The ink carriage is jammed & will not move out

The ink carriage is jammed &; will not move out when I open the lid to gain access to the carriage
Officejet 7500A

Sorry that you are having a problem with a carriage jam. 
Here is a link that may assist you with this problem. 
http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02282370&cc=us&dlc=en&lc=en&product=4083652&tmp​...
Try to move it manually. Unplug it from the back. Leave it out for 30 seconds and plug it back in. 
Does it move freely, when you try to move it on your own?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

  • My printer will not print in black ,i replaced the ink and now it will not print in black ink

    my printer will not print in black ,i replaced the ink and now it will not print in black ink

    Please read this post then provide some details.  What printer model? What operating system? Are there any error messages on the printer or computer screen?
    Is your printer still in warranty? You can check with HP's warranty tool here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HT201365 I am trying to update my iphone 4s to ios7. It is stuck on the terms & conditions page and will not move on even if I agree or disagree. Any help?

    I am trying to update my iphone 4s to ios7. It is stuck on the terms & conditions page and will not move on even if I agree or disagree. Any help?

    this did not help me.  Agree/disagree/turn off/turn on/ try again.  Nothing gets it off the initial Icloud terms and privacy policy agree/disagree page.  The phone is really of limited usefulness, being stuck on that page.

  • I drop my card in the large slot and it will not come out. help

    I drop my card in the large slot and it will not come out

    There are lots of videos on YouTube on methods people use to retrieve them. If you are strong enough to lift the computer then try shaking it on it's side, obviously make sure it's unplugged before doing so.

  • My ipad is showing the connect to itunes and will not move from there.

    After trying to update my ipad. I recieved an "unable to update" error message. Now all my ipad will do is show the connect to itunes symbols. I cannot get is to restart or restore. itunes is not recognizing the ipad.

    You will probably need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • My WiFi will not turn on. Its not a connection problem. The on and off button will not move. How do I fix it?

    How do I fix it?

    Take a look at this Apple doc -> iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If those 5 steps don't fix it, the iPhone will need service.

  • Mouse cursor is stuck top left corner of screen.  It will not move.  Tried both my Bluetooth mouse, and a USB mouse. Not moving but will click

    Tried un pairing the Bluetooth mouse and reconnecting it.  No change.  Tried both those resets people suggested to others in the forums, that didn't help either.  Borrowed my friends USB mouse for his Mac, the same thing.  Cursor will not move, but the click works.(this is what is happening for both)
    If you are kind enough to offer help, please be aware of the following: this is my first Mac.  I really know nothing about them. 

    Yes, once when I first noticed it, and each time I tried both the pram reset, and when I did the other reset (holding down p&r and the other two buttons before the grey screen, and waited for it to reboot from there).  Can't remember what that reset was called

  • Just downloaded Lion 10.7.5 and it has stopped Minecraft working correctly. Screen jumps like an earthquake and character will not move. Any ideas? Thanks, John

    Just updated OS X to latest 10.7.5 and I am using Minecraft 1.3.2.
    After loading software Minecraft screen is like being in an earthquake jittering up and down while the character will not move out of its existing square. I can use tools but not move.
    Anyone any similar experience or solution?
    Thanks

    Thanks Tom. Whilst their site did not resolve the issue you did make me think about creating a New World in Minecraft. This created fine and does not exhibit the problems. I guess the last game is just corrupt and not an OS X issue and is just a coincidence.
    Thanks
    John

  • My iPhone 4 will not come out of recovery mode.

    After attempting to update to iOS 7.1.1 (I think, may have been the next update) my phone will not come out of recovery mode when I tried to install the update. It is now stuck, and nothing I can think of will work. Tried redsnow, tried on another computer... Nothing works. Any advice?

    Hi there incendrix,
    I would recommend taking a look at the troubleshooting steps found in the article below. 
    If you can't update or restore your iPhone, iPad, or iPod touch 
    -Griff W.

  • H470 carriage will not move

    H470 printer carriage has stalled and will NOT move no matter how many times reset.   I took it to a HP authorized repair service, paid $25 for them to look at it.   They called back and said it had so many things wrong that it would take $500 in parts to repair.   I don't believe it --- it worked perfectly until this stall issue.   I see that  this stall problem is a common issue, but don't see where anyone has gotten a fix or even knows what part will fix it.    If anyone has gotten their repairs, please share info with part or repair service.   I love this printer and want it to work!

    Hi appletreasures,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that the carriage is stuck on your printer. Because of the age of the printer and the out of warranty status, I suggest that you attempt to pull that carriage over by hand. Please disconnect the power cable before you make the attempt.
    Sorry for the inconvenience .
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

    Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
    Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?

    FCPx answer: At least the answer that worked for me...
    I had the same problem, as I believe many others had.
    In my case the problem was with one of OSX Mavericks' new features: APP NAP.
    It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
    I just disabled App Napp on FCPx and now it works, again, like a charm.
    This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
    I hope this helps,
    Mariano

  • I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

    I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly.  Should I just delete the new profile and try again?

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

    My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

    Trackpad does not work properly

  • My apple mouse is not working.  The pointer will not move on the screen and it keeps turning off.

    My apple mouse is not working.  I can get it to connect but it will not move the pointer.  Left and right click is working, scrolling, just cannot move the pointer.  Also, I have replaced the batteries (numerous times) but the green power light turns off after a few minutes.  Any suggestions?

    How about clean up LED hole of mouse?

  • After updating my software my computer will not move past the apple star up screen.  What can I do to fix this?

    Help!  My Mac book pro is 1 year old.  I just updated my software yesterday now upon starting up, the computer will not move past the start up apple screen. Any suggestions?

    Thanks!  I will try in the am!  Appreciate the suggestion. 

Maybe you are looking for

  • Interactive PDF stopped working after upgrade to Safari 7.1 (i.e. all Mavericks users), Suggestions?

    We have a set of interactive PDF forms that our users access via the web.  We have to use the PDF forms online because they are configured to pre-fill basic information that is acquired from our database/information system, which our users can only a

  • Need to remove a feed

    I have had problems with a feed for almost a year. It will not update, it will not block. Meanwhile, I have another feed that is now reading the same XML file and is running perfectly. I need to destroy http://phobos.apple.com/WebObjects/MZStore.woa/

  • Wishlist for future of Aperture

    Ok, so the problems are out there now and are pretty obvious. Now assuming that much of the already discussed issues are resolved what would you all like to see in v 2? (or hopefully 1.1!) I for one would love to be able to synch my libraries from my

  • Freely Programmed Search help in Std Comp

    hi, Is it possible to add freely programmed searh help in standard SAP Component. I have dynamically assigned Freely search help to Context attribute using  set_attribute_value_help method. Now new component to be used in seach help is made in differ

  • Any BADI with IDOC(Vendor mst) control parameters????

    Hi All, I wish to know if there is any BADi called during IDOC processing(OILCRE04-Vendor Master) and has the IDOC control parameters in its methods. [b<u>]Scenario</u></b> I use IDOC OILCRE04(vendor Msster). It has a Z-segment for updating a Z-table