The instruction at 0x647173d8 referenced memory at 0x00000008. The memory could not be read.

It pops up once and a while when I close a tab/window.

Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open this page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
There are other things that need your attention.
Your system details list shows two Flash Player plugins.
# Shockwave Flash 11.7 r700
# Shockwave Flash 11.6 r602
You should remove the older version.
See "Manually uninstalling a plugin":
*https://support.mozilla.org/kb/Troubleshooting+plugins

Similar Messages

  • "the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

    Hi all,
    I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
    It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
    "the finder cannot complete the operation because some data in [name of
    iMovie file] could not be read or written (Error Code 26)" or the
    message "A project file is missing. The file [name of the QuickTime
    movie inside the project.dv] couldn't be opened and is being skipped."
    This happened suddenly, I was able to save a backup version numerous
    times while working on the project.
    I followed some of Karl Petersen's advise on apple discussions. I opened
    the package contents, and everything seems to be there. The source file
    (original QuickTime movie) is there and can be opened and played. I
    replaced the current project file with the backup in the package
    contents, but that did not change anything. I was able to export the
    movie timeline into a new project as a single clip, but would like to be
    able to copy the current project.
    Thanks for any ideas..

    Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

  • The instruction at 0x6058e1a8 referenced memory at 0x00000008, cannot be read

    firefox.exe - Application Error
    the instruction at 0x6058e1a8 referenced memory at 0x00000008. the
    memory could not be read.
    click on OK to terminate the program.
    ( I see this a lot after I exit a screen or page )

    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 26: http://www.mozilla.org/en-US/firefox/all.html
    if possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Can't open firefox, get error message: The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read". Firefox won't open at all, not in safe mode or anything. Tried uninstalling and reinstalling, no good, tried creating

    Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
    == This happened ==
    Every time Firefox opened
    == today. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

    The solution is easy.
    Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

  • When I close firefox I get an error message that says:The instruction at 0x7758144 referenced memory @ 0xffffffff, The memory could not be read, how to fix ths?

    I get an error message that says , nsAppShell:EventWindow:firefox.exe... Application E...
    The instruction at 0x7758e1144 referenced memory at 0xffffffff. the memory could not be read. Click on OK to terminate the program. What's wrong and how do I fix it?

