"The interface name given does not specify a valid and existing interface."
Hi nice guys,
I'm trying to use the XNET APIs to set Master task to Slave with LIN protocol. As I have no Experience before, there's something problem like the Interface of the NI USB-8476S can't be detected. The prompted windows presents following infomation:
Error -1074384758 occurred at XNET Create Session (Signal Output Single-point).vi:1
Possible reason(s):
NI-XNET: (Hex 0xBFF6308A) The interface name given does not specify a valid and existing interface. Solution: Use a valid and existing interface. These can be obtained using MAX, XNET system properties, or the LabVIEW XNET Interface IO name. If you are using CompactRIO, refer to the topic "Getting Started with CompactRIO" in the NI-XNET Hardware and Software Help.
but in the NI MAX, the device is detected as "LIN0". Even the interface input control in the NI examples shows the error. But if I take the CAN Frame API, it works well.
Does anyone have some idea. I'm so preciate. Tanks in advance.
best regards
Melo
Melonetern,
When do you receive these errors? Does this happen when you try to run your code or our examples? On top of that, does this error happen immediately or does it take a while? Is this happening in LabVIEW or another interface?
If you could give us the versions of software you are using as well as the XNET driver versions that would be very helpful.
Matt J
Professional Googler and Kudo Addict
National Instruments
Similar Messages
-
DBG1005 : The connection information provided does not specify a valid OWB
Hi,
Need a small help.
actually am inserting data from view as source to table as target in the same schema.
designed mapping and compile and run successfully,but getting the following error OWB.
DBG1005 : The connection information provided does not specify a valid OWB Control Center target schema.
can you pls help me in this regard.
Thanks,
SKMSIs you target schema is registered to OWB.
You can check it by connecting OWB with Repositoty owner.
Global Explorer ->security->Users.
If the user is not there then add the user from here only. -
"Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201)"
This error keeps cropping up now and again on most of our domain controllers (OS-2008 AND 2008R2)...Usually a restart fixes the issue however the issue repeats and security logs don't generate.
Any advice on how to fix this issue permanently would be greatly appreciated.Please see this: https://social.technet.microsoft.com/Forums/windows/en-US/95987ca3-a1b2-4da6-95b7-d825d06cdac7/error-code-4201-the-instance-name-passed-was-not-recognized-as-valid-by-a-wmi-data-provider?forum=w7itprosecurity
You can also try rebuilding the WMI repository: http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Ich habe PSE 12 und Premiere Elements 12 neu installiert und erhalte beim Start die Meldung, Adobe PSE 12 bzw. Premiere Elements 12 Organhizer funktioniere nicht mehr, und ich solle das Programm schliessen. Was kann ich tun?
uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Project does not contain a valid connection problem
I am using JDeveloper 10.1.3.2.0 and have checked out code that was in CVS. I tried to put the code under an Application and Project, but when I do the check out, the Application Navigator shows it at the Application level. Within that Application, there are two projects. When I do a Make on either project, I get the error that The Business Component Project does not contain a valid connection. Double clicking on the error send me to the corresponding .jpx file which contains this:
<?xml version='1.0' encoding='ISO-8859-1' ?>
<!DOCTYPE JboProject SYSTEM "jbo_03_01.dtd">
<JboProject
Name="ViewController"
SeparateXMLFiles="true"
PackageName="" >
<DesignTime>
<Attr Name="_ejbPackage" Value="false" />
<Attr Name="_NamedConnection" Value="Fred" />
<Attr Name="_version" Value="10.1.3.36.73" />
<Attr Name="_jprName" Value="../ViewController.jpr" />
</DesignTime>
</JboProject>
Does anyone know what connection needs to be set up? I wonder if part of the problem is how the CVS check out is working, but I can't seem to get it under an application.
I'd appreciate any help!Hello.,
Thank you so much for the responses! That was the problem. I had defined a database connection, but the name was not the same as what was in the jpx file. The error is now gone. :)
Thanks again! -
Time Capsule does not have a valid IP address
We have 2 computers in our home office: a Win 7 desktop and an iMac.
We have cable internet; the cable modem (Toshiba PCX2500) is plugged (ethernet) directly into the Time Capsule, which we use as our router to the two computers (also by ethernet).
The wireless functionality of the Time Capsule has been turned off.
We’ve been using the Time Capsule like this for the past 18 months (we purchased it new) without any problems.
