The interface type is valid, but the specified interface number is not configured

Hi
I'm all new to using LabVIEW, which I have to use for a project. I'm trying to make a setup with a Keithley 2000 multimeter and an Agilent U2722A SMU. But I can't figure out how to get these instruments to communicate with LabVIEW. I can see and send commands to the Keithley 2000, but not the Agilent U2722A, with Agilent Connection Expert. But when I use LabVIEW I can't see any of them, and if I use the drivers I've found with "NI Instrument Driver Finder - Configure Search" I pops up with an error message saying
"Error -1073807195 occurred at VISA Open in Keithley 2000.lvlib:Initialize.vi->Keithley 2000 Read Multiple.vi?            
Possible reason(s):
VISA:  (Hex 0xBFFF00A5) The interface type is valid, but the specified interface number is not configured.?"
I've read all the threads I could find about this problem, but none of them helped. I've checked that the NiVi488.dll is checked in MAX under the VISA options. When I open the VISA Interactive Control I see an ASRL1>>ASRL1::INSTR and ASRL10>>ASRL10::INSTR. I don't know why it says ASRL, when I'm using an USB/GPIB interface, but the Keithley 2000 have 10 as the address. (the Agilent U2722A is connected directly by USB)
Assume I know nothing.
Thanks

I'm using the GPIB-USB-HS. I also used this on the development PC when I exported the hardware configuration.
This shows up in my MAX config and when I scan instruments, all of them show up. I can query them in MAX no problem.
My installer includes all the .exe's from my project. As I said, I've done this with my previous 2009 installer without any issue. I upgraded my installer since I upgraded my project for version 2013. The error only happens when I run my code.
 

Similar Messages

  • HT5622 when i try to sign in to my Icloud account i get this message"The Apple ID is valid but not an icloud account" i only have the one ID so how do I get around this please

    when I try to sign in to my Icloud account on my windows PC i get this message"The Apple ID is valid but is not an icloud account" i only have the one apple
    ID so how do I get around this please ??

    note I own no other Apple device I just wanted to use icloud for data storage and Itunes

  • Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account.  Please help me and tell me what I am doing wrong.

    Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account.  Please help me and tell me what I am doing wrong. Thx

    Hi DesCoop,
    You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
    Sorry.
    GB

  • HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

    I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid.  I cannnot delete the account because "find my iphone" wants the password linked to this old account.  But when i go into the find my iphone app it is using my corect Apple ID.  How do i fix this?

    If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
    If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account.  You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then  on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

  • I tried to update the App that I purchased but the message told me that my Apple account is not valid for use outside of US and I must switch back to US store to able to do it. How can I switch the account from foreign countries back to US?

    I tried to update the App that I purchased but the message told me that my Apple account is not valid for use outside of US and I must switch back to US store to able to do it. How can I switch the account from foreign countries back to US?

    On your phone (from http://support.apple.com/kb/ht1311):
    Change your iTunes Store country
    Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
    Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.

  • My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premier

    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!

    Hi Bryan,
    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!
    Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
    Hope that works for you.
    Kevin

  • HT204053 I cannot log into iCloud using my Apple username and password.  I keep getting an error message that states "CANNOT SIGN UP - The Apple ID is valid but is not an iCloud account."  How do I fix this?

    I cannot log into iCloud using my Apple username and password.  I keep getting an error message that states "CANNOT SIGN UP - The Apple ID is valid but is not an iCloud account."  How do I fix this?

    You are getting this message because you are attempting to create an iCloud account on a PC.  You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.2) or higher.  After creating your account on one of these devices you will then be able to sign into the account on your PC.

  • I forgot the password to my icloud but the email address registered for the icloud is no longer valid

    i forgot the password to my icloud but the email address registered for the icloud is no longer valid

