The importance of the Hyper-V setting in BIOS

What is the importance of the Hyper-V setting in BIOS?

Hi Philosophiae,
Could you clarify your question about the your question, I suggest you must want to know what the new “virtualized hardware of vm” in 2012R2 Hyper-V, you can refer the following
KB to know the improvement in Hyper-V 2012R2.
Understanding Generation 1 and Generation 2 Virtual Machines in VMM
http://technet.microsoft.com/en-us/library/dn440675.aspx
Generation 2 Virtual Machine Overview
http://technet.microsoft.com/en-us/library/dn282285.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Phase import abap (problem in the import of the export)

Hello!:
We are doing the IMPORT of the EXPORT (for the CU&UC), and has appears the next error in the IMPORT ABAP PHASE:
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "IBA3SAP\MIG "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "IBA3SAP"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x IA64 Level 31 (Mod 1 Step 5)"
(DB) INFO: ACCTIT created
(DB) INFO: ACCTIT~0 created
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: ACCTIT~1 created
(DB) INFO: disconnected from DB
M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe: job finished with 1 error(s)
M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe: END OF LOG: 20080409193447
Can you help me?
Thanks and regards,
Alfredo.

IMPORT_MONITOR.LOG
ERROR: 2008-04-09 19:34:48 com.sap.inst.migmon.LoadTask run
Loading of 'ACCTIT' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i ACCTIT.cmd -dbcodepage 4103 -l ACCTIT.log -loadprocedure fast' exited with return code 2.
For mode details see 'ACCTIT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-09 19:53:03 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_34' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL1_34.cmd -dbcodepage 4103 -l SAPAPPL1_34.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL1_34.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-09 22:08:11 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_67' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL1_67.cmd -dbcodepage 4103 -l SAPAPPL1_67.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL1_67.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-10 08:22:35 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0_17' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL0_17.cmd -dbcodepage 4103 -l SAPAPPL0_17.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL0_17.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

What is the importance of the tabs like vendor and customer in t.code md04

Hi All,
what is the importance of the tabs like vendor and customer in t.code md04? Could you please explain me...
Thanks
Krish

Hi Krish,
In MD04,you see requirement of material.
Whenever there is Purchase order & Sales order created,you will find relevent Vendor & Customer name respectively when you go for Vendor & Customer tab. When you double click on Vendor It shows you details of Vendor.
Just try & Check it.
Hope this help you.
Regards,
Raja.
Edited by: Raja on May 7, 2009 6:13 AM

Where is the "Import" and the Tools

Every three or four months I take LR4 out of mothballs, try it, and then put it back in mothballs. I click Library and can't find images and/or the "Image" button; if I import images, voila, suddenly the screen changes and the tools which were on the previous screen disappear when images appear for which they are needed.
Good ol' ACR gets the job done for me every time. The LR4 flim-flam interface just doesn't work for me.
MacBook Pro 15"
4GB
1T HD
OSX 10.8.3

I would agree with Rikk about the tv.adobe.com video tutorials.
There is also some very good information here:
http://helpx.adobe.com/lightroom/help/learn-lightroom.html
http://help.adobe.com/en_US/lightroom/using/WSC9E4E6EC-CF8D-4775-ABFD-F7D614FCB892.html
Also, when you have LR open and in the Library Module, click Help and select the second item down -- Library Module Tips. Clicking through the tips may help you understand the Library panels.
John

Messed up the pacman DB with wrong date set in bios [solved]

Solved by reinstallation and some searching around for a few hours.
Last edited by MoonSwan (2008-07-27 02:05:20)

WonderWoofy wrote:I think you may find relevant information here. I ahve seem many of these threads in the forums lately. Are you dual booting w/ another operating system... in particular, one that uses localtime for the hardware clock (and there is only one that does this).
Thanks I'll look at that entry. Still I'd like to point out that this page clearly says that the timezone is to be set in rc.conf, which is a bit confusing. I must've followed this guide to get to my current configuration. I am dual booting with multiple other systems (xubuntu, win7, puppy, crunchbang) so from what I've read win7 might be the problem, but I haven't started it since i installed arch and my time has been off from the start.
Should I simply use NTP now that pacman is working again?
Thanks
Last edited by miek (2012-09-03 17:41:56)

About the import at the page Tag

When i import some package at the Page directive, i still need to put the complete path to the class im planing to use. Example
<%@ page import = "pac.ImportedClass"%>
if i try to use it like this
<jsp:useBean id = "b" scope = "page" class = "ImportedClass"/>
it woun�t work
Cam please somebody explain what is that page import for?

page import affects scriptlets, not custom tags.

How do I import an existing cell number to SAMSUNG GUSTO 3 - Verizon Prepaid? What number do I call? Do I activate first and then request the import via the new Verizon (not wanted cell number)?

The enclosed ACTIVATION & USE MANUAL is very limited. It only tells you how to activate the phone after inputting a zip code. On the web there are many contact numbers for customer service but ALL REQUIRE a Verizon cell number.

A friend I know had this issue and was told to activate the phone first and then call *611. You also can dial from any other phone this number 1 888 294 6804 and choose 1. They both can handle the tranfer without any problem.

Whats the importance of the choice of distribution?

