The install has detected that the primary IP address of the system is DHCP

While trying to install Oracle 10g R2 on RHEL 5.4, I got following error during "Checking Network Configuration requirements"
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Can any one please help me resolving it. Thanks in Advance

Nimish Garg wrote:
during the installation configure the host to be localhost; 127.0.0.1please explain how and what is the effect ??
also i wanted to know if I ignore this DHCP related warning, what will be the impact after installation on Oracle Software & DatabaseThe impact will be as in the warning that it gave you ... oracle will not function properly.
It really doesn't matter if the server is "production" or not. A server needs a fixed IP adddress. The IP address is how other computers (and in some cases, processes on the same computer) locate the server. If the addess is DHCP, then you can never know what the address is because it can change. It would be like you changing your telephone number or email address every day, and still expecting people to be able to contact you.
127.0.0.1 (aka 'localhost) is a fixed address, but it is also non-routable, which means no other machine will be able to contact this one by using that address. Every computer on the planet has that address. It means "me, myself, and I". A request to that address never leaves the machine from which the request originated.
You stated earlier that "DHCP can't be changed to Static IP", but why not? Why can't your network guys allocate you a fixed IP address?

Similar Messages

  • I am able to load some pages from a particular website while other pages from the same site give the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete."

    I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
    == URL of affected sites ==
    http://www.safelistgrande.com

    Suddenly from yesterday I am getting this error while trying to opening gmail

  • The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.

    Hi!
    I recently took over management of a Windows 2003 domain that had only one domain controller.  I was building a second DC for redundancy and discovered that the SYSVOL share on the original DC is in "JRNL_WRAP_ERROR" after the SYSVOL and NETLOGON
    share would not create on the new DC.  This error goes back as far as the log goes back so I don't know how long it has been in this state. 
    The message in the event log states to enable "Enable Journal Wrap Automatic Restore" but I found a KB article that says to use the BurFlags key instead. http://support.microsoft.com/kb/290762
    Should I run an authoritative restore since I don't have another domain controller with a good SYSVOL?
    The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
     Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
     Replica root path is   : "c:\windows\sysvol\domain"
     Replica root volume is : "\\.\C:"
     A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found.  This can occur because of one of the following reasons.
     [1] Volume "\\.\C:" has been formatted.
     [2] The NTFS USN journal on volume "\\.\C:" has been deleted.
     [3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
     [4] File Replication Service was not running on this computer for a long time.
     [5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
     Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
     [1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication
    Service.
     [2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
    WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
    To change this registry parameter, run regedit.
    Click on Start, Run and type regedit.
    Expand HKEY_LOCAL_MACHINE.
    Click down the key path:
       "System\CurrentControlSet\Services\NtFrs\Parameters"
    Double click on the value name
       "Enable Journal Wrap Automatic Restore"
    and update the value.
    If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.

    > The message in the event log states to enable "Enable Journal Wrap
    > Automatic Restore" but I found a KB article that says to use the
    > BurFlags key instead.
    http://support.microsoft.com/kb/290762
    >
    > Should I run an authoritative restore since I don't have another domain
    > controller with a good SYSVOL?
    The automatic restore process AFAIK will initiate a D2 restore. And if
    there's no other DC, sysvol might be gone.
    I really would prefer to have control - this means I would do a D4.
    Absolutely I would :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Firefox has detected that the server is redirecting the request for this address in a way that will never complete.

    keep getting this error:
    Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
    I've also tried in IE and got this page can not be displayed.
    Cleared cache, deleted cookies.
    I'm trying to access grrlzrock.com I was using it about an hour ago, and now it doesn't work. any idea?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Google calendar is getting the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." I have tried disabling cookies, clearing cookies and cache but that didn't work.

    Google calendar is getting the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." I have tried disabling cookies, clearing cookies and cache but that didn't work.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • Firefox has detected that the server is redirecting the request for this address in a way that will never complete. * This problem can sometimes be caused by disabling or refusing to accept cookies.

    Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
    * This problem can sometimes be caused by disabling or refusing to accept
    cookies.

    In my experience this is most of the times a server issue of the website provider.
    Does this error occur on all Websites or just one specific Website?
    Does this Website load in Internet Explorer (or any other Browser?)?

  • I have downloaded firefox but when I open it I get the following message 'Firefox has detected that the server is redirecting the request for this address in a way that will never complete'. What do I do?

    I have downloaded firefox but when I open it I get the following message 'Firefox has detected that the server is redirecting the request for this address in a way that will never complete'. What do I do?

    See:
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly
    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • Czn't download Calendar from cableone?? The page isn't redirecting properly Firefox has detected that the server is redirecting the request

    Cannot download Calendar from cableone.net???
    The page isn't redirecting properly
    Firefox has detected that the server is redirecting the request for this address in a way that will never complete.

    Does this happen on just one site or does it happen more often?<br>
    First I would delete the contents of the cache and delete all current cookies and try again. If clearing does not help, I would try safe mode.<br>
    Did you try to start Firefox in the Firefox Safe Mode? If it works when in safe mode, then this problem is probably caused by a broken add-on. If the safe mode does not help, that may be an indication that the server is sending some broken headers.

  • Load the document in Firefox (click gmail "Documents") error: The page isn't redirecting properly. Firefox has detected that the server is redirecting the request for this address in a way that will never complete.

    load document in Firefox (clicking gmail "Documents", error: "The page isn't redirecting properly. Firefox has detected that the server is redirecting the request for this address in a way that will never complete.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • "The page isn't redirecting properly, Firefox has detected that the server is redirecting the request for this address that will never complete" has anyone come across this staement?