    I knew how to do that, sorry. I didn't know if you wanted a copy of each individual report or just the page. Here it is...
    Submitted Crash Reports
    Report ID Date Submitted
    bp-af8afb9c-406f-4843-b5f0-f341c2140704 7/2/2014 7:12 PM
    bp-500df430-465f-44ec-9a7e-c34372140702 7/2/2014 4:52 PM
    bp-2c14d0a2-b4a2-4eee-a72d-85b912140702 7/2/2014 4:51 PM
    bp-2e8bc220-7e16-4291-b3c3-59a7b2140702 7/2/2014 4:50 PM
    bp-ea8a52d4-ff08-48f4-b641-539202140702 7/2/2014 4:49 PM
    bp-7ff8483e-468a-4324-b788-336e02140702 7/2/2014 4:46 PM
    bp-ee0edfa1-f678-428c-868d-1f80b2140702 7/2/2014 4:44 PM
    bp-dd32ccd5-4a84-4582-baa9-d731a2140701 7/1/2014 5:29 PM
    75d1f4f1-730e-4e6d-a9aa-7bf08527c14e 5/14/2014 7:40 PM
    a5d77b9b-5adc-40ed-8926-245f9c1711b2 4/23/2014 6:24 PM
    42ef8c1d-dd05-401f-b91c-15633c5080f5 2/17/2014 2:33 PM
    0a233130-e0e9-4a78-ac7c-70ce42d07fcd 2/17/2014 2:33 PM
    90b4e67a-5655-4dbf-96aa-b1ceb622cffb 2/17/2014 2:33 PM
    1222611d-88cd-4c2b-a165-48dc2ae60888 2/17/2014 2:33 PM
    921660a9-b14c-4b71-81c0-4864f246f531 2/17/2014 2:32 PM
    84c51953-118a-4b16-a65c-5b0472c31885 2/17/2014 2:32 PM
    b12c8c12-b5d2-4028-8804-7831fff1e059 2/17/2014 2:32 PM
    fa608271-c2c6-4ff2-8fee-dd12d9cddca5 2/17/2014 2:32 PM
    110a075b-5209-4b48-98fb-51f6c18747b7 2/17/2014 2:32 PM
    f6b7c7f8-edb5-4c8a-9f9d-95cdf9dae28f 2/17/2014 2:32 PM
    38df997b-6c08-4b04-9e10-79114e21b087 2/17/2014 2:32 PM
    58e8b80b-0482-4df7-874e-e3c051e3a390 2/17/2014 2:32 PM
    2649763b-3e51-414c-87a9-c429e2542a1c 2/17/2014 2:32 PM
    f3323912-ee94-40ac-9378-891cf8d04454 2/17/2014 2:32 PM
    db9a70c3-8de0-4b52-b7f2-999da7fa4584 2/17/2014 2:32 PM
    ac6c20aa-fd8b-4068-8fee-777fddba34a9 2/17/2014 2:32 PM
    86068336-7d23-42de-ae1e-30c58f38ed20 2/17/2014 2:32 PM
    da68f0b9-1b9f-4fc6-b16d-1f7b3e57a111 2/17/2014 2:32 PM
    a5a07386-14fb-44e3-aabe-2dcf350980f8 2/17/2014 2:32 PM
    3f447cee-1105-416e-9b66-163fcb2f25fb 2/17/2014 2:32 PM
    968c04e0-00bd-4489-8ac3-13e2100b0f70 2/17/2014 2:32 PM
    84a12490-7aff-43a3-8b18-e596eef73ece 2/17/2014 2:32 PM
    8f5bc390-2805-41df-8d60-48c2b6b61816 2/17/2014 2:32 PM
    088af5c3-ec72-47a6-be3e-5635daf4bd7c 2/17/2014 2:32 PM
    30f469f8-4802-4708-ad13-01b0f69a5087 2/17/2014 2:32 PM
    33080078-0b63-4db7-8f06-0ae2547e8118 2/17/2014 2:32 PM
    f03a4616-d0bb-41a6-b322-b5edfbaaede8 2/17/2014 2:32 PM
    577bb1ab-2f33-4707-b3f5-a89fab3ecdfb 2/17/2014 2:32 PM
    e05818d0-59b2-4e32-aa85-88a76401a12c 2/17/2014 2:32 PM
    0d6c09fa-bc59-438a-b306-7775f4339846 2/17/2014 2:32 PM
    95d256b1-f1d2-4443-99f1-2373246e2c40 2/17/2014 2:32 PM
    fa943610-9b45-4e01-ba2e-137fff6b0278 2/17/2014 2:32 PM
    1d918c94-c13e-4e1b-89f6-6931e0aa99a8 2/17/2014 2:32 PM
    b7a0218c-de80-4a2f-9aea-8df9bda565fe 2/17/2014 2:32 PM
    9b9d142f-e411-4529-840d-b0ad9bae57e6 2/17/2014 2:32 PM
    cbdc8180-d488-4a74-954a-2b209954cee9 2/17/2014 2:32 PM
    b0d7cb88-4f57-4650-8863-d085d7eaa255 2/17/2014 2:32 PM
    fc56f033-1b12-4588-8ffb-8742245d8e0b 2/17/2014 2:32 PM
    603c27c7-d40e-45bb-8a23-85cd5e3ad974 2/17/2014 2:32 PM
    03778c8d-1e07-4532-a692-cc13200c9bd8 2/17/2014 2:32 PM
    e8a1bcbd-9109-48a3-9d4b-7ad2c66ba12f 2/17/2014 2:32 PM
    5c063da2-6949-44cf-9f8a-12d45e41b053 2/17/2014 2:32 PM
    6758ff53-9c38-472f-83b0-466c7d38080a 2/17/2014 2:32 PM
    a252f676-f745-415b-b640-5eb8df5cbc6d 2/17/2014 2:32 PM
    a0ffc786-3e64-4d41-8518-1545ec39ca90 2/17/2014 2:32 PM
    922ea6d5-6204-4a10-8208-68dddef1afcb 2/17/2014 2:32 PM
    8bf8a1b9-33ce-48df-9f73-36d09da7d3b2 2/17/2014 2:00 PM

