The instruction at "0x005d72b6" referenced memory at "0x0000005c".

Error while opening report.
The instruction at "0x005d72b6" referenced memory at "0x0000005c".  The memory could not be "read".
Click on OK to terminate the program
Click on Cancel to debug the program
I was running this report just fine earlier in the day.  Now I get this error.  Any ideas?
Crystal 2008 off a Universe
BV for cascading prompt
sub reports inside the report.

that error has been generated for every version of crystal.  i find it generally happens when modifying the report from the preview screen and not the design tab.  you may want to clean your temp files out etc it may be that you have no temp space available.

Similar Messages

  • Can't open firefox, get error message: The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read". Firefox won't open at all, not in safe mode or anything. Tried uninstalling and reinstalling, no good, tried creating

    Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
    == This happened ==
    Every time Firefox opened
    == today. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

    The solution is easy.
    Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

  • When I close firefox I get an error message that says:The instruction at 0x7758144 referenced memory @ 0xffffffff, The memory could not be read, how to fix ths?

    I get an error message that says , nsAppShell:EventWindow:firefox.exe... Application E...
    The instruction at 0x7758e1144 referenced memory at 0xffffffff. the memory could not be read. Click on OK to terminate the program. What's wrong and how do I fix it?

    I knew how to do that, sorry. I didn't know if you wanted a copy of each individual report or just the page. Here it is...
    Submitted Crash Reports
    Report ID Date Submitted
    bp-af8afb9c-406f-4843-b5f0-f341c2140704 7/2/2014 7:12 PM
    bp-500df430-465f-44ec-9a7e-c34372140702 7/2/2014 4:52 PM
    bp-2c14d0a2-b4a2-4eee-a72d-85b912140702 7/2/2014 4:51 PM
    bp-2e8bc220-7e16-4291-b3c3-59a7b2140702 7/2/2014 4:50 PM
    bp-ea8a52d4-ff08-48f4-b641-539202140702 7/2/2014 4:49 PM
    bp-7ff8483e-468a-4324-b788-336e02140702 7/2/2014 4:46 PM
    bp-ee0edfa1-f678-428c-868d-1f80b2140702 7/2/2014 4:44 PM
    bp-dd32ccd5-4a84-4582-baa9-d731a2140701 7/1/2014 5:29 PM
    75d1f4f1-730e-4e6d-a9aa-7bf08527c14e 5/14/2014 7:40 PM
    a5d77b9b-5adc-40ed-8926-245f9c1711b2 4/23/2014 6:24 PM
    42ef8c1d-dd05-401f-b91c-15633c5080f5 2/17/2014 2:33 PM
    0a233130-e0e9-4a78-ac7c-70ce42d07fcd 2/17/2014 2:33 PM
    90b4e67a-5655-4dbf-96aa-b1ceb622cffb 2/17/2014 2:33 PM
    1222611d-88cd-4c2b-a165-48dc2ae60888 2/17/2014 2:33 PM
    921660a9-b14c-4b71-81c0-4864f246f531 2/17/2014 2:32 PM
    84c51953-118a-4b16-a65c-5b0472c31885 2/17/2014 2:32 PM
    b12c8c12-b5d2-4028-8804-7831fff1e059 2/17/2014 2:32 PM
    fa608271-c2c6-4ff2-8fee-dd12d9cddca5 2/17/2014 2:32 PM
    110a075b-5209-4b48-98fb-51f6c18747b7 2/17/2014 2:32 PM
