The Instruction exectued at '0x602085e4' referenced memory at '0x602085e4'. The memory could not be "read"

This is the message I get when I try to use Workstation client dll on Windows NT
4, service pack 6a using either Powerbuilder 5 or Powerbuilder 7.
The attachment is a screen capture of the dialog.
If we call tpinit() with a null parameter (no security), Powerbuilder itself will
generate this message on exit.
I have yet to try with a tpinfo buffer with valid data loaded - I will follow
up on this post if I get any different results (I don't expect to)
This happens whether we are running the app within PB or we generate an EXE file
and run that.
The application itself works fine, multiple tpinit(), tpcall() and tpterm()'s
all ok - up until application exit.
We even had trace turned on, the trace looked fine (tperm() = 1)
It would appear that something is going wrong with the workstation client dll
unload but I can't be sure of that.
I have created a Console C program which uses the workstation dll on WinNT. This
works fine. It appears to be only PB that is having the problem.
Any help would be gratefully appreciated.
..Lyall
[PB Failure dialog.bmp]

Lyall,
I have seen this before, a long time ago (several years), and I cannot
remember how/if we resolved it.
If this is an impotant issue to you, I suggest that you open a case with
BEA support.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Lyall Pearce wrote:
The title says it all really.
I see other posts getting replies.
This is a rather important issue, I have seen another post with a similar problem.
While not being a show-stopper it certainly raises concerns.
The application works ok until the application exits (in both development and
executable form)
Apparently this did not happen with Tux 7.1
It does with 8, I do not have 7.1 so I have no workaround.
..Lyall

Similar Messages

  • Referenced memory could not be read - error

    Hey, In an application on stop command, I exit from labivew on exit I get an error the referenced memory could not be read click ok to terminate program can any one suggest why this error is seen
    how this can be resolved?
    enclosed a screen shot of error
    Regards
    anil
    Attachments:
    error log.PNG ‏6 KB

    Hi AndreasC,
    This error message occurs when LabVIEW memory space goes corrupt and is often due a DLL or CIN code.
    There can be two reasons for this:
    1. Try removing all DLL calls in your code and see if it works. Most of the time, the corruption is traced to a call to a DLL function that has incorrectly passed inputs to the Call Library Function node, often by passing an uninitialized string or array, or by writing past the bounds of the string or array in the DLL function. Some DLL functions assume that a string buffer is presized to 256 bytes, 1 KB, or some other size. If a smaller sized string buffer is passed, the DLL can write past the buffer and corrupt the dataspace that follows.
    2. This error can also be caused when running a LabVIEW built executable. If the VI calls a WinAPI DLL function and uses the full path to the DLL in the Call Library Function Node, the LabVIEW Application Builder will create a copy of the DLL in the data directory of the executable. Some DLLs such as WinAPI DLLs should only reside in one location, such as C:\WINDOWS\system32, otherwise errors/crashes can occur when called. To prevent this, remove the DLL path in the Call Library Function Node when calling WinAPI DLLs.
    Some users have faced similar problems and the above solutions have worked for them.
    Here are the links to those discussions:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=67230&requireLogin=False
    http://forums.ni.com/ni/board/message?board.id=170&thread.id=229434&view=by_date_ascending&page=1
    Regards,
    Ujjval

  • The instruction at  referenced memory could not be read !!!!!

    Hello All,
    Can someone please advice on the disp+work.exe error?
    I installed Netweaver 2004s ABAP Edition close to six months back and everything was working fine till a few weeks back.
    When i click START APPLICATION SERVER
    I get the following POP UP errors:-
    The instruction at "0x43488c08" referenced memory at "0x43488c08". The memory could not be read.
    The instruction at "0x43562646" referenced memory at "0x43562646". The memory could not be read.
    The instruction at "0x435624d0" referenced memory at "0x435624d0". The memory could not be read.
    The instruction at "0x43567a055" referenced memory at "0x43567a055". The memory could not be read.
    The instruction at "0x4351249e" referenced memory at "0x4351249e". The memory could not be read.
    The instruction at "0x4355c194" referenced memory at "0x4355c194". The memory could not be read.
    The instruction at "0x4353437b" referenced memory at "0x4353437b". The memory could not be read.
    The instruction at "0x017cf903" referenced memory at "0x017cf903". The memory could not be read.
    The instruction at "0x017cf963" referenced memory at "0x017cf963". The memory could not be read.
    Then disp+work.exe STOPS!!
    I have UNINSTALLED and reinstalled multiple times, but i get the same error again and again.
    Can someone please advice??
    This was my previous thread on the same topic(did not find a solution)
    Re: disp + work .exe does not START
    Computer Configuration:-
    Windows XP home SP2
    P4 2.4Ghz
    2 x 512MB RAM
    Thanks
    <b></b><b></b><b></b>