  • The instruction at 0x100072b8 referenced memory at same could not be read-error message always appears at startup and cannot be eliminated.

    firefox.exe - Application Error
    The instruction at 0x100072b8 referenced memory at 0x100072b8. The memory could not be read.
    Click on OK to terminate the program
    Click on CANCEL to debug the program
    Either of the above options terminates Mozilla - neither option fixes the problem - however Mozilla works as long as the error message remains on the desktop.

    We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
    Mylenium

  • "The instruction at "0x1000865c" referenced memory at "0x1000865c'. The memory could not be "read".

    Firefox 7 crahes on startup. I get a dialog that says "The instruction at "0x1000865c" referenced memory at "0x1000865c'. The memory could not be "read". I've tried everything- clean installs, renamed profile, etc., and this happens even when starting in safe mode. Any ideas? Thanks
    BTW, I don't have a
    "submitted" subfolder in Crash Reports. All I have is two files and neither has the typical crash report ID. Also, I'm running an XP/SP3 laptop. All was find until I accepted the update!
    Thanks

    On my .Net application, I put this code to solve this problem on exiting the program:
    Private Sub BatchOrganizerForm_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing 
    If Me.pdfViewFile IsNot Nothing Then
    System.Threading.Thread.Sleep(2000)
    Me.pdfViewFile.Dispose()Application.DoEvents()
    End If
    End Sub
    I think the problem is you must give time to dispose first the pdf control before the application.
    This code worked for me. I hope this helps.

  • The instruction at "0x000000019" referenced memory at"0x000000019" . The memory could not be "read".

    Hi,
    this topic came up several times the last years, so it may not depend on the version of LabVIEW.
    We are running LV7.0 (EXE) on WinXP. The application works several hours fine when this error occur:
    The instruction at "0x000000019" referenced memory at"0x000000019" . The memory could not be "read".
    Yes, we have re-installed the system with latest NiDAQmx driver and so on ..
    No, we are not using DLL, CIN or something like this.
    What can I do ? My custumer is not amused ...
    Every hint is welcome
    - Jochen -

    I'm not sure what is causing it, but since it happens after several hours it sounds like it might be a "memory leak" where an array allocation or something of that nature is growing, not being properly deallocated, and eventually hitting a memory boundary. Could you give us a little more detail what you are doing, also there are somethings that have caused that type of problems in the past. A search of previous posting, etc. for memory leak produces a number of threads. Also to look for this one might start the program and note the amount of memory LabVIEW is taking using the "Task Manager" in Windows. Then looking at the numbers a while later (an hour or so) should tell you pretty quickly if this is an issue.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • The instruction at 0x7788869b referenced memory at 0x00000050. The memory could not be read

    When I try to use the vanishing point tool in photoshop cs4, I get all the way through the process of the vanishing point and when I click ok to apply photoshop crashes and I get the following error message.
    The instruction at 0x7788869b referenced memory at 0x00000050. The memory could not be read
    I have tried updating my NVIDIA vid card drivers but this didn't help...can anybody help me with this?
    M.

    Pretty much standard advice applies...
    Things to try:
    1. Try disabling OpenGL drawing (closing and reopening Photoshop afterward to test), and update your video drivers from the web site of the maker of your video card.
    2. Reset Photoshop preferences to defaults by pressing and holding Control-Shift-Alt immediately after starting Photoshop, then confirming the deletion.
    3. Ferret out any non-standard fonts that may be corrupted or incompatible Photoshop.
    4. Check your system for malware.
    5. Check your Windows system integrity (e.g., SFC /VERIFYONLY and SFC /SCANNOW commands).
    6. Reinstall Photoshop and make sure it's up to the latest patch level.
    -Noel

  • "The instruction at "0x0fb99b9c7" referenced memory at"0x00000000. The memory could not be "read". T

    "The instruction at "0x0fb99b9c7" referenced memory at"0x00000000. The memory could not be "read". This Application Error pop up on my screen, what i can do?

