The installer encoutered error

The installer encountered error before iTunes could be configured. Error ocurred during installation. Your system has not been modified.

Have you seen this basic troubleshooting article about iTunes installation?
Troubleshooting installing iTunes or Quicktime for Windows
-Kylene

Similar Messages

  • Trying to download icloud control panel - only getting so far.  Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.  Your system has not been modified.  To retry these operations at ltr time, pls run again.

    First time on here... so not sure if doing correctly.
    I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok).  I only get so far - 2 times I've tried it.  Keep getting message:
    The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
    Your system has not been modified. To retry these operations at a later time, please run the installer again.
    huh?

    As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
    Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
    Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
    - Right click on "my computer"
    - Select the "Advanced" tab
    - Click on "Environment Variables"
    Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
    Or you may just go to a DOS Prompt and type the following commands:
    1 - %temp% and hit enter
    2 - %tmp% and hit enter
    to both of these commands you will get a reply such as:
    'c:\temp' is not recognized as an internal or external command, operable program or bath files.
    So by looking at the reply you can see that my temp folder is c:\temp
    The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
    I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
    IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
    Hope it helps.

  • New 7.6 iTunes64Setup.exe "The installer encountered errors before iTunes..

    I am using Vista 64 bit. Used 64 bit IE to download the proper file
    iTunes64Setup.exe
    from
    http://www.apple.com/itunes/download/
    But I get this error when I try to install:
    The installer encountered errors before iTunes could be configured.
    To retry these operations at a later time, please run the installer again.
    Click Finish to exit the installer.
    I tried installing when logged in as an administrator, and again as a a user, again same results. I tried uninstalling 32 bit iTunes 7.5 and rebooting, but the issue still remains. I manually wiped away the
    c:\Program Files (x86)\iTunes
    directory (had only one file in there after uninstall), same problem.
    FYI, this is just my secondary machine, so I'm not worried about loosing anything. So registry cleaning likely. But first, I'll try installing on a pristine 64 bit Vista virtual machine, just to see if the installer binary itself runs correctly on a machine without a history of iTunes 32 bit.
    Is this a known issue with 7.6 64 bit? Is there a workaround?
    There are many search hits for similar errors under 7.5 32 bit, but I seem to be alone with this error with 64 bit installer, for now...

    FYI, I downloaded iTunes64Setup.exe again (not from cache), despite same exact filesize on my hard drive, this time, no install error, problem solved. So perhaps Apple uses no built-in CRC error detection, but at least it works now. I'm so glad 64 bit Vista is finally properly supported without errors about CD burning when you start it (I never bothered with the gear drivers workaround).
    I did notice it still installs in the
    C:\Program Files (x86)\iTunes
    directory despite being a 64 bit app, not sure if that matters, and not sure if it's a side effect of having 32 bit version in that directory previously.

  • The installer encountered errors before apple mobile device support could be configured

    I'm having issues with installing apple mobile device support. Every time I try to install apple mobile device support I get this annoying message:
    the installer encountered errors before apple mobile device support could be configured
    I have tried these two ideas with no luck.
    Had this issue, and none of the solutions above worked, here is what I did to fix the issue, Install Itunes like you normally would, admin rights ect. When you get the error message "Itunes errors occurred during installation before itunes could be configured" do not click finish, leave that folder up, no navigate to your appdata directory such as example C:\Users\Your Username\appdata\local\temp, inside there look for a file called iTunes64Setup.log or iTunes32Setup1850.log, open that up and scroll down, look for these key things as in example, "Executing: "C:\windows\system32\msiexec.exe" /i "C:\Users\Crusisxx\AppData\Local\Temp\IXP593.TMP\iTunes64.msi" INSTALL_SUPPORT_PACKAGES=1" so I would navigate inside the folder in my temp called "IXP593.TMP, there you will find all the installation packages, copy all of those files and paste either on your desktop or a new folder ect, once done you can now click finish on the failed itunes installer, now whether or not where ever you decided to place your files you copied from that temp folder you will want to run Itunes64.msi or Itunes.msi ect, and run the installer, you should now have successfully of installed Itunes.
    Itunes 11.1.1 Errors occurred during installation...
    I got it. I just first uninstalled iTunes then this:
    1.Open up the Command Prompt as an Administrator (Go to All Programs > Accessories and Right Click on Command Prompt and then choose Run as administrator)
    2.Type cd C:\Windows\SysWOW64
    3.Type regsvr32 vbscript.dll (This registers VB Script with your computer.)
    4.Now install iTunes as you normally would by double clicking on the install program and wait for iTunes to finish installing.
    5.Type regsvr32 /u vbscript.dll (This unregisters VB Script with your computer.)
    Re: "This iPod cannot be used because the required software is not installed."
    What else can I do and why is it not working?

