The Import statement could not be resolved

We have are modifying standard MSS application through NWDI .
But when we create project we are getting error
Error: Could not load
import com.sap.xss.hr.eeprofile.archiveddocuments.vac.wdp.IPrivateArchivedDocumentsView;
MSS component is of SP 8 while portal components are on SP11. We are using Developer Studio with SP 11.
Please suggest.
Regards,
Sudhir

Hi Sudhir,
have u check that all the required jars are available for the project??
regards
Sumit

Similar Messages

The import Alert could not be found sdk 4.5.1 ????

For some reason I switched my sdk in compiler options to 4.5.1 and most of my classes are not recognised in the import statements
import mx.controls.Alert;
import mx.controls.TextInput;
import mx.events.FlexEvent;
import mx.formatters.DateFormatter;
The import Alert could not be found.
The import DateFormatter could not be found.
etc
what is going on friends?

Hi,
Can you open your project properties and check in Flex build path if under current SDK node "mx.swc" is listed in SDK libraries (it should if project is configured for 'MX + Spark' component set)?
regards,
Peter

Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...

Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Failed to verify gateway status. The remote name could not be resolved: 'machinename' Office 365, Power BI

Hi
I am trying to setup a Power BI On Premise datasource at a client site.
I successfully installed the Data Management Gateway (DataManagementGateway_1.2.5303.1_en-us (64-bit)) software on a Windows Server 2012 box and created the Gateway on the Power BI Office 365 site.
The Gateway is running correctly with no errors. When trying to setup the Datasource I get an error. As soon as I try to set the credentials the following message appears.
Failed to verify gateway 'GatewayName' status. The remote name could not be resolved: 'servername.domainname.net’
The servername which is returned in the error message is exactly the name which the DMG was installed on.
There is a firewall in place with a proxy server and I don't know if this might cause the problems. The
following website suggests adding the proxy settings in the config files of the DMG but this did not solve the problem.
The above setup process works perfectly when running the DMG from my laptop, connecting to a Gateway and creating a DataSource connecting to SQL Server.
Any assistance would be appreciated.

HI
Thank You for the reply.
I resolved the issue in the mean time. I was on laptop which does not belong to the domain.
When setting up the datasource you should be on the same domain as the datasource as per the below post.
http://sharepoint-community.net/profiles/blogs/connecting-office-365-to-on-premises-data
Regards, Drickus

Alchemy for xfi - the product state could not be determined (error 6

as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

Cannot Create New Share from Azure PowerShell - The remote name could not be resolved

I have created a storage account. It seems that there isn't a specific way to create file storage rather than blob storage.
I followed the instruction for creating a share in Azure Power Shell but when I try $s=New-AzureStorageShare... I keep getting the error "The remote name could not be resolved". I checked the account name and it matched what is shown on the
Azure site.
I also cannot access the storage from the URL's. I get the message "This page can't be displayed.
How can I create a file storage account and a share to it?
Thanks,
Glen

Hi Glen,
Thanks for your post!
Did you sign up your File Service ?
To sign up, go to the Microsoft Azure Preview Portal, and sign up for the Microsoft Azure Files service using one or more of your subscriptions. As subscriptions
are approved for the Azure File preview, you will get an email notifying you of the approval. We will be slowly opening up the service to users in batches, so please be patient after signing up.
After sign up and enable this feature, I suggest you could refer to this blog for how to use Azure File service (
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx#faq7 ).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved.

I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved in server 2012 R2.
I have configure Ad and ADFS different server and try to configure web application proxy different server. what setting are required for connect web application proxy to Ad and ADFS.

Hi,
In addition, please make sure that the port 443 is not blocked by the firewall.
Web Application Proxy requires internal name resolution to resolve the names of backend servers, and AD FS servers. When publishing web applications via Web Application Proxy, every web application you publish requires an external URL. For clients to reach
these web applications, a public DNS server must be able to resolve each external URL that you configure. Note that the external URL must resolve to the same IP address as the Web Application Proxy server, or the external IP address of a firewall or load-balancer
placed in front of the Web Application Proxy server.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Azure File Storage error The remote name could not be resolved

