The instruction at"0x10007dba" referenced memory at "0x7c90e514" The memory could not be "written"

When trying to open firefox receive application error message with ok to terminate and cancel to debug - window then closes & program is unusable.
complete error message titled firefox.exe - Application Error
The instruction at "0x10007dba" referenced memory at "0x7c90e514". The memory could not be "written".
Click on OK to terminate the program Click on CANCEL to debug the program
After clicking OK or CANCEL the program does not start
I've tried uninstalling and reinstalling with the same problem

Hi ahelena-
I do not know precisely why you are getting this error. I would suggest doing a full uninstall, and then installing the latest version.
* Get the latest version here: http://www.mozilla.org/en-US/firefox/new/
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
I hope that helps!

Similar Messages

  • LabVIEW 7.1 reports an applicatio​n error 'instructi​on adresses memory at 0x00000000 - ... could not be written' when finishing LabVIEW, even when not running any private code

    Hi there,
    I have found similar Qs here, but this one is _somehow_ different.
    My quite large app (>600 VIs) uses some DLL calls to communicate with medical devices. It runs OK, AFAIK, even when started several times. BUT I get an error message each time I when finishing LabVIEW 7.1 (even when just having loaded the app!!!). The error message states that "The instruction at 0x778cca36 adresses memory at 0x00000000. The process 'written' could not be done on that memory. Click to close the app".
    Any clues?
    My system: Athlon64 3000+ with 1GB of RAM running W2k German with all availabel SPs, LabVIEW 7.1 English with all support files from the devellopr suite May05 edition. System was set up 2 days ago on a fresh PC. The old system showed the very same behavior.
    My opinion is, that simply loading an app and than removing it should not cause such an error??!!
    Greetings from Germany!
    Uwe
    Attachments:
    Application_Error_LabVIEW_when_finishing.jpg ‏20 KB

    I can't look at your code because I don't have LV 7.1, but I would recommend searching on the side of the DLL.
    Do you have the source for the DLL? Can you be sure that the DLL doesn't somehow have a memory addressing bug? The DLL will be loadsd as soon as the program is loaded AFAIK, so maybe when unloading the DLL an error occurs because something isn't initialised properly. I've never programmed a DLL, so I may be way wrong, but my instinct tells me that the problem will most likely be with the DLL.
    Hope this helps
    Shane.
    Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

  • Can't open firefox, get error message: The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read". Firefox won't open at all, not in safe mode or anything. Tried uninstalling and reinstalling, no good, tried creating

    Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
    == This happened ==
    Every time Firefox opened
    == today. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

    The solution is easy.
    Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

  • Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

    I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
    Can anyone help me sort this out? If I log in as someone else Firefox works?
    == This happened ==
    Every time Firefox opened
    == the computer shut down unexpectedly ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can o a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • When I close firefox I get an error message that says:The instruction at 0x7758144 referenced memory @ 0xffffffff, The memory could not be read, how to fix ths?

    I get an error message that says , nsAppShell:EventWindow:firefox.exe... Application E...
    The instruction at 0x7758e1144 referenced memory at 0xffffffff. the memory could not be read. Click on OK to terminate the program. What's wrong and how do I fix it?