    Apple ID: If you forget your password

  • The affect of failed validation on the page rendering phase

    This is divided in two parts. In the first one I describe the behavior and in the second I show work around and make a suggestion.
    The need that started this was that the value an item needed to be recalculated each time de page was shown. This page could be called from buttons and from branches on other pages. So the logical place to put this calculation is in Computation of the Page Rendering phase. But, when a validation failed the value wasn't shown on the browser and I later discovered it was not calculated at all. I tried moving the calculation in a Process of the Page Rendering phase, but to that didn't worked either. So I needed to have a beter understanding of happens when a validation fails, ence this test.
    The test was done on version 3.1.2 of APEX.
    For this test, here is what I programmed (if no values is specified, than the property has the default value):
    1. I created a blank page
    -- In the Page Rendering part --
    2. I created a region with the following properties
    Identification
    - Title: Alpha
    - Type: PL/SQL (Anonymous block)
    Source
    - Region Source: wwv_flow.debug('> RENDER REGION Alpha SOURCE');
    Conditional Display
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER REGION Alpha CONDITION'); RETURN TRUE;
    Caching
    - Caching: Cahed
    - Cache Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER REGION Alpha CACHE CONDITION'); RETURN TRUE;
    3. I created an item with the following properties
    Name
    - Name: P1_X
    - Display As: Textfield
    Displayed
    - Region: Alpha
    Source
    - Source Used: Always, replacing any existing value in session state
    - Source Type: PL/SQL Function body
    - Source value or expression: wwv_flow.debug('> RENDER ITEM P1_X SOURCE'); RETURN NULL;
    - Post Calculation Computation: :P1_X || ' POST-CALCUL'
    Default
    - Default value: wwv_flow.debug('> RENDER ITEM P1_X DEFAULT'); RETURN 'RENDER ITEM P1_X DEFAULT';
    - Default Value Type: PL/SQL Function body
    Conditions
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER ITEM P1_X CONDITION'); wwv_flow.debug('> P1_X="'||:P1_X||'"'); RETURN TRUE;
    Read Only
    - Read Only Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER ITEM P1_X READ_ONLY CONDITION'); RETURN FALSE;
    4. I created a second item with the following properties
    - Name: P1_Y
    - Display As: Textfield
    Displayed
    - Region: Alpha
    Source
    - Source Used: Only when current value in session state is null
    - Source Type: PL/SQL Function body
    - Source value or expression: wwv_flow.debug('> RENDER ITEM P1_Y SOURCE'); RETURN NULL;
    - Post Calculation Computation: :P1_Y || ' POST-CALCUL'
    Default
    - Default value: wwv_flow.debug('> RENDER ITEM P1_Y DEFAULT'); RETURN 'RENDER ITEM P1_Y DEFAULT';
    - Default Value Type: PL/SQL Function body
    Conditions
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER ITEM P1_Y CONDITION'); wwv_flow.debug('> P1_Y="'||:P1_Y||'"'); RETURN TRUE;
    Read Only
    - Read Only Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER ITEM P1_Y READ-ONLY CONDITION'); RETURN FALSE;
    5. I created a button with the following properties
    Name
    - Button Name: GO
    - Text Label/Alt: Go
    Displayed
    - Display in Region: Alpha
    - Button Position: Top of Region
    Conditions
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER BUTTON Go CONDITION'); RETURN TRUE;
    6. I created a second button with the following properties
    Name
    - Button Name: GOERRNULL
    - Text Label/Alt: Go invalid
    Displayed
    - Display in Region: Alpha
    - Button Position: Top of Region
    Conditions
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER BUTTON Go invalid CONDITION'); RETURN TRUE;
    7. I created a thrid button with the following properties
    Name
    - Button Name: RESET
    - Text Label/Alt: Reset cache
    Displayed
    - Display in Region: Alpha
    - Button Position: Top of Region
    Conditions
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER BUTTON Reset CONDITION'); RETURN TRUE;
    Optional URL Redirect
    - Target is a: Page in this Appplication
    - Page: 1
    - resetpagination for this page: checked
    - Request: RESET
    - Clear Cache: 1
    8. I created a computation with the following properties
    Item Name
    - Item Name: P1_Y
    - Type: PL/SQL Function body
    Computation Point
    - Computation Point:Before Header
    Source
    - Computation: wwv_flow.debug('> RENDER CALCUL P1_Y SOURCE'); RETURN 'RENDER CALCUL P1_Y SOURCE';
    Conditional Computations
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER CALCUL P1_Y CONDITION'); RETURN TRUE;
