The installation was interrupted message after iTunes upgrade

I would appreciate help with my problem. I'd like to use iTunes but it doesn't work.
Description of the problem: I was happily using iTunes for more than a year. I received a notice that a new version was available and I upgraded. When the installation was complete I received the following message:
"The installation was interrupted before iTunes could be completely installed."
iTunes is not listed in the Programs menu and there are no files at c:\program files\itunes (itunes folder is not there).
After subsequent downloads and installs, I get the same error. When I do the iTunes standard install, QuickTime is
available and works well. I went back to the previous version, but it continued to give me the same error. I found very old versions of iTunes on the web and they too had the same problem.
During the install the iTunes icon briefly appears on my desktop and then disappears. The message box indicating that the installation was interrupted occurs right after that.
I've tried to describe the problem in quite a bit of detail below to help avoid suggested fixes that have been tried and failed.
1. I have followed the steps in the KB article. Please see the details of that work below.
http://docs.info.apple.com/article.html?artnum=93976
2. I have Administrator access. I have verified that I'm part of both the Adminstrators and SERVICE groups under Impersonate a client after authentication. This process is found in the following doc:
http://docs.info.apple.com/article.html?artnum=300361
3. Windows is fully updated through the Windows Update utility. See Windows version info below.
4. I can install any other application. I use this computer for work and I can install and uninstall any other application
I try. No other known errors or problems. I've installed other applications that use Microsoft Installer and InstallShield installers without problems.
5. I tried the Quicktime standalone install and I received the notice that "The installation was interrupted..." Quicktime is now not found on the machine and there is no Quicktime files in the Program Files. During the middle of the installation, I received the following error. Error during QuickTime Standalone (7.1.0.210) install:
Error 1905.Module c:\program files\QuickTime\qtuiPanelControl.dll failed to unregister. HRESULT -2147220472 Contact your support personnel.
When I attempt to install iTunes from the standard install, Quicktime installs properly and works. It only fails during the standalone install.
6. No strange characters in the folder. There is no itunes folder so it contains no folder. The download exe is on my desktop.
7. Temp Folder emptied and machine restarted (many times)
8. Uninstall older versions - They are not listed as installed so there is nothing to uninstall. The Windows Clean Up utility does not list them so I can't use that tool to remove them. It appears that iTunes is cleaning itself up when the installation fails so there are no files. There is no iTunes folder at c:\program files\.
9. iPodService alert is not there so I don't need to delete it.
10. Redownload software - It has been downloaded many times. Each time I'm careful to permanently delete the previous install exe so it is redownloaded.
11. AntiVirus software has been disabled. I'm using McAfee VS Enterprise 8.0.0. I have also checked the AV logs to see if it has blocked an install or other event around that time - there is nothing in the AV logs to show any blocked or prevented activity. No activity at all because the software is disabled.
12. Registry - A search of "itunes" in the Registry Editor finds a lot of references. Too many to list, but most are in keys that apply to file types.
13. I have downloaded and attempted to install the Windows Installer 3.0 package from the following URL:
http://www.microsoft.com/downloads/details.aspx?FamilyID=5FBC5470-B259-4733-A914 -A956122E08E8&displaylang=en&Hash=9PV3FS4
I'm told by a box during the install that the version I have installed is newer than the one on the website and there is no need to install it.
14. The version of iTunes that I'm trying to install right now is 6.0.4.2. I've had this problem for at least three months so I've been trying many versions before its release.
15. Other than the mentioned AV program, I don't have a third-party firewall, anti-spyware or monitoring program installed.
System:
IBM ThinkPad T42
Windows XP Pro
1 GB RAM
McAfee VirusScan Enterprise 8.0.0
Microsoft Windows XP Professional
Version: 5.1.2600
Service Pack: 2.0
Location: C:\WINDOWS
Hot Fix: KB913446
IBM T42   Windows XP Pro  

It is a miracle - After about 9 months without itunes, the new release installed on my machine today and appears to be working.
7.0.0.70 is the verion I just installed.
Another note to add to this now resolved issue. I bought an AirPort Express and I was not able to install the Admin software on the CD. I received the same error as I received with iTunes and Quicktime. This leads me to believe that this problem is in the registry or some other installer issue that is specific to Apple installations. I will have to go home and try to re-install that software. Maybe the new iTunes version cleared up the problem.

