The Index Server is in Read Only Mode

Hi,
In our test environment ALL of our jobs are failing. The message in every failed Job Log is:
11/18/05 10:25:15- Starting to run operations (1 total) for job 'Search Update 2 - Run Once'. Will stop on errors. (PID=14064)11/18/05 10:25:16- *** Job Operation #1 of 1: System Agent 'Search Update Agent' [Run as owner 'Administrator']11/18/05 10:25:16- The index server is in read-only mode.11/18/05 10:25:16- The index Server is inaccessible. Search Update cannot continue and will terminate.11/18/05 10:25:16- *** Job Operation #1 failed: Call to perform operation #1 failed with error (0x80044301): (null) (0x4)11/18/05 10:25:16- Call to perform operation #1 failed with error (0x80044301): (null)
has anybody seen this before, and how can I correct it?
Thanks,Shawn

The search server goes into read only mode in response to certain error conditions.  Simply restart the service to put the search server back into R/W mode.  The server will attempt to self repair on startup.  You should review your recent search server logs to see if there are errors that may have caused the transition to read only mode.  If problems persist, contact tech support for further assistance in troubleshooting.

Similar Messages

  • The project cannot be checked out because the server is in read-only mode.

    Receiving the message "The project cannot be checked out because the server is in read-only mode." when a project manager is trying to access a project. He is a backup PM, and I'm wondering if that's why he is getting the message (since he is
    not the Owner or Status Manager of the project he is trying to access). We are using SharePoint permissions in Project Server 2013.

    Hi,
    I have a solution that might work for you, please follow steps below:
    1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
    2) While your project is being published and saved, open another window 
    Server Settings -> Manage Queue Jobs
    3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
     ( to view any error look at the last column of
    table on Manage Queue Job page)
    4) Also in your Project window see if the project is published and not saved as Draft.
    Basically this will give you a fair idea of your project being published or not.
    Regards

  • It is possible to apply redo while the standby is open in read only mode ?

    Hi,
    I am using Oracle 11g R2 (11.2.0.1.0)
    Step 1: Two node RAC is Configured.
    Step 2: One node Data Guard RAC is configured.( i,e Standby is one node RAC).
    Primary:
    SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
    OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
    READ WRITE PRIMARY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
    Standby:
    SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
    OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
    READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
    Question:
    I have not purchased active dataguard license.
    In my case In Data Guard RAC it is possible to apply redo while the database is open in read only mode?
    Thanks
    Solaiman

    876149 wrote:
    SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
    OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
    READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
    "READ ONLY WITH APPLY" in V$DATABASE.OPEN_MODE means Active Data Guard is enabled.
    Oracle code cannot check if you have the right license: it is up to you to know which license you have for your database environments.

  • Write-protect mode is currently active. The editor is now in read-only mode

    How do i get the portal out of write protect mode.   No matter what i change to do, i get the message
    Write-protect mode is currently active. The editor is now in read-only mode.
    this shows up in the log
    10/06/10 16:21:21 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.bi.tct.BI_Administration..
                         Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during
    deploy: Import aborted - write protect mode is active.

    Hi David,
    Do the following steps:
           1.       Start the Visual Administrator .
           2.       Choose Global Configuration   u2192Server  u2192Services u2192com.sap.portal.pcd.gl .
    The properties of the service are displayed:
                                a.      Pcd.Pl.WriteProtectActivated defines whether or not write-protect mode is activated. By default it is set to false .
                                b.      Pcd.Pl.WriteProtectCause  describes the reason that write-protect mode is activated. This information appears in the log files.
           3.       Deactivate write-protect mode by entering false  as the value for Pcd.Pl.WriteProtectActivated .
           4.      C lick Update and then click Save .
    A confirmation dialog box opens.
           5.       To apply the changes to all cluster elements, click Yes .
           6.       To reset the default values, click the Reset Default Global Properties icon .
    This will deactivate the write protect mode.
    Thanks and Regards,
    Syam.