    9. I created a process
    Name
    - Name: Beta
    - Type: PL/SQL anonymous block
    Process Point
    - Process Point: On Load - Before Header
    - Run Process: Once Per Page Visit (Default)
    Source
    - Process: wwv_flow.debug('> RENDER PROC Beta SOURCE');
    Conditional Processing
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> RENDER PROC Beta CONDITION'); RETURN TRUE;
    -- In the Page Processing part --
    10. I created a computation
    Item Name
    - Item Name: P1_Y
    - Type: PL/SQL Function body
    Computation Point
    - Computation Point:After Submit
    Source
    - Computation: wwv_flow.debug('> PROC CALCUL P1_Y SOURCE'); RETURN 'PROC CALCUL P1_Y SOURCE';
    Conditional Computations
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> PROC CALCUL P1_Y CONDITION'); RETURN TRUE;
    11. I created a second computation
    Item Name
    - Item Name: P1_X
    - Type: PL/SQL Function body
    Computation Point
    - Computation Point:After Submit
    Source
    - Computation: wwv_flow.debug('> PROC CALCUL P1_X SOURCE'); RETURN NULL;
    Conditional Computations
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> PROC CALCUL P1_X CONDITION'); RETURN TRUE;
    12. I created a validation
    Validation
    - Name: Delta
    - Type: Function Returning Boolean
    - Validation Expression 1: wwv_flow.debug('> PROC VALIDATION Delta SOURCE'); RETURN FALSE;
    Error Message
    - Error Message: err msg
    - Associated Item: P1_X
    Conditionals
    - When Button Pressed: GOERRNULL (Go invalid)
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> PROC VALIDATION Delta CONDITION'); RETURN TRUE;
    13. I created a process
    Name
    - Name: Gamma
    - Type: PL/SQL anonymous block
    Process Point
    - Process Point: On Submit - Before Computation and Validations
    - Run Process: Once Per Page Visit (Default)
    Source
    - Process: wwv_flow.debug('> PROC PROC Gamma SOURCE');
    Conditional Processing
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> PROC PROC Gamma CONDITION'); RETURN TRUE;
    14. I created a second process
    Name
    - Name: Epsylon
    - Type: PL/SQL anonymous block
    Process Point
    - Process Point: On Submit - After Computation and Validations
    - Run Process: Once Per Page Visit (Default)
    Source
    - Process: wwv_flow.debug('> PROC PROC Epsylon SOURCE');
    Conditional Processing
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> PROC PROC Epsylon CONDITION'); RETURN TRUE;
    15. I created a branch
    Point
    - Branch Point: On Submit: After Processing (After Computation, Validation and Processiong)
    Action
    - Target Type: Page in this Application
    - Page: 1
    - include process success message: checked
    Conditions
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: wwv_flow.debug('> PROC BRANCH P1 CONDITION'); RETURN TRUE;
    As can be seen, I've programmed all condition to be true and therefore making all objects do thier calculations.
    Here is the debug output when we click on "Go". (a line number was added for easy refence)
    {color:#999999}001 0.05: A C C E P T: Request="GO"
    002 0.09: Metadata: Fetch application definition and shortcuts
    003 0.09: NLS: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=en-us
    004 0.09: alter session set nls_language="AMERICAN"
    005 0.09: alter session set nls_territory="AMERICA"
    006 0.09: NLS: CSV charset=WE8MSWIN1252
    007 0.09: ...NLS: Set Decimal separator="."
    008 0.09: ...NLS: Set NLS Group separator=","
    009 0.09: ...NLS: Set date format="DD-MON-RR"
    010 0.09: ...Setting session time_zone to -05:00
    011 0.09: ...Determine if user "FORD10" workspace "80447903191151509" can develop application "202" in workspace "80447903191151509"
    012 0.09: Session: OK to reuse builder session for user:APEX_PUBLIC_USER
    013 0.09: Fetch session state from database
    014 0.10: ...Check session 2800365259756461 owner
    015 0.10: ...Metadata: Fetch Page, Computation, Process, and Branch
    016 0.10: Session: Fetch session header information
    017 0.10: ...Metadata: Fetch page attributes for application 202, page 1
    018 0.10: ...Validate item page affinity.
    019 0.10: ...Validate hidden_protected items.
    020 0.10: ...Check authorization security schemes
    021 0.10: Session State: Save form items and p_arg_values
    022 0.10: ...Session State: Save Item "P1_X" newValue="RENDER ITEM P1_X DEFAULT POST-CALCUL" "escape_on_input="N"
    023 0.10: ...Session State: Saved Item "P1_Y" New Value="RENDER CALCUL P1_Y SOURCE POST_CALCUL"
    024 0.10: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
    025 0.11: {color}{color:#ff9900}> PROC PROC Gamma CONDITION{color}{color:#999999}
