The Internet Transaction Server failed to generate the response for current

Hi all,
With reference to the thread Re: Interpreter failed error message while raising Shopping Cart. posted by Askhay kumar, we are facing the same issue but not yet resolved.
Checked points:
1) We republished all the templates
2) TCP/IP RFCs are all working fine
But the ABAP dumps says:
UNCAUGHT_EXCEPTION
Error analysis                                                             
An exception occurred. This exception is dealt with in more detail below   
. The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not 
caught,                                                                   
which led to a runtime error.                                              
The reason for this exception is:                                          
Incorrect status in pricing                                                
The termination occurred in the ABAP program "SAPLBBP_PDH" in "BBP_PD_ABORT".   
The main program was "SAPLBBP_SC ".                                                                               
The termination occurred in line 67 of the source code of the (Include)         
program "LBBP_PDHU08"                                                          
of the source code of program "LBBP_PDHU08" (when calling the editor 670).      
Can anybody provide some suggestions ASAP please?
Thanks
Mani

Please check this
CX_BBP_PD_ABORT error selection itens in SC

Similar Messages

  • ITS (Internet Transaction Server)

    Good day.
    If you have knowledge or materials about ITS (Internet Transaction Server), we need your help.
    Your assistance will be very much appreciated.
    Thanks.

    hi,
    Understanding SAP ITS - Internet Transaction Server
    The SAP Internet Transaction Server (ITS) is the essential link between the SAP R/3 system and the Internet. It enables Internet (and Intranet) users to communicate directly between R/3 system to run R/e transactions, remote enabled function modules and reports as Internet applications components. The ITS is one of the cornerstones of SAP's mySAP.com offerings and strategy and integrated into the SAP 6.10 Web Application Server release. The ITS is the key technology behind the following products: Workplace, Employee Self-Service (ESS), Enterprise Buyer Professional (EBP), BW 2.0 Interface, Online Store and Retail Store, and the APO Interface. There are many other SAP products and applications that are based on ITS technology to interface from the Web to SAP R/3.
    SAP ITS can handle complementary Web technologies to access data from SAP R/3:
        - SAP GUI for Html: SAP transaction screens are dynamically converted to HTML pages
        - Web transactions: SAP transactions that can be called from an HTML page (template based mode)
        - Web remote function call (RFC): SAP R/3 function module that can be called from an HTML page
        - Web reporting: Mechanism for linking to SAP reports and regenerated lists from an HTML page. Web reporting is implemented as a special-case RFC.
        - ITS Flow Logic: Events, statuses, and modes used to model the dialog logic of a Web application in "flow files" on the SAP ITS.
    SAP R/3 data is accessed via BAPI or RFC. Access to external data providers is also possible.
    SAP's Internet applications are known as Internet Application Components (IAC) or Easy Web Transactions (EWT). Both are complete business solutions that allow Internet and Intranet users to access business information in the SAP R/3 system by starting transactions, function modules, and reports from a Web browser. All IACs or EWTs are based on a common infrastructure consisting of two essential components.
    SAP Internet Transaction Server (ITS) - The ITS is the interface between the Internet and R/3 and is the runtime engine that links Web server to the R/3 Application server.
    ABAP workbench tool - Web Application Builder and/or SAP@Web Studio - WAB is an R/3 ABAP workbench tool and SAP@Web Studio is a PC tool for creating, modifying and managing all ITS objects on which IACs or EWTs are based. These objects include service files, HTML Templates and HTRC language resource files.
    The ITS solution to developing Internet applications is based on the premise that there is already a suitable business application solution, which has a stock of transactions, function modules and reports, as well as its own integrated development environment. All that is needed to enable Internet users to access and run these applications is an interface to the Internet. Apart from the general advantages derived from making SAP R/3 business information available over the internet, the ITS solution has many benefits.
    These include:
    Ease of development - Programmers can develop IACsEWTs using a business application system (R/3), development environment (ABAP Workbench) and a programming language (ABAP), with which they are already familiar. There is also integrated data dictionary support from the ABAP Dictionary and appropriate transaction handling.
    Ease of deployment - The ITS solution supports internationalization of applications.
    Ease of use - ITS based IACs and EWTs have the same look and feel as any other Web site.
    The separation of programming tasks from the visual design aspects is desirable, because both require different skills. In the ITS scenario, the ABAP programmer develops the application in ABAP using the ABAP Workbench in the SAP R/3 system and the user interface specialist handles the design and navigation aspects of the application with design languages like HTML and SAP's HTML Business in either the SAP@Web studio or ABAP Workbench tool, Web Application Builder.
    The aim is to create applications that send documents back to the Web browser client in plain HTML format, since this format can be handled by all major browsers. This is important in an environment like the Internet where there is often little control you can exert over client software such as Web browsers. Fit can be controlled; you can also use Dynamic HTML, Java applets, JavaScript, and VBScript in you HTML templates, because the script language is transparent to the ITS.
    Thanks,
    Shankar

