"The installer could not copy the necessary support files." Error message on 0S X 10.6.3 Install

I have just wiped my iMac 21.5' Core i3 3.2GHz as I am going to sell it. This process went as expected but when I try to reinstall the OS from the disk that originally came with the system (10.6.3) it gets around 30% into the install and then produces the error message "The installer could not copy the necessary support files." No matter what I try the outcome is the same and the installation fails.
I did have the hard drive replaced on this iMac a couple of years ago as it was of a batch that apple said could go pop one day. Do the hard drive and the OS X disk that comes with the system have to match, or is it just a case of a faulty disc? Any help would be greatly appreciated.

Hi sonicdeathmonkey1882,
If you are having issues reinstalling the OS on your iMac, you may find the following articles helpful:
Apple Support: Troubleshooting Mac OS X installation from CD or DVD
http://support.apple.com/kb/HT2956
Apple Support: Troubleshooting Mac OS X installation and software updates (Mac OS X v10.6 and earlier)
http://support.apple.com/kb/ts1394
Regards,
- Brenden

Similar Messages

  • I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice:  Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is apprciated

    I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice:  Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...

    Yes.   I've found that works best.  Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth.   Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full.   So unfortunately there is a lot of empty space that is needed for smooth operation.

  • The installer could not copy the necessary support files (fresh mac OSX install

    so i had to change the hard drive...
    installing OSx leopard from my origanal grey disk i recived with my MBP 13..
    it dont get far before it comes up with that.. ive tried useing a external CD drive thinking it may be the drive.. also tried a external hard drive thinking it was the HDD i was useing.
    however, all efforts to reinstall have failed..
    any help would be great
    thanks

    System discs are not found in Apple stores = Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
    Your disc drive may need cleaning.  Try that.

  • Install Failed. Installer could not copy the necessary support files

    I replaced the hard drive in my MacBook 13ac OS X" late 2009. I am trying to reinstall th OS and applications from th CDs that came with the computer. When I start the computer and try to install the OS, it starts to install, after about 2-3 minutes I get the following message. Install Failed. Mac OS X could not be installed on your computer. The Installer could not copy the necessary support files. Click restart to restart your computer and try installing again. I have done this several times with no luck. Is the CD missing something? Is there another way to do this?

    Disconnect any attached hard drives.
    Boot off the disk and try running Disk Utility Repair Disk and Repair Permissions. If that is successful, try to re-install. If that doesn't work boot off the disk and use Disk Utility to erase and reformat the drive as Mac OS Extended (Journaled).

  • The installer could not validate the contents of the 'BaseSystem' package

    Hello all,
    Sorry for my first post being a problem, but I am not the worlds greatest Mac person and I have been asked to support our Macs here at work.
    I have had a hard drive go in a MacBook, and I have fitted a new 160Gb hard drive (upgrading from the original 80Gb one) and I am getting the above error.
    I tried installing Leopard 10.5.4 from its original CD (we bought a full version when we upgraded this Macbook previously) and got the above error.
    SO I thought I would have to install the original version of Tiger and upgrade from there, in the same way that I did before. I reinstalled Tiger no problems from the disks which came with the MacBook, and then tried to do the upgrade, but got the same error.
    Am I doing something wrong or is there a problem do you think ?
    The MacBook has been upgraded form this particular disk once before, and no changes to the MacBook have been made apart from replacing the defunct hard drive.
    Thanks in advance, and I apologise if I have missed out any important needed information because as I say I am fairly new to Macs.

    I have your solution! I just experienced the same problem after installing a new hard drive to replace a crashed drive in an iMac (Ambient Light Sensor) model.
    I initially thought it was the optical drive and/or the Leopard DVD. I tried two Leopard DVD's and both the internal slot-load and an external FireWire drive. All resulted in the same error at the calculation stage of the install...could not verify basesystem. All hard drive tests passed.
    I used the Apple Hardware Test (your original OS DVD) and what did I discover? A failed memory DIMM! Even though the Mac would boot from an external, I thought everything was OK. The failed memory DIMM is the culprit!
    Here is why: The Mac OS X installer copies data to memory, then copies to the hard drive. When the copied data encountered the failed memory DIMM, the Installer kicks back the failure that it could not validate the basesystem. The data in the memory becomes corrupt because the DIMM is corrupt.
    I replaced both DIMMS in my iMac (an upgrade from 1 GB to 2 GB) and sure enough, the installer is running smoothly without any problems.
    So replace your memory and your problem is solved. Or figure out which DIMM went bad and replace it.

  • The document could not be saved. A file error has occurred.

    I opened an Adobe Reader PDF form that I can save data on from a folder in my computer and now it won't let me save any of the changes I made to it. I know I have been able to save my changes in the past, but now it continues to give me this error message. Please help!