    2 GB is still too small especially for 2004s based products (if installing J2EE too, 2 GB is already too small for J2EE only).
    Let Windows Manager the pagefilesize!
    regards
    Peter

  • Can't open firefox, get error message: The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read". Firefox won't open at all, not in safe mode or anything. Tried uninstalling and reinstalling, no good, tried creating

    Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
    == This happened ==
    Every time Firefox opened
    == today. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

    The solution is easy.
    Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

  • When I close firefox I get an error message that says:The instruction at 0x7758144 referenced memory @ 0xffffffff, The memory could not be read, how to fix ths?

    I get an error message that says , nsAppShell:EventWindow:firefox.exe... Application E...
    The instruction at 0x7758e1144 referenced memory at 0xffffffff. the memory could not be read. Click on OK to terminate the program. What's wrong and how do I fix it?

    I knew how to do that, sorry. I didn't know if you wanted a copy of each individual report or just the page. Here it is...
    Submitted Crash Reports
    Report ID Date Submitted
    bp-af8afb9c-406f-4843-b5f0-f341c2140704 7/2/2014 7:12 PM
    bp-500df430-465f-44ec-9a7e-c34372140702 7/2/2014 4:52 PM
    bp-2c14d0a2-b4a2-4eee-a72d-85b912140702 7/2/2014 4:51 PM
    bp-2e8bc220-7e16-4291-b3c3-59a7b2140702 7/2/2014 4:50 PM
    bp-ea8a52d4-ff08-48f4-b641-539202140702 7/2/2014 4:49 PM
    bp-7ff8483e-468a-4324-b788-336e02140702 7/2/2014 4:46 PM
    bp-ee0edfa1-f678-428c-868d-1f80b2140702 7/2/2014 4:44 PM
    bp-dd32ccd5-4a84-4582-baa9-d731a2140701 7/1/2014 5:29 PM
    75d1f4f1-730e-4e6d-a9aa-7bf08527c14e 5/14/2014 7:40 PM
    a5d77b9b-5adc-40ed-8926-245f9c1711b2 4/23/2014 6:24 PM
    42ef8c1d-dd05-401f-b91c-15633c5080f5 2/17/2014 2:33 PM
    0a233130-e0e9-4a78-ac7c-70ce42d07fcd 2/17/2014 2:33 PM
    90b4e67a-5655-4dbf-96aa-b1ceb622cffb 2/17/2014 2:33 PM
    1222611d-88cd-4c2b-a165-48dc2ae60888 2/17/2014 2:33 PM
    921660a9-b14c-4b71-81c0-4864f246f531 2/17/2014 2:32 PM
    84c51953-118a-4b16-a65c-5b0472c31885 2/17/2014 2:32 PM
    b12c8c12-b5d2-4028-8804-7831fff1e059 2/17/2014 2:32 PM
    fa608271-c2c6-4ff2-8fee-dd12d9cddca5 2/17/2014 2:32 PM
    110a075b-5209-4b48-98fb-51f6c18747b7 2/17/2014 2:32 PM
    f6b7c7f8-edb5-4c8a-9f9d-95cdf9dae28f 2/17/2014 2:32 PM
    38df997b-6c08-4b04-9e10-79114e21b087 2/17/2014 2:32 PM
    58e8b80b-0482-4df7-874e-e3c051e3a390 2/17/2014 2:32 PM
    2649763b-3e51-414c-87a9-c429e2542a1c 2/17/2014 2:32 PM
    f3323912-ee94-40ac-9378-891cf8d04454 2/17/2014 2:32 PM
    db9a70c3-8de0-4b52-b7f2-999da7fa4584 2/17/2014 2:32 PM
    ac6c20aa-fd8b-4068-8fee-777fddba34a9 2/17/2014 2:32 PM
    86068336-7d23-42de-ae1e-30c58f38ed20 2/17/2014 2:32 PM