  • The MDM repository is in read-only mode

    Hi Experts,
    In our environment we have a Master ans Slave repository and the synchronization is being scheduled daily.
    Now we understand from the MDIS logs of the Master repository that the repository is in Read-Only mode and none of the records can be updated / created.
    We have tried restarting the repository too.
    Please advice.
    Thanks,
    Sridhar T A

    Chander,
    We get Check/Verify Option only after repository is unarchived/created. So, this can not be applied in Maria's case....
    Maria,
    Please let us know what version of MDM you are using.. Are you sharing database for MDM with other systems too??
    Also, can you check MDM logs and provide detailed error message from logs...You can check MDM server logs either from Console or On MDM server log directory...
    This information will help..
    Please also try this after setting following entry in MDS.INI file:
    Unarchive Ignore Language Count=True
    Best Regards,
    Shiv

  • VD offline;still the Volume is accessible in read-only mode.

    Hi,
       In our lab, we have a test server setup with Windows 2012 R2(Build 9600) Standard edition installed. 
       As part of our test exercise, we need to induce the failure of a RAID 0 drive(internal storage) and carry out the volume/applications recovery. 
        We induced the drive failure by pulling out a disk drive from a RAID 0 volume. As soon as the drive was pulled out, the LSI storage controller reported the VD offline. The windows disk management did show the uninitialzed/unallocated drive
    on rescanning drives.
    But the specific volume is still accessible from Windows explorer in read only mode. The applications(sql server database) that are running on the specific volume are also running fine (they are of read-only nature). 
       We are quite surprised by this behavior. Please advise.
    Thanks and Regards,
    Jisha

    have you attempted a reboot? Pulling a drive may have different behavior than a failed drive.
    LSI is a raid controller but if you see both drives it sounds like you may be using a software raid?

  • Convert the oracle10g database into standby ( read only mode)

    One month ago, converted the oracle 10g standby database into read and write mode( database is open). I would like to convert the oracle10g database into standby
    Please provide me the steps or document
    Thanks in advance

    user8680248 wrote:
    two months ago we have convert the standyby database into standard database ( read, write)
    NoW I am plannning to convert this database into standby database
    any link or steps pleaseDid you meant you would creating(or you have) another standby database and make that standby database as primary and this as standby
    If this is not what you meant then there is no way you can make this as sandby database.
    Regards
    Anurag

  • Essbase Java API - Check if the cube is in read-only mode

    Hello,
    I use "Essbase Java Api 11.1.2.0" to manage my essbase server.
    I made a script based on sample to make a cube in read-only mode and I have an exception when the cube is already in read-only mode.
    So is-it possible to check if the cube is in read-only mode with the essbase java api ?
    Thanks
    Arnaud

    Hi,
    I have a solution that might work for you, please follow steps below:
    1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
    2) While your project is being published and saved, open another window 
    Server Settings -> Manage Queue Jobs
    3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
     ( to view any error look at the last column of
    table on Manage Queue Job page)
    4) Also in your Project window see if the project is published and not saved as Draft.
    Basically this will give you a fair idea of your project being published or not.
    Regards

  • How to display the "display values" in READ Only mode for a SHUTTLE

    Hi,
    I have a form item of type *'Shuttle'* and using the following LOV.
       select DEPTNAME d, DEPTNO r
        from  DEPTIn normal mode..it displays the department name and internally store the Deptno..
    Now I converted this item to Read Only mode using Read Only Condition Type
    the problem is as soon as it becomes read only...it displays the deptno....not the department name
                Department-   10:20:30How can I display the "display values" i.e the actual department name in read only mode..
                Department-   Department1:Department2:Department3Thanks,
    Deepak

    Hi,
    It seems feature. Shuttle is span tag when it is read only.
    Work around could be that
    you compute display as text item with LOV display value according shuttle session state and show shuttle and this item conditionally depend case
    Br, JAri

  • Which table shows the tablespace in read-only mode or read-write mode.