    Try this: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • An error occurred during the installation process: error occurred while installing additional adobe

    I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB. 

Any one else with same issue? 

Trevor

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • Trying to install iTunes and get this error: "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"

    HELP!!!
    I am trying to install iTunes on my Windows 7 laptop and get this error:
    "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"
    Arghhhhh!! I've tried different browsers and various other things suggested on other posts to no avail  

    Ok people, I think I have found the solution !
    If you click on the start button from your desktop screen.
    Then in the "search programs and files" field type : apple software update - you can find the apple installer.
    Click on the apple software update line and let the machine run it's course. I recommend updating whatever it wants to , ie: safari 5, quicktime, itunes....
    I then restarted my computer and it seems to be working now !
    Good luck everyone !

  • AMDS could not be installed . The installer encountered errors

    After installing ios 7 to my iphone it was necessary to update itunes on my computer (Windows 7 / 64) But this wasn't possible because following error occurs: "Apple Mobile Device Support was't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. ..." The last instance of AMDS, that runs without problems is 5.2.0.6. I have uninstalledItunes and AMDS using the win 7 uninstalling tools. 

    Hello Sterling r,
    I have uninstalled and installed itunes / bonjour / apple software update / apple application support and apple mobile device support several times using the latest update - but that doesn't help. Perhaps I didn't uninstall at the first time in the correct order, so that a part of apple mobile device support remains and now  can't be installed correct ( the installer encountered errors ....) . The german error code in the hardware manager is "Die digitale Signatur der für dieses Gerät erforderlichen Treiber kann nicht überprüft werden. Bei einer vor Kurzem durchgeführten Änderung an Hardware oder Software wurde möglicherweise eine Datei installiert, die falsch signiert oder beschädigt ist. Möglicherweise handelt es sich auch um schädliche Software einer unbekannten Quelle. (Code 52)".   
    Kind regards
    Puls55

  • What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

    What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

    I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.

  • The installer encountered errors before iTunes could be configured...

    ...To retry these operations at a later time, please run the installer again.
    this is all i get at the end of each install attempt for iTunes! it will not download and i don't have a firewall up.
    Any solutions????
    dell latitude d505   Windows XP Pro  

    I get the same thing over and over,im able to download but at the end of the install it gives me error code #1921 and says to retry. What gives,i was up until 8 this MORNING trying to get this to work,what do i have to do??????Im EXTREMELY frustrated

  • Can't install iTunes 10.5.3.3 x64 on Windows 7, the installer encountered errors

    I have uninstalled all of Apple software many times and reinstalled 10.4 x64, which works.  I tried running the installation as administrator.  I gave everyone permission to install.  I have turned off my anti-virus software.  No success.

    Try this approach as it worked in my situation.  Just a shot-
    I found msicuu2.exe (Windows Installer Cleanup Utility) for free and used that tool to remove iTunes from my machine and then reinstalled iTunes. This fixed my problem.  Microsoft use to have the tool on their site to download and no longer do (I can only assume since it was so easy to use that people removed things they shouldn't have and it became to big a pain for Microsoft to deal with).  With that said, I was able to find the tool at another site.  It was an easy fix after I installed the cleanup utility and I had iTunes reinstalled in minutes.
    Was getting errors due to a previous windows installer package corrupted and not deleted. (last itunes update). Download from the internet and run this program selecting Itunes to be removed.  (you won't lose your music content), then restart your computer.  When you restart re-download Itunes 10.5.3  and reinstall.  It will automatically reload a non corrupted installer package and will go find all your music, files, etc. to restore by itself.  No problems what so ever resinstalling and getting all my stuff to add to my new Touch afterwards. 
    note:  I spent hours researching this issue and it worked in my case.  Hopefully it helps-

  • HT203687 Trying to install iCloud on a new Toshiba laptop so I can sync with my iPad and iPhone. I get error message HRRESULT:OX8007OBC9, says the installer encountered errors before iCloud Control Panel 2.0 could be installed. Same problem trying to inst

    Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall  iTunes.

    Quote from: lcwhitlock on 04-April-14, 13:44:09
    Hello darkhawk,
    Thank you for the recommendation.  I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one  - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
    Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
    If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
    http://www.hiren.info/pages/bootcd
    Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

  • Windows could not complete the installation recovery error message with HP recovery discs

    While doing a system recovery on an HP G72-b50US notebook using HP purchased recovery DVD's, the reboot "Welcome" screen always (tried 5 recovery attempts from scratch) generates the error message "Windows could not complete the installation. To install Windows on theis compuiter, restart the installation". any attempt at a reboot, even into safe mode, regenerates this same error message. How does this get fixed to allow completion of the installation process?

