The import sun.text.resources.LocaleData can't be resolved

I'm in the process of upgrading WAS6.1 to WAS7.0
FOr that I'm upgrading JSF1.1 to JSF 1.2. suddenly I started seeing 'The import sun.text.resources.LocaleData' can't be resolved..
any ideas around that would be appreciated..

Please post your question only once. Posting multiple times is rude, as it leads people to waste their time duplicating each others' answers.
'The import sun.text.resources.LocaleData' can't be resolved..
The import sun.text.resources.LocaleData can't be resolved

Similar Messages

I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
ps: i'm hopeless.

So what you want is for it to say Lebanon (English)? If so, see if this helps:
http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

Elements 11 opens in the Import Media Screen. How can I access setting to make it open in the original Organizer / Photo Editor screen?

Elements 11 opens in the Import Media Screen. How can I access setting to make it open in the original Organizer / Photo Editor screen?

Elements 11 opens in the Import Media Screen. How can I access setting to make it open in the original Organizer / Photo Editor screen?

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved.

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

The import org.apache.struts.action.ActionError cannot be resolved

Hai anyone,. I' a newbie to struts and want to learn more. I download the example code, and run it. Hey, it work. But when I try to create it by myself by following the tutorial, I got stuck with my all java file when i want to try to compile it with eclipse.It say:
The import org.apache.struts.action.ActionError cannot be resolved
What' wrong?
this is one of the example code, i bolded the error line:
package dummies.struts.music;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionError;
import org.apache.struts.action.ActionErrors;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import org.apache.struts.validator.DynaValidatorForm;
* @author Mike Robinson
public class LoginAction extends Action
     * Handles request from user
     * @param mapping
     * @param form
     * @param request
     * @param response
     * @throws Exception
     public ActionForward execute(      ActionMapping mapping,
                                             ActionForm form,
                                             HttpServletRequest request,
                                             HttpServletResponse response)
                                             throws Exception
          // did the user click the Join button?
          Boolean bCancel = (Boolean)request.getAttribute("org.apache.struts.action.CANCEL");
          if(bCancel != null)
               if(bCancel.booleanValue())
                    return (mapping.findForward("join"));
          // create a new LoginBean passing the datasource
          LoginBean lb = new LoginBean(getDataSource(request, "musiccollection"));
          // check to see if this user/password combination are valid
          // will return a non-null UserDTO if valid
          UserDTO user = lb.validateUser((String)((DynaValidatorForm)form).get("email"),
                                             (String)((DynaValidatorForm)form).get("password"));
          if(user != null)
               // save UserDTO in session
               request.getSession().setAttribute("user",user);
               return (mapping.findForward("success"));
          else     // username/password not validated
               // create ActionError and save in the request
               ActionErrors errors = new ActionErrors();
               ActionError error = new ActionError("error.login.invalid");
               errors.add("login",error);
               saveErrors(request,errors);
               return (mapping.findForward("failure"));
}

Hi i try to build a dynamic web project in eclipse europa version.so i have opned my eclipse editor then right click selected the dynamic web project.onceit is done i wated to add the servelt so i have selcted the sevlet pressed ok then given name for it,next create servlet here iam getting the error lke this
"An error occured when create servlet is finished" and in deatils it displyainf like thi
"java.lang.Error: Unresolved compilation problems:
     The import org.eclipse.jst.j2ee.internal cannot be resolved
     CreateServletTemplateModel cannot be resolved to a type
     CreateServletTemplateModel cannot be resolved to a type
     at org.eclipse.jst.j2ee.web.ServletTemplate.<init>(ServletTemplate.java:3)"
can any one help me here i have been stuck from morning doing nothing try to solve this problem
thank u in advance
vijay

I want to change my password for apple id but i forgot my secrect question as well as the email add that apple sends the reset link to. How can it be resolved ?

I want to change my password for apple id but i forgot my secrect question as well as the email add that apple sends the reset link to. How can it be resolved ?

