The installer could not be found

Hi all im using macbook pro retina and boot camp assistnt 5.0.1
theres a problem after choosing the partition size..
what i get is the message 'The installer could not be found. Insert your windows installer disc and wait a few seconds for the disc to be recognized.'
can somebody help me?D:

You have to insert the USB drive or DVD with Windows 7 on your Mac before partitioning, so you will be able to install Windows

Similar Messages

  • New Installation Failing w/Error: The update could not be found.

    On a new 2008 R2 server (Standard), using the Add Roles Wizard, I tried adding WSUS but it fails with "The update cound not be found. There may be a network connection issue. Click here for more information."
    Clicking there takes me to the "Resolving WSUS issues" pages with refereces to Microsoft. The first is the most relevent:
    "If you receive the message “The update could not be found. There may be a network connection issue.” when you try to install WSUS, refer to the information in the Network and Sharing Center Troubleshooting Guide."
    Clicking on the link to the "Network and Sharing Center Troubleshooting Guide http://go.microsoft.com/fwlink/?LinkId=140135" takes me there (so there are no connectivity issues) but nothing seems to apply to my issue. I can browse the internet just fine and have even went in and manually installed various required components like IIS, .NET Framework 3.5.1, and Windows Internal Database but still no luck. I even downloaded the file "WSUS30-KB972455-x64" and tried running that without success. What am I missing?
    Thanks in advance.

    On a new 2008 R2 server (Standard), using the Add Roles Wizard, I tried adding WSUS but it fails with "The update cound not be found. There may be a network connection issue. Click here for more information."
    To install WSUS as a role, the candidate server must either have an active Internet connection to obtain the WSUS installation package from Microsoft Update, or be configured to update from an existing WSUS server with the WSUS3SP2 Dynamic Installer package already approved. If the R2 server is configured to use WSUS and the WSUS3SP2 Dynamic Installer package is not approved for installation for the group(s) in which the R2 server is a member, then you may also encounter this situation.
    and have even went in and manually installed various required components like IIS, .NET Framework 3.5.1, and Windows Internal Database but still no luck. I even downloaded the file "WSUS30-KB972455-x64" and tried running that without success. What am I missing?
    That's hard to say. Running the installer should not have presented any issues, but then you've not shared the exact details of that particular failure, which almost certainly would have been different from the previous failures encountered using Server Manager. Of course, successfully running the installer presumes that the server has been properly prepared and prerequisites have been properly installed and configured. I would be concerned that you don't seem to have referenced and followed the explicit instructions documented in either the Step By Step Guide or the Deployment Guide, so this is a high probability source of the cause. (Note: .NET Framework 3.5.1 is NOT a required component, the Windows Internal Database does not require manual installation for WSUS, and if IIS7 is not properly configured with the exact requirements for WSUS, the installation will fail.)Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
    Principal/CTO, Onsite Technology Solutions, Houston, Texas
    Microsoft MVP - Software Distribution (2005-2010)
    My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
    My Blog: http://onsitechsolutions.spaces.live.com

  • Error - A valid installer could not be found, using AAMEE and CS6

    I receive the error - A valid installer could not be found, when using AAMEE 3.0 to create a CS6 Trial Package in Windows 7.  I'm following the procedure documented here - http://blogs.adobe.com/oobe/tag/cs6 Imaging CS6-Attack of the Clones.  I've tried both pointing at the DVD and pointing to a local folder, after copying the DVD to a local folder and copying the \payloads folder from the second DVD.  I know the DVD is valid because I did a manual installation.  I'm pointing at the folder that contains the Set-up.exe file, plus I've tried pointing at every other folder as well, with no success.  I have a 40 user license for CS6 Master Collection for a classroom on our campus.  I need to create a image for this classroom, and was thrilled that a solution was being provided to accomodate this, but AAMEE does not work!  I'm working in a Windows 7 environment.
    On top of this frustration, my Adobe ID is not working, I've used "chat" support and phone support and I can still not log in.  They claim it has been escalated.  When I explained the AAMEE error to the phone support rep, he informed me that there was no technical support and my only option was to post the question on the forum...but you have to log in with your Adobe ID to post a question!  Round and round it goes.  So I had to create another ID under a different email, just to post my question.  I'm getting the mystery "an error has occurred, please try again", when I try to log in with my work Adobe ID.
    Help! Anyone?