    I knew how to do that, sorry. I didn't know if you wanted a copy of each individual report or just the page. Here it is...
    Submitted Crash Reports
    Report ID Date Submitted
    bp-af8afb9c-406f-4843-b5f0-f341c2140704 7/2/2014 7:12 PM
    bp-500df430-465f-44ec-9a7e-c34372140702 7/2/2014 4:52 PM
    bp-2c14d0a2-b4a2-4eee-a72d-85b912140702 7/2/2014 4:51 PM
    bp-2e8bc220-7e16-4291-b3c3-59a7b2140702 7/2/2014 4:50 PM
    bp-ea8a52d4-ff08-48f4-b641-539202140702 7/2/2014 4:49 PM
    bp-7ff8483e-468a-4324-b788-336e02140702 7/2/2014 4:46 PM
    bp-ee0edfa1-f678-428c-868d-1f80b2140702 7/2/2014 4:44 PM
    bp-dd32ccd5-4a84-4582-baa9-d731a2140701 7/1/2014 5:29 PM
    75d1f4f1-730e-4e6d-a9aa-7bf08527c14e 5/14/2014 7:40 PM
    a5d77b9b-5adc-40ed-8926-245f9c1711b2 4/23/2014 6:24 PM
    42ef8c1d-dd05-401f-b91c-15633c5080f5 2/17/2014 2:33 PM
    0a233130-e0e9-4a78-ac7c-70ce42d07fcd 2/17/2014 2:33 PM
    90b4e67a-5655-4dbf-96aa-b1ceb622cffb 2/17/2014 2:33 PM
    1222611d-88cd-4c2b-a165-48dc2ae60888 2/17/2014 2:33 PM
    921660a9-b14c-4b71-81c0-4864f246f531 2/17/2014 2:32 PM
    84c51953-118a-4b16-a65c-5b0472c31885 2/17/2014 2:32 PM
    b12c8c12-b5d2-4028-8804-7831fff1e059 2/17/2014 2:32 PM
    fa608271-c2c6-4ff2-8fee-dd12d9cddca5 2/17/2014 2:32 PM
    110a075b-5209-4b48-98fb-51f6c18747b7 2/17/2014 2:32 PM
    f6b7c7f8-edb5-4c8a-9f9d-95cdf9dae28f 2/17/2014 2:32 PM
    38df997b-6c08-4b04-9e10-79114e21b087 2/17/2014 2:32 PM
    58e8b80b-0482-4df7-874e-e3c051e3a390 2/17/2014 2:32 PM
    2649763b-3e51-414c-87a9-c429e2542a1c 2/17/2014 2:32 PM
    f3323912-ee94-40ac-9378-891cf8d04454 2/17/2014 2:32 PM
    db9a70c3-8de0-4b52-b7f2-999da7fa4584 2/17/2014 2:32 PM
    ac6c20aa-fd8b-4068-8fee-777fddba34a9 2/17/2014 2:32 PM
    86068336-7d23-42de-ae1e-30c58f38ed20 2/17/2014 2:32 PM
    da68f0b9-1b9f-4fc6-b16d-1f7b3e57a111 2/17/2014 2:32 PM
    a5a07386-14fb-44e3-aabe-2dcf350980f8 2/17/2014 2:32 PM
    3f447cee-1105-416e-9b66-163fcb2f25fb 2/17/2014 2:32 PM
    968c04e0-00bd-4489-8ac3-13e2100b0f70 2/17/2014 2:32 PM
    84a12490-7aff-43a3-8b18-e596eef73ece 2/17/2014 2:32 PM
    8f5bc390-2805-41df-8d60-48c2b6b61816 2/17/2014 2:32 PM
    088af5c3-ec72-47a6-be3e-5635daf4bd7c 2/17/2014 2:32 PM
    30f469f8-4802-4708-ad13-01b0f69a5087 2/17/2014 2:32 PM
    33080078-0b63-4db7-8f06-0ae2547e8118 2/17/2014 2:32 PM
    f03a4616-d0bb-41a6-b322-b5edfbaaede8 2/17/2014 2:32 PM
    577bb1ab-2f33-4707-b3f5-a89fab3ecdfb 2/17/2014 2:32 PM
    e05818d0-59b2-4e32-aa85-88a76401a12c 2/17/2014 2:32 PM
    0d6c09fa-bc59-438a-b306-7775f4339846 2/17/2014 2:32 PM
    95d256b1-f1d2-4443-99f1-2373246e2c40 2/17/2014 2:32 PM
    fa943610-9b45-4e01-ba2e-137fff6b0278 2/17/2014 2:32 PM
    1d918c94-c13e-4e1b-89f6-6931e0aa99a8 2/17/2014 2:32 PM
    b7a0218c-de80-4a2f-9aea-8df9bda565fe 2/17/2014 2:32 PM
    9b9d142f-e411-4529-840d-b0ad9bae57e6 2/17/2014 2:32 PM
    cbdc8180-d488-4a74-954a-2b209954cee9 2/17/2014 2:32 PM
    b0d7cb88-4f57-4650-8863-d085d7eaa255 2/17/2014 2:32 PM
    fc56f033-1b12-4588-8ffb-8742245d8e0b 2/17/2014 2:32 PM
    603c27c7-d40e-45bb-8a23-85cd5e3ad974 2/17/2014 2:32 PM
    03778c8d-1e07-4532-a692-cc13200c9bd8 2/17/2014 2:32 PM
    e8a1bcbd-9109-48a3-9d4b-7ad2c66ba12f 2/17/2014 2:32 PM
    5c063da2-6949-44cf-9f8a-12d45e41b053 2/17/2014 2:32 PM
    6758ff53-9c38-472f-83b0-466c7d38080a 2/17/2014 2:32 PM
    a252f676-f745-415b-b640-5eb8df5cbc6d 2/17/2014 2:32 PM
    a0ffc786-3e64-4d41-8518-1545ec39ca90 2/17/2014 2:32 PM
    922ea6d5-6204-4a10-8208-68dddef1afcb 2/17/2014 2:32 PM
    8bf8a1b9-33ce-48df-9f73-36d09da7d3b2 2/17/2014 2:00 PM