    026 0.11: ...Process "Gamma": PLSQL (ON_SUBMIT_BEFORE_COMPUTATION) wwv_flow.debug('> PROC PROC Gamma SOURCE');
    027 0.11: {color}{color:#ff9900}> PROC PROC Gamma SOURCE{color}{color:#999999}
    028 0.11: Branch point: BEFORE_COMPUTATION
    029 0.11: Computation point: AFTER_SUBMIT
    030 0.11: ...Evaluate condition "FUNCTION_BODY" for computation of item: P1_Y
    031 0.11: {color}{color:#ff9900}> PROC CALCUL P1_Y CONDITION{color}{color:#999999}
    032 0.11: ...Perform computation of item: P1_Y, type=FUNCTION_BODY
    033 0.11: ...Performing function body computation
    034 0.12: {color}{color:#ff9900}> PROC CALCUL P1_Y SOURCE{color}{color:#999999}
    035 0.12: ...Session State: Saved Item "P1_Y" New Value="PROC CALCUL P1_Y SOURCE"
    036 0.12: ...Evaluate condition "FUNCTION_BODY" for computation of item: P1_X
    037 0.12: {color}{color:#ff9900}> PROC CALCUL P1_X CONDITION{color}{color:#999999}
    038 0.12: ...Perform computation of item: P1_X, type=FUNCTION_BODY
    039 0.12: ...Performing function body computation
    040 0.12: {color}{color:#ff9900}> PROC CALCUL P1_X SOURCE{color}{color:#999999}
    041 0.12: ...Session State: Saved Item "P1_X" New Value=""
    042 0.12: Tabs: Perform Branching for Tab Requests
    043 0.12: Branch point: BEFORE_VALIDATION
    044 0.12: Perform validations:
    045 0.12: {color}{color:#ff9900}> PROC VALIDATION Delta CONDITION{color}{color:#999999}
    046 0.12: ...PL/SQL "function body returning boolean" Validation: wwv_flow.debug('> PROC VALIDATION Delta SOURCE'); RETURN :REQUEST 'GOERRNULL';
    047 0.12: {color}{color:#ff9900}> PROC VALIDATION Delta SOURCE{color}{color:#999999}
    048 0.13: Branch point: BEFORE_PROCESSING
    049 0.13: Processing point: AFTER_SUBMIT
    050 0.13: {color}{color:#ff9900}> PROC PROC Epsylon CONDITION{color}{color:#999999}
    051 0.13: ...Process "Epsylon": PLSQL (AFTER_SUBMIT) wwv_flow.debug('> PROC PROC Epsylon SOURCE');
    052 0.13: {color}{color:#ff9900}> PROC PROC Epsylon SOURCE{color}{color:#999999}
    053 0.13: Branch point: AFTER_PROCESSING
    054 0.13: ...Evaluating Branch: AFTER_PROCESSING type: "REDIRECT_URL" button: (No Button Pressed) branch: wwv_flow.debug('> PROC BRANCH P1 C5NDITION'); RETURN TRUE;
    055 0.14: {color}{color:#ff9900}> PROC BRANCH P1 CONDITION{color}{color:#999999}
    0.00:
    0.00: S H O W: application="202" page="1" workspace="" request="" session="2800365259756461"
    0.00: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
    056 0.00: alter session set nls_language="AMERICAN"
    057 0.00: alter session set nls_territory="AMERICA"
    058 0.00: NLS: CSV charset=WE8MSWIN1252
    059 0.00: ...NLS: Set Decimal separator="."
    060 0.00: ...NLS: Set NLS Group separator=","
    061 0.00: ...NLS: Set date format="DD-MON-RR"
    062 0.01: ...Setting session time_zone to -05:00
    063 0.01: NLS: Language=en-us
    064 0.01: Application 202, Authentication: CUSTOM2, Page Template: 2204612885682472
    065 0.01: ...Determine if user "FORD10" workspace "80447903191151509" can develop application "202" in workspace "80447903191151509"
    066 0.01: ...ok to reuse builder session for user:APEX_PUBLIC_USER
    067 0.01: ...Application session: 2800365259756461, user=APEX_PUBLIC_USER
    068 0.01: ...Determine if user "FORD10" workspace "80447903191151509" can develop application "202" in workspace "80447903191151509"
    069 0.01: Session: Fetch session header information
    070 0.01: ...Metadata: Fetch page attributes for application 202, page 1
    071 0.01: Fetch session state from database
    072 0.01: Branch point: BEFORE_HEADER
    073 0.01: Fetch application meta data
    074 0.02: Computation point: BEFORE_HEADER
    075 0.02: ...Evaluate condition "FUNCTION_BODY" for computation of item: P1_Y
    076 0.02: {color}{color:#ff9900}> RENDER CALCUL P1_Y CONDITION{color}{color:#999999}
    077 0.02: ...Perform computation of item: P1_Y, type=FUNCTION_BODY
    078 0.02: ...Performing function body computation
    079 0.02: {color}{color:#ff9900}> RENDER CALCUL P1_Y SOURCE{color}{color:#999999}
    080 0.02: ...Session State: Saved Item "P1_Y" New Value="RENDER CALCUL P1_Y SOURCE"
    081 0.02: Processing point: BEFORE_HEADER
    082 0.02: {color}{color:#ff9900}> RENDER PROC Beta CONDITION{color}{color:#999999}
    083 0.02: ...Process "Beta": PLSQL (BEFORE_HEADER) wwv_flow.debug('> RENDER PROC Beta SOURCE');
    084 0.02: {color}{color:#ff9900}> RENDER PROC Beta SOURCE{color}{color:#999999}
    085 0.02: Show page template header
    086 0.03: Computation point: AFTER_HEADER
    087 0.03: Processing point: AFTER_HEADER
    088 0.03: Computation point: BEFORE_BOX_BODY
    089 0.03: Processing point: BEFORE_BOX_BODY
    090 0.03: Region: Alpha
    091 0.03: {color}{color:#ff9900}> RENDER REGION Alpha CONDITION{color}{color:#999999}