    da68f0b9-1b9f-4fc6-b16d-1f7b3e57a111 2/17/2014 2:32 PM
    a5a07386-14fb-44e3-aabe-2dcf350980f8 2/17/2014 2:32 PM
    3f447cee-1105-416e-9b66-163fcb2f25fb 2/17/2014 2:32 PM
    968c04e0-00bd-4489-8ac3-13e2100b0f70 2/17/2014 2:32 PM
    84a12490-7aff-43a3-8b18-e596eef73ece 2/17/2014 2:32 PM
    8f5bc390-2805-41df-8d60-48c2b6b61816 2/17/2014 2:32 PM
    088af5c3-ec72-47a6-be3e-5635daf4bd7c 2/17/2014 2:32 PM
    30f469f8-4802-4708-ad13-01b0f69a5087 2/17/2014 2:32 PM
    33080078-0b63-4db7-8f06-0ae2547e8118 2/17/2014 2:32 PM
    f03a4616-d0bb-41a6-b322-b5edfbaaede8 2/17/2014 2:32 PM
    577bb1ab-2f33-4707-b3f5-a89fab3ecdfb 2/17/2014 2:32 PM
    e05818d0-59b2-4e32-aa85-88a76401a12c 2/17/2014 2:32 PM
    0d6c09fa-bc59-438a-b306-7775f4339846 2/17/2014 2:32 PM
    95d256b1-f1d2-4443-99f1-2373246e2c40 2/17/2014 2:32 PM
    fa943610-9b45-4e01-ba2e-137fff6b0278 2/17/2014 2:32 PM
    1d918c94-c13e-4e1b-89f6-6931e0aa99a8 2/17/2014 2:32 PM
    b7a0218c-de80-4a2f-9aea-8df9bda565fe 2/17/2014 2:32 PM
    9b9d142f-e411-4529-840d-b0ad9bae57e6 2/17/2014 2:32 PM
    cbdc8180-d488-4a74-954a-2b209954cee9 2/17/2014 2:32 PM
    b0d7cb88-4f57-4650-8863-d085d7eaa255 2/17/2014 2:32 PM
    fc56f033-1b12-4588-8ffb-8742245d8e0b 2/17/2014 2:32 PM
    603c27c7-d40e-45bb-8a23-85cd5e3ad974 2/17/2014 2:32 PM
    03778c8d-1e07-4532-a692-cc13200c9bd8 2/17/2014 2:32 PM
    e8a1bcbd-9109-48a3-9d4b-7ad2c66ba12f 2/17/2014 2:32 PM
    5c063da2-6949-44cf-9f8a-12d45e41b053 2/17/2014 2:32 PM
    6758ff53-9c38-472f-83b0-466c7d38080a 2/17/2014 2:32 PM
    a252f676-f745-415b-b640-5eb8df5cbc6d 2/17/2014 2:32 PM
    a0ffc786-3e64-4d41-8518-1545ec39ca90 2/17/2014 2:32 PM
    922ea6d5-6204-4a10-8208-68dddef1afcb 2/17/2014 2:32 PM
    8bf8a1b9-33ce-48df-9f73-36d09da7d3b2 2/17/2014 2:00 PM

  • "The instruction at "0x1000865c" referenced memory at "0x1000865c'. The memory could not be "read".

    Firefox 7 crahes on startup. I get a dialog that says "The instruction at "0x1000865c" referenced memory at "0x1000865c'. The memory could not be "read". I've tried everything- clean installs, renamed profile, etc., and this happens even when starting in safe mode. Any ideas? Thanks
    BTW, I don't have a
    "submitted" subfolder in Crash Reports. All I have is two files and neither has the typical crash report ID. Also, I'm running an XP/SP3 laptop. All was find until I accepted the update!
    Thanks

    On my .Net application, I put this code to solve this problem on exiting the program:
    Private Sub BatchOrganizerForm_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing 
    If Me.pdfViewFile IsNot Nothing Then
    System.Threading.Thread.Sleep(2000)
    Me.pdfViewFile.Dispose()Application.DoEvents()
    End If
    End Sub
    I think the problem is you must give time to dispose first the pdf control before the application.
    This code worked for me. I hope this helps.