    Hey jdorimoto,
    Could be please confirm if you are using Adobe Reader or Acrobat (what version) to open a PDF form.
    What version of OS are you using?
    Try saving the form to any other location with administrative privileges and then check.
    Hope to get your response.
    Regards,
    Anubha

  • Installer could not locate the data it needed... Entourage 2008

    Hi, I'm a bit of newbie to Mac's... I am trying to work out why a copy of Entourage 2008 I have wont install... I have posted on the Mactopia forums but with no success, so I thought I would try here, as I am not sure if it is an Entourage/Microsoft issue or a Mac OS issue. Every time I try to install my downloaded e2008.iso (came with my Exchange server rental) I get the following error: "Install Failed. The installer could not locate the data it needed to install the software. Check your install media or internet connection and try again or contact the software manufacturer for assistance". I am assured that the download I have is complete and 'verified'. When I double click the .iso file, it mounts and then opens - i then click through 'Office Installer_mpkg / contents / distribution.dist to begin the install. If anyone has any advice on what I might be doing wrong I would appreciate it! Thanks.

    Thanks - it is reputable (should be...) as it is from the company i get my exchange server rental through, part of the 'package' is a download of entourage or outlook. Unfortunately they do not offer very good mac support... Have gone back to them to make it their problem! thanks all the same.

  • Could not copy the file "C:\Microsoft.WITDataStore.dll" because it was not found.

    Hi All,
    I need to use "Microsoft.TeamFoundation.WorkItemTracking.Common, Version=11.0.0.0" dll in my code.
    But when I try to build my application I get the below error.
    "Could not copy the file "C:\Microsoft.WITDataStore.dll" because it was not found."
    And when I try to include version 12 of the same dll , code gets build successfully. And when I try to consume the code(which uses the dll) I get
    'Could not load file or assembly 'Microsoft.TeamFoundation.WorkItemTracking.Client.DataStoreLoader,
    Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
    The system cannot find the file specified."
    how do I go ahead with this..??
    Thanks
    Uma.K

    Hi Uma,
    You might check whether the version 11 of the assembly is referenced or added into soruce control. When use the referenced files, please use the relative path for building. If the version 11 of the assembly is not added, please add it to source control and
    make sure it's referenced correctly.
    It would be better to let us know the TFS version that you're using. And you can also use version 12 if the assembly works fine. If you have any other concerns, elaborate your scenario with more details.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Microsoft.WebApplication.targets 182 5 error MSB3030 Could not copy the file because it was not found

    We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
    getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
    We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
    We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
    update.
    <package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
    <package id="angularjs" version="1.2.23" targetFramework="net451" />
    <package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
    <package id="angularjs" version="1.3.8" targetFramework="net451" />
    After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
    Task "Copy" (TaskId:395)
    16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
    Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
    Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
    16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
    Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
    Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
    Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
    I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
    in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS. 
    Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
    The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
    <Content Include="Scripts\angular-animate.js" />
    <Content Include="Scripts\angular-animate.min.js" />
    <Content Include="Scripts\angular-aria.js" />
    <Content Include="Scripts\angular-aria.min.js" />
    <Content Include="Scripts\angular-cookies.js" />
    <Content Include="Scripts\angular-cookies.min.js" />
    <Content Include="Scripts\angular-csp.css" />
    <Content Include="Scripts\angular-loader.js" />
    <Content Include="Scripts\angular-loader.min.js" />
    <Content Include="Scripts\angular-messages.js" />
    <Content Include="Scripts\angular-messages.min.js" />
    <Content Include="Scripts\angular-mocks.js" />
    <Content Include="Scripts\angular-resource.js" />
    <Content Include="Scripts\angular-resource.min.js" />
    <Content Include="Scripts\angular-route.js" />
    <Content Include="Scripts\angular-route.min.js" />
    <Content Include="Scripts\angular-sanitize.js" />
    <Content Include="Scripts\angular-sanitize.min.js" />
    <Content Include="Scripts\angular-scenario.js" />
    <Content Include="Scripts\angular-touch.js" />
    <Content Include="Scripts\angular-touch.min.js" />
    Is there anything I forgot to mention that would help me figure out what is going on?
    What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
    Thank you very much in advance!
    -Igor
    -Igor

    Hi Igor,
    For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
    You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
    https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
    https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
    Best regards, 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT4463 I keep getting the message "The application could not be downloaded. The installation could not be started."  with a "Retry" and "Cancel" button,  I have been re-trying for several hours to no avail.  What is the problem?

    I keep getting the message "The application could not be downloaded. The installation could not be started."  with a "Retry" and "Cancel" button,  I have been re-trying for several hours to no avail.  What is the problem?

    You'll need to contact support and have them check your account
    https://expresslane.apple.com/GetproductgroupList.action

  • I have the 20gb iPod that I need to put music back onto with my new computer. It starts to sync then it says "ITunes could not copy the song to the iPod because the file could not be read or written. ????

    I have a 20gb iPod that needs music from ITunes. On my new computer I am trying to sync but I get error message "could not copy to iPod because file could not be read or written. Attempting to copy to the disk failed. The disk could not be read from or written to." I have tried several times and have reset to factory settings.