Last month, however, we began losing our internet connection regularly (about 3-4 times per day) and getting the dreaded golden flashing light (as opposed to solid green) along with the error (paraphrasing here) “the Apple Wi-Fi does not have a valid IP address.”
We hadn’t made any changes in our hardware; it just showed up out of the blue.
After contacting our ISP, we were advised to unplug the cable modem for about 30 seconds, then plug it back it. Most of the time this worked; if not, we had to “cycle” the Time Capsule as well.
We’re now having to do this about 4-5 times per day.
Sometimes the Time Capsule’s status light is still green when we have no internet connection. Out of the blue the connection just isn’t there.
We “cycle” the cable modem and we’re back in business every time.
Additionally, when we actually do have an internet connection, the speeds fluctuate wildly. We’re paying for 15 Mb service; as of the past 4-5 weeks, we get 15Mb about 50% of the time. The other 50% it generally averages between 3Mb and 6Mb.
The ISP’s tech support (we’ve contacted them no less than once a week since this started) swears up and down that it’s the router, not their signal or their equipment in any way. They deny all culpability.
We even had the ISP’s repair people come out on an occasion about 10 days ago to test the signal strength; they reported no problems. “You’ve got great signal strength to your home…” were the exact words.
Similarly, after calling Apple on 2-3 occasions, we get the exact same response: “It’s not the Time Capsule router, it’s your ISP.”
The last Apple technician we spoke with (yesterday) said, “I’ve been doing wireless/Internet tech support for years and I can guarantee you – 100% -- that it’s a ‘DNS caching’ issue. I’m 100% positive that’s your problem, and I’m also 100% positive it’s your ISP’s fault.”
After contacting the ISP again we were informed that they don’t have any such caching problems.
We’re tired and frustrated! Please help.I would suggest running the network via a pc for the day.. pick either your Mac or win7 pc.. you will need to do a bit of fiddling.. even better would be to just borrow a router. Or buy one on a 7day return .. !! Beg borrow.. don't steal. Just get a router other than TC. it won't take long to determine if the TC is the issue.
IMO at 18months you are suffering failure of the TC power supply. early days but it is showing signs of delinquency. And will get worse. But another router will show it up.. if the PC has dual ethernet cards you can run ICS.. or same sort of thing on the imac to the wireless .. ie the PC or Mac becomes the router with direct connection to the cable modem. Then share internet from there.
Once you do that for a day or two, you will quickly be able to track down if the issue is cable service/modem or the TC as router. -
Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
The contained field name "ADTAGR" does not exist in any of the database tab
hı all
how can l solved thıs problem
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ADTAGR" does not exist in any of the database tables from the FROM clause.
Information on where terminated
Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
The main program was "ZQMR_BILDIRIM ".
In the source code you have the termination point in line 732
of the (Include) program "SAPDBZQNQ".
Error occurred during batch input processing
The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
occurred in
procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPDBZQNQ "; its source code begins in line
715 of the (Include program "SAPDBZQNQ ".
FORM put_qmfecat.
DATA: l_tab_fields TYPE rsfs_tab_fields.
DATA: l_ds_clauses TYPE rsds_where.
Dynamische Feldselektion
MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
READ TABLE select_fields WITH KEY l_tab_fields-tablename
INTO l_tab_fields.
IF sy-subrc <> c_rc00.
CLEAR l_tab_fields.
ENDIF.
Dynamische Selektionskriterien
MOVE 'QMFECAT' TO l_ds_clauses-tablename.
READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
INTO l_ds_clauses.
DB-Zugriff
>>>>> SELECT (l_tab_fields-fields) FROM qmfe
INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
WHERE qmnum = rqmqmel-qmnum
AND kzloesch = space
AND (l_ds_clauses-where_tab)
ORDER BY PRIMARY KEY.
regard sinan
Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
Edited by: eyup_sinan on Jan 6, 2012 3:30 PMYou seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
Rob -
The located assembly's manifest definition with name 'openfoundation' does not match the assembly re
Ok. been working on this for the better part of a day. I am having trouble with the .net web controls. trying to create a simple portlet that populates a text box with values from a 2nd text box when a button is selected. both text boxes are in the same portlet.
without using the <httpModules> entry in the web.config file the portlet works fine, but it does pop you out of the portal.
setup: working in a Dev. environment with portal and portlets on the same box.Portal version is 5.0.2.EDK version is 5.0.2.
error:
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///c:/inetpub/wwwroot/netTest
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///c:/inetpub/wwwroot/netTest/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
Com.Plumtree.Remote.Transformer.Condition.GatewayedStandardCondition.UseFilter(HttpContext ctx)
Com.Plumtree.Remote.Transformer.FilterManager.UpdateFilter(HttpContext ctx)
Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e)
System.Web.SyncEventExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +60
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.947
************************************************************Is there any step by step instructions for setting up and using the .net web controls in Plumtree????