I am following http://azure.microsoft.com/en-us/documentation/articles/storage-dotnet-how-to-use-files/
While executing $s = New-AzureStorageShare mysampleshare -Context $ctx I get error as
New-AzureStorageShare : The remote name could not be resolved: 'mystorageaccount.file.core.windows.net'
At line:1 char:6
+ $s = New-AzureStorageShare elasticsearch -Context $ctx
+      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: (:) [New-AzureStorageShare], StorageException
    + FullyQualifiedErrorId : StorageException,Microsoft.WindowsAzure.Commands.Storage.File.Cmdlet.NewAzureStorageShare
Thanks,
Subodh

Azure Files is a Preview feature. Did you request and got access to it at the billing portal's Preview Features (https://account.windowsazure.com/PreviewFeatures)?
Also, you can now try creating the File share via the Preview Portal (https://portal.azure.com -> your storage account -> "File Shares").

The remote name could not be resolved

We are running Office 365 Power BI (as a trial) and published our data through the data manager gateway service.
We are able to retrieve a list of shared tables / views through Power Query in Excel 2013 Professional Plus.
However, when clicking on edit on any table returned we get this error in the Power Query window:
DataSource.Error: OData: Request failed (NameResolutionFailure):
The remote name could not be resolved: 'SERVER-NAME.DOMAIN.local'
Details: https://POWERBISITE.hybridproxy.powerbi.com/ODataService/v1....
I have tried configuring the Data Manager Gateway service to run HTTP (at first) and HTTPS.
Could this be a port number issue? Or what else?
Appreciate any help, Thank you
Ian

Hi intrasight,
I gave the hosts thing a try.
I was getting 'unable to resolve' errors in attempting to use Power Query in a small stand-alone test domain (all computers are in the domain, and in this little LAN). So I edited
hosts in C:\Windows\System32\drivers\etc
I added this line:
192.168.0.4 mycomputer.ad.mydomain.com
mycomputer is the name of the computer running the Data Management Gateway, and
ad.mydomain.com is the name of the domain.
Now, I get
<textarea class="role-selectableText" cols="1" readonly="readonly" rows="1" style="width:659px;height:87px;" tabindex="-1">DataSource.Error: OData: Request failed: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS
secure channel. Details: https://mydomain.hybridproxy.powerbi.com/ODataService/v1.0/mydatasource</textarea>
Which tells me that hosts on the client is indeed now resolving the name/IP correctly, and Power Query is finding the DMG directly (rather than via the
hybridproxy.powerbi.com cloud service).
But that's terrible!
A) I shouldn't need to use hosts since
B) the hybridpproxy cloud service is finding the DMG on my database machine (because the Test Connection works OK)
C) but without hosts the client Power Query says that "The remote name could not be resolved"
DataSource.Error: OData: Request failed: The remote name could not be resolved: 'mycomputer.ad.mydomain.com'
Details:
https://mydomain.hybridproxy.powerbi.com/ODataService/v1.0/mydatasource
There's no way an actual production system should require editing
hosts on all client machines.
So to my mind, the original question is still outstanding.
How do I get Power Query to resolve the remote name?
Cheers, Donna
Donna Kelly

The Autodiscover service could not be located

I am developing small EWS client. For initial testing I wrote simple code:
service = new ExchangeService(ExchangeVersion.Exchange2007_SP1);
service.Credentials = new WebCredentials("[email protected]", "password");
service.TraceEnabled = true;
ServicePointManager.ServerCertificateValidationCallback = CertificateValidationCallBack;
service.AutodiscoverUrl("[email protected]");
I included CertificateValidationCallBack method from
this MSDN page.
I have two Exchange servers. For one exchange server this code worked fine for sending a new email.
However on another server I got following exception:
The Autodiscover service could not be located
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetLegacyUserSettings[TSettings](String emailAddress, List`1 redirectionEmailAddresses, Int32& currentHop)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetLegacyUserSettings[TSettings](String emailAddress)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetLegacyUserSettings(String emailAddress, List`1 requestedSettings)
at Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetUserSettings(String userSmtpAddress, UserSettingName[] userSettingNames)
at Microsoft.Exchange.WebServices.Data.ExchangeService.GetAutodiscoverUrl(String emailAddress, ExchangeVersion requestedServerVersion, AutodiscoverRedirectionUrlValidationCallback validateRedirectionUrlCallback)
at Microsoft.Exchange.WebServices.Data.ExchangeService.AutodiscoverUrl(String emailAddress, AutodiscoverRedirectionUrlValidationCallback validateRedirectionUrlCallback)
at Microsoft.Exchange.WebServices.Data.ExchangeService.AutodiscoverUrl(String emailAddress)
at EwsDctmSyncer.Test.Main(String[] args) in C:\ewswork\csws\EwsTest\EwsExp\Test.cs:line 21
at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
When I look at the traces on console, I found this main problem:
failed: WebException (The underlying connection was closed: Could not
establish trust relationship for the SSL/TLS secure channel.)
However I dont understand what could be wrong with this second instance of Exchange Server. Can anyone pin point what could be wrong. I am puzzled since to my knowledge both the instances are similarly configured.
Added full trace as a reply to this post.

