus superimposed over the image.  Any suggestions?

    Found the answer on my own; restart apple TV and menus no longer appear over videos and while playing music.  However, viewing streaming video on airplay is not ideal.  Sometimes the image freezes on the TV while it continues on my macbook.  Also, sometimes the sound comes from the tv speakers; other times it comes only from the computer.  Never know what will happen when I watch a streaming video. 

  • Creative NX Ultra Problems. Image Freezing & USB Problems

    I have just bought the NX Ultra Webcam and I am facing some problems.
    The installation went ok, except for a small error. But the two basic programs seem to work fine.
    After the installation, I have noticed that when using the Creative Software the image freezes after a while and the camera get disconnected.
    After I have noticed this problem, I have started to look over the internet, and many people are facing the exact same problem. However, I have read a hint about upgrading the Bios.
    I have done that and the problem with the Creative Software is over. The camera works for hours, with no freezing image.
    However, then I decided to start to use MSN Messenger The problem is now back. After a while, the image freezes and the camera get disconnected.
    And now I am facing a more serious problem. When I try to connect any USB device I got the hard disk light on for ages and the computer freezes.
    Does anyone have any idea what might be going on?
    Tonight I will try to uninstall the drivers from the camera. I will use a clean sweep as advised in this forum.
    But as far as I can realize, due to several similar problems that users are facing, I think we are in front of a major incompatibilty problem that must be addessed as soon as possibile by Creative.
    Regards,
    Marcio.

    I had the same problem with the Webcam Live! Ultra. Having tried everything creative suggested and uninstalling, reinstalling latest drivers and software for everything I own I even tried a fresh install of Windows XP Professional..but all I got was the same black screen.
    So, I went into my BIOS and disabled my USB 2.0 Controller thus leaving only my USB . Controller enabled. Now I get an image perfectly fine! Shame I have to run my USB at slower speeds, but at least everything works. Maybe a future Creative Webcam driver or VIA USB driver will fix the problem, or maybe I will just have to wait until I upgrade my motherboard to have full USB 2.0 support.
    Anyway, I hope this helps!
    DAN

  • In imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

    in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

    in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

  • Why is my image showing up as a clip of 8 repeating images, rather than a single image?  It does not show up 8 times in the movie, only in the editing screen as a clip with torn edges.  This hasn't happened before.

    In the past, when I moved an image from the frame where I would store all the media I may want to use in a particular project, to the upper frame where you create the project, the image would only show up as a single frame.  Now, it is showing up and looking more like a video clip, repeated 8 times and with a "torn edge" at the end.  When I play the image, it only shows up a single time.  I am not able to edit each frame individualy.  The Ken Burns icon only appears in the upper left corner of the first image.  I must have accidently changed a setting somehow, but don't remember doing this.  While the quality doesn't seem to be affected, it is taking me much longer to go back through the images and crop/fit them. 
    I am using imovie '08 and would consider myself an extreme novice. 

    I should clarify, when I meant I can only edit the first image, I don't mean only the first image of the project, but rather the first image of the 8 repeats. 
    I should also add that the project didn't begin this way.  I added enough images and then put the first song on.  When I started adding the photos that would be shown as the next song played, that is when they showed up as repeats of 8 AND all the previous images did the same.  That is why I am thinking I changed a setting when I added the music, but if I did, it was done accidentally and I can't seem to back track and find what I did.

  • If I want to make a single-frame importer, e.g. - for WebP image format, do I need to implement an SDK importer plugin? Are there any examples?

    The title says it all really. Was wondering if there's a simpler interface to implement which does not contain video or audio, but just a still frame image.
    I don't care about exporting this format from Premiere, just being able to read a single frame or a sequence of frames to be used as footage.

    Hi Rotem,
    A standard importer plug-in is the way to go for a still image importer.  You could start from SDK_File_Import in the SDK.  There is also a WebM plug-in on GitHub:
    fnordware/AdobeWebM · GitHub

  • Problem with AppleTV (freezes the image on some movies)

    Hi! I'm having some problems with my new appletv. I have some movies who freezes the image when I was watching it. Always stop the image on the same frame but when I check it on my imac with itunes I can see it without problems. Someone knows where is the problem?