There doesn't seem to be any information in one spot as to setting up the environment to use the .Net Web Controls. I have had to piece together information from multipule threads to get this far. I.E. there was nothing in any documentation that I have read that required the installation of the VJ# lib's. (that error took me the first half of the day to resolve :-) )
Thanks for any help,
Greg************************************************************Also, when reviewing the Plumtree_.NET_Web_Controls_InstallLog.log there were 5 nonfatal erros. These error's were:
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll (The process cannot access the file because it is being used by another process)
When installing the Web Control's do you need to stop any services? I didn't see anything in the install notes about doing this? -
We have got 5.0.2 Plumtree portal, EDK 5.0.2 and .Net Web Controls 2.1.
I am trying to call:
IPortletContext oPortletContext = PortletContextFactory.CreatePortletContext(System.Web.HttpContext.Current.Request, System.Web.HttpContext.Current.Response);
I have attached the error I am getting. Is this related to Open Foundation version? This is quite urgent because we are in the process of trying to get a demo together for grabbing Activity Rights.
Server Error in '/portlets/DOJ/JNET/pretzel.clients.doj.reentry' Application.
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///E:/Data/HSTPRDAPP01/Inetpub/plumtree/portlets/DOJ/JNET/pretzel.clients.doj.reentry
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portlets_doj_jnet_pretzel.clients.doj.reentry/26128f6f/cfc1837a/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portlets_doj_jnet_pretzel.clients.doj.reentry/26128f6f/cfc1837a/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///E:/Data/HSTPRDAPP01/Inetpub/plumtree/portlets/DOJ/JNET/pretzel.clients.doj.reentry/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
pretzel.clients.doj.reentry.navigation.Page_Load(Object sender, EventArgs e) in \\devnet2\inetpub\doj\reentry\development\pretzel.clients.doj.reentry\navigation.aspx.cs:22
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +750
Version Information: Microsoft .NET Framework Version:1.1.4322.1031; ASP.NET Version:1.1.4322.947I have seen this before after a upgrade of the EDK, found I had to remove the reference in the C# project to the old EDK dll and re add it to the new EDK dll.
Also noticed that you are using the System.Web.HttpContext.Current fully qualified namespace in the CreatePortletContext() call instead of the usual way of PortletContextFactory.CreatePortletContext(Request, Response) this uses the System.Web.HttpRequest.Page namespace by default. -
The name "Folder" does not exist in the namespace
I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks HalDid you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. -
Attempt to set a parameter name that does not occur in the SQL: vc_temp_1
I have query view object build on the following sql
select
nvl(u.full_name,e.arabic_first_name||' '||e.arabic_family_name) as empName,
(select sc.general_specialty from ta_scientific_certificate sc where sc.user_id=u.user_id
group by sc.general_specialty
Having Max(sc.qualification_kind)>= All (select max(sc1.qualification_kind) from ta_scientific_certificate sc1 where sc1.user_id=u.user_id group by sc1.qualification_kind ) )as general_specialty
, u.*,ur.default_role,ur.role_1,ur.role_2,ur.role_3,ur.role_4,ur.role_5,ur.role_6,ur.role_7
from ta_user u,employee e,TA_USER_ROLES ur
where u.account_enabled='1' and u.emp_id = e.empl_code(+) and ur.user_id=u.user_id(+)
with this query
( (EMP_ID IS NULL ) ) AND (( ( (DEFAULT_ROLE = 4 ) ) OR ( (DEFAULT_ROLE = 6 ) ) )OR( ( (ROLE_1 = 4 ) ) OR ( (ROLE_1 = 6 ) ) )OR( ( (ROLE_2 = 4 ) ) OR ( (ROLE_2 = 6 ) ) )OR( ( (ROLE_3 = 4 ) ) OR ( (ROLE_3 = 6 ) ) )OR( ( (ROLE_4 = 4 ) ) OR ( (ROLE_4 = 6 ) ) )OR( ( (ROLE_5 = 4 ) ) OR ( (ROLE_5 = 6 ) ) )OR( ( (ROLE_6 = 4 ) ) OR ( (ROLE_6 = 6 ) ) )OR( ( (ROLE_7 = 4 ) ) OR ( (ROLE_7 = 6 ) ) ))
I created search page by dragging this view object from MyApplicationModule->NamedCriteria
but i don't want to show all the fields that their names start with ROLE in my search option so I unChecked the attribute queryalbe
no when I press button search the error Attempt to set a parameter name that does not occur in the SQL: vc_temp_1 is shown
if i press OK on error message and click search again it works
how can I make this error disappearno I don't think that i have
this is my source ( I will divide it into two parts)
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
<!---->
<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="SciQualMgtVO"
Version="11.1.2.60.17"
OrderBy='"EMPNAME"'
BindingStyle="OracleName"
CustomQuery="true"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
<Attr Name="_isExpertMode" Value="true"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO_LABEL"/>
</SchemaBasedProperties>
</Properties>
<ViewAccessor
Name="LookupAM_IpaCodesVO_GeneralSpecialityVA"
ViewObjectName="ta.common.lookup.IpaCodesVO"
AMUsageName="LookupAM"
ViewInstanceName="IpaCodesVO_GeneralSpecialityDC"
RowLevelBinds="true"/>
<ViewAccessor
Name="CountryVA"
ViewObjectName="ta.common.lookup.CountryVO"
RowLevelBinds="true"/>
<ViewAccessor
Name="DegreeVA"
ViewObjectName="ta.common.lookup.DegreeVO"
RowLevelBinds="true"/>
<ViewAccessor
Name="LookupAM_IpaCodesVO_ScientificQualificationVA"
ViewObjectName="ta.common.lookup.IpaCodesVO"