    We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
    Mylenium

  • The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be read

    When viewing a PDF file in a browser using Adobe Reader v9.0 I received - The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be read.
    This occured in Google Crome after viewing a pdf file and then closing the Crome application. I was also able to reproduce this in a .NET application using the System.Windows.Forms.WebBrowser control and loading PDF files in the browser control.
    The error does not occur every time but can be reproduced in my .NET application fairly easily by loading several pdf files quickly then closing the application.
    This error does not occur when using Adobe Reader v8.

    On my .Net application, I put this code to solve this problem on exiting the program:
    Private Sub BatchOrganizerForm_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing 
    If Me.pdfViewFile IsNot Nothing Then
    System.Threading.Thread.Sleep(2000)
    Me.pdfViewFile.Dispose()Application.DoEvents()
    End If
    End Sub
    I think the problem is you must give time to dispose first the pdf control before the application.
    This code worked for me. I hope this helps.

  • When I Close firefox v34 I get nsAppShell:EventWindow firefox.exe instruction at "0x05d2230e referenced memory at "0x00000004". The memory could not be "read"

    Running Windows XP Pro SP3. Changed a monitor today and at some point afterward, every time I close Firefox, I receive the following Error Message "nsAppShell:EventWindow firefox.exe - Instruction at "0x05d2230e referenced memory at "0x00000004". The memory could not be "read". The next time I start Firefox it seems to work normally. I did try resetting Firefox, but no difference so I restored it to a previous session as the Reset eliminated all of my history, bookmarks, etc.

    Hello driadmin, go for a clean re-install, this means you '''remove Firefox program files and then reinstall Firefox'''. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org/firefox/all/ this page] (full installer) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default on Windows:
    *C:\Program Files\Mozilla Firefox
    *C:\Program Files (x86)\Mozilla Firefox
    Now, go ahead and reinstall Firefox:
    #Double-click the downloaded installation file and go through the steps of the installation wizard.
    #Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Thank you.

  • When I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both fin

    when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
    == This happened ==
    Every time Firefox opened
    == this morning 22/07/10

    Lyall,
    I have seen this before, a long time ago (several years), and I cannot
    remember how/if we resolved it.
    If this is an impotant issue to you, I suggest that you open a case with
    BEA support.
    Regards,
    Peter.
    Got a Question? Ask BEA at http://askbea.bea.com
    The views expressed in this posting are solely those of the author, and BEA
    Systems, Inc. does not endorse any of these views.
    BEA Systems, Inc. is not responsible for the accuracy or completeness of
    the
    information provided
    and assumes no duty to correct, expand upon, delete or update any of the
    information contained in this posting.
    Lyall Pearce wrote:
    The title says it all really.
    I see other posts getting replies.
    This is a rather important issue, I have seen another post with a similar problem.
    While not being a show-stopper it certainly raises concerns.
    The application works ok until the application exits (in both development and
    executable form)
    Apparently this did not happen with Tux 7.1
    It does with 8, I do not have 7.1 so I have no workaround.
    ..Lyall

  • When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".

    Hi Team
    Please help me with this.
    Error : When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".
    Version : 29
    OS : windows 2003
    Any suggestions ?

    Thanks for the reply !
    At this moment i cannot upgrade this to next version. So can someone suggest me the fix for the issue ?
    thanks in advance!

  • Error Reported : The instruction at 0xe7c49714 referenced memory at 0x0000000. The Memory could not be read. Click on OK to terminate the program

    Hi
    All  Got an Error Message when i was restarting the VM after some thing
    Please look in to this
    The instruction at 0xe7c49714 referenced memory at 0x0000000. The Memory could not be read.
    Click on OK to terminate the program

    Hi Ayaz_Shaikh,
    What’s your host OS?
    Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
    Alex Zhao
    TechNet Community Support

Maybe you are looking for