The indicator light doesn't work anymore

I have a older Apple TV and the indicator light doesn't work anymore. It flashes yellow when it's plugged in then nothing afterwards. It used to be green. It also doesn't want to update from iTunes anymore either

I get the same thing, but I'm concerned about mine since it doesn't sleep always when the lid is closed. It then starts to get really hot if I have it in my backpack when its closed but not sleeping.
Does anyone know what could be wrong? I'm new to Apple Laptops.

Similar Messages

  • 6 year-old battery makes horrible sounds, the charging light doesn't appear anymore

    Hello!
    My battery (and my laptop HP Pavillion zt3019ea) are 6 years old and for few weeks now my battery has made horrible sounds (like a loud mosquito) when connected to the charger. When it's not connected to the charger the sounds stop but it looks like the battery hasn't been charged at all.
    The charging light doesn't appear anymore, or very rarely.
    Is it the end??!
    Is it worth buying a new battery for a 6 year-old laptop (i already changed the hard drive few months ago)?
    Thanks a lot!!!
    Marine.
    This question was solved.
    View Solution.

    I will definately recommend buying a new battery for the unit since you still work on your notebook.
    It is bettery to buy geniune spares from HP than buying third party spares as you will have a warranty on the battery purchased.
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    I have the same issue.
    The magsafe goes orange for about 20 seconds, the battery shows 0% then it goes to a black X indicating no battery installed.
    With a new battery the same happens, although it can run on battery but does not charge.
    It runs fine on mains power, the green light is always lit.
    I have tried several things so far:
    1. Cleaned the magsafe contacts on cable and macbook
    2. Reset SMC and PRAM
    3. Installed latest battery update
    4. Tried new battery
    5. Put old battery in fridge for an hour
    I work in IT and am fairly confident taking it apart, what should I try next?
    Some people recommend a new battery connector, which doesn't seem to make sense as the battery has never been removed before.  Also some people say it will need a new logic/motherboard.
    Any experts here managed to sucessfully fix one of these?

  • After the update the home sharing doesn't work anymore

    Last night I had an update from my Apple TV. After I updated it, the home sharing doesn't work anymore on any device. Not on my iPhone, iTunes, iPad, nothing. I double checked every setting and this isn't the problem. I have the newest version of iTunes. Please help!

    Hello Roossx2,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Have a nice day,
    Mario

  • Hi, The computer in my MacBook Pro 10.6.8 isn't showing up in Skype (the indicator light doesn't show and it doesn't show in Skype preferences). Also Photo Booth doesn't recognize a camera. What can I check for please?

    Hi, The computer in my MacBook Pro 10.6.8 isn't showing up in Skype (the indicator light doesn't show and it doesn't show in Skype preferences). Also Photo Booth doesn't recognize a camera. What can I check for please?

    Hi Lee again..
    Please do not startup duplicate topics. I responded to you here >  Hi, The camera in my MacBook Pro 10.6.8...: Apple Support Communities
    Sometimes navigating the forums can be difficult.. we understand that.

  • Could someone help me and telling me how I do a copy from one song. don't tell me press the button copy - doesn't work anymore!!!

    could someone help me and telling me how I do a copy from one song. don't tell me press the button copy - doesn't work anymore!!!???

    i made a "playlist" and did some aac-version, because i need the songs for different length of time. but some of this songs i need the same way (i teaching aqua gym lessons). and earlier i could made a copy and past and it worked. but now, nothing worked! everytime something is different.
    sorry, actually i am not so good in english to explain my problems i prefere german.

  • How much will Apple charge me to fix my Ipod Touch 4g? It won't turn on because I think the battery is bad, and the home button doesn't work anymore... and it's not under any warrenty anymore

    How much will Apple charge me to have my Ipod Touch 4g fixed? It won't turn on anymore more because I think the battery is probably bad, and the home button doesn't work either... its not under any warrenty either.

    Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/

  • The back button doesn't work anymore

    I have updated my firefox and since then the back button doens't work anymore and also the browser is slowly... The earlier version of firefox was better!

    Indeed the culprit was McAfee SiteAdviser, the cure is
    for Windows 32-bit: https://sadownload.mcafee.com/products/SA/IE/upgrade/3.3.1/32/saUpgrade32.exe
    for Windows 64-bit: https://sadownload.mcafee.com/products/SA/IE/upgrade/3.3.1/64/saUpgrade64.exe

  • My iPhone 5c rear camera won't work and the led light doesn't work either

    At first just snapchat wouldn't work and then I tried my actual camera and neither camera worked. I turned it off and on again and the front facing camera works but the rear facing one doesn't. Snapchat wont use either one. Then I pulled up my settings bar thingy and the led light button is all greyed out. I rebooted my phone and it did nothing. Im not sure what to do, help please!

    Set it back to factory settings without using any backup data. If the camera does not work after that, you'll have to get the phone serviced.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    iPhone - Contact Support - Apple Support
    If the camera works after that, use the latest backup to restore your data on the phone again. If the problem comes back, your backup contained damaged data, causing this problem and you'll have to start allover again, but without the backup data.

  • With new update the script subMSO doesn't work anymore.

    I have a problem... In my folios (interactive comics) i have nested MSO..  MSO (1) with another MSO (2) in it and again in MSO (2) there is another MSO (3) and so on...
    I have made them with a script described in this page: http://forums.adobe.com/message/4595857
    All work fine with previews release on dps desktop tool and content viewer 23 24.
    But with new update the button inside Sub-MSOs doesn't work.
    Any Suggest ?
    thanks.

    We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
    Neil

  • The vibration function doesn't work anymore, why?