AMUsageName="LookupAM"
ViewInstanceName="IpaCodesVO_ScientificQualificationDC"
RowLevelBinds="true"/>
<ViewAccessor
Name="YesNoVA"
ViewObjectName="ta.common.constants.YesNoVO"
RowLevelBinds="true"/>
<ViewAccessor
Name="IpaCodesVO_GeneralSpecialityVA"
ViewObjectName="ta.common.lookup.IpaCodesVO"
RowLevelBinds="true">
<ViewCriteriaUsage
Name="IpaCodesVO_GeneralSpecialityCriteria"
FullName="ta.common.lookup.IpaCodesVO.IpaCodesVO_GeneralSpecialityCriteria"/>
</ViewAccessor>
<ViewAccessor
Name="IpaCodesVO_ScientificQualificationVA"
ViewObjectName="ta.common.lookup.IpaCodesVO"
AMUsageName="LookupAM"
ViewInstanceName="IpaCodesVO_ScientificQualificationDC"
RowLevelBinds="true">
<ViewCriteriaUsage
Name="IpaCodesVO_ScientificQualificationCriteria"
FullName="ta.common.lookup.IpaCodesVO.IpaCodesVO_ScientificQualificationCriteria"/>
</ViewAccessor>
<ListBinding
Name="ar_LOV_GeneralSpecialty"
ListVOName="IpaCodesVO_GeneralSpecialityVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="GeneralSpecialty"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ArabicDescription"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_GeneralSpecialty"
ListVOName="IpaCodesVO_GeneralSpecialityVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="GeneralSpecialty"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishDescription"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_male_LOV_Nationality"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Nationality"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="MaleNational"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_female_LOV_Nationality"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Nationality"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="FemaleNational"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_Nationality"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Nationality"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishNational"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_LOV_ScientificDegree"
ListVOName="IpaCodesVO_ScientificQualificationVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="ScientificDegree"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ArabicDescription"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_ScientificDegree"
ListVOName="IpaCodesVO_ScientificQualificationVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="ScientificDegree"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishDescription"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_ScientificQualification"
ListVOName="DegreeVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="ScientificQualification"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="DegreeCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_LOV_Country"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Country"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ArabicName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="en_LOV_Country"
ListVOName="CountryVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="Country"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="CountryCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="EnglishName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="LOV_PastArbitration"
ListVOName="YesNoVA"
ListRangeSize="-1"
NullValueFlag="none"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="PastArbitration"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="Name"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="LOV_PastCooperation"
ListVOName="YesNoVA"
ListRangeSize="-1"
NullValueFlag="none"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="PastCooperation"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="Name"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="LOV_FutureCooperation"
ListVOName="YesNoVA"
ListRangeSize="-1"
NullValueFlag="none"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="FutureCooperation"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="Code"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="Name"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<ListBinding
Name="ar_LOV_ScientificQualification"
ListVOName="DegreeVA"
ListRangeSize="-1"
NullValueFlag="start"
NullValueId="${adfBundle['oracle.javatools.resourcebundle.SystemBundle']['NULL_VALUE_RESID']}"
MRUCount="0">
<AttrArray Name="AttrNames">
<Item Value="ScientificQualification"/>
</AttrArray>
<AttrArray Name="ListAttrNames">
<Item Value="DegreeCode"/>
</AttrArray>
<AttrArray Name="ListDisplayAttrNames">
<Item Value="ArabicName"/>
</AttrArray>
<DisplayCriteria/>
</ListBinding>
<SQLQuery><![CDATA[select
nvl(u.full_name,e.arabic_first_name||' '||e.arabic_family_name) as empName,
(select sc.general_specialty from ta_scientific_certificate sc where sc.user_id=u.user_id
group by sc.general_specialty
Having Max(sc.qualification_kind)>= All (select max(sc1.qualification_kind) from ta_scientific_certificate sc1 where sc1.user_id=u.user_id group by sc1.qualification_kind ) )as general_specialty
, u.*,ur.default_role,ur.role_1,ur.role_2,ur.role_3,ur.role_4,ur.role_5,ur.role_6,ur.role_7
from ta_user u,employee e,TA_USER_ROLES ur
where u.account_enabled='1' and u.emp_id = e.empl_code(+) and ur.user_id=u.user_id(+)]]></SQLQuery>
<ViewAttribute
Name="Empname"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="255"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="EMPNAME"
