The IMAP server wishes to alert you to the following: Mailbox is at 96% of quota
Mailbox is at 96% of quota...
What mail service do you have? I use Earthlink, and I check my mail by webmail often, and have a setting like this. You can go into your folders of Inbox and Sent Mail and delete stuff, especially mails with big attachments like pics or videos. You should see the percentage go down as you do. You will have to empty trash too.
Similar Messages
-
I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELPHi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support -
I cannot find any emails in my sent file exceeding the 20MB maximum and this message pops up every time the system replicates. Need to close it to continue working but it does not show me where the error is. I am using Windows 8
Hi,
In addition to Clark's advice, please refer to
http://www.itninja.com/blog/view/how-to-fix-large-or-multiple-files-attachment-problem-in-outlook
Important
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
I hope this helps.
Regards,
Melon Chen
TechNet Community Support -
Syncing mail to the imap server?
is there a way to tell os x mail to restore an item to the imap server if it doesnt exist on the server but it does exist in mail?
I’m still not sure what the problem is.
If Preferences > Accounts > Advanced > Keep copies of messages for offline viewing is set to All messages and their attachments (the default setting), then Mail 2.x maintains a local copy of server-stored mailboxes using the exact same format it uses for locally stored mailboxes, except the suffix of the mailbox folder in the filesystem is .imapmbox instead of .mbox.
You cannot import *.imapmbox mailboxes directly into Mail because when you do File > Import Mailboxes and choose Mail for Mac OS X as the data format, Mail looks for *.mbox folders only, but if Keep copies of messages for offline viewing was indeed set to All messages and their attachments when the backup of those mailboxes was made, you can easily overcome that limitation by just changing the suffix to .mbox:
1. Copy the ~/Library/Mail/IMAP-username@mailserver account folder from the backup to the Desktop.
2. Change the .imapmbox suffix of the folders within the account folder on the Desktop to .mbox.
3. In Mail, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions to import the copy of the account folder that’s on the Desktop. -
How do I disable the IMAP server?
<P>
If you want to use only the POP server, you can disable the
IMAP server by moving the executable from
$(ServerRoot)/bin/mail/server/network into
$(ServerRoot)/bin/mail/server/disabled.
<P>
If you decide to run the IMAP server later, you can just move
it back. The disabled directory does not exist by default on
and may need to be created.You can access an Exchange account as an IMAP account with the iPhone's mail client if IMAP account access is enabled for your Exchange account at the Exchange server.
You can also access an Exchange account via ActiveSync with the iPhone's mail client if ActiveSync is enabled for your Exchange account at the Exchange server. This provides Push access for the email account, and provides for over the air syncing for contact info and calendar events with the Exchange server. -
I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.
Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)? That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both? Or more?
I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details. The BT email client set-up starts here. -
Mapping Mail to the IMAP Server's sent mail folder.
In Mail, how do I tell my IMAP account what folder to store sent mail in on the IMAP server?
NOTE! I am not asking how to make it store on the server. I know if you go to a mail boxes preferences you can check a box that says "Store sent messages on server." I assure you that box is checked.
On my windows box I use Thunderbird, and with Thunderbird I have to manually tell it I want to store all of my mail in the subscribed folder entitled "sent-mail." This works fine. I can not figure out how to do this with Mail. I am assuming this is why my sent mail is not getting stored on the server.
Cheers,
ccerinojrClick on the Sent folder, then click Mailbox in the Menubar, place cursor on Use This Mailbox For, and choose Sent, which you should find in black type.
Keep us posted.
Ernie -
Connection to the imap server failed on WiFi
Hi -
Has anyone encountered this problem? All of a sudden, I am getting the following error message on my iPhone when I try to check my email (and am connected to my WiFi network): "Connection to the imap server failed." If I turn off WiFi, the connection works fine (using 3G). All settings are correct, and this has worked fine for almost a year before the problem started.
Any help on this would be appreciated. Thanks.
RobIf you truly tried everything there is no hope of ever making it work. But perhaps you missed something, so here are a few things (and if you've tried them...)
Reboot the phone by holding the HOME and SLEEP buttons at the same time until an Apple logo appears
Go to Settings/Mail,contacts,calendars, tap on a mail account. Make sure there's an entry for SMTP or Outgoing mail server (You may need to tap on Account to see the entry)
Tap on SMTP and make sure you have entered your email name and password (even if it says "optional")
If there's more than one server listed make sure the appropriate one for that account is the primary
If all of the above is correct delete the account, reboot the phone, and add the account back -
The IMAP server ... rejected the password for user ...
When I went to bed last night, Apple Mail (Lion, MacBook Pro) worked fine on my home IMAP server, as they have done for some time.