I am using the (excellent) linuxdistribution Gentoo Linux. Now I wonder if this (and other) distribution lacks something that Redhat or SUSE has got, since those two distributions are the only ones that are beeing discussed.
In other words: will the ORACLE linux products work on any standard linux distro, or has it been customized for RedHat/SUSE?
TIA

personally not getting you ass kicked too hard by management when it goes wrong is quite high on my list so i'd say support contracts
suse and redhat have oracle specific versions
redhat advanced server has tuning and replication filesystems

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

What are the important views or field in vendors master record

All,
We are converting two different companies into our SAP. We are at blue printing stage. I was assigned to gather vendor master data requirements in SAP. I sent them all the fields that we are currently using in SAP. I sent them a template of General, Company code data and purchasing views. The legacy team is coming to meet with our it team one to one to discuss the importance of the fields. Now my team manager asked us to submit a presentation about all the questions we should be asking the legacy team as well as the important information we should be discussing from SAP point of view. Can someone guide me here please. It's important.
Thanks,

Hi The task is pretty simple. You would need to create a mapping from the legacy data to SAP data. You would go through every field of the legacy data and identify which field it will map to. there is nothing like important field. Ideally you would get all the fields. Identify the recon account that the vendors should go to.
Hope this helps
Points will be appreciated.
Regards,
Zaid Azam

I am trying to use the new plug-in for import from aperture. But the "import" button always disappears ... any help out there?

Hi there
I have up-dated LR to the latest version and like to use the plug-in for the import from the Aperture library. I follow the steps suggested by an article, have saved all picture into separate folders (folder = project name) and still, after the analysis of the library, the "import" button disappears and I am stuck and can't import.
Any ideas what can be done/must be done to get this working?
Regards
Diethard

I am having the same issue, i've selected my Aperture library, and the "import" button does not activate. Any idea how to fix?

Import button (the exclamation point) is disabled in Import manager toolbar

Hi,
I am working with MDM and loaded catalogue into MDM import manager. I did Mapping fields/Values and table mapping in Import status tab shows "Filed mapped 30 of 30". But the Import button (the exclamation point) is disabled in Import manager toolbar to import this to data manager.
Thanks
Suri

Hi Suri,
Please refer my article "SRM-MDM Catalog Setup - Ready Reference".
The SDN link is attached below
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8?quicklink=index&overridelayout=true
Kindly refer "Import of supplier catalog" section.
Hope this helps.
Regards,
Vikas

Till now Aperture worked well in mavericks, "suddenly?" the import of raw files from Nikon D700 is no more supported, only jpg's are accepted. Any idea what happened?

Aperture (3.5.1) worked very well in Maverick (OSX 10.9). After having worked on pictures, "suddenly" messages poped up saying that "his os not a supported format" and the thumbnailpicture became black. Since then Aperture does no more accept the import of the Nikon D700 raw format (NEF); omnly jpg is accepted.
I'm very puzzeled, can you help?
Thanks,
Felix

Thanks, Felix. A tiny bit of RAW finetuning such as sharpening also helps.
But I also just discovered several other weird and unpredictable effects:
image viewer => right click on image => menu appears => another click on image => menu disappears and image is displayed as rotated by 180 degree
image viewer => right click on image => menu appears => edit with plugin => image is displayed as rotated by 180 degree => plugin opens => cancel plugin => image is rotated to normal again
another image got flipped horizontaly somehow.
or weird effects like this:
Something must be seriously wrong on my Mac.
(sorry for pirating this thread...)

[JAXB] Multiple imports in the root node

Hello,
I use JAXB and am doing this scenario : unmarshalling an XML document created manually, and automatically marshalling another from the generated Java code.
This is a multiple schemas / multiple imports issue.
I would like the 2 XML documents to be similar, but in the first one, I get :
<?xml version="1.0" encoding="UTF-8"?>
<aaa:first xmlns:aaa="http://aaa" xmlns:bbb="http://bbb">
</aaa>
and in the second :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<aaa:first xmlns:aaa="http://aaa" xmlns:ns1="urn:abc" ...>
<bbb:second xmlns:bbb="http://bbb">
</bbb>
</aaa>
So, how is that possible to import multiple namespaces (xmlns) in a single node please ? It seems that JAXB does the import only when needed, and won't group all the imports in the root node.
(moreover, how can I disable the "standalone" attribute in the header of the generated XML document please ?)
Thanks in advance.

Ok, I found a solution to get all namespaces placed in the root of the generated XML document : one have to implement a NamespacePrefixMapper
marshaller.setProperty("com.sun.xml.bind.namespacePrefixMapper",new NamespacePrefixMapperImpl());and redefining its ' public String[] getPreDeclaredNamespaceUris()' method.
For now, the problem is that namespaces declared there are somehow static. In fact, when unmarshalling Java objects from an XML document, it seems that this document namespaces are lost.
Do you know a way these namespaces would be kept somewhere, associated with the unmarshalled object ? I need these namespaces in the case that I would create another XML file from it in the future.
It's seems logical to keep this with the object, so did I miss something please ?

What is the importance of Only One Business Partner Allowed

Hi all,
We know that the Relation between BP and Contract account is :
1 BP : n CA.
If the above relation is true, I would like to know the importance of the configuration "Only One Business Partner Allowed" in the below path:
Financial Accounting(New) >>Contract Acounts and Recievables>>Basic Functions >>Contract Accounts >>Field Modifications>>Configure Field Attributes for Contract Account Category.
If we don't check the field for "Only One Business Partner Allowed" , Does it contradict to the 1BP : n CA relation ?
Regards,
Sai
Edited by: kantesai on Aug 10, 2011 10:35 PM

n BP : n CA relation is possible.
One BP must be account holder from all BPs of CA. Rest of BPs can be Alternate Account, Spouse etc.
Please check table FKKVKP from technical perspective, as both BP and CA are primary key. If it was 1 BP : n CA then there would have only VKONT been as primary key.
Thanks,
Murtuza

The importance of the Hyper-V setting in BIOS

Similar Messages

Maybe you are looking for