  • The instruction at 0x100072b8 referenced memory at same could not be read-error message always appears at startup and cannot be eliminated.

    firefox.exe - Application Error
    The instruction at 0x100072b8 referenced memory at 0x100072b8. The memory could not be read.
    Click on OK to terminate the program
    Click on CANCEL to debug the program
    Either of the above options terminates Mozilla - neither option fixes the problem - however Mozilla works as long as the error message remains on the desktop.

    We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
    Mylenium

  • "The instruction at "0x1000865c" referenced memory at "0x1000865c'. The memory could not be "read".

    Firefox 7 crahes on startup. I get a dialog that says "The instruction at "0x1000865c" referenced memory at "0x1000865c'. The memory could not be "read". I've tried everything- clean installs, renamed profile, etc., and this happens even when starting in safe mode. Any ideas? Thanks
    BTW, I don't have a
    "submitted" subfolder in Crash Reports. All I have is two files and neither has the typical crash report ID. Also, I'm running an XP/SP3 laptop. All was find until I accepted the update!
    Thanks

    On my .Net application, I put this code to solve this problem on exiting the program:
    Private Sub BatchOrganizerForm_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing 
    If Me.pdfViewFile IsNot Nothing Then
    System.Threading.Thread.Sleep(2000)
    Me.pdfViewFile.Dispose()Application.DoEvents()
    End If
    End Sub
    I think the problem is you must give time to dispose first the pdf control before the application.
    This code worked for me. I hope this helps.

  • The instruction at "0x000000019" referenced memory at"0x000000019" . The memory could not be "read".

    Hi,
    this topic came up several times the last years, so it may not depend on the version of LabVIEW.
    We are running LV7.0 (EXE) on WinXP. The application works several hours fine when this error occur:
    The instruction at "0x000000019" referenced memory at"0x000000019" . The memory could not be "read".
    Yes, we have re-installed the system with latest NiDAQmx driver and so on ..
    No, we are not using DLL, CIN or something like this.
    What can I do ? My custumer is not amused ...
    Every hint is welcome
    - Jochen -

    I'm not sure what is causing it, but since it happens after several hours it sounds like it might be a "memory leak" where an array allocation or something of that nature is growing, not being properly deallocated, and eventually hitting a memory boundary. Could you give us a little more detail what you are doing, also there are somethings that have caused that type of problems in the past. A search of previous posting, etc. for memory leak produces a number of threads. Also to look for this one might start the program and note the amount of memory LabVIEW is taking using the "Task Manager" in Windows. Then looking at the numbers a while later (an hour or so) should tell you pretty quickly if this is an issue.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • The instruction at 0x7788869b referenced memory at 0x00000050. The memory could not be read

    When I try to use the vanishing point tool in photoshop cs4, I get all the way through the process of the vanishing point and when I click ok to apply photoshop crashes and I get the following error message.
    The instruction at 0x7788869b referenced memory at 0x00000050. The memory could not be read
    I have tried updating my NVIDIA vid card drivers but this didn't help...can anybody help me with this?
    M.

    Pretty much standard advice applies...
    Things to try:
    1. Try disabling OpenGL drawing (closing and reopening Photoshop afterward to test), and update your video drivers from the web site of the maker of your video card.
    2. Reset Photoshop preferences to defaults by pressing and holding Control-Shift-Alt immediately after starting Photoshop, then confirming the deletion.
    3. Ferret out any non-standard fonts that may be corrupted or incompatible Photoshop.
    4. Check your system for malware.
    5. Check your Windows system integrity (e.g., SFC /VERIFYONLY and SFC /SCANNOW commands).
    6. Reinstall Photoshop and make sure it's up to the latest patch level.
    -Noel

  • "The instruction at "0x0fb99b9c7" referenced memory at"0x00000000. The memory could not be "read". T

    "The instruction at "0x0fb99b9c7" referenced memory at"0x00000000. The memory could not be "read". This Application Error pop up on my screen, what i can do?