    f6b7c7f8-edb5-4c8a-9f9d-95cdf9dae28f 2/17/2014 2:32 PM
    38df997b-6c08-4b04-9e10-79114e21b087 2/17/2014 2:32 PM
    58e8b80b-0482-4df7-874e-e3c051e3a390 2/17/2014 2:32 PM
    2649763b-3e51-414c-87a9-c429e2542a1c 2/17/2014 2:32 PM
    f3323912-ee94-40ac-9378-891cf8d04454 2/17/2014 2:32 PM
    db9a70c3-8de0-4b52-b7f2-999da7fa4584 2/17/2014 2:32 PM
    ac6c20aa-fd8b-4068-8fee-777fddba34a9 2/17/2014 2:32 PM
    86068336-7d23-42de-ae1e-30c58f38ed20 2/17/2014 2:32 PM
    da68f0b9-1b9f-4fc6-b16d-1f7b3e57a111 2/17/2014 2:32 PM
    a5a07386-14fb-44e3-aabe-2dcf350980f8 2/17/2014 2:32 PM
    3f447cee-1105-416e-9b66-163fcb2f25fb 2/17/2014 2:32 PM
    968c04e0-00bd-4489-8ac3-13e2100b0f70 2/17/2014 2:32 PM
    84a12490-7aff-43a3-8b18-e596eef73ece 2/17/2014 2:32 PM
    8f5bc390-2805-41df-8d60-48c2b6b61816 2/17/2014 2:32 PM
    088af5c3-ec72-47a6-be3e-5635daf4bd7c 2/17/2014 2:32 PM
    30f469f8-4802-4708-ad13-01b0f69a5087 2/17/2014 2:32 PM
    33080078-0b63-4db7-8f06-0ae2547e8118 2/17/2014 2:32 PM
    f03a4616-d0bb-41a6-b322-b5edfbaaede8 2/17/2014 2:32 PM
    577bb1ab-2f33-4707-b3f5-a89fab3ecdfb 2/17/2014 2:32 PM
    e05818d0-59b2-4e32-aa85-88a76401a12c 2/17/2014 2:32 PM
    0d6c09fa-bc59-438a-b306-7775f4339846 2/17/2014 2:32 PM
    95d256b1-f1d2-4443-99f1-2373246e2c40 2/17/2014 2:32 PM
    fa943610-9b45-4e01-ba2e-137fff6b0278 2/17/2014 2:32 PM
    1d918c94-c13e-4e1b-89f6-6931e0aa99a8 2/17/2014 2:32 PM
    b7a0218c-de80-4a2f-9aea-8df9bda565fe 2/17/2014 2:32 PM
    9b9d142f-e411-4529-840d-b0ad9bae57e6 2/17/2014 2:32 PM
    cbdc8180-d488-4a74-954a-2b209954cee9 2/17/2014 2:32 PM
    b0d7cb88-4f57-4650-8863-d085d7eaa255 2/17/2014 2:32 PM
    fc56f033-1b12-4588-8ffb-8742245d8e0b 2/17/2014 2:32 PM
    603c27c7-d40e-45bb-8a23-85cd5e3ad974 2/17/2014 2:32 PM
    03778c8d-1e07-4532-a692-cc13200c9bd8 2/17/2014 2:32 PM
    e8a1bcbd-9109-48a3-9d4b-7ad2c66ba12f 2/17/2014 2:32 PM
    5c063da2-6949-44cf-9f8a-12d45e41b053 2/17/2014 2:32 PM
    6758ff53-9c38-472f-83b0-466c7d38080a 2/17/2014 2:32 PM
    a252f676-f745-415b-b640-5eb8df5cbc6d 2/17/2014 2:32 PM
    a0ffc786-3e64-4d41-8518-1545ec39ca90 2/17/2014 2:32 PM
    922ea6d5-6204-4a10-8208-68dddef1afcb 2/17/2014 2:32 PM
    8bf8a1b9-33ce-48df-9f73-36d09da7d3b2 2/17/2014 2:00 PM

  • The instruction at 0x100072b8 referenced memory at same could not be read-error message always appears at startup and cannot be eliminated.

    firefox.exe - Application Error
    The instruction at 0x100072b8 referenced memory at 0x100072b8. The memory could not be read.
    Click on OK to terminate the program
    Click on CANCEL to debug the program
    Either of the above options terminates Mozilla - neither option fixes the problem - however Mozilla works as long as the error message remains on the desktop.

    We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
    Mylenium

  • "The instruction at "0x1000865c" referenced memory at "0x1000865c'. The memory could not be "read".