This morning, I cannot log in and I now get the following error message:
The IMAP server “...” rejected the password for user “...”.
The password is definitely correct. I have typed in the password repeatedly (although it was already correct) to no avail - I just get the same error message again.
Since then, I have tried:
my Linux laptop using Thunderbird
my Xoom (running Android ICS) and K9
my SGS2 (running Honeycomb) and K9
my iPad 2 using IOS Mail
Roundcube (webmail client) on the MacBook Pro itself (so no connectivity issues)
and all still work perfectly. There have been no changes to my mail server (which is Dovecot running on Debian Squeeze, which has been running flawlessly for years) and none to my MacBook Pro (unless they were silent).
I have tried deleting all the relevant items from my keychain, but that has made no difference either.
Any ideas because I'm stumped?Since I posted this, there has been more, but slightly different, weirdness.
In the middle of a session yesterday, Apple Mail started to do something different. When I typed in the password, it briefly worked (downloading one or two messages) and then the error dialogue box popped up again so clearly the password was always correct.
A short while later, it accepted the password and stopped complaining until ten minutes ago. This time I only had to type in the password once and it is working at the moment but who knows how long for? -
I am trying to download a new ebook that I bought on ebook.de (already did it before and never had problem) and this error message appears "ADE could not connect to the obtention server. Make sure you are connected to internet". I am connected to internet and my connection is quite good... I have no idea how to fix this problem. Can someone help me?
Hello,
Quickly you can do a check.
Open your browser
Type URL: https://adeactivate.adobe.com/adept/Status
Press enter
You should see something like:
If it says "UP", this indicates ADE will be able to contact activation server.
If not, then, maybe firewall is causing you this issue.
Thanks -
I have been getting this message on MAC OS 10.6.3 "Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again". Internet is working fine for everything else. Updating to 10.6.8 and applying all the security updates and patches [directly downloading from the apple website] has not resolved the issue. Read somewhere about a software update enabler for 10.6, installed it, but not helping.. [not sure of the update server settings to be entered] .Is there no way to make the software update work from the Apple Start Menu??
Problem solved.. Expired rules in Little Snitch caused the glitch
-
I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O. I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name: Application
Source: MSDPM
Date: 6/13/2011 1:09:12 AM
Event ID: 4223
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSDPM" />
<EventID Qualifiers="0">4223</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
<EventRecordID>68785</EventRecordID>
<Channel>Application</Channel>
<Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
<Security />
</System>
<EventData>
<Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
<Binary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inary>
</EventData>
</Event>
Any help would be greatly appreciated!Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress. -
Configuring the file server in KM and access,edit the documents from it
Hi friends,
My requirement is to configure the file server where u will have all the structured and unstructured data stored here. So users can share the documents and create, edit ,save the documents from the file server itself.
In KM what kind of file servers are there apart from the one it supports by default.
Can anybody pls provide the configuration steps regarding how to configure the file server i KM.
To configure the file server is webDAV protocol required?
Points would be assigned for the helpful answer.
Thanks in advance.
Regards
Sireesha.Dear Sireesha,
Well KM supports mostly all the File server however we have some restrictions with Novell FS and Sharepoint Server from Microsoft. Like versions and other meta data have some issues.
Alsothough to configure a File Server you need to first create a FS repository Manager. Details can be found in the help guide:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm">FS Repository Manager</a>
Yes WebDAV protocol is required here.
You can create WebDav RM as well.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm">WEBDAV</a>
The above links will help answer your queries.
Regards
Anjali -
I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT -
try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumartry
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif
Maybe you are looking for
-
Need quick advice: amex gold app
so i got an online offer for the 50000 points w/ amex gold. in the last two weeks i applied and was approved for cards w/ discover and citi. was satisfied and not planning to apply for anything else. until i got this offer. should i apply for the ame
-
How to back up a table in SAP?Is there tcode to use?
How to back up a table in SAP?Is there tcode to use? Please suggest me. Sai.
-
ITunes taking forever to burn a CD
I recorded a CD yesterday without any problem. today I have tried to burn another one and iTunes is taking forever, stuck at the stage of "finishing". The only thing i have done differently wat that i ticked the box to record CD track names today. iT
-
My profile on Windows 7 home is set to Administrator and always has been i.e. before iTunes was originally installed. I haven't backed my phone up in a while but found my 3GS stating that it needed to be updated before I could make any more calls.
-
The Navigator theme distorted up my Firefox layout
Some months ago I downloaded the "Navigator" theme on Firefox. From then on, every time I opened the browser, many of my regularly used website became distorted. Text in the content and in form fields would be tiny and was too small, so that I had to