Expression="EMPNAME"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Empname_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="GeneralSpecialty"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="GENERAL_SPECIALTY"
Expression="GENERAL_SPECIALTY"
SQLType="VARCHAR"
LOVName="ar_LOV_GeneralSpecialty"
LOVFinder="GeneralSpecialtySwitcher">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="choice"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.GeneralSpecialty_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="UserId"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Type="java.lang.Integer"
ColumnType="NUMBER"
AliasName="USER_ID"
Expression="USER_ID"
SQLType="INTEGER"/>
<ViewAttribute
Name="FullName"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="FULL_NAME"
Expression="FULL_NAME"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.FullName_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="FullNameEn"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="FULL_NAME_EN"
Expression="FULL_NAME_EN"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.FullNameEn_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="TitleSalutation"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="TITLE_SALUTATION"
Expression="TITLE_SALUTATION"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.TitleSalutation_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Nationality"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="3"
Scale="0"
Type="java.lang.Integer"
ColumnType="NUMBER"
AliasName="NATIONALITY"
Expression="NATIONALITY"
SQLType="INTEGER"
LOVName="ar_male_LOV_Nationality"
LOVFinder="NationalitySwitcher">
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="choice"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Nationality_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Gender"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="1"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="GENDER"
Expression="GENDER"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="1"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Gender_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Employer"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="100"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="EMPLOYER"
Expression="EMPLOYER"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="100"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Employer_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="CurrentJob"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CURRENT_JOB"
Expression="CURRENT_JOB"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.CurrentJob_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Degree"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="DEGREE"
Expression="DEGREE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Degree_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Department"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="DEPARTMENT"
Expression="DEPARTMENT"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Department_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="ScientificDegree"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="4"
Scale="0"
Type="java.lang.Integer"
ColumnType="NUMBER"
AliasName="SCIENTIFIC_DEGREE"
Expression="SCIENTIFIC_DEGREE"
SQLType="INTEGER"
LOVName="ar_LOV_ScientificDegree"
LOVFinder="ScientificDegreeSwitcher">
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.ScientificDegree_LABEL"/>
<CONTROLTYPE
Value="choice"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="ScientificQualification"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="SCIENTIFIC_QUALIFICATION"
Expression="SCIENTIFIC_QUALIFICATION"
SQLType="VARCHAR"
LOVName="ar_LOV_ScientificQualification"
LOVFinder="ScientificQualificationSwitcher">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.ScientificQualification_LABEL"/>
<CONTROLTYPE
Value="choice"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Country"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="3"
Scale="0"
Type="java.lang.Integer"
ColumnType="NUMBER"
AliasName="COUNTRY"
Expression="COUNTRY"
SQLType="INTEGER"
LOVName="ar_LOV_Country"
LOVFinder="CountrySwitcher">
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="choice"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Country_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="City"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CITY"
Expression="CITY"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.City_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="ZipCode"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="ZIP_CODE"
Expression="ZIP_CODE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.ZipCode_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="POBox"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="P_O_BOX"
Expression="P_O_BOX"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.POBox_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="CurrentAddress"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="100"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CURRENT_ADDRESS"
Expression="CURRENT_ADDRESS"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="100"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.CurrentAddress_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="WorkPhone"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="WORK_PHONE"
Expression="WORK_PHONE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.WorkPhone_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="HomePhone"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="HOME_PHONE"