    Alpha
    092 0.03: {color}{color:#ff9900}> RENDER BUTTON Go CONDITION{color}{color:#999999}
    093 0.03: {color}{color:#ff9900}> RENDER BUTTON Go invalid CONDITION{color}{color:#999999}
    094 0.03: {color}{color:#ff9900}> RENDER BUTTON Reset CONDITION{color}{color:#999999}
    Go Go invalid Reset cache
    095 0.03: {color}{color:#ff9900}> RENDER ITEM P1_X CONDITION{color}{color:#999999}
    096 0.03: > P1_X=""
    097 0.03: {color}{color:#ff9900}> RENDER ITEM P1_X READ_ONLY CONDITION{color}{color:#999999}
    098 0.03: Item: P1_X TEXT
    099 0.03: {color}{color:#ff9900}> RENDER ITEM P1_X SOURCE{color}{color:#999999}
    100 0.03: {color}{color:#ff9900}> RENDER ITEM P1_X DEFAULT{color}{color:#999999}
    X RENDER ITEM P1_X DEFAULT POST-CALCUL
    101 0.03: {color}{color:#ff9900}> RENDER ITEM P1_Y CONDITION{color}{color:#999999}
    102 0.03: > P1_Y="RENDER CALCUL P1_Y SOURCE"
    103 0.04: {color}{color:#ff9900}> RENDER ITEM P1_Y READ-ONLY CONDITION{color}{color:#999999}
    104 0.04: Item: P1_Y TEXT
    Y RENDER CALCUL P1_Y SOURCE POST_CALCUL
    105 0.04: {color}{color:#ff9900}> RENDER REGION Alpha SOURCE{color}{color:#999999}
    106 0.04: Computation point: AFTER_BOX_BODY
    107 0.04: Processing point: AFTER_BOX_BODY
    108 0.04: Computation point: BEFORE_FOOTER
    109 0.04: Processing point: BEFORE_FOOTER
    110 0.04: Show page tempate footer
    111 0.04: Computation point: AFTER_FOOTER
    112 0.04: Processing point: AFTER_FOOTER
    113 0.04: Log Activity:
    114 0.04: Execute Count=0
    115 0.04: End Show:{color}
    Here is the debug output when we click on "Go invlid". (a line number was added for easy refence)
    {color:#999999}201 0.14: A C C E P T: Request="GOERRNULL"
    202 0.19: Metadata: Fetch application definition and shortcuts
    203 0.19: NLS: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=en-us
    204 0.19: alter session set nls_language="AMERICAN"
    205 0.19: alter session set nls_territory="AMERICA"
    206 0.19: NLS: CSV charset=WE8MSWIN1252
    207 0.19: ...NLS: Set Decimal separator="."
    208 0.20: ...NLS: Set NLS Group separator=","
    209 0.20: ...NLS: Set date format="DD-MON-RR"
    210 0.20: ...Setting session time_zone to -05:00
    211 0.24: ...Determine if user "FORD10" workspace "80447903191151509" can develop application "202" in workspace "80447903191151509"
    212 0.24: Session: OK to reuse builder session for user:APEX_PUBLIC_USER
    213 0.24: Fetch session state from database
    214 0.29: ...Check session 2800365259756461 owner
    215 0.29: ...Metadata: Fetch Page, Computation, Process, and Branch
    216 0.29: Session: Fetch session header information
    217 0.29: ...Metadata: Fetch page attributes for application 202, page 1
    218 0.30: ...Validate item page affinity.
    219 0.30: ...Validate hidden_protected items.
    220 0.30: ...Check authorization security schemes
    221 0.30: Session State: Save form items and p_arg_values
    222 0.31: ...Session State: Saved Item "P1_X" New Value="RENDER ITEM P1_X DEFAULT POST-CALCUL"
    223 0.31: ...Session State: Saved Item "P1_Y" New Value="RENDER CALCUL P1_Y SOURCE POST_CALCUL"
    224 0.31: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
    225 0.32: {color}{color:#ff9900}> PROC PROC Gamma CONDITION{color}{color:#999999}
    226 0.32: ...Process "Gamma": PLSQL (ON_SUBMIT_BEFORE_COMPUTATION) wwv_flow.debug('> PROC PROC Gamma SOURCE');
    227 0.32: {color}{color:#ff9900}> PROC PROC Gamma SOURCE{color}{color:#999999}
    228 0.33: Branch point: BEFORE_COMPUTATION
    229 0.33: Computation point: AFTER_SUBMIT
    230 0.33: ...Evaluate condition "FUNCTION_BODY" for computation of item: P1_Y
    231 0.34: {color}{color:#ff9900}> PROC CALCUL P1_Y CONDITION{color}{color:#999999}
    232 0.34: ...Perform computation of item: P1_Y, type=FUNCTION_BODY
    233 0.34: ...Performing function body computation
    234 0.34: {color}{color:#ff9900}> PROC CALCUL P1_Y SOURCE{color}{color:#999999}
    235 0.34: ...Session State: Saved Item "P1_Y" New Value="PROC CALCUL P1_Y SOURCE"
    236 0.34: ...Evaluate condition "FUNCTION_BODY" for computation of item: P1_X
    237 0.34: {color}{color:#ff9900}> PROC CALCUL P1_X CONDITION{color}{color:#999999}
    238 0.34: ...Perform computation of item: P1_X, type=FUNCTION_BODY
    239 0.34: ...Performing function body computation
    240 0.35: {color}{color:#ff9900}> PROC CALCUL P1_X SOURCE{color}{color:#999999}
    241 0.35: ...Session State: Saved Item "P1_X" New Value=""
    242 0.35: Tabs: Perform Branching for Tab Requests
    243 0.35: Branch point: BEFORE_VALIDATION
    244 0.35: Perform validations:
    245 0.75: {color:#ff9900}> PROC VALIDATION Delta CONDITION{color}{color:#999999}
    246 0.76: ...PL/SQL "function body returning boolean" Validation: wwv_flow.debug('> PROC VALIDATION Delta SOURCE'); RETURN FALSE;