See Kappy's previous write-up.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

What is the importance for text determination in sap sd

hi,
what is the actual relevance of text determination procedure.
if configured where it will have its triggerring effects in s&d documents.
regards,
balajit

Hi Balaji,
Text determination helps to copy over text obects from the customer,vendor ,material etc onto sales and shipping documents. For example if there is some material specific instructions to be carried over to the sales order , we can use text determination to get the material text stored in master level onto the item texts on the sales order. This will also move onto the delivery once created thus giving visibility for specific instructions to the warehouse or to all people further down the chain.
Text determination can also be used to move all sorts of other information too onto the sales documents..Hope that helped..
Cheers,
Sandeep.

After a crash with Win XP Professional, I am missing all the important Profile files. How can I recover passwords and history if the key3.db and places.sqlite files are not shown in the profile folder?

I only have a large urlclassifier3.sqlite file in the old default profile folder. Help!

Sounds like boot sector corruption to me! I suggest you download Testdisk a product of CG Security. Use the latest version that is NOT beta. Boot the computer to a bootable CD such as Hiren's Boot CD. Run the DOS version. Do NOT write anything to the hard disk, such as a log! Do a deep search for lost partitions. When given the opportunity, look at files and folders. Finally, do a rebuild of the boot sector, and compare that to the current boot sector and backup sector. The write a verified version of the boot sector back to the hard disk. Note: Testdisk 6.11.3, under DOS, will show DELETED FILES IN RED. You can then OFFLOAD them to another drive or USB stick. Good luck.

Can you find the imported Library ? My system can't !

Dear People,
In making a first attempt to do an applet in JBuilder7 rather
than from the Dos prompt my imported library is not being found . Here are the steps I did.
1) deleted all the premade source code on the scrren and
keyed in my applet code "MakeBox.java"
2) went to Tools | Configure Libraries
I saw on the left "User Home " and under that i saw
"objectdraw"
3) under the class tab I saw:
[ C:/WINDOWS/jbproject/objectdraw.jar ]
4) at the Required Libraries tab I saw:
"objectdraw"
the error message I get when I try to compile the class is:
"MakeBox.java": Error : cannot access directory objectdraw at
line 6
below is the source code
Thank you in advance
Stan
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import objectdraw.*;
public class MakeBox extends WindowController
public void begin()
public void onMousePress(Location point)
new FilledRect(30,150,30,20,canvas);

I don't know if this is your problem or not, but whenever JBuilder decides it doesn't like me I usually have to go do this:
1)Project Menu
2)Project Properties
3)Paths tab
4)make sure your working directory is right
5)get rid of the /test in the path of the second radiobuttoned option
maybe that will help, maybe not...its what I do and it usually work.

My macbook pro won't connect to one of my internet connections, it did in the past but not now. Can't be resolved with airport diagnostics. Help would be appreciated

I have tried so many times to resolve the problem and I have no idea what's up. I disconnected my modem and all of a sudden my macbook won't connect ever since. The only way to get on is to use an ethernet cable.

have you tried telling your computer to forget the network and then trying to reconnect it that way?

Mavericks doesn't stack documents in the dock like mountain lion did. can this be resolved

I notice that Mavericks doesnt stack or fan documents like mountain lion did. Is there are way to change this

Hold the control key and click your folder to edit settings.
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3

Where exactly can i download the com.sun.j3d.*?

where exactly can i download the com.sun.j3d.*?
can anyone provide a complete download website for me?

but still couldnt get what i really want?Well, the first link takes me straight to Sun's 3D download page... so I'm confused.
What do you "really want" then?
And PS: Type whole words FFS... SMS speak shits me.

Importing a text file with variable values into web reporting

Hello,
I'm looking for a possibility to import values from a text file into a variable selection in Web reporting.
With BEx reporting in Excel this is possible, by clicking on the multiple selection button in the variable popup screen, and subsequently selecting the "Import from Text file" button.
However, this function seems not to be available for web-reporting...
It would be great if someone could help me out with this!
Thanks & regards,
Arvid