    Hi, thanks for your reply. It happens in a boxing combat fight and in a Dexter episode. I convert it to .m4v (appletv format) and I can see it perfect in itunes on my imac but on my appletv it freezes always in the same frame. I copy the movie to itunes and after I sync and copy it to my appletv. Is weird cause I saw the Dexter episode 1 and 3 but the 2 freezes on 20min.

  • Im trying to make a simple 360 rotation for a 3d logo in CC 2014 but when i tried to create the 1st key frame the image when out axis

    im trying to make a simple 360 rotation for a 3d logo in CC 2014 but when i tried to create the 1st key frame the image when out axis

    I find that if you have multiple 3d object  they must be merged into a single 3d layer their positions reset to align to the same axises then sized and positioned along them. The layer should then be able to be animated well around an axis like the y axis. Here a Sphere, Cylinder and ring. http://www.mouseprints.net/old/dpr/McAssey-CC.mp4

  • Capturing a single frame to make a still image

    Hello,
    I'm not sure how Apple terms this so I wasn't able to locate it in the Manual, but what I'm trying to do is a capture a single frame from our video so that we can turn it into a still image that we can use in our promotional material. Can anyone poing us in the right direction?
    Thanks.
    GN

    Recognize these images will be the same pixel dimensions as your original footage - e.g. DV = 720x480 (or 640x480 square pixels).
    If you plan on doing this regularly and need good quality large images for print, it is very useful to have someone hanging around the set to shoot stills. Most video just looks awful when transformed into stills ...
    good luck.
    x

  • Make the link from the single cell of Bex Report and the image of bill

    Hi guys,
    my client scan every bill and archive the image by File.net technology.
    In our Bex Report we have the Bill number and we want to make the link from the single cell and the image of bill.
    The possible paths to solve the problem are:
           Replicate the image in BW and crate a link from the single cell and the image of document.
           Create an URL link from the single cell and the image of document archived on File.net server.
    In witch way we can to implement the two paths?
    Thank you.
    Alessandro

    Hi Alessandro,
    Have you seen "How To…Enhance your Web Query with the Table Interface"?
    You can find it in media library:
    https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044
    Best regards,
    Eugene

  • What's the simplest way to export a single frame from an animated gif as gif?

    i have an animated gif and wish to save a single frame as a non-animated gif.
    in the past i've been achieving this by deleting all the frames i don't wish to export and deleting them before exerting, this seems very clumsy though so i figure there's a more sensible solution in there somewhere, but where?

    Thanks, Bill! Actually version 9 looks a little clearer than that, as it has two bold clear white paddles to mark the edge of the work area.
    I was a little frustrated at first, because whatever I did, it still took a year and exported the entire video.
    Then:
    I caught sight of this teeny tiny box waiting for a tick from me, which said:
    Share Work area Bar Only
    We have lift-off 
    Thanks again. So much quicker than all that deleting ahnd hoping you don't accidentally say "yes" when prompted to save changes!

Maybe you are looking for

  • Ipod not recognized by my computer or itunes

    Just picked up a 8gb nano today, and my computer and itunes will not recognize it. The ipod charged completely off of my USB port. I have tried all of apple's suggestions on the support site, but they have not worked for me. I plugged it into my room

  • Error in SCCL on ECC 6.0 system

    Hi, I am trying to copy client 350 from 000. BD54 and SCC4 completed, the test run shows the below error , Error: Table FMATGRED30000001 error in DDIC - Check table with SE14 The data object could not be created: The type FMA TGRED30000001 does not e

  • Itunes Wont Load videos onto Ipod

    hi, i currently have a 60GB ipod video, and now itunes is refusing to load any videos onto my ipod, i tried so many different programs to convert video, eg videora, PQ DVD, and Replay converter etc. and i get the same error, it says video was not cop

  • IPhoto crashing in Edit mode

    Every time I open a photo in Edit mode and then try to move to another photo, either by clicking the "next" arrow or by clicking on another photo in the bar at the top of the screen, iPhoto simply crashes. Any ideas why? I only have 256mb of memory,

  • Stop Enter key for acting in a JTable

    I am having some problems with scrolling because of the Enter key. I there a way to override or stop the enter key from acting in a JTable?