    247 0.78: {color}{color:#ff9900}> PROC VALIDATION Delta SOURCE{color}{color:#999999}
    248 0.78: ...{color}{color:#ff0000}Validation did NOT pass{color}{color:#999999}
    249 0.78: ...{color}{color:#ff0000}Inline validation error count = 1{color}{color:#999999}
    250 0.86: Show current page with inline validations
    251 0.87:
    252 0.87: S H O W: application="202" page="1" workspace="" request="" session="2800365259756461"
    253 0.87: NLS: Language=en-us
    254 0.87: Application 202, Authentication: CUSTOM2, Page Template: 2204612885682472
    255 0.88: ...Determine if user "FORD10" workspace "80447903191151509" can develop application "202" in workspace "80447903191151509"
    256 0.88: ...ok to reuse builder session for user:APEX_PUBLIC_USER
    257 0.88: ...Application session: 2800365259756461, user=APEX_PUBLIC_USER
    258 0.88: ...Determine if user "FORD10" workspace "80447903191151509" can develop application "202" in workspace "80447903191151509"
    259 0.88: ...Metadata: Fetch page attributes for application 202, page 1
    260 0.88: Branch point: BEFORE_HEADER
    261 0.88: Fetch application meta data
    262 0.88: Computation point: BEFORE_HEADER
    263 0.88: ...Evaluate condition "FUNCTION_BODY" for computation of item: P1_Y
    264 0.92: {color}{color:#99cc00}> RENDER CALCUL P1_Y CONDITION{color}{color:#999999}
    265 0.92: Processing point: BEFORE_HEADER
    266 0.92: ......Do not perform process because inline validation condition found.
    267 0.92: ...Do not run process "Beta", process point=BEFORE_HEADER, condition type=FUNCTION_BODY, when button pressed=
    268 0.92: ...Recompute field lables for fields in error.
    269 0.97: Show page template header
    270 1.20: Computation point: AFTER_HEADER
    271 1.20: Processing point: AFTER_HEADER
    1 error has occurred
    * Error msg
    272 1.20: Computation point: BEFORE_BOX_BODY
    273 1.20: Processing point: BEFORE_BOX_BODY
    274 1.21: Region: Alpha
    275 1.23: {color}{color:#ff9900}> RENDER REGION Alpha CONDITION{color}{color:#999999}
    Alpha      
    276 1.25: {color}{color:#ff9900}> RENDER BUTTON Go CONDITION{color}{color:#999999}
    277 1.25: {color}{color:#ff9900}> RENDER BUTTON Go invalid CONDITION{color}{color:#999999}
    278 1.28: {color}{color:#ff9900}> RENDER BUTTON Reset CONDITION{color}{color:#999999}
    Go Go invalid Reset cache
    279 1.30: {color}{color:#ff9900}> RENDER ITEM P1_X CONDITION{color}{color:#999999}
    280 1.30: > P1_X=""
    281 1.30: {color}{color:#ff9900}> RENDER ITEM P1_X READ_ONLY CONDITION{color}{color:#999999}
    282 1.30: Item: P1_X TEXT
    X POST-CALCUL
    Error msg
    283 1.30: {color}{color:#ff9900}> RENDER ITEM P1_Y CONDITION{color}{color:#999999}
    284 1.30: > P1_Y="PROC CALCUL P1_Y SOURCE"
    285 1.31: {color}{color:#ff9900}> RENDER ITEM P1_Y READ-ONLY CONDITION{color}{color:#999999}
    286 1.31: Item: P1_Y TEXT
    Y PROC CALCUL P1_Y SOURCE POST_CALCUL
    287 1.32: {color}{color:#ff9900}> RENDER REGION Alpha SOURCE{color}{color:#999999}
    288 1.32: Computation point: AFTER_BOX_BODY
    289 1.32: Processing point: AFTER_BOX_BODY
    290 1.32: Computation point: BEFORE_FOOTER
    291 1.32: Processing point: BEFORE_FOOTER
    292 1.32: Show page tempate footer
    293 1.32: Computation point: AFTER_FOOTER
    294 1.32: Processing point: AFTER_FOOTER
    295 1.32: Log Activity:
    296 1.32: Execute Count=0
    297 1.32: End Show:{color}
    Looking at those debug output, I was able to find a workaround. Look at the line 264 and compare that to the lines 076 to 080. What I did is put the computation in the condition. This way, I'm garanteed that the calculation is always done. Here is an exemple:
    A Computation (in the Page Rendering part)
    Item Name
    - Item Name: P1_Y
    - Type: PL/SQL Function body
    Computation Point
    - Computation Point:After Submit
    Source
    - Computation: RETURN :P1_Y; -- Never executed. Look in the condition for computation
    Conditional Computations
    - Condition Type: PL/SQL Function Body Returning a Boolean
    - Expression 1: :P1_Y := COMPUTE(); RETURN FALSE;
    This works but totally break the semantics created in APEX.
    Suggestion:
    In the Page rendering phase, when a validation fails, the source compution found in a Item (in that case the value is taken from the session state), in a Computation or in Process is never executed.
    This should revised.
    Their should be a way for the programmer to choose what behavior the rendering phase will have when a validation fails other than using a workaround that might break in futur versions of APEX.
    Edited by: user4591233 on Nov 19, 2008 6:32 AM
    Edited by: user4591233 on Nov 19, 2008 6:34 AM