    RESOLVED - Thanks in part to the ALBERT-in-Vancouver and Tushar Bammi thread concerning a similar problem.  I dissected the PDApp.log.  I had copied the installation DVDs to a local folder per the Deployment Guide, when installing from the DVD initially failed.  But, PDApp.log stated - EnterpriseNativeApplet Individual media disks on fixed volumes are not supported, please use CD/DVD or mounted ISO/DMG media.  That clued me in to trying to create the MSI using the DVDs again.  My fault - that the original attempts to create the MSI from the DVDs did not work, I didn't realize I needed to run AAMEE with elevated privileges.  Note - the earlier attempts when I was running AAMEE with elevated privileges and pointing to the locally copied installation files, failed.  Interesting.  I'm confused as to why the Deployment Guide directed my to create a product-install folder...
    I haven't tested the MSI file yet, but if I have additional problems I will start a new thread.
    Thanks.

  • Photoshop Elements 6:   Could not use type tool because the file could not be found

    Using Adobe Photoshop Elements 6.0 well for a while.
    Tried to use the Type Tool to overlay text and obtained this error:
    Could not use the type tool because the file could not be found
    After research, I reset all tools, tried to repair (failed: insert disc one), and then removed/re-installed.  Still have the same problem.
    Are the system fonts corrupt or is an Adobe .ini file suspect?
    Other reports have suggested using a 3rd-party font manager to inspect/disable fonts.
    First wanted to post this error here for feedback/recommendations
    Any suggestion on how to recover the Type Tool functionality?
    Eric Edberg
    Adobe Photoshop Elements Repair Workaround
    When trying to repair the well-known:  insert disc one, error occurred.  Was able to successfully repair the installation by dragging the entire Adobe Photoshop Elements directory from the original CD-ROM onto a hard drive and executing locally.  Seems it does not like repairing over the CD-ROM but it works correctly if the install source is on disc...

    John,
    Yesterday, I decided to completely remove all Adobe products:  PSE 6, Premiere 4, Reader, ActiveX plugins & legacy/old uninstalled product directories that Adobe has left turd-lets around including old Acrobat 3/6 directories.  Used A/D Software to remove all adobe products and then followed your instructions AND the instructions on Adobe's support web site to manually remove these products.
    It boiled down to manually removing the entire Adobe directory in Progam Files, "saving" the entire Adobe directory structure in each users (3) Document and Settings in the Application Data and Local Settings (as instructed by you and Adobe) and rebooting.
    I also saved the local All Users "configuration" database/cache that contained the Tag and other information to make sure the system was clean
    This included following the manual Regit instructions to remove legacy Adobe registry hives.  I deleted all keys for all Adobe product trees that I could locate (following instructions from Adobe).
    Reboot
    Scheduled a CHCKDSK on all drives and rebooted
    Dragged my complete image library to an archive location and deleted them on the C: drive
    Did a complete system Defrag
    Re-installed Adobe and alas still have the same problem with the Type Tool....
    The only thing I did not do was selectively remove the "fonts" because various instructions seemed to indicate many are "required" by the windows or other applications and I was not really sure how to identify which ones were safe to remove w/o affecting the core system..  I'll have to re-read these instructions next.
    Microsoft has a "Font Validator" tool, but that only checks 1 font at a time and you have to read the "results".  May look for other tools.
    Will be able to check the font structure this weekend since it will take some research before I'm comfortable just removing fonts in trial/error mode.  I'll need to make a backup image of my computer before I start this (just in case).
    Thanks for follow-ups too!
    Eric Edberg

  • Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.