    I wish I could tell you.
    I also used the HP factory recovery disks on an 8200 Elite CMT. I used them once before with no problem.
    The second time was a show-stopper. The recovery process would ask for all 4 disks, then the recovery installation would begin, reboot continue on, everything normal.
    Then on the last reboot, when the recovery program stated it was configuring windows, it just quit and stated Windows could not complete the installation.
    I made sure that I had absolutely nothing connected to the PC except the keyboard, mouse and monitor.
    The only thing I can possibly think of was that I installed a Radeon HD 6570 video card which I replaced the Radeon HD 6350 card with. However, both cards are supported in the PC, and I cannot remember if I did the restore with the 6350 the last time or the 6570.
    Now, the reason the ISO file will work is because this is a plain and simple Microsoft Windows 7 ISO file--the very same one that you download when you purchase W7 online from the very same download site.
    It is not PC-specific and will install on any PC in the world.
    A recovery disk is PC-specific, and is a very complicated mish-mash of programs, drivers, operating system, all customized for your specific model PC.  Even something like installing a new hard drive or memory can foul up the works.
    The downside of using the plain MS disk is the only programs and drivers you can install are the ones found on your notebook's support and driver page.
    The upside of using the plain W7 installation, is you normally end up with a better performing PC, free of bloatware and unnecessary running processes.
    For someone like me, it is a non-issue, but for others, they may miss some of the included software.
    But that is better than having a computer that is of no value with no operating system installed, wouldn't you agree?
    Paul

  • "The installation failed" Error

    I am trying to upgrade Acrobat 9 to Acrobat XI on a Mac OSX 10.6.8 system.  I uninstalled Acrobat 9 using the uninstaller in the applications folder.  I then tried to install Acrobat XI Pro and at the very end of the install I get the error:
    "The installation failed."
    "The Installer encountered an error that caused the installation to fail.  Contact the software manufacturer for assistance."
    I tried multiple times logged in under different user accounts and got the same error every time.  I also tried installing Acrobat X Pro with the same results.  Anyone know whats going on here or how to fix it?

    Try following steps:
    Delete the following preferences folders:
         a) ~/Library/Application Support/Adobe/Acrobat/
         b) ~/Library/Caches/Acrobat/
         c) ~/Library/Caches/Acrobat/
         d) ~/Library/Preferences/Acrobat Distiller Prefs
         e) ~/Library/Preferences/Adobe/Acrobat/
    Here ~ represents your home directory.
    Then Goto Applications Folder, If Acrobat folder or application is present there then delete it,
    Empty your trash, Restart the machine and then reinstall the Acrobat.

  • Inconsistency in the installer database error on CS5.5 to OS 10.9.4

    Hi
    Trying to put CS5.5 on a MacBook Pro with OS 10.9.4. In the final "Installation Status" screen, has a triangle warning with Your installation encountered errors at the top. In the box it says "Inconsistency in the installer database. Please restart your computer and install again." Tried that several times now. Any ideas?

    from mylenium,
    Manually delete the caps.db in the caps folder. Just running the cleaner script doesn't resolcve that particular issue as in fact a completely unrelated entry in the database may be causing this and not show up in the tool at all...
    Important Directories

  • I recently installed and uninstalled iTunes, and now I am unable to install again; the installer reads "Errors occurred before iTunes could be installed." Any Suggestions?

    I get an error whenever I try to reinstall iTunes, the installer runs for a few seconds and ends immediately.

    Hello jdelvek
    The article gives troubleshooting steps for issues with installing iTunes.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for

  • Start/End Tags are not being accepted by parse if null.

    The is my database version: BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production PL/SQL Release 11.2.0.2.0 - Production CORE    11.2.0.2.0      Production TNS for Solaris: Version 11.2.0.2.0 - Production NLSRTL Version

  • Refresing the Printer Services (in Windows Environment)

    Hi, We implemented a service which shows the list of the printers to the end user. But the list of printers does not get refreshed when we add or remove a printer from the windows machine where this application is running. Does PrintServices get refr

  • OnMouseOver

    I have 2 javascripts I would like to use, but they both make use of the OnMouseOver behavior. I am having trouble in IE6. The first script is a PVII horizontal menu, which uses the behavior for drop down menus. With both scripts enabled, the action o

  • Transparent videos

    I am trying to play one video on top on the other, with a variable level of transparency for the video on the top. I have put the two videos on two different layers, using light weight JMF. But I cannot change the transparency of the videos. I suppos

  • Error in connection SAP 2007 B PL 11 client to SQL server

    Dear All, I am using SAP 2007 B PL 11. Whenever i am doing change server on client systems and entering the SQL server name and pwd the system gives error: Connection failed: SQLState: '08001' SQL Server Error: 0 [Microsoft][SQL Native Client]Unable