  • The instruction at "0x000000019" referenced memory at"0x000000019" . The memory could not be "read".

    Hi,
    this topic came up several times the last years, so it may not depend on the version of LabVIEW.
    We are running LV7.0 (EXE) on WinXP. The application works several hours fine when this error occur:
    The instruction at "0x000000019" referenced memory at"0x000000019" . The memory could not be "read".
    Yes, we have re-installed the system with latest NiDAQmx driver and so on ..
    No, we are not using DLL, CIN or something like this.
    What can I do ? My custumer is not amused ...
    Every hint is welcome
    - Jochen -

    I'm not sure what is causing it, but since it happens after several hours it sounds like it might be a "memory leak" where an array allocation or something of that nature is growing, not being properly deallocated, and eventually hitting a memory boundary. Could you give us a little more detail what you are doing, also there are somethings that have caused that type of problems in the past. A search of previous posting, etc. for memory leak produces a number of threads. Also to look for this one might start the program and note the amount of memory LabVIEW is taking using the "Task Manager" in Windows. Then looking at the numbers a while later (an hour or so) should tell you pretty quickly if this is an issue.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • The instruction at 0x7788869b referenced memory at 0x00000050. The memory could not be read

    When I try to use the vanishing point tool in photoshop cs4, I get all the way through the process of the vanishing point and when I click ok to apply photoshop crashes and I get the following error message.
    The instruction at 0x7788869b referenced memory at 0x00000050. The memory could not be read
    I have tried updating my NVIDIA vid card drivers but this didn't help...can anybody help me with this?
    M.

    Pretty much standard advice applies...
    Things to try:
    1. Try disabling OpenGL drawing (closing and reopening Photoshop afterward to test), and update your video drivers from the web site of the maker of your video card.
    2. Reset Photoshop preferences to defaults by pressing and holding Control-Shift-Alt immediately after starting Photoshop, then confirming the deletion.
    3. Ferret out any non-standard fonts that may be corrupted or incompatible Photoshop.
    4. Check your system for malware.
    5. Check your Windows system integrity (e.g., SFC /VERIFYONLY and SFC /SCANNOW commands).
    6. Reinstall Photoshop and make sure it's up to the latest patch level.
    -Noel

  • "The instruction at "0x0fb99b9c7" referenced memory at"0x00000000. The memory could not be "read". T

    "The instruction at "0x0fb99b9c7" referenced memory at"0x00000000. The memory could not be "read". This Application Error pop up on my screen, what i can do?

    We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
    Mylenium

  • The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be read

    When viewing a PDF file in a browser using Adobe Reader v9.0 I received - The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be read.
    This occured in Google Crome after viewing a pdf file and then closing the Crome application. I was also able to reproduce this in a .NET application using the System.Windows.Forms.WebBrowser control and loading PDF files in the browser control.
    The error does not occur every time but can be reproduced in my .NET application fairly easily by loading several pdf files quickly then closing the application.
    This error does not occur when using Adobe Reader v8.

    On my .Net application, I put this code to solve this problem on exiting the program:
    Private Sub BatchOrganizerForm_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing 
    If Me.pdfViewFile IsNot Nothing Then
    System.Threading.Thread.Sleep(2000)
    Me.pdfViewFile.Dispose()Application.DoEvents()
    End If
    End Sub
    I think the problem is you must give time to dispose first the pdf control before the application.
    This code worked for me. I hope this helps.

  • When I Close firefox v34 I get nsAppShell:EventWindow firefox.exe instruction at "0x05d2230e referenced memory at "0x00000004". The memory could not be "read"

    Running Windows XP Pro SP3. Changed a monitor today and at some point afterward, every time I close Firefox, I receive the following Error Message "nsAppShell:EventWindow firefox.exe - Instruction at "0x05d2230e referenced memory at "0x00000004". The memory could not be "read". The next time I start Firefox it seems to work normally. I did try resetting Firefox, but no difference so I restored it to a previous session as the Reset eliminated all of my history, bookmarks, etc.