Full Exchange Service Trace:
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Starting SCP lookup for domainName='domain1.com', root path=''
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Searching for SCP entries in LDAP://CN=Configuration,DC=domain1,DC=com
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Scanning for SCP pointers Domain=domain1.com
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
No SCP pointers found for 'Domain=domain1.com' in
configPath='CN=Configuration,D
C=domain1,DC=com'
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Scanning for SCP urls for the current computer Site=Default-First-Site-Name
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Adding (prio 1)
'https://exchangeserver.domain1.com/Autodiscover/Autodiscover.xm
l' for the 'Site=Default-First-Site-Name' from
'LDAP://CN=exchangeserver,CN=Auto
discover,CN=Protocols,CN=exchangeserver,CN=Servers,CN=Exchange
Administrative Group (adminGroup),CN=Administrative Groups,CN=domain1,CN=Microsoft
Exchange,
CN=Services,CN=Configuration,DC=domain1,DC=com' to the top of the list (exact ma
tch)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:33Z">
Trying to call Autodiscover for [email protected] on
https://exchangeserver.domain1.com/Autodiscover/Autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:33Z">
POST /Autodiscover/Autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverRequest" Tid="9" Time="2013-12-16 15:40:33Z" Version="15.00.0516.014">
<Autodiscover
xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/requestschema/2006">
<Request>
<EMailAddress>[email protected]</EMailAddress>
<AcceptableResponseSchema>http://schemas.microsoft.com/exchange/autodiscov
er/outlook/responseschema/2006a</AcceptableResponseSchema>
</Request>
</Autodiscover>
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:46Z">
failed: WebException (The underlying connection was closed: Could not
establish trust relationship for the SSL/TLS secure channel.)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:46Z">
Trying to call Autodiscover for [email protected] on
https://domain1.com/aut
odiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:46Z">
POST /autodiscover/autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
failed: WebException (Unable to connect to the remote server)
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to call Autodiscover for [email protected] on
https://autodiscover.domain1.com/autodiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverRequestHttpHeaders" Tid="9"
Time="2013-12-16 15:40:47Z">
POST /autodiscover/autodiscover.xml HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.014
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
failed: WebException (The remote name could not be resolved:
'autodiscover.domain1.com')
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to get Autodiscover redirection URL from
http://autodiscover.domain1.com/
autodiscover/autodiscover.xml.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Request error: The remote name could not be resolved:
'autodiscover.domain1.com'
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No Autodiscover redirection URL was returned.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
Trying to get Autodiscover host from DNS SRV record for domain1.com.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
DnsQuery returned error error 'DNS name does not exist' error code 0x0000232B.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No appropriate SRV record was found.
</Trace>
<Trace Tag="AutodiscoverConfiguration" Tid="9" Time="2013-12-16 15:40:47Z">
No matching Autodiscover DNS SRV records were found.
</Trace>

"WARNING: loghost could not be resolved."

Hello:
When I boot Solaris 10 on an x86 machine I receive the following message:
"console login: Syslogd: line 24: WARNING: loghost could not be resolved."
Would someone please assist in this matter. Thank you.

It does exactley what it says on the tin.
The log host could not be resolved!. In english solaris is looking fot the machine that you have setup as the loghost(usally a remote machine), and cannot find it. :)

Remote name could not be resolved in App but MobileService project connects ok

I have a mobileservice project that runs fine as a Web client. But if I use the MobileServiceClient reference in my Universal app I get "The remote name could not be resolved".
In the client Phone app written in c#, I have the auto-generated MobileServiceClient in App.xaml.cs. Then I get a reference to IMobileServiceTable using App.myClient.GetTable call to get a reference to service table. Afterwhich I make a call
List<MyData> items = await myClientDataTable.Where(
MyData => MyData.Id == 'some id'
).ToListAsync();
The error 'The remote name could not be resolved'. Which doesn't seem right as the mobileservice project runs fine as a Web client. By web client I mean, if I F5 on the MobileService project it runs in the
web browser where I can add and retrieve data.
Any help appreciated!