Expression="HOME_PHONE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.HomePhone_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="CellPhone"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CELL_PHONE"
Expression="CELL_PHONE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.CellPhone_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Fax"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="FAX"
Expression="FAX"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Fax_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="PermanentAddress"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="100"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="PERMANENT_ADDRESS"
Expression="PERMANENT_ADDRESS"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="100"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.PermanentAddress_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Email"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="EMAIL"
Expression="EMAIL"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.Email_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="Password"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="PASSWORD"
Expression="PASSWORD"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="PastArbitration"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="1"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="PAST_ARBITRATION"
Expression="PAST_ARBITRATION"
SQLType="VARCHAR"
LOVName="LOV_PastArbitration">
<DesignTime>
<Attr Name="_DisplaySize" Value="1"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="radio"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.PastArbitration_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="PastCooperation"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="1"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="PAST_COOPERATION"
Expression="PAST_COOPERATION"
SQLType="VARCHAR"
LOVName="LOV_PastCooperation">
<DesignTime>
<Attr Name="_DisplaySize" Value="1"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="radio"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.PastCooperation_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="FutureCooperation"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="1"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="FUTURE_COOPERATION"
Expression="FUTURE_COOPERATION"
SQLType="VARCHAR"
LOVName="LOV_FutureCooperation">
<DesignTime>
<Attr Name="_DisplaySize" Value="1"/>
</DesignTime>
<Properties>
<SchemaBasedProperties>
<CONTROLTYPE
Value="radio"/>
<LABEL
ResId="ta.model.ro.SciQualMgtVO.FutureCooperation_LABEL"/>
</SchemaBasedProperties>
</Properties>
</ViewAttribute>
<ViewAttribute
Name="EmpId"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="EMP_ID"
Expression="EMP_ID"
SQLType="VARCHAR"
IsQueriable="false">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="LoginName"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="50"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="LOGIN_NAME"
Expression="LOGIN_NAME"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="50"/>
</DesignTime>
</ViewAttribute> -
we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'
App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\). -
Azure - The name 'model' does not exist in the current context
I am getting the error below but only on Azure, everything builds and runs fine on multiple machines running locally. But when I deploy to Azure I get the error below trying to login. Not even sure where to start researching this one
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0103: The name 'model' does not exist in the current context
Source Error:
Line 1: @model Web.Models.LoginViewModelhi,
From the error message, it seems like a MVC issue.
I suggest you could re-configure your web configuration follow those solutions The name 'model' does not exist in current context in MVC3
and
Razor View throwing “The name 'model' does not exist in the current context” .
And then you could try to deploy project to azure again. I think this error may be disappeared. Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
ITunes won't play ANY of my music!
When I select a song and press the spacebar or click the song or whatever, iTunes won't PLAY IT. The timer comes up like it's gonna play but it never starts counting. The icon to select pause comes up instead of the icon to select play in the top lef
-
I have two dynamic texts, both of them are going to generate numbers. If one has a greater value then the other one, a movie clip must be loaded, else, another movie clip must be loaded.
-
I want to change my main email adress in mail. Now it is the apple.me.com address. I would like it to be another one. But I don't know how. Please help! grtz, h
-
Does Apple keep track of crash statistics for iOS apps?
I have been experiencing frequent crashes in a particular iOS app. I have sent emails to the publisher (as have many users) and despite frequent updates, the problem persists. Does Apple track these crashes and use them to re-evaluate the apps?
-
CCMS: CEN configuration - Registration Failed due to RFC : Issue Resolved.
Hi There! I was trying for CEN-CCMS setup and I was bale to connect my other systems to the CEN, infact I was able to connect all the system, but somehow my DEV box is detached from the CEN box. When I try to run sapccmsr -R -j2ee pf= to register wit