    My iPhone won't vibrate anymore and I can't figure out why! It just stopped vibrating one day and I can't seem to figure out what went wrong. Anyone have any ideas how I can get it to work again or is it just fried? Do I need to take it in to get serviced or do I just need to get it replaced?
    HELP PLEASE!!!

    Hey SoCalSkippy,
    So when you toggle the ringer/silent switch(shows a red dot when silent) on the left side of the iPhone it does not vibrate?
    Try resetting or restoring the iPhone.
    http://docs.info.apple.com/article.html?artnum=305743
    http://docs.info.apple.com/article.html?artnum=305744
    If it still does not vibrate after a restore it may need hardware repair. You can contact AppleCare or Make a reservation to speak with a Mac Genius.
    http://www.apple.com/retail/
    U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
    http://www.apple.com/support/contact/
    Jason

  • Satellite P10, internal keyboard: The pipe key doesn't work anymore

    Hello everybody!
    I have a Satellite P10 with WinXP(SP1) for ca. 1 year.
    Symptoms: It's about the internal keyboard. I've used the pipe key <|> indeed not everyday, but it worked. And suddenly I see that it's not doing anymore: it's "dead", whereas all other keys are working properly...
    My following steps:
    1) I've deinstalled the standard keyboard driver (101/102 keys) or Microsoft Natural Keyboard (PS/2), and it was successfully found after Windows starting up. There is no hardware conflict according to the Device Manager or System Information, the driver is running properly...
    2) The keyboard layout is German. But I've tested already the English (US) one too: the result is the same.
    Questions:
    1) Is the key physically damaged?
    2) If not, what can I do to fix the problem? Where can I get maybe a newer driver?
    Thanks in advance!
    Message was edited by: MischaG

    Hello Mischa
    If you can not use the button at all I assume that the button is defective. It is not known to me that driver update can has influence on just several buttons.
    If the unit is about 1 year old the warranty is still valid. You can contact service partner and let them exchange the keyboard.
    Bye

  • ITunes 9.0 toolbar in the Windows Taskbar doesn't work anymore

    Anyone else having this problem? The iTunes window disappears and the usual toolbar interface shows on the taskbar but the controls have no functionality. You click them and nothing happens - you can't even get the normal iTunes window back unless you have the system tray icon on. Worked before with iTunes 8 and it seems to be a problem all versions of Windows. I've tried it on XP, Vista and 7 and they all had the same problem.

    This can happen if the iTunes COM interface is not registered. To fix this, follow these steps
    1. Quit iTunes.
    2. Navigate to where iTunes.exe resides on the hard disk:
    \Program Files\iTunes
    or
    \Program Files (x86)\iTunes
    3. Right-click in the Address field at the top of the Windows Explorer window and choose Copy Address.
    4. From the Windows Start menu, type cmd in the Search field and press Enter.
    XP users will need to choose Run... from the Start menu, type cmd and press Enter
    5. Type cd followed by a space (but don't press Enter)
    6. Right-click in the window and choose Paste.
    7. Press Enter.
    8. Type this:
    iTunes.exe /regserver
    9. Press enter.
    10. Open iTunes.
    Does this fix it?

  • Just entering the site name doesn't work anymore in Safari

    Before I upgraded to Leopard I was always able to just enter something like "cnn" into the URL field and Safari and Firefox would take me to that website. Now if I do that both browsers take me to a search page, my ISPs search page. Now I'm not sure if it's something with the new OS and I can change a setting or if it has something to do with Time Capsule. I added that to my network around the same time so I can't know for sure which it is. Does anyone know what's going on?
    Thanks,
    -M

    This happens to me and it's very annoying. I don't know why, but it doesn't happen every single time. I'd say only 5% of the time I'm able to type in the site name and hit enter without an error popping up.
    This was one of the things I loved about using Mac over Windows.

  • My ethernet port on the thunderbolt display doesn't work anymore.

    I recently updated to 10.8.4 on a Mac book pro. I use it docked on a thunderbolt display.
    The ethernet cable is plugged into the display.
    Today I switch the computer on and the dot for ethernet remains orange with "etat inconnu". I tried to reboot, unplug the display nothing worked. I know the ethernet cable works fine.
    Anyone has any idea?
    Thanks,

    You could try unplugging the TB display for a few seconds and then plug back in.  If that does not work go to preferences, network and remove the ethernet display and then add the ethernet display (using the + at the bottom).  See if that works.  I had to do that on mine to fix a similar issue.

Maybe you are looking for

  • Making the mirrored disk bootable

    I have two drives that have Solaris 10 on them, mirrored. How do I boot off the 2nd drive to make sure that the mirroring works, in case the primary fails. It doesn't look like it's bootable now. I tried and it didn't work. Said "Bad PBR Sig" # eepro

  • Installilng PS on new iMac

    I'm having trouble migrating my PS from my old MacBook Pro to my new iMac. Migration Assistant did not work, and tech suggested I copy all the PS CDs to an external HD and then attach the HD to the new iMac. Then do an install to the iMac from the ex

  • Can't export MPEG-2 with alpha matte

    Can't export an .mpeg 2 with an alpha from after effects using media encoder. Is there a way to do this? The editor I am working with only accepts MPEG 2 for his lower thirds. Unfortunately I do not have a choice of formats and have to export MPEG 2

  • Secured folders

    I want to make a folder that cannot be accessed only by typing in a password. How can I do that?

  • Camera Raw file handling

    Is it possible to set Camera Raw to always open files as a smart object (as opposed to always having to hold down the option key when going from CR to PS)? It does this in CS5, but in Camera Raw CS6 preferences I did not see this.