    We have an SharePoint services 3.0 installation that uses custom web parts on 100s of subsites.  The custom web parts on any website is presenting this error
    Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.
    This past weekend we decided to create a new database server and migrate the databases to the new server in an effort to retire an old box. 
    INitially we attempted to go through the configuration wizard which didnt do anything but add a new database server to our farm.  What we have done is remove the new database server from the farm and use an alias on the SP server to continue to use
    the same name but actually get its data from the new database server.
    Everything works with the site except these custom webparts. 
    Any thoughts on where to go to first, should i redeploy what i think are the webparts from VS 2005 (solutions are VS 2005 slns.)? 
    Tony Spaulding

    You need to make Safe Control enteries in your web.config for the particular web application.
    Open web.config
    Locate the SafeControls Tag
    Make a safe control entry
    <SafeControl Assembly="Assembly name, Version=1.0.0.0, Culture=neutral, PublicKeyToken=d8eb6481d8b4beec" Namespace="your webpart namespace" TypeName="*" Safe="True" />
    In order to find the assembly details, Open the GAC. Right click on your dll and then click properties.

  • The software could not be found on any servers at this time

    Hello,
    Within the last few days OSD from within the OS has started to fail. The error it provides is
    The software could not be found on any servers at this time. I find this error misleading since I can PXE, connecting to the same server, and the OS installs without issue.
    For giggles I did try and install some updates and other software from the server and they installed using Software Center. With that my boundaries are setup and the client is communicating with the DP.
    Distribution Point='http://<server.domain>/SMS_DP_SMSPKG$/Content_f90faa01-0846-4704-9d86-d788273ab397.1', Locality='LOCAL' ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_50cea2c8-29cb-48c4-830b-571f72e14c04.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_d5a14c61-8ab2-4ec9-808a-ab6f89ab56f8.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_0ea10922-95d6-4751-a3da-3dab19e70fa4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_310e7d49-0dd2-479b-886d-9c822ff214c4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_cc2d6253-a90d-489b-b294-7eb3ed645029.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_a41d3047-5a90-400b-bc76-7808ff0c8503.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_fed1abf3-ab3b-45ef-9c20-8a419c2a13b6.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_879fade3-5b18-4959-bb2b-bc8a9bed1f71.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_16bba65e-16a6-49bd-b757-536e65ff94f1.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_4a8abdc6-2c2e-4f4c-b2ab-38306ba90425.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_0b1e115f-d8cf-4b2a-944e-bdd888c1775e.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_384b9d17-1502-467a-99ca-2669f0d1b5c7.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_68117c8a-50c3-4b95-9e3e-965238fe749a.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_a38b2000-a2d6-4974-8409-827a76ad1b17.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    The number of discovered DPs(including Branch DP and Multicast) is 0 ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    I have a feeling the final line is the indicator to my problem, but I dont understand why. Unfortunately this seems to be happening at other sites as well.
    Edit
    I checked the boundary groups and made sure that they had at least 1 site server assigned. I also checked the permissions of Production (not-working) to Test (working) and they line up. When I choose 1 application/update to install the line
    The number of discovered DPs (including Branch DP and Multicast) is 0
    changes to 1. I also do not have the servers DP set to pre-deploy, if I recall that is the wording on the first tab of the DP settings. Also browsing the HTTP address provides results.

    Hi,
    The task sequence for unknown and known is the same.
    That is what I want to confirm. I did more research, and some indicate boundary issue:
    https://social.technet.microsoft.com/forums/systemcenter/en-US/75b22009-48ea-43b6-8992-b1f3d3bbe51c/the-software-could-not-be-found-on-any-servers-at-this-time
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • A valid installer could not be found - Presenter 10

    I am trying to create a package through AAMEE for Adobe Presenter 10.  I extracted the 7z package using the Presenter_10_LS21.exe and directed the extracted files to a temp folder (C:\temp\..).  When I enter the location of the product-installation folder on the Media & Package Identification screen, I get the error: ' A valid installer could not be found'.  When I look in the directory, I see the setup.exe and configuration.xml file.  So what am I missing?

    in trying to debug the above error, I found this in the PDApp.log:
    [FATAL] EnterpriseNative - Error in mdbGetProductIDList 12
    Anyone have any ideas?