    Firefox 7 crahes on startup. I get a dialog that says "The instruction at "0x1000865c" referenced memory at "0x1000865c'. The memory could not be "read". I've tried everything- clean installs, renamed profile, etc., and this happens even when starting in safe mode. Any ideas? Thanks
    BTW, I don't have a
    "submitted" subfolder in Crash Reports. All I have is two files and neither has the typical crash report ID. Also, I'm running an XP/SP3 laptop. All was find until I accepted the update!
    Thanks

    On my .Net application, I put this code to solve this problem on exiting the program:
    Private Sub BatchOrganizerForm_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing 
    If Me.pdfViewFile IsNot Nothing Then
    System.Threading.Thread.Sleep(2000)
    Me.pdfViewFile.Dispose()Application.DoEvents()
    End If
    End Sub
    I think the problem is you must give time to dispose first the pdf control before the application.
    This code worked for me. I hope this helps.

  • The instruction at "0x000000019" referenced memory at"0x000000019" . The memory could not be "read".

    Hi,
    this topic came up several times the last years, so it may not depend on the version of LabVIEW.
    We are running LV7.0 (EXE) on WinXP. The application works several hours fine when this error occur:
    The instruction at "0x000000019" referenced memory at"0x000000019" . The memory could not be "read".
    Yes, we have re-installed the system with latest NiDAQmx driver and so on ..
    No, we are not using DLL, CIN or something like this.
    What can I do ? My custumer is not amused ...
    Every hint is welcome
    - Jochen -

    I'm not sure what is causing it, but since it happens after several hours it sounds like it might be a "memory leak" where an array allocation or something of that nature is growing, not being properly deallocated, and eventually hitting a memory boundary. Could you give us a little more detail what you are doing, also there are somethings that have caused that type of problems in the past. A search of previous posting, etc. for memory leak produces a number of threads. Also to look for this one might start the program and note the amount of memory LabVIEW is taking using the "Task Manager" in Windows. Then looking at the numbers a while later (an hour or so) should tell you pretty quickly if this is an issue.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • The instruction at 0x7788869b referenced memory at 0x00000050. The memory could not be read

    When I try to use the vanishing point tool in photoshop cs4, I get all the way through the process of the vanishing point and when I click ok to apply photoshop crashes and I get the following error message.
    The instruction at 0x7788869b referenced memory at 0x00000050. The memory could not be read
    I have tried updating my NVIDIA vid card drivers but this didn't help...can anybody help me with this?
    M.

    Pretty much standard advice applies...
    Things to try:
    1. Try disabling OpenGL drawing (closing and reopening Photoshop afterward to test), and update your video drivers from the web site of the maker of your video card.
    2. Reset Photoshop preferences to defaults by pressing and holding Control-Shift-Alt immediately after starting Photoshop, then confirming the deletion.
    3. Ferret out any non-standard fonts that may be corrupted or incompatible Photoshop.
    4. Check your system for malware.
    5. Check your Windows system integrity (e.g., SFC /VERIFYONLY and SFC /SCANNOW commands).
    6. Reinstall Photoshop and make sure it's up to the latest patch level.
    -Noel

  • "The instruction at "0x0fb99b9c7" referenced memory at"0x00000000. The memory could not be "read". T

    "The instruction at "0x0fb99b9c7" referenced memory at"0x00000000. The memory could not be "read". This Application Error pop up on my screen, what i can do?

    We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
    Mylenium

  • The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be read

    When viewing a PDF file in a browser using Adobe Reader v9.0 I received - The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be read.
    This occured in Google Crome after viewing a pdf file and then closing the Crome application. I was also able to reproduce this in a .NET application using the System.Windows.Forms.WebBrowser control and loading PDF files in the browser control.
    The error does not occur every time but can be reproduced in my .NET application fairly easily by loading several pdf files quickly then closing the application.
    This error does not occur when using Adobe Reader v8.

    On my .Net application, I put this code to solve this problem on exiting the program:
    Private Sub BatchOrganizerForm_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing 
    If Me.pdfViewFile IsNot Nothing Then
    System.Threading.Thread.Sleep(2000)
    Me.pdfViewFile.Dispose()Application.DoEvents()
    End If
    End Sub
    I think the problem is you must give time to dispose first the pdf control before the application.
    This code worked for me. I hope this helps.

