The interaction of the components - data obtained.

You can use hitTest to register collision detection between components.
But how I can get the data of a column chart, if an animated image (Spark Image, Bitmap, Sprite) moves over it?
Now I see only mouse events.

Buenos Dias,
En primer lugar, me gustaria saber cuales son el hardware y software que tiene para hacer el proyecto.
Saludos.
Felipe Flores
Engenharia de Aplicações
National Instruments Brasil

Similar Messages

Unable to embed data in any of the components

I have an xlf file that contains a series of charts, tables and other components with data embedded in them. As I get new data, I update the previous data. But, currently I am unable to embed data in the existing charts or any other new components that I create. I also have a backup of this file and the backup behaves in the same manner. I restored both these files to earlier versions created last week when I was able to update the embedded data. But I am still not able to make any changes.
I have another xlf file that was created 1-2 months ago and it works fine, so it seems that there is no problem with the software itself.
Any suggestions would be very helpful.

It had occurred to me that the old shutdown/restart routine can cure a multitude of problems. That's what I did and it took care of all of the problems in all my Numbers documents.

How to get the context data using java script in interactive forms

Hi All,
How to get the context data using java script in interactive forms by adobe, am using web dynpro java
thanks.

Hi venkat,
Please Refer this link.
Populating one Drop-Down list from the selection of another Drop-down list
Thanks,
Raju.

How to display the Current Date on page using ADF Components

Hi,
Is there any way to display the system date on a page developed using ADF Components.
I am thinking of writing the java code to display the date. Just wanted to check is there any pre-defined component of ADF that I can make use of.
Could anyone tell me how to do this using ADF components?
Thanks in advance.
Sivaji....

Please refer the below link.
Prompt with default date ( currentdate-1 and current date-8)
http://www.dagira.com/2008/07/15/how-can-i-make-today-my-default-prompt-value/
http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/
Regards,
Bilahari

How to obtain the row data in the component datatable?

if I want to edit a row data, and then know which row is edited in the component datatable, and how to do?
How to obtain the row data in the component datatable, and update it to database, not simplely edit a simple table
Any ideas? Thanks

Thank you very much for your help Alexander !
It's quite confusing when you leave Struts and try to adapt your projects for JSF for the first time...
I wanted to click on a row with a "onMouseClick" on the TR tag like I used to do in Struts/JSTL. But it seems to be impossible in a dataTable.
Ok then. I've added a column at the end of the row with an icon.
But eventually I didn't need to declare link parameters.
In my BackingBean I did like this :
public String selectEventForUpdate() throws IllegalAccessException, InvocationTargetException {
        PortletAgenda event = (PortletAgenda) JSFUtils.getInRequestMap("event");
        BeanUtils.copyProperties(this, event);
        return null;
   }JSFUtils.getInRequestMap(...) is a method I wrote in a util object :
public static Object getInRequestMap(String name) {
        Object res = null;
        Map requestMap=FacesContext.getCurrentInstance().getExternalContext().getRequestMap();
        if (requestMap!=null) {
            res=requestMap.get(name);
        return res;
} " event " is the name of the item in my dataTable list.
My backingBean has the same attributes as "event".
So when the page is reloaded I have a backingBean full with the selected properties to edit/update.
Thanks to your reply I realized that putting this form in the middle of the dataTable seems to be impossible.
So I put this form in a floating DIV in front of the table with a shadow.
It works :o) !
But I'm a little bit disapointed to be honest...
I used to build my web applications with Struts and JSTL and doing this kind of interface was really easy.
I've decided 3 days ago to convert into JSF because the "GUI Layer" seemed to be improved.
But now I realize that I cannot put a onMouseOver and onMouseClick on a row and I cannot display a different row in the middle of a table....
I think it's a shame because there is a facet for header and footer.
And it would be great if we could create our own personal facet that appears only if a condition is true.
For exemple " if the current item id is the same as the request parameter id then display the following facet content ....... (with a panel group and a form inside to update the row) "
It's easy to do that with JSTL thanks to c:forEach and c:if but it seems to be impossible to use JSTL tags like this during the dataTable iteration.
And JSF tags seems to have no logical tags like " if " or loops that can be nested in dataTable.
I really need to realize this interface (you click on a row then an edit form appears where you clicked).
Do I have to write a component myself that extends dataTable?
Do you know if writing such a component is hard to do for a beginner like me?
(I've juste discovered JSF 3 days ago and I've used Struts/JSTL for 2 years til now)
I'd be glad to have much advices from you about that.
Regards

'Valid to' dates for both the Header & the components in the BOM report.

