The initial white screen doesn`t appear, but the computer starts normally.
Hi, I'm worried about something. I have a MacBookPro 15 ", and since yesterday when I turn it on, the initial white screen, with the loading bar, doesn`t appear. At first everything is black and then the computer turns on normally.` That is not normal, can anyone help me?
Yes, I normally get this white screen when I turn the machine on. Whithout seen nothing behind it. But now is not appearing anymore. I turn it on > everything goes black (should be white with the apple and the loading bar) > then the screen of the user and password to access the computer appears normally.
What can this be? I searched in the internet, and found nothing. I`m hoping to find the solution here.
Similar Messages
-
My screen doesn't work but I want to connect my phone to iTunes. It's not letting me because I have to enter the passcode. What do I do?
My screen doesn't work but I want to connect my phone to iTunes.
iPhone, iPad or iPod touch: Not responding or does not turn on
It's not letting me because I have to enter the passcode.
iOS: Forgotten passcode or device disabled after entering wrong passcode
Restore in Recovery Mode:
iClarified - iPhone - How to Put an iPhone Into Recovery Mode
If unsuccessful, try DFU mode:
iClarified - iPhone - How to Put an iPhone Into DFU Mode
After restoring, restore from back-up:
iOS: How to back up
OR
Set as new iPhone:
iOS: How to back up your data and set up as a new device
Hope all this helps. -
Not sure if I had to submit my question:
I have deleted the iCloud app from my iPad and cannot get it back. I've reset the home screen, everything else appears but not thatThere isn't an iCloud app, I'm not sure what it is that you have deleted, but it isn't iCloud.
-
The Cluster Node Selection screen doesn't appear installing RAC 9i
The Cluster Node Selection screen doesn't appear installing RAC 9i with OCFS on Windows 2003
We are using patch #2878462 OUI 2.2.0.18.0
The Oracle Cluster check was successful !more info ...
We are following the doc. id. #178882.1 "Step-By-Step Installationg of RAC with OCFS on Windows 2000" instructions. -
my ipod touch screen doesn't respond but only if tap what i want and tap it twice again. it like tap and a double tap
I think you have an Accessibility feature turned on. Triple click the Home button and then try to go to Settings>General>Accessibility and turn all Accessibility features off. To scroll you may have to use three fingers. If proem see:
iPhone: Configuring accessibility features (including VoiceOver and Zoom) -
Hello all.. I hope someone here can help. I recently downloaded some updates to my imac. Since then the computer starts but I get the home screen opening without the logon box. I can't open any programs or files and if I click on the Safari tab it disappears from the dock. I've tried rebooting with no joy.
I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
and the computer seemed fine but now the problem has reappeared. Is there a way to removed downloaded updates from the computer or revert it to an earlier state? Sorry for the long question. Hopefully one of you clever people can help. SimonClntxwhtby wrote:
Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
I have a hard drive icon on my desktop that says 10.6.2....
I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ? -
I'm trying to upload my photos to my computer. I don't have wifi so I can't use photo stream there not appearing when I sync and my phone doesn't appear in my computer and auto play doesnt come up any ideas?
windows http://support.apple.com/kb/TS1538
restart apple mobile device http://support.apple.com/kb/TS1567 -
I get a white screen when I turn on my computer
I get a white screen whenever I turn on my computer. What can I do?
Hi Dtrain10591,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Cheers,
- Judy -
Intel OS X 10.7 iMac has white screen and three-alarm sound, won't start up
Intel OS X 10.7 iMac has white screen and three-alarm sound, won't start up
The 3 beeps during start-up are telling you that the RAM is bad.
If you can access the RAM modules, you may try taking them out and putting them back in, perhaps it's only bad contacts.
If that doesn't help, you'll need new RAM module(s). -
I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went to black screen with error messages. Rebooted 5x, shot off power source, disconnected external devices... Now won't go past pinwheel... Since it does not go to black screen, I cannot convey error messages... Please advise what I could try... Thank you... I have an iMac 2009... Upgrade operating system to new system this spring... Don.
It is guitardad's again... I read past topics on this issue... As I am not overly computer savvy, I want to be careful that I don't mess things up further... Of course the extended warranty is done... There is talk about booting from the system disc... I'm not sure if this is the first thing to do or not... Can the support community, advise me on what logical steps I should take ( in order) or direct me to a website and/ or you tube video that walks one safely through the processes... Once again thank you for reading and offering your advice... I am on fixed $$$ so I'm trying to avoid calling apple, unless I have no options and/or the suggestions do not resolve the issues... Tx again Don.