Similar Messages

  • Installation was interrupted message for a routine upgrade

    Right after "Publishing product information":
    "The iTunes for Windows installer has completed.
    The installation was interrupted before iTunes could be completely installed.
    The System has not been modified. To install this program at a later time, run the installation again.
    Click Finish to exit the wizard. "
    Describes the problem, but (1) this is a routine upgrade from the previous version (I've never had problems before), (2) I disabled all virus protection etc. (3) downloaded an other copy to make sure not corrupted
    Dell   Windows XP Pro  

    hmmmmmm.
    okay, let's try enlisting some additional technical help.
    let's try getting a installer log to someone who can interpret installer logs.
    Start menu -> Run... In the text field of the dialog that comes up, type in "cmd" and hit return.
    In the command prompt dialog that comes up, find the iTunes installer on your desktop and drag it to this window. Then on the same line type in a space and then the following:
    /Verbose"c:\log.txt" /V"ENABLE_QTLOGGING=TRUE"
    There is no space between the e in Verbose and the double quote ("). There is no space between the V"Enable...
    Hit return.
    The installer will create two log files:
    C:\log.txt and C:\qt.log
    Find those files and send them to this email address Put the URL to this discussion thread into the email, so that the person who gets it has some context. Let them know the version of itunes you’re trying to install, too … in general, give as much info as you can.

  • "The installation was interrupted before iTunes could be installed"

    For several months now I have tried unsuccessfully to install iTunes on my laptop computer. The older versions worked, with several bugs, but they worked nonetheless. After installing EITHER iTunes or QuickTime, I get the messages:
    "The installation was interrupted before iTunes could be installed" or "The installation was interrupted before QuickTime could be installed". The result is that NOTHING has been installed on my harddrive. I have read over many previous tech support posts on this forum and have tried many of the proposed solutions to other peoples' problems.
    This isn't necessarily an error message because it doesn't 'popup' after installation, but rather is on the iTunes+QuickTime screen that begins by saying "the iTunes for Windows installer has completed". Immediately underneath is where I get "The installation was interrupted before iTunes could be installed". Followed by "the system has not been modified. To install this program at a later time, run the installation again." (no ****?). My only option at this point is to click "Finish", which takes me back to the desktop with no sign of iTunes or anything.

    Just noticed the post below mine solved this problem. Now additional problems have arisen...

  • HT1222 I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed.  Your systems has not been modified."  I NEED HELP, PLEASE!

    I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed.  Your systems has not been modified."  I NEED HELP, PLEASE!

    I got it figured out myself... yaaaaay for me!

  • Firefox will not install on my laptop using windows 7. I keep getting a message saying that the installation was interrupted

    Every time I try to install firefox on my laptop i get a message saying that the installation was interrupted. I am using windows 7.

    Oh my god, thank you so much! Ive been working on this for hours and with your help it was done in five minutes. Thanks again!

  • The installation was interrupted before itunes could be completely installe

    "The installation was interrupted before itunes could be completely installed." I am getting this error when I try to install itunes or ipod updater form either the downloaded copies or the CD. I absolutely can't get either installation to finish. I have tried all the suggestions on the Apple website. Have installed all current Windows updates and the Installshield updates form their website. This ***** I can't use my $350.00 Ipod, now a very expensive paperweight. Thanks, anyone who can help. Win XP home on a stock a Dell 4550.
      Windows XP  

    Oh, one more thing. If this proves to work, you must configure your Firewall to not block iTunes from launching. What will happen is, you will download iTunes and Qucktime and when you go to launch it, it won't open. That would be because that firewall is blocking it. Post back and let me know if you have Norton, I can post the instructions on how to configure it to allow iTunes and Quicktime.

  • Trying to access https site with a cert, got "The connection was interrupted" error after 30 seconds of waiting time before clicking on OK. But I can get in by clicking on Try Again button.

    I have a web site running on https. Every users need certificates to get in.
    I found out that if I didn't submit my cert within 30 seconds, Firefox displayed "The connection was interrupted". This problem is repeatable. But if I click on "Try Again" button on the error page, I can get in all the time.
    This problem doesn't happen on IE.
    Can you provide any tips to avoid seeing the error page?

    It is a miracle - After about 9 months without itunes, the new release installed on my machine today and appears to be working.
    7.0.0.70 is the verion I just installed.
    Another note to add to this now resolved issue. I bought an AirPort Express and I was not able to install the Admin software on the CD. I received the same error as I received with iTunes and Quicktime. This leads me to believe that this problem is in the registry or some other installer issue that is specific to Apple installations. I will have to go home and try to re-install that software. Maybe the new iTunes version cleared up the problem.

  • I use firefox to get my gmail but now i keep getting "the connection was interrupted" message which i never got before

    i have been using firefox to access my gmail. however, only since today i get the following message:
    The connection was interrupted
    The connection to mail.google.com was interrupted while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    however, i am able to connect on my ipad for gmail.
    helppppppp!!!!

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Also make sure to allow Firefox in your security software (firewall).
    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
    *http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

  • Error message after iTunes upgrade

    The error message reads:
    "The attempt to burn the disc failed. The device failed to calibrate the laser power level for this media."
    What does this mean?
    I am using the same discs as I always have. I just installed the latest upgrade. version 6.0.5
    imac   Mac OS X (10.4.4)  

    Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.