T.,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

There are about 8 songs in a playlist on itunes that are listed in the playlist but cannot be transferred to my ipod because it states: "..the original file could not be found." When I try to locate the song I get a list of the different music librar

There are about 8 songs on a playlist that are listed in the playlist library but when I try to transfer them to the playlist, it states that they can't be transferred because the original file could not be found. Then it asks, do you want to locate the file but when I try that I get a few libraries but am not sure how to locate the particular songs. Some of the songs were purchased and some were transferred from a CD. I have seen the same question asked on the help page but haven't found an answer.
Thanks.

Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L

Error: The report source could not be retrieved from the state object.

I have been trying to create a report in a JSF page. The relevant parts are below:
Inside the JSP page, this is the code:
              <jsp:useBean id="MyBean" class="com.nm.facade.rto.POJOViewerBean" scope="session" />
                <jsp:setProperty name="MyBean" property="reportLocation" value="Report1.rpt" />
               <v:reportPageViewer reportSource="#{MyBean.reportSource}"
                                       displayToolbarPrintButton="true"
                                       printMode="ActiveX"
                                       zoomPercentage="100"
                                       displayToolbarExportButton="true"
                                       displayToolbarRefreshButton="true"
                                       viewerName="My Viewer"
               ></v:reportPageViewer>
In the backing bean, this is the relevant code:
    public Object getReportSource() throws ReportSDKException
        if (propertiesChanged || reportSource == null)
            propertiesChanged = false;
            if (reportLocation == null)
                throw new RuntimeException("The reportLocation property must be set before a report source is retrieved");
            ReportClientDocument rcd = new ReportClientDocument();
            rcd.setReportAppServer(ReportClientDocument.inprocConnectionString);
            rcd.open(reportLocation, 0);
            DatabaseController dbc = rcd.getDatabaseController();
            //Create the POJO collection and populate it with data
            ReportData[] data =
              new ReportData("B.B.", "King", 6, new Date(25, 9, 16)),
                new ReportData("Muddy", "Waters", 7, new Date(15, 4, 4)),
                new ReportData("John Lee", "Hooker", 8, new Date(16, 8, 16)),
                new ReportData("Otis", "Rush", 9, new Date(34, 4, 29)),
                new ReportData("Buddy", "Guy", 10, new Date(36, 7, 30))
            //Create the result set from the collection of POJOs
            POJOResultSetFactory factory = new POJOResultSetFactory(ReportData.class);
            factory.setVerbose(true);
            POJOResultSet results = factory.createResultSet(data);
            ResultSetMetaData metaData = results.getMetaData();
            //Set the resultset as the report datasource
                  //Get the table name from the 'Set Datasource Location' dialog in the Crystal Reports designer
            String reportTable = "getReportDataDataSource";
            dbc.setDataSource(results, reportTable, reportTable);
            IReportSource reportSource = rcd.getReportSource();
            if (reportSource == null)
                throw new RuntimeException("Unable to get a report source.");
        return reportSource;
In the CRConfig.xml, this is what is there:
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
    <reportlocation>../reports</reportlocation>
    <timeout>0</timeout>
    <ExternalFunctionLibraryClassNames>
         <classname></classname>
    </ExternalFunctionLibraryClassNames>
</CrystalReportEngine-configuration>
The report template 'Report1.rpt' is packaged under WEB-INF/reports in the war file.
When I try to generate the report by accessing the JSF page, I am getting an error: "The report source could not be retrieved from the state object. "
I am not sure what is wrong. Can someone help me in resolving this issue?
Edited by: renshai on Jul 9, 2009 3:21 AM

My formatting gets lost and the message looks unintelligible. After some experimentation, I found that if the message exceeds some length, the formatting is removed. Since I couldn't find any way to delete this post, I made another post with the same subject. Please ignore this post and help me to find a solution for the problem posted in the other thread with the same subject. Thanks in advance.

How to solve the error: "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John

The Import statement could not be resolved

Similar Messages

Maybe you are looking for