-
I have a new macbook pro running lion and want to update to ios 5 on my ipod touch. My old macbook only has 10.4.11 and can't be updated to lion - and won't update my ipod touch to ios 5. But the message on my new macbook pro says I have to update on the computer I normally use for syncing or my music will be lost. Is there any solution for this?
try exporting your iTunes libary from the old computer to the new one
take a look at this from apple
http://support.apple.com/kb/HT4527
I am not sure you have home shareing with 10.4.11 but if you do it works very nicely
Mike -
Bluetooth no longer loads automatically when the computer starts
I have the Bluetooth Stack version 2.01.21.1. It was working fine. When the laptop booted up, the bluetooth mouse was automatically connected.
All of a sudden the icon no longer appears automatically in the system tray and so I have to manually connect the mouse each time
It is still listed in the startup menu on the desktop and it is still checked in startup in the msconfig.
How do I fix this?
Thanks in advanceI have just gotten off the phone with a microsoft tech who actually seems to have fixed this somewhat
He went to start/run to get to services.msc.
He chose "SSDP Discovery Services" which "enables discovery of
UPnP devices on your home network" and DISABLED it.
Go figure
The BT icon now appears in my system tray and starts up automatically when the computer starts.
I say somewhat because It still disconnects if left idle for a long period, which it did not do previously, but at least it is there when I log on.
I want to mention that I have a Dell, not a Toshiba (did not realize this forum was for Toshiba laptops rather than Toshiba software) but perhaps
you will find this information useful.
Also, at http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx you will find an autorun tool that lets you fix what is or is not
in the startup menus. It seems to work better than using msconfig which on my laptop was not making a difference as to what started up and what did not.
It is meant for IT professionals so I would not mess with it too much. However if you just check or uncheck in the startups for the BT manager you will
not do any damage. -
How do you set a default theme(in this case, the theme is HiFi) so each time the computer starts, you do not to have to constantly change it??
for some reason the function never get's called. I have this
MyComboBox.dropdown.addEventListener(ToolTipEvent.TOOL_TIP_SHOW,
myListener);
and ive tried this:
MyComboBox.addEventListener(ToolTipEvent.TOOL_TIP_SHOW,
myListener);
private function myListener (e:ToolTipEvent) : void {
trace("e: " + e.target);
trace("e: " + e.toolTip);
Any more ideas? -
my iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?
Your iPHone is designed by intention to shut off when there is a reason for the softwarer to believe that danger is immenent to the hardware. This can occurr if the software is running applications that have been corrupted due to all types of different scenarios. My best advice to you would be to restore your device back to default manufactures settings and do NOT restore the current backup of the IOS program currently running.
If this corrects the problem with your device intermittently restarting you will then know you have had applications there were corrupted on your device. Once you are convinced there are no issues with the hardware of your device you then are free to begin downloading software apps that were earlier on the device.
Good luck. -
The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not
select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)
That is the Compatibility report that I'm getting when trying to install onto parallels 10 Version 10.2.0 (28956) on my mid 2009 Macbook 13. This happens just after I click 'Install now' and accept the T&Cs.
I am selecting 'Upgrade: Install Windows and keep files, setting and applications'.
I am upgrading from the Windows Technical Preview Evaluation Copy. Build 9879.
I have updated my EFI and tried a few restarts and am booting from a CD. No luck yet.
Any help would be muchos appreciated.Hi bitofagiggle,
I am not familiar with mac machines, based on what I know, there should be more settigns that need to be configured before the installation of Windows, I suggest you contact the manufacturer for further help regarding how to make Windows to upgrade smoothly.
The below is some articles for reference:
Install
Windows 8.1 on a Mac
Your Manufacturer website:
How to install Windows using Boot Camp
Please note: Since this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
i can't ring ibooks in my App Store for my mac-what do i do, how do i download it in my mac?
-
Using previous release of OC4J in JDev 10g
We are trying to configure JDeveloper so that we can deploy our application in a standalone OC4J 9.0.4. We see in JDeveloper help, under the topic "Previous Releases of Standalone OC4J", that we should be able to configure a connection using the "Sta
-
mysql is free ware to use & free to download it help? please?
-
Set View Profiles.equipment
Hi SDN, When I addded one Sub Subscreens (No.: 110 ) in general tab, it not impact my equipment master data. why? for this should i missed some configuration? KB Edited by: Umapathy.B on Apr 19, 2008 9:15 AM
-
Exception in thread "main" java.lang.ArrayIndexIndexOutOfBoundsException: 0
I have a method that stores int array values when the method is called, here is the method code: public static void statArray() int c = 0; int dStat = 0; //Player stats int[] s1 = new int[count1]; int[] s2