Hi,
we could resolve this issue, so i thought it may also be helpful for others:
In our example we used a file with numbers for materials. This file is stored somewhere in a directory, to which SAP BI must have authorization to read.
The file looks something like this:
4711
4712
4713
4714
The file is named "import.txt" and lays in directory "/usr/sap/EC6/files/bi/"
*& Include           ZXRSRU01
* global variables
Data: intern_range LIKE LINE OF i_t_var_range,
      l_s_range    TYPE rsr_s_rangesid,
      line(100)    TYPE c,
      p_file(128) TYPE c,
      length_rangelow type i,
      tmp_rangelow     like l_s_range-low.
* internal tables for selection-transfer from transaction
* Data: BEGIN OF it_file occurs 0,
*        it_p_file(128) TYPE c,
*      END of it_file.
IF i_step = 1.
** variables can be changed or set before pop-up appears
CASE i_vnam.
* take material from external file to selection-list
     WHEN 'ZSD_UPMA'.
** call of transaction, with which the path can be set
*CALL TRANSACTION 'ZBW_VARIABLE' using it_file
*MODE 'A'      " call should be visible, so that variable can be set
*UPDATE 'S'.   " first transaction, then processing
** Der Pfad, der in dem Selektionsbild eingegeben wird, wird an die Variable übergeben
** Der Set-Parameter ist in Report ZSD_SELECT_VARIABLE
* get parameter id 'VAR' field p_file.
p_file = '/usr/sap/EC6/files/bi/import.txt'.
* further handling of variable in BI
      OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc = 0.
        READ DATASET p_file INTO line.
        WHILE sy-subrc = 0.
          IF line(2) <> '//'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            l_s_range-low = line.
* fill with leading Zeros
* in variable tmp_rangelow the value from l_s_range-low is taken
    tmp_rangelow    = l_s_range-low.
* read the length
    length_rangelow = strlen( tmp_rangelow ).
* in our case: material has 18 characters
    while length_rangelow lt 18.
      CONCATENATE '0' tmp_rangelow INTO tmp_rangelow.
      length_rangelow = length_rangelow + 1.
    endwhile.
* initialize l_s_range-low
    clear l_s_range-low.
* set with filled values
    l_s_range-low = tmp_rangelow.
* transfer to structure
            APPEND l_s_range TO e_t_range.
          ENDIF.
          READ DATASET p_file INTO line.
        ENDWHILE.
      ENDIF.
      CLOSE DATASET p_file.
    ENDCASE.
ELSEIF i_step = 2.
** in step 2 all variable values from pop-up input can be processed or
** User Exit variables can be derived
* UserExit Ende.
ENDIF.
Hope i could help!
Best regards,
Tobias

Unable to see the imported files in ODI after executing my java program

Hi,
I am using the following java code to import the physical topology into ODI11G.
===========================================================================
ImportServiceImpl importService =
new ImportServiceImpl(pOdiInstance);
importService.importTopologyFromFolder(importService.IMPORT_MODE_SYNONYM_INSERT_UPDATE,FolderPath, true);
===========================================================================
The above code went through fine while executing my program.But, i can't able to see the imported topology in ODI.
Can you suggest me how to import the topologies as well as work repository into ODI through Java programming.
Thanks in advance,
Ganesh Kesavarapu

I would do that as a last resort, as it happens to be a client server, I don't think they'd appreciate me needing to reboot a Unix server during the day. Would anyone have any other suggestions?
I just removed the JSPs from the live server, and refreshed the page and Tomcat could not find the JSPs, so I'm sure I have the correct directory. I then made sure the .java and .class files were deleted from the work directory, uploaded my new files (again) and hit refresh... and yet again I was served the same code as always, when I view source it still shows me the old source code even though the JSP file and compiled java files and class show that the new file should be shown, not the old one.

What is the importance on BOM Explosiion number

Hi,
what is the importance of BOM Explosion number . can any one give me in detail in which context it is used.
second is valuation type is getting populated in components of a production order. from where this valuation type is flowing to the child components.
thanks in advance
madan mohan

Hi,
By means of Bom explosion number we can define a common explosion date for all BOM levels.
The system explodes the BOM that is valid on this date.
For multi level BOM lareger time intervals may exist between the explosion dates of individual assemblies.If the BOM's have changed mean time a situation may exist where by an assembly that is used repeatedly is produced with a different BOM structure.
Therefore the BOM should always be exploded with the same date.
Tcode MDSP
You need to enter fixed key date,plant material and the status whether active or inactive.
You can enter the BOM Explosion No in planned order or when creating PIR.
Regards,
nandha

The import sun.text.resources.LocaleData can't be resolved

Similar Messages

Maybe you are looking for