    Is the new PC running XP as well, Chalotte?
    If so, I might start with the following document (your error message is a possible symptom of the issue too):
    iTunes displays -50 error message when syncing iPod on Windows XP

  • Has anyone seen this before,? some import operations were not performed , could not copy the file to requested location

    some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?

    cormacc57361247 wrote:
    has anyone seen this or have a fix?
    Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions...

  • The installer could not be found

    Hi all im using macbook pro retina and boot camp assistnt 5.0.1
    theres a problem after choosing the partition size..
    what i get is the message 'The installer could not be found. Insert your windows installer disc and wait a few seconds for the disc to be recognized.'
    can somebody help me?D:

    You have to insert the USB drive or DVD with Windows 7 on your Mac before partitioning, so you will be able to install Windows

  • 10.5.2 The Installer could not install some files in "/"

    I have tried to upgrade my Inter Mac Mini Core Duo 1.66 to 10.5.2.
    I ran the install through software update and proceeded through the 2 restarts. Once my mini restarted I checked "about my mac" to find that it still said the system was 10.5.1
    I ran software update again to find that on trying to install i now get the message
    Install Failed - The installer could not install some files in "/" please contact the software manufacturer for assistance.
    I then tried the same with the combo updater and got the same message
    I have tried to verfiy my disk or repaire permissions using disk utility for it to completely hang with the spinning beach ball and causes finder to crash.
    I have also booted up with the leopard disk in and tried disk utility which says there are no problem with the disk but disk utility in leopard still hangs
    Can anyone help??
    Is anyone getting the same problem?
    Thanks

    I'm having the same problem installing the Leopard Graphics Update on my Dual 2.5 G5. Installing 10.5.2 went fine, but afterwards the graphics update would fail to install, with the same error message you got. I tried both Software Update and downloading the standalone installer.
    But wait, there's more! I also can no longer repair permissions using Disk Utility. I get the following message: "Error: The underlying task reported failure on exit." Booting from my Leopard install CD does allow me to fix permissions.
    Lastly, my second internal hard drive is now also behaving oddly, Any time I try to drag a file to the Trash, I get a dialog box telling me: "The item "(file name)" will be deleted immediately. Are you sure you want to continue?"
    I've run DiskWarrior from the CD and tried fsck in Single User mode (no errors found). Nothing seems to help
    I had no problem updating to 10.5.2 on my MacBook, but the update to my desktop has been a real booger. Anyone who can offer any input, I'd sure appreciate it.

  • Installer could not validate the contents of the "BaseSystem"

    Reference the quite volumnious "Installer could not validate the contents of the 'BaseSystem'".
    Given the dual-layer DVD inserted in a single-layer SuperDrive fact, I tried installing just the Base System with nothing else and got the same error. On the surface, this may indicate that even the BaseSystem is spread out between both layers.
    Has anyone tried making a DVD/CD Master sparse image, cloning it to a spare partition, restarting the Mac from this partition and installing Leopard on another partition or other drive? I got this idea from the indispensable "Macfixit.com" web site.
    Would that totally eliminate trying to install an OS from a double-layer DVD in a single-layer Drive?
    So I am trying to determine if anyone has been successful using this image approach.

    If the drive couldn't read DL DVDs, DVD Player would have trouble with most movies. There may be some burned DL DVDs that won't work in some drives, but factory pressed DL disks, such as Leopard, (if not defective) should be readable in any DVD drive. There may be defective discs, or defective drives, but a DL drive is not a requirement. The DL for a DVD drive only applies to its burning capability, not its reading capability.

Maybe you are looking for

  • Adobe Muse CC 2014 keeps crashing on launch

    My version of Adobe Muse CC 2014 keeps crashing on launch. I have tried to reinstall it a few times but this keeps happening. When I open a project, it works untill I close down the project, I get the following message: Can someone please help me wit

  • PHOTOSHOP CS4 AND ILLUSTRATOR CS4 CRASH WORKAROUND

    hey guys i find something interesting!!!! (and this is an obvious sign that adobe didn't test the software but only open and close it while counting money eheh) first of all the clean CS4 install won't work so don't do it! 11.0.0 and 11.0.1 it's the

  • Transforming XHTML to HTML

    Hi all! Here's the deal: I'm trying to transform an XHTML document to HTML using XSLT and the Tranformers in the JAXP. So far, I can get documents that are entirely text (w/ no HTML tags at all) or documents that have tags but no text! Basically, all

  • [SOLVED] Boot 'really' directly, quickly? (using GRUB)

    Hi there, just a silly question: is there a way to boot 'really' directly the OS? I mean, I have Arch only on my hd, so I use hiddenmenu and timeout 0, but it seems that GRUB still wastes time loading useless stuff... or not? Thank you in advance Las

  • Restrict  VA01

    hi, i want restrict VA01 t.code for some users  , how to do this. please help me. regards, jai