    This statement pops up on some occasions when I am sending an Email, but the Emails are usually received by the recipient! who are mostly Family so I have been able to check that that have been read.

    Hi mawhitehead,
    try these
    * '''The page is not redirecting properly''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/The_page_is_not_redirecting_properly
    * '''Network.http.redirection-limit''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Network.http.redirection-limit
    * I am unable to access my gmail calender. It states that refused because of cookies being blocked.<br>https://support.mozilla.com/en-US/questions/786049
    * tried posting new thread on sourceforge shareaza forums, firefox gives problem loading page, <br>https://support.mozilla.com/en-US/questions/757368
    * Firefox has issues redirecting, cookies are all on, I think I voided my warranty. <br>https://support.mozilla.com/en-US/questions/755435
    * firefox message: &quot;The page isn't redirecting properly&quot; Firefox has detected that the server is redirecting the request for this address in a way that will never complete.<br>https://support.mozilla.com/en-US/questions/695393

  • WhenI send an email the following appears, the page isn`t redirecting properly, firefox has detected that the server is redirecting the request for this address in a way that will never complete

    firefox has detected that the server is redirecting the request for this address in a way that will never complete

    This issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • Event ID - 13568 The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.

    We had a major storm over the weekend which caused an unexpected shutdown.
    I am having an issue with one of my domain controller with Event ID 13568
    The domain controller which is running Windows Server 2012 was added successfully just a couple of days ago.
    I do not have a full backup of the server yet.
    It only has a GC role on it.
    What are the things I should look out for before I attempt to Enable Journal Wrap Automatic Restore and set it to 1?
    Would it be safer to just demote the server and start from scratch?
    Thank you all for reading!
    Mladen
    The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
     Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
     Replica root path is   : "c:\windows\sysvol\domain"
     Replica root volume is : "\\.\C:"
     A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found.  This can occur because of one of the following reasons.
     [1] Volume "\\.\C:" has been formatted.
     [2] The NTFS USN journal on volume "\\.\C:" has been deleted.
     [3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
     [4] File Replication Service was not running on this computer for a long time.
     [5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
     Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this
    error state.
     [1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs"
    followed by "net start ntfrs" to restart the File Replication Service.
     [2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
    WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from
    making the data unexpectedly unavailable if this error condition occurs again.
    To change this registry parameter, run regedit.
    Click on Start, Run and type regedit.
    Expand HKEY_LOCAL_MACHINE.
    Click down the key path:
       "System\CurrentControlSet\Services\NtFrs\Parameters"
    Double click on the value name
       "Enable Journal Wrap Automatic Restore"
    and update the value.
    If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.

    I set Enable Journal Wrap Automatic Restore to 1 and it was
    successful.
    I will monitor it to make sure it does not occur again.
    Thanks everyone on your replies
    Mladen

  • I can't access Facebook. I keep getting the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete". I have cleared cache, cookies, history, offline storage. Nothing has worked.

    can't access Facebook. I keep getting the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete". I have cleared cache, cookies, history, offline storage. Nothing has worked.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Firefox has detected that the server is redirecting the request for this address in a way that will never complete. *This problem can sometimes be caused by disabling or refusing to accept cookies. I followed the instructions for "redirection" issues.

    Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
    * This problem can sometimes be caused by disabling or refusing to accept
    cookies.

    In my experience this is most of the times a server issue of the website provider.
    Does this error occur on all Websites or just one specific Website?
    Does this Website load in Internet Explorer (or any other Browser?)?

  • INS - 40416 the installer has detected that the version of

    Hi,
    While I 'm doing upgradation from 10.2.0.5 to 11.2.0.3 on Windows 2003 getting following Error.
    INS - 40416 the installer has detected that the version of the configured instance of Grid infrastructure is not compatible for upgrade to the release of Grid.
    Is there any configuration issue?
    Thanks
    Raja..

    user12159566 wrote:
    Hi,
    While I 'm doing upgradation from 10.2.0.5 to 11.2.0.3 on Windows 2003 getting following Error.
    INS - 40416 the installer has detected that the version of the configured instance of Grid infrastructure is not compatible for upgrade to the release of Grid.
    Is there any configuration issue?
    Please detail your env !!! You need be more specific... What you are trying to do .. Upgrade database or clusterware?

Maybe you are looking for

  • How do I change my icloud account from my old email address to my new email address, the old one is no longer accessable!!

    Hi I changed my old email address over a year ago and my icloud still only recognises the old email address on my iphone 5, how do I go about changing it, if I do not have access to a password, to my new email address?  My iTunes is on my new email a

  • How to capture the logged in user in SBO

    Hi All How can i capture which user is logged in sbo in that particular instance. Is there any possibility? Tha

  • Dropped Call. No Service. Call Failed!

    Hi, I have for a number of months experienced these problems with o2 on a number of different handsets. I have been sent a new handset and new sims but it does not make a difference.  My question is what has changed? I used to get perfect call qualit

  • Need info about Airport

    Alright, I have a cable modem connected to my iMac using ethernet. I have a Linksys Broadband Router, but it doesn't work with my iMac and my internet provider (Comcast). So, I want to know if I can simply buy the Airport Extreme, install it in my co

  • Updating a database view

    Hi, can you please tell me how can i update database 'z' view. can we update as the same ways as we fill the data in database table by insert update command.. if there is any way to fill data in data base view please describe the process if any code