Hi Experts,
My Requirement:
Need to display the 'Valid to' dates for both the Header & the components in the BOM report.
Right now we are using the Functional modules 'GET_STKO' & 'GET_STPO' for the header
& the components respectively. The report gives the correct output for the all the BOM alternatives
which exist. But for the BOM alternatives which have been deleted(updated in STKO-LKENZ)
'Valid to' dates are displayed as'00/00/0000'.
(Note:ECM is used for BOMs)
Is there any Logical Database that I can fetch the 'Valid to' dates of both BOM Header & components
which are deleted?
Regards,
Mahesh

Dear Mahesh,
In my understanding I dont think you cannot get the valid to date for BOM header,unless a ECN,(engineering change number) is
used to set the deletion flag.In otherwords none of the business sets for all these BOM's the valid to date(which means the
default valid to date 31.12.9999 is taken).
Check with this FM, CS_BOM_EXPL_MAT_V2 whether can you get the valid to date for the components(infact here also the
valid from date given in the input screen impacts the report output).
Check and revert back.
Regards
Mangalraj.S

Update the Requirements date of Components MDSB-BDTER in Purchase Order

hi all,
We got a requirement that Requirements date of material components need to be updated for Subcontracting PO's.
This field is displayed only for subcontracting purchase orders.
This is located in ME22N/ME23N in Item detail tab --> material data tab --> click on Components and within that the requirements date need to be updated for each and every line item of purchase order.
could any one please suggest me the procedure to update the date.
Thanks,
Sujatha.

Hi sujatha,
Can u explain more??
But as per my understanding,
that date is updating automatically while creating subcontracting PO you are not suppose to update it manually.
If any query u have revert back to me.
Thanks,
Sanket.

API for getting the build date of development components

Hello ,
we are changing the format of the <about> screen of our application. We show the version of the main development components that are the part of our application.
For the version date of the development components, we were earlier showing the deployment date. However we now plan to change it to their build date. We need to know if there is any API to find the build date of the development components.
Thanks alot in advance for helping!

Hi do you want all the dates from the back date to sysdate or only the particular back date
SQL> select sysdate from dual;
SYSDATE
22-JUN-09
SQL> select sysdate-10 from dual;
SYSDATE-1
12-JUN-09or if you want all the back dates starting from one particular then
SQL> select sysdate-10+level from dual
2 connect by level<=10;
SYSDATE-1
13-JUN-09
14-JUN-09
15-JUN-09
16-JUN-09
17-JUN-09
18-JUN-09
19-JUN-09
20-JUN-09
21-JUN-09
22-JUN-09
10 rows selected.Edited by: oracle_for_dude on Jun 22, 2009 12:11 PM

My iCloud calendar interacts with all of my iOS devices showing the current date, but on my iPad the rest of the calendar is blank. Any suggestions?

My iCloud calendar interacts with all of my iOs devices showing the current date, but on my iPad the rest of the calendar is blank. Any suggestions?

I can help you for the future. Regularly back up your computer to an external hard drive (or cloud alternative). If you have your library backed up, it could be reinstalled on your new computer. In your current situation, you will have to reload all of your CDs as syncing of non-iTunes purchased music is only one way (Computer to iPod)

A query to obtain the communication data (t.code XD03)

Hi All,
I have to create a query to extract the comunication data (mainly email) for each customer.
Which table or database should I use ?
Thanks
gandalf

Hi,
List of tables in which email ids are stored SRIRAGRP, ECAMIOPREMAIL, ADR6, TO24, ADR6S, ADR6S, EFISEL, USR21.
Cheers!!
VEnk@

Need confirmation on the dynamical data mapping to the components..