    We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
    Mylenium

  • The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be read

    When viewing a PDF file in a browser using Adobe Reader v9.0 I received - The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be read.
    This occured in Google Crome after viewing a pdf file and then closing the Crome application. I was also able to reproduce this in a .NET application using the System.Windows.Forms.WebBrowser control and loading PDF files in the browser control.
    The error does not occur every time but can be reproduced in my .NET application fairly easily by loading several pdf files quickly then closing the application.
    This error does not occur when using Adobe Reader v8.

    On my .Net application, I put this code to solve this problem on exiting the program:
    Private Sub BatchOrganizerForm_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing 
    If Me.pdfViewFile IsNot Nothing Then
    System.Threading.Thread.Sleep(2000)
    Me.pdfViewFile.Dispose()Application.DoEvents()
    End If
    End Sub
    I think the problem is you must give time to dispose first the pdf control before the application.
    This code worked for me. I hope this helps.

  • When I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both fin

    when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
    == This happened ==
    Every time Firefox opened
    == this morning 22/07/10

    Lyall,
    I have seen this before, a long time ago (several years), and I cannot
    remember how/if we resolved it.
    If this is an impotant issue to you, I suggest that you open a case with
    BEA support.
    Regards,
    Peter.
    Got a Question? Ask BEA at http://askbea.bea.com
    The views expressed in this posting are solely those of the author, and BEA
    Systems, Inc. does not endorse any of these views.
    BEA Systems, Inc. is not responsible for the accuracy or completeness of
    the
    information provided
    and assumes no duty to correct, expand upon, delete or update any of the
    information contained in this posting.
    Lyall Pearce wrote:
    The title says it all really.
    I see other posts getting replies.
    This is a rather important issue, I have seen another post with a similar problem.
    While not being a show-stopper it certainly raises concerns.
    The application works ok until the application exits (in both development and
    executable form)
    Apparently this did not happen with Tux 7.1
    It does with 8, I do not have 7.1 so I have no workaround.
    ..Lyall

  • When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".

    Hi Team
    Please help me with this.
    Error : When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".
    Version : 29
    OS : windows 2003
    Any suggestions ?

    Thanks for the reply !
    At this moment i cannot upgrade this to next version. So can someone suggest me the fix for the issue ?
    thanks in advance!

  • Error Reported : The instruction at 0xe7c49714 referenced memory at 0x0000000. The Memory could not be read. Click on OK to terminate the program

    Hi
    All  Got an Error Message when i was restarting the VM after some thing
    Please look in to this
    The instruction at 0xe7c49714 referenced memory at 0x0000000. The Memory could not be read.
    Click on OK to terminate the program

    Hi Ayaz_Shaikh,
    What’s your host OS?
    Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
    Alex Zhao
    TechNet Community Support

  • Application error reads: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

    The following error message appears when launching Firefox: Application error: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

    Hi Ayaz_Shaikh,
    What’s your host OS?
    Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
    Alex Zhao
    TechNet Community Support

Maybe you are looking for

  • Handling update and insert in a database table

    Hi guys, I have some data in a database table which I created.Every day some new records come into the table.what i want is that if the account no of the new record which comes say today already exists in the table hen I do not insert a new record bu

  • Is Elements Organizer 9 robust (powerful) enough to organize 10,000 photos without crashing?

    I'm scanning literally thousands of photos from my 40 years as a photographer. I'm currently using Elements Organizer 9 to keep them organized using keytags and dates. I want to know if I can trust this basket to hold ALL my "eggs". I'm afraid I may

  • Safari open link in new tab is gone

    hi i have problem with safari(5.0.5) 10.6.7, from the past  2weeks it is behaving very oddly, -.the short menu adressing open link in new tab is not at all appearing , at present i m using on keyboard options -when i enter webpage it opens in the oth

  • Publish separate sites to one MobileMe account?

    I manage several sites from my laptop, which runs iWeb '08. I have just started using iWeb '09 on my desktop at work, and absolutely love it - not to mention that my work computer doesn't freeze up whenever I try to work on complicated sites. I would

  • How do you keep Tags organized when upgrading to PSE 9?

    I installed PSE 9 after using PSE 7 for the last two years. Once it installed and I opened Organizer, Organizer found my existing PSE 7 Catalog and asked if I wanted to convert it. I did, but lost the organization of my Keyword Tags. All my photos re