  • When I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both fin

    when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
    == This happened ==
    Every time Firefox opened
    == this morning 22/07/10

    Lyall,
    I have seen this before, a long time ago (several years), and I cannot
    remember how/if we resolved it.
    If this is an impotant issue to you, I suggest that you open a case with
    BEA support.
    Regards,
    Peter.
    Got a Question? Ask BEA at http://askbea.bea.com
    The views expressed in this posting are solely those of the author, and BEA
    Systems, Inc. does not endorse any of these views.
    BEA Systems, Inc. is not responsible for the accuracy or completeness of
    the
    information provided
    and assumes no duty to correct, expand upon, delete or update any of the
    information contained in this posting.
    Lyall Pearce wrote:
    The title says it all really.
    I see other posts getting replies.
    This is a rather important issue, I have seen another post with a similar problem.
    While not being a show-stopper it certainly raises concerns.
    The application works ok until the application exits (in both development and
    executable form)
    Apparently this did not happen with Tux 7.1
    It does with 8, I do not have 7.1 so I have no workaround.
    ..Lyall

  • When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".

    Hi Team
    Please help me with this.
    Error : When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".
    Version : 29
    OS : windows 2003
    Any suggestions ?

    Thanks for the reply !
    At this moment i cannot upgrade this to next version. So can someone suggest me the fix for the issue ?
    thanks in advance!

  • Error Reported : The instruction at 0xe7c49714 referenced memory at 0x0000000. The Memory could not be read. Click on OK to terminate the program

    Hi
    All  Got an Error Message when i was restarting the VM after some thing
    Please look in to this
    The instruction at 0xe7c49714 referenced memory at 0x0000000. The Memory could not be read.
    Click on OK to terminate the program

    Hi Ayaz_Shaikh,
    What’s your host OS?
    Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
    Alex Zhao
    TechNet Community Support

  • Application error reads: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

    The following error message appears when launching Firefox: Application error: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

    Hi Ayaz_Shaikh,
    What’s your host OS?
    Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
    Alex Zhao
    TechNet Community Support

  • On Windows XP SP3, Firefox 17.0.1 crashes upon exit with this error: "The instruction at "0x7c84495d" referenced memory at "0xf94d9326". The mem could not be r

    Here is the error in total: "The instruction at "0x7c84495d" referenced memory at "0xf94d9326". The memory could not be "read. I have tested this on several of our workstations, all with the same error.
    I have started FF in Safe Mode and the error comes up. I've uninstalled it, renamed the install directory and still the error persists. I've updated the plugins to no avail. In Windows 7, this issue does not occur. Since it crashed upon exit, the Crash Recorder doesn't come up.

    I've already started Firefox in Safemode and the same issue persists. I've also gone in and manually disabled all add-ons and againk the same issue.

  • How do I fix Application error "The instruction at 0x77a42245 referenced memory at 0x77f174e8. The memory could not be read"

    I updated my Firefox to 19.1 and since then Firefox will not respond and gives the following error message ""The instruction at 0x77a42245 referenced memory at 0x77f174e8. The memory could not be read. Clic on OK to terminate the program. When you click OK then Firefox crashes. How do I fix this please?

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website.
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

Maybe you are looking for

  • Best practice for if/else when one outcome results in exit [Bash]

    I have a bash script with a lot of if/else constructs in the form of if <condition> then <do stuff> else <do other stuff> exit fi This could also be structured as if ! <condition> then <do other stuff> exit fi <do stuff> The first one seems more stru

  • Invoking BPEL process from ADF...

    All, I have deployed one BPEL process and invoking the same process from ADF test page. I created one Webservice Data Control for this process and did drag and drop to ADF page. It is working fine as expected. When I created data control, I gave the

  • Change of additional acct. assignment in automatically created line items

    Hello, How can we change the additional account assignment of automatically created line items in transaction MIRO. In my case the tax line item is created automatically in MIRO. I am able to change the account assignment of consumption line item. Bu

  • How to display images in forms

    What are the steps to display images (say logo) in forms when running on web ? null

  • RuntimeException in Message-Mapping in E-FILING UK

    Hi expert, We attempted to submit our P35 for APSL (G5) - EOY submission payroll area, but received an error when we tried to execute the transmission to HMRC. The error says in GG_submission : -- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30