Hi All,
I would like to map the data dynamically to the combo box componet.
Explanation:
I have created a webi report and imported that report to xcelsius, current the data is only for 50 rows and it may increase or decrease as per the selections.
I would like to map the exact data which is written to the excel to my combo box source data property.could you please let me know whether the source data mapping can be done dynamically ( what ever the rows data are there only those row need to be mapped to the source data) ?
Cheers,
Venkat

Venkat,
The range is always fixed for any component but the display is dynamic(say for a combo box ). The component will behave as if it is increasing or decresing the range at run time by ignoring the blank cells.
When u said the option to change the data mapping, is it related to changing the range or did u want xcelsius to consider new data from else where in excel dynamically ..depending on conditions ?
Thanks,
Karthik

Use MF60 for split the components needs in a horizon of several days

Hi to all,
I'm working in my Industry to migrate the SAP system from a Repetitive mode to a Discrete one, and trying to launch the use of KanBan and MF60 usage, I'm not doing fine.
I want to launch MF60 usage, through the bases of using it to distribute the need of components reserve in a Process Order (or several) in a daily frequency.
I know it is possible to use the pull-list to propose only the replenishment quantity to be used in a time horizon given, for all Process Orders that uses "these" components.
I ask for guidelines, as I don't know if I need to start building Kan Ban signals through PK transactions, or if I need to reconfigure some Material Master Views, as for the moment I'm not able to split the need as it is only proposing me the overall need of the order, even though I have already upload Resources, Master Recipes and Schedules to obtain a distribution in the Process Order lifetime.
From what I know, the desire view to work on is the MF60 "Staging type: WM release order parts".
I'll appreciate any information, or documentation you can share
Regards,
David P

Hi Almeida and thanks for the response.
I'll try to explain myself in a practical way.
Now that it has being upload the Master Data in terms of resources and master recipes to work on a SAP Discrete mode, then I am working on the replenishment of components of the BOM's that are "signed" at the Process Order creation.
My current situation in an example will be: If I create a Process Order for a 7-day duration, it makes the components reserves for the total, nevertheless I want to configure "somewhere"-"somehow" in SAP to be able to use the MF60 transaction to distribute the needs in a given horizon.
With the scenario I have now, if I run the MF60 transaction for "that" order, no matter the horizon, it propose me the replenishment of the total need of the components minus the product already consumed. And even more, I only can run the MF60 with the "SLoc Level" view, and I have notice the distribution I need should be viewed under the "WM RelOrd. Parts" which is giving me a blank data result.
What will be my desire usage of the MF60, is to use it to propose me the needed components inside the given horizon, so if I give a 1-day horizon, and expect to get the components quantity for that day.
I hope, my issue is more clear now
Thanks
David P

Excel SSAS Tabular error: An error occurred during an attempt to establish a connection to the external data source

Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.

Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support

The sort key in the master data G/l account and master data customer

Sort Key
Hi All,
in the master data (control data) of the G/l account XXXXXX (it's a reconciliation account) I've filled in the sort key the value ZZ1 (XBLNR).
Instead, in the master data of a certain customer which has its Reconciliation Account equal to xxxxxx, I've filled in the sort key ZZ2 (BELNR).
Posting a document, I need that the Assignment number is equal to XBLNR.
How could I obtain this?
Thanks a lot
G.

Hi,
You are assign short key with Customer master in ZZ1 (Account Management Tab Bottam).
I think it is helpful to you.
Regards,
Spradip

Error Message: The data provider required to connect to the local data file could not be found. The file will be added to the project but the typed DataSet associated with the file will ont be generated.

I am currently taking the course "C# Fundamentals" from Bob Tabors site: LearnVisualStudio.NET . I'm on day 8 where we are integrating SQL Server with C#. In Lesson 6 and 7, (havent' gotten past these two) I am having an
issue. In Lesson 6, "Retrieving Data with ADONET 2 in a Connected Scenario (SQL Server Compact Edition) when I go to create the data file I get the error message I typed into the title. I cannot get the db to appear in the Solution
Explorer, or open up so I can create a table. When I try to skip by that lesson, and complete lesson7, I'm running into the same basic problem, where the error messages are different but I get an exception when I attempt to run the program. Even
though I have been able to create the table for this lesson, the Exception states I have an invalid object name 'Customers' which is the name of the table. I have tried reading several different suggestions for correcting this issue, but have not understood
exactly what I need to do. Since I work from home on my computer, I do not want to do anything with files or downloads unless I understand what I need to do, cause I do not want to lose my job. Any help would be appreciated.
JennyBarrett7

Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang

The interaction of the components - data obtained.

Similar Messages

Maybe you are looking for