    Hello driadmin, go for a clean re-install, this means you '''remove Firefox program files and then reinstall Firefox'''. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org/firefox/all/ this page] (full installer) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default on Windows:
    *C:\Program Files\Mozilla Firefox
    *C:\Program Files (x86)\Mozilla Firefox
    Now, go ahead and reinstall Firefox:
    #Double-click the downloaded installation file and go through the steps of the installation wizard.
    #Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Thank you.

  • When I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both fin

    when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
    == This happened ==
    Every time Firefox opened
    == this morning 22/07/10

    Lyall,
    I have seen this before, a long time ago (several years), and I cannot
    remember how/if we resolved it.
    If this is an impotant issue to you, I suggest that you open a case with
    BEA support.
    Regards,
    Peter.
    Got a Question? Ask BEA at http://askbea.bea.com
    The views expressed in this posting are solely those of the author, and BEA
    Systems, Inc. does not endorse any of these views.
    BEA Systems, Inc. is not responsible for the accuracy or completeness of
    the
    information provided
    and assumes no duty to correct, expand upon, delete or update any of the
    information contained in this posting.
    Lyall Pearce wrote:
    The title says it all really.
    I see other posts getting replies.
    This is a rather important issue, I have seen another post with a similar problem.
    While not being a show-stopper it certainly raises concerns.
    The application works ok until the application exits (in both development and
    executable form)
    Apparently this did not happen with Tux 7.1
    It does with 8, I do not have 7.1 so I have no workaround.
    ..Lyall

  • When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".

    Hi Team
    Please help me with this.
    Error : When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".
    Version : 29
    OS : windows 2003
    Any suggestions ?

    Thanks for the reply !
    At this moment i cannot upgrade this to next version. So can someone suggest me the fix for the issue ?
    thanks in advance!

  • Error Reported : The instruction at 0xe7c49714 referenced memory at 0x0000000. The Memory could not be read. Click on OK to terminate the program

    Hi
    All  Got an Error Message when i was restarting the VM after some thing
    Please look in to this
    The instruction at 0xe7c49714 referenced memory at 0x0000000. The Memory could not be read.
    Click on OK to terminate the program

    Hi Ayaz_Shaikh,
    What’s your host OS?
    Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
    Alex Zhao
    TechNet Community Support

  • Application error reads: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

    The following error message appears when launching Firefox: Application error: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

    Hi Ayaz_Shaikh,
    What’s your host OS?
    Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
    Alex Zhao
    TechNet Community Support

  • How do I fix Application error "The instruction at 0x77a42245 referenced memory at 0x77f174e8. The memory could not be read"

    I updated my Firefox to 19.1 and since then Firefox will not respond and gives the following error message ""The instruction at 0x77a42245 referenced memory at 0x77f174e8. The memory could not be read. Clic on OK to terminate the program. When you click OK then Firefox crashes. How do I fix this please?

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website.
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

Maybe you are looking for

  • Itunes download

    i I downloaded 7.4.2.4. Tried to install the file and go the message, "Unknown Publisher. File blocked because it does not have a valid signature that identifies publisher." I spent 3 hours on the phone Apple techies and they could not figure it out

  • Problem accessing e.book with the adobe log in details

    Hi I bought an ebook. I downloaded it onto a laptop. I had access t o it no problems. I had a problem with the laptop and I had to change. I am having a problem opening the same book on the new one it is giving me the following error if I log in my A

  • Fails to Launch Console Using OVM Manager 3.0.2 GUI

    hi, I simply want to open a VM using 'Launch Console' on the OVM Manager. So I select the VM, then select 'Launch Console'. A popup window opens which allows to open or download "ovm_rasproxy-ws.jnlp" when i try to open "ovm_rasproxy-ws.jnlp". java w

  • How to implement af:table for Grid Entry screen

    Hi, I am using JDevelper 11.1.1.3g. I have a requirement in which i have to show a dataentry screen in Grid format.Below is my requirement. I want to make a dataentry screen in Grid format. I want to show a table component which will have many rows a

  • How do I get the latest adobe flash player version ?

    how do I get the latest adobe flash player version ? I think the version number is 16 thank you Claricalmette