  • 10.5.2 The Installer could not install some files in "/"

    I have tried to upgrade my Inter Mac Mini Core Duo 1.66 to 10.5.2.
    I ran the install through software update and proceeded through the 2 restarts. Once my mini restarted I checked "about my mac" to find that it still said the system was 10.5.1
    I ran software update again to find that on trying to install i now get the message
    Install Failed - The installer could not install some files in "/" please contact the software manufacturer for assistance.
    I then tried the same with the combo updater and got the same message
    I have tried to verfiy my disk or repaire permissions using disk utility for it to completely hang with the spinning beach ball and causes finder to crash.
    I have also booted up with the leopard disk in and tried disk utility which says there are no problem with the disk but disk utility in leopard still hangs
    Can anyone help??
    Is anyone getting the same problem?
    Thanks

    I'm having the same problem installing the Leopard Graphics Update on my Dual 2.5 G5. Installing 10.5.2 went fine, but afterwards the graphics update would fail to install, with the same error message you got. I tried both Software Update and downloading the standalone installer.
    But wait, there's more! I also can no longer repair permissions using Disk Utility. I get the following message: "Error: The underlying task reported failure on exit." Booting from my Leopard install CD does allow me to fix permissions.
    Lastly, my second internal hard drive is now also behaving oddly, Any time I try to drag a file to the Trash, I get a dialog box telling me: "The item "(file name)" will be deleted immediately. Are you sure you want to continue?"
    I've run DiskWarrior from the CD and tried fsck in Single User mode (no errors found). Nothing seems to help
    I had no problem updating to 10.5.2 on my MacBook, but the update to my desktop has been a real booger. Anyone who can offer any input, I'd sure appreciate it.

  • I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice:  Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is apprciated

    I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice:  Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...

    Yes.   I've found that works best.  Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth.   Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full.   So unfortunately there is a lot of empty space that is needed for smooth operation.

  • 10.5.4 Update: The Installer could not install some files in "/"

    I am unable to install 10.5.4 on my Intel iMac. I have rebooted multiple times, disconnected all external drives including my printer and tried the installer with no success. I have not found anything pointing to why on the forums. Any assistance would be helpful.
    Model Name: iMac
    Model Identifier: iMac4,1
    Processor Name: Intel Core Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 2 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: IM41.0055.B08
    SMC Version: 1.1f5
    Thanks,

    I am having the same issue, and a permissions repair did nothing for me.
    I have attempted an install from software update, downloaded both the 10.5.3/4 combo update, and the 10.5.4 update and manually tried to install, each time with the same error: The Installer could not install some files in "/"

  • When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

  • Crystal report error (The table '' could not be found)

    Dear Expert,
    As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
    Using the 'Crystal reports for SAP B1', they already view the report.
    But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
    I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
    Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
    Thanks in advance for any help.

    Hi ,
    We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
    Best regards,
    Jadie

  • A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe.

    Hi,
    After moving my files from SP 2010 to SP 2013 , for all my web parts i am getting A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe. error. I checked web.config files
    and they are there as safe control and trust level is also full. 
    These webparts work in 2010.
    Do i need to tweak something in code or distributed cache to make this thing work? The errors i see are
    Error importing WebPart. Assembly  c , Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29, TypeName. C. A Web Part or Web Form Control on this Page cannot be displayed or imported. The type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
    could not be found or it is not registered as safe.
    Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type C Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
    could not be found or it is not registered as safe.    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)    
     at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()    
     at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
    An error occurred while attempting to add the gallery item [Custom] c to the page. The error was: Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The
    type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29 could not be found or it is not registered as safe.    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)    
     at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()    
     at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)    
    Adit

    Hi Adit,
    According to your description, my understanding is that the error occurred when you deployed the .wsp files to SharePoint 2013.
    I recommend to check if all the assemblies are put into the BIN and GAC.
    If above cannot work, you can check the troubleshooting steps in the link below:
    http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=189
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Error message on boot up: The file could not start C:\Windows\SysWOW64\vidperf.dll. The path could not be found?

    C:\Windows\SysWOW64\vidperf.dll  The path could not be found? What does this mean? How do I re-install this packet and eliminate this error message?
    Dell Laptop inspiron 1525 with Windows 7 Premium with open rights.

    P
    Just to eliminate the possibility please run Malwarebytes
    Please download the free version of Malwarebytes.
    Update it immediately.
    Do a full system scan
    Let us know the results at the end.
    http://www.malwarebytes.org/products
    Wanikiya and Dyami--Team Zigzag

  • I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??

    I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
    I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???

    How did you do this move?  Unless you know what you are doing you have to move the whole, complete iTunes folder.
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

Maybe you are looking for