  • Cannot install Itunes update getting error installation  was interrupted

    today i tried to upgrade to itunes6.04 during the installation i got the following error message. The itunes wizard has completed. The installation was interrupted before I tunes could be completly insatlled. he system has not been modified. to install the program at a later time,run the installation again. Click finish to exit wizard.
    I have tried add remove programs, itunes is gone so is quick time.
    I hae emptied all my temp files, along with doing a system restore to a prior date.
    I have also tried to install my initial software cd and ge the same error message.
    Also I am using norton system works which was turned off all during this time.
    what can i do to get up and running again so i can use my ipod.
    BEFORE I TRIED TO UPDATE ITUNES EVERYTHING WAS RUNNING FINE WITH MY IPOD/ITUNES
    dell 9100   Windows XP   3.02 gig, 512 ramm

    today i tried to upgrade to itunes6.04 during the
    installation i got the following error message. The
    itunes wizard has completed. The installation was
    interrupted before I tunes could be completly
    insatlled. he system has not been modified. to
    install the program at a later time,run the
    installation again. Click finish to exit wizard.
    I have tried add remove programs, itunes is gone so
    is quick time.
    I hae emptied all my temp files, along with doing a
    system restore to a prior date.
    I have also tried to install my initial software cd
    and ge the same error message.
    Also I am using norton system works which was turned
    off all during this time.
    what can i do to get up and running again so i can
    use my ipod.
    BEFORE I TRIED TO UPDATE ITUNES EVERYTHING WAS
    RUNNING FINE WITH MY IPOD/ITUNES
    dell 9100   Windows XP  
    3.02 gig, 512 ramm
    I have the same problem there seems to be no solution on the discussion board. So what next?

  • I have upgrade to Ios5 but after the installation was complete I found that the App Store and Itune are displayed in French version

    I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.

    But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939.  Then how its become 3G.

  • How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad?

    How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?

    Thank you!
    Disabling firewall and AV did the trick!
    Kudos.
    Alex

  • HT5037 I still get the message to download the app, but I did, and the installation was allegedly successful.  This even happens after a reboot

    I still get the message to download the app, but I did, and the installation was allegedly successful.  This even happens after a reboot

    I guess that was a bit cryptic.  I'm trying to update iPhoto from system 10.5.6, a PowerPC system, to 10.8.  The app I downloaded is iPhotoLibraryUpgrader.dmg. I open that and I see Iphoto Library Upgrader.pkg.  Igo through the install, which says it completes successfully.  However, when I double-click on the iPhoto icon on the dock, I get the oroginal message that the upgrade must be installed.  I hope this gives enough information to diagnose the problem.  I apologize for the first message's laack of detail.

  • While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation a

    While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again." How to resolve it.
    How do I modify the system.

    Hi Rgardezi,
    The only reason why Acrobat installation fails and throw this error message is when there are some services running in the background causing the installer not to complete the installation. My take is try the following steps and suggest if you were able to install the products or not :
    1) Navigate to control panel and confirm that there is no line Item that talks about Acrobat. If you see Acrobat XI listed there, please remove them.
    2) Perform a selective Start up using the steps mentioned in this link.
    Please suggest if the above mentioned steps were able to resolve the query for you or not.
    Cheers,
    Kartikay Sharma

  • HT1926 My iTunes installer was interrupted & now it's telling me "Your system has not been modified.  To complete these operations at a later time, please run the installer again". The only problem is, I've tried to run it about six or seven times.  Can s

    My iTunes installer was interrupted &amp; now it's telling me "Your system has not been modified.  To complete these operations at a later time, please run the installer again". The only problem is, I've tried to run it about six or seven times.

    I'm not sure anyone here knows more about the Java plugin than you do...
    Were you starting the control panel from disk as administrator because it didn't work starting it through the Start menu (if you have Control Panel set to View by Category, the Java control panel is under "Programs").

Maybe you are looking for

  • When syncing to iphone, new playlists are not being added to phone. How do I get the new playlist onto phone?

    I need help with this problem. Any help welcome.

  • CMYK Sliders

    How do you get the CMYK and RGB sliders in the colour pane working to add some colour to a black and white logo, am using CS6 and the both colour sliders are grayed out so you cant use them, only seem to be able to add shades of gray.

  • Decode and Case

    Hi, What is the difference between decode and case? What are the cases in which we can use Decode and case Thanx

  • My iphone 5 hangs after calls duration 1:20

    Ingles my iphone 5 hangs after calls duration 1:20 iphone hangs one of my calls and other calls do not get an operator in particuar. please help Español mi iphone 5 cuelga las llamadas despues de 1:20 de duración uno de mis iphone cuelga las llamadas

  • Once again ora 12514

    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jan 22 22:28:13 2013 Copyright (c) 1982, 2005, Oracle.  All rights reserved. Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mi