    Dominique,
    Thank you for the detailed problem description. Although you posted it some ten hours ago I have just now finished reading it.
    Form pages must be built so they can operate correctly when inline validation errors are displayed. The assumption (by the engine) is that session state (and package state) as it exists at the point the validations are performed is sufficient (and correct) to support the redisplay of the page without the need to fire on-load processes or computations. Session state or package state changes made by after-submit computations or after-submit/before computations/validations processes that prevent correct page behavior on the "validation redisplay" must be avoided.
    The condition types Inline Validation Errors Displayed/No Inline Validation Errors Displayed can be used for on-load events/controls (processes, computations, regions, items, ...) for which you need finer control over this behavior.
    Also, you can forgo the use of after-submit computations when the resulting alteration of session state would be inimical to proper "validation redisplay" behavior and use On Submit - After Computations and Validations processes instead.
    I hope I have understood your situation and that this answer adequately answers your questions.
    Scott

  • HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

    Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network.  No problem printing from my devices, but the following day, it is looking for AirPrint printer, why? 

    Hello lenc48,
    Welcome to the HP Forums.
    I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
    I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
    Please click on the first link that will give you instructions on Uninstalling the Printer Software.
    Once the software has been removed, please disable any anti virus protection that you may have on the Mac. 
    The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
    The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
    If you are still having issues, feel free to write me back or you can contact HP Total care direct.  If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • WCF returning "The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8)"

    I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
    Does anyone have any suggestions on how to solve this probelm?
    Here is the error:
    The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
    <title>500 - Internal server error.</title>
    <style type="text/css">

    I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
    Hi,
    I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
    {"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
    1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
    PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
    5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
    0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
    Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
    I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
    I do have windows Activation Features installed and I am using .Net Framework 4.
    Thanks
    Sofia Khatoon

  • I can't play videos (youtube for example) unless it is in full screen mode. The audio works in either, but the video only shows in full screen. Any help would be greatly appreciated.

    I can't play videos (you tube for example) except in full screen mode. The audio works in either, but the video doesn't load or run in the normal you tube web site.
    Any help would be greatly appreciated.
    Thanks
    Also, the error console shows all sorts of different errors. Though, alot of error parsing values.