    HI All,
    Can someonoe help me out to find which table shows whether the a tablespace is in Read-only mode or Read-write.
    Thanks,
    naveen

    Try this:
    select tbl.table_name, tb.tablespace_name, TB.STATUS from dba_tablespaces tb, dba_tables tbl
    where TB.TABLESPACE_NAME = tbl.TABLESPACE_NAME and TB.TABLESPACE_NAME = 'YOUR_TABLESPACE_NAME' and tbl.table_name = 'TABLE_NAME'

  • Files are in READ ONLY mode

    I have a file server 2003 with shared folders. I have " FULL CONTROL" on all the folders. However, when someone else saves a document in one of the folders, it opens in READ ONLY mode on my Windows 7 machine, Office 2013. When I log into the server
    itself, I can make any changes to the file. Not from my windows 7. 
    any ideas?
    thanks

    Hi,
    This issue may occur if the following conditions is true:
    The network folder is open in Microsoft Windows Explorer and you are using Details view to display additional details (such as the author or title) for files in the folder. Windows Explorer reads the contents of the files in the folder to obtain the additional
    details. If a program tries to open a file exclusively and Windows Explorer has the network file open to extract this additional file information, a sharing violation occurs.
    You could turn off the details pane in Windows 7 to resolve the issue. Details Pane can be turned off on the open folder with the Organize dropdown:  Organize->Layout->Details Pane.
    For more detailed information, please refer to the thread below:
    Office document always opens in read-only when opening from a network folder (Windows 7 + Office 2010 with Swedish language pack)
    http://social.technet.microsoft.com/Forums/office/en-US/2800f53b-67a3-48a1-864a-8e61b1537dfb/office-document-always-opens-in-readonly-when-opening-from-a-network-folder-windows-7-office?forum=officeitproprevious
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • OBIEE11g: Set user privileges to  Open RPD in Read Only mode.

    Hi All,
    Can some one help me , how to set user privileges to open RPD in read only mode.
    1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
    2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
    How to set the security to achieve this.

    863866 wrote:
    Hi All,
    Can some one help me , how to set user privileges to open RPD in read only mode.
    1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
    2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
    How to set the security to achieve this.Hi,
    I don't think it's possible, can go with metadata dictionary option which is also help to analysis RPD.
    refer section,
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10540/utilitiesexprbldr.htm#BIEMG325
    Thanks
    Deva

  • Using edit box in Read only mode

    I am using JDeveloper 10.1.3.1.0 with OAF.
    In one page I have created one region with a few edit boxes. In this region I want to display the information using the edit boxes in a "Read Only" mode so that it matches with the same background colour.
    If the content of the edit box is small, i.e.: a few characters long, but if the content is large about 150 characters, then if I make the edit box read only, then it does not come to a new line. For this I have to make the edit box in "Disabled" mode. In "Disabled" mode only, the long message is shown in multilines. But my problem is that, when I make is "Disabled, it does not become uniform with other edit boxes with the same background colour. Can you please suggest, how can I address this problem.
    Regards

    HawkerHunter,
    I am using JDeveloper 10.1.3.1.0 with OAF.I stopped reading after that sentence. You should use the [url http://forums.oracle.com/forums/forum.jspa?forumID=210]OA Framework Forum
    John

  • Visual Admin tool in Read only mode?

    HI
    is it possible to access the Visual Admin tool in Read only mode. if Yes then How? if No then why?
    Regards
    Shridhar Gowda

    Hi,
    check with links, you may get some info, but i am not sure.
    Check some VC roles and assign those roles for perticular users for full and read only.
    1. http://help.sap.com/saphelp_nw70/helpdata/EN/7a/a0e84240857076e10000000a1550b0/content.htm
    2. https://admin.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/659c082e-0c01-0010-2e9f-ac674cfff2d2
    3. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0bf413a-66a6-2a10-8eb7-91b9e99c4a97
    Regards,
    Srini Nookala
    Edited by: Srini Nookala on Aug 26, 2008 4:02 PM

  • Form in read only mode

    Hi,
    I am a beginner in Hyperion. I created one sample form using custom dimension, but i cant able to input the values to the cell. Its in read only mode.
    Thanks,
    PC

    Do you have security on any dimensions? If so and you do not have write access to specific members this will make the form read-only.
    Make sure the intersections you are working with are level 0 data or if you are attempting to write to upper level members you will need to make the version a Top Down rather than Bottom Up.
    If the version you are using has process management enabled then you will need to start the planning cycle using Workflow/Manage Process and select the scenario/version combination -- administrators can write regardless of it being started.
    If your members are in planning however have not been sent to Essbase you will also find the form is read-only. You can do a Manage Database and Refresh to ensure your planning members exist in Essbase also.
    Good Luck,
    John

Maybe you are looking for