    Do you have any Mail plug-ins? In particular, do you
    have any plug-ins installed on one computer but not
    the other? In the Finder, go to each of the following
    folders (if they exist). What do you see there?
    /Library/InputManagers/
    Not Found
    /Library/Mail/Bundles/
    Not Found
    ~/Library/InputManagers/
    Smart Crash Reports Folder / Smart CrashReports.bundle
    ~/Library/Mail/Bundles/
    MailRecent.mailbundle
    > I have a number of Mail Rules in
    place which place messages
    of certain topics in specific Smart
    Mailboxes
    This doesn’t make sense to me. You cannot tell a rule
    to move messages to a smart mailbox, only to a normal
    mailbox. Each smart mailbox has its own set of
    conditions that messages must satisfy in order for
    them to appear there.
    OK. I misstated this. I have a number of Smart Mailboxes with their specific rules in which to route certain topics to specify mailboxes. I am trying to not have to create each Smart Mailbox on each computer.
    The problem is that when I am on the road I add contacts, bookmarks, keychain items, contacts into my laptop and vice versa when home. I would just like to have those Sync on both computers. Seems like it should be easy, but it hasn't been.
    I really don't think I have anything "non-standard." A few Smart Mailboxes, a couple of signatures, thats pretty much it.
    Note: For those not
    familiarized with the ~/ notation, it refers
    to the user’s home folder. You can easily locate any
    of the folders referred to in this post by copying
    the folder path here, doing Go > Go to Folder
    in the Finder, and pasting the folder path
    there.

  • HT1386 how do i delete music from my ipad? I have deleted the music from my itunes but when I sync it does not delete off my ipad

    How do I delete music from my ipad? I have deleted the music from my itunes but when I sync it wont come off my ipad.

    If you don't want to delete too much then you can do it directly on the iPad. You can either swipe across track names and you should get a delete button, or on the album or artist selection screens you can press and hold an album or artist and you should then get an 'x' on its top corner which will delete the album or artist if you tap it.
    If you want to delete more then it may be quicker to connect the iPad to your computer, and on the left-hand side of your computer's iTunes under the iPad device you should see a Music section (if you don't see the content types listed then click the arrow next to the iPad's name) - select that and on the right-hand side you should see a list of the music that is on your iPad, and you can then select and delete them.

  • I'm trying to use the slide to unlock bar but the iPad 3 touch screen is non responsive.

    iPad 3 touch screen non responsive. How can I fix this?
    I'm trying to use the slide to unlock bar but the iPad 3 touch screen is non responsive. How can I fix this!

    I tried that step but it would not work. I think I may have changed a setting.
    I was able to highlight a function but had to tap 3 times to get it to respond
    to the command. I think it's some type of Restriction or Accessibility settings.
    Any suggestions?

  • TS3376 the application is working good, but the location of my device has found was totally wrong. any idea?

    the application is working good, but the location of my device has found was totally wrong. any idea?

    That would be the issue here.
    The gateway is a modem/router that is in charge of your network.
    The AirPort sensed this during setup and configured itself to operate correctly and passively with an "upstream" router on the network.....so, the Airport is in Bridge Mode.
    The upside is that the AirPort is configured correctly to work with your gateway. The downside.....and Catch 22....is that the Guest Network will not operate correctly when the AirPort is in Bridge Mode. 
    The AirPort has to be the router "in charge" in order for the Guest Network feature to work correctly.
    If you want to try to break some basic networking rules, and have two devices both trying to perform routing chores on the network, that might be a workaround.  But, things get complicated to set this up.....and it will produce what is known as a Double NAT error on the network......which may allows things to work OK....or....cause problems.
    Double NAT errors are unpredictable. It will be one of those things where you will not know if things will work until you try. No guarantees possible.
    The network will have to be completely redone if you want to try this, and you will have to set up new Static IP addresses for devices that need them.
    In general, if you want to try this, the network layout must look like this:
    Internet Connection > SMC Gateway > AirPort Express > Ethernet Switch > Devices.
    With things set up the way that they are now......the simpler thing to do would be to use the SMC wireless for your "main" network and the AirPort Express wireless for "guests". 
    The downside....."guests" will be able to "see" devices on your "main" network with this type of setup.

Maybe you are looking for

  • Can't log in to my account after system crash

    I'm looking for help with a bizarre problem that just started on my mac. I was using the computer (just using Safari, Mail, etc., nothing fancy) and got the message that my disk was full and I should quit some programs to free up space. I check my st

  • Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6

    Hello Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6. I have a problem since my installation of the Yosemite update on my Mac I can more open Indesign yet I have installed JavaForOSX2014-0

  • Upload GL accont master data from legasy to SAP R/3

    Hello Gurus,                     I have a requirement to write a BDC program for uploading GL account master data from legacy system to SAP R/3 database using FS00 transaction.Please can you help me with this? Regards, Kalpana.

  • Putting a text in Tool area?

    Dear all Can i put scrolling text in the tool area? If yes... Pl suggest me Regards PRadeep

  • LR 1.1 unwanted color or tint shift

    I'm using Lightroom 1.1 (haven't downloaded 1.3.1 update yet) on a Windows XP (SP2) system, and all of a sudden the color/tint of many of the photos in my library have taken on a yellowish or greenish tint. This seems to have occurred after a recent