  • Explanation RADIUS server failed to respond to request for STA

    Hi all,
    i have configured WLC 5508 to access through FreeRadius. Login is working fine but i see a lot of Warning message like :
    WLC_5508_SECONDARY: *radiusTransportThread:  #AAA-4-RADIUS_RESPONSE_FAILED: radius_db.c:472 RADIUS server X.X.X.X:X failed to respond to request(ID 28) for STA 40:83:de:3e:ee:81 / user '4083de3eee81'
    In Cisco System Message i've found :
    Explanation    RADIUS server failed to respond to request for STA.
    Recommended Action    No action is required.
    Is there a solution?
    Thanks
    Marco

    I think you've not configured the WLC as a RADIUS client on the RADIUS server, or the RADIUS shared secret is incorrect.
     http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080782507.shtml

  • How can I get the responsibility for concurrent programs

    Guys,
    How can I get the responsibility for a list of concurrent programs. Is there a query that I can run to get the results?
    Thanks in advance,

    Refer to Note: 134036.1 - WHOCANRUN.SQL - List Responsibilities That Can Run a Given Concurrent Program
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134036.1
    From the output of the query in the note referenced above, you can run "Users of a Responsibility" concurrent program then to find out the list of users who have access to a certain responsibility.

  • Internet not working - wifi connected but internet and server fail, ethernet cable doesn't work either

    All of a sudden the internet on our Macbook Pro does not work.  We connect through an Airport Extreme and other mac works fine.  It shows that wifi is fully connected but when i go to diagnostics, i see the internet and server are failing.  I tried connecting an ethernet cable and it doesn't work that way either.  Have restarted and reset modem and router, nothing is working… help!

    Hi ehamzic1,
    Welcome to the Apple Support Communities!
    I understand how frustrating it can be when your computer cannot connect to the internet. In your situation, you will need to isolate to find what is causing the issues connecting. I would recommend reading over and working through the attached article. The article should help you troubleshoot and resolve this situation.
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    http://support.apple.com/kb/HT1714
    Have a great day,
    Joe

  • Where is the responsibility for faults and failure...

    My phone line was found to have intermittent noise and crackling also the speed on my broadband became very variable and It was noticed that my line profile had changed downwards. On calling bt on the landline crackles and noise were heard on the line.
    The fault was reported as a voice fault on 23rd October and an appointment made for an engineer to call on 30th October.
    On 30th October no engineer arrived, on calling BT (India) I spoke with at least three individuals before being told that the case had been closed. At no point was I advised that the case was closed or indeed even investigated. I had taken time off work to be at home for the visit.
     I was told that the reason for the case being closed would be investigated and that someone would call me back.  I asked for a response in writing or email but was advised that this was not possible.
    A new appointment was made for Tuesday 6th November this time in the afternoon 12-18:00, at approximately 17:05 a call was received from Openreach to advise that no engineer would be coming that day as he had run out of time. I asked if he would be tomorrow, to be told that that was not possible and that I could make another appointment for Friday 9th at the earliest. I was also advised that if I wanted to escalate this or find out more I would have to do so through BT.
    I called BT, India again which resulted in me speaking with four individuals purporting to be a mix of advisors, supervisors and managers. The final one promised to call me back today 7th November between 12 and 1300, no call was received.
    So far I have taken two days off work for BT to call, been threatened that if the problem is in my own house I will have to pay a charge and still no resolution.
    The advisors, managers, supervisors have all been very “sorry”, have all “apologised” but have singularly been unable to find out quickly and accurately what is going on. They have also not called back when they have indicated they will. They (BT) are not taking any responsibility for faults or the failure to fix them.
    BT blame Openreach, the customer, the isp
    Openreach blame BT and the stock phase they told me Im only the messenger was actually used!
    Who is working for the customer, who is able to get the faults fixed and why should they change if the only penalty is £10.00 per failed visit.

    Keith, thank you for that and I will.
    The call centre is one of the issues, I have always found them to be polite but as much good as a chocolate fireguard. Not because of nationality or education or indeed anything like that, its the restrictions and systems they seem to be working with.
    The stock responses, the same questions time and time again, the multiple levels of "managers" who can do nothing?
    The people in India are only as good as the systems they have in place. Those systems and trainers are provided by I presume BT.
    Does it really take two rounds of calls to
    (1) Advisor
    (2) Supervisor
    (3) Team leader
    (4) Manager
    Then a forum posting, then an email to customer care..what next a carving on a wooden stick floated down the Thames?
    Even if BT care come with some answers, should I be gratefull for them? Or still angry that its taken so long and so hard to get them.
    Why are BT not ashamed of their customer "service", a sales call is answered very quickly, if I dont pay my bill on time its also acted on very quickly.
    BT apparently are spending billions on new fibre optic (I doubt it will go rural)
    http://www.bbc.co.uk/news/technology-16870464
    For a fraction of this Im sure they could improve their customer service and engineering!
    Craig

  • Is there any Function Module  to delete the  Responsibility for buyer

    Hi,
            I am able to insert a responsibility for a buyer using the FM, BBP_UPDATE_ATTRIBUTES. Can any one can tell me is there any FM to delete the responsibity for buyer. The BBP_UPDATE_ATTRIBUTES is not working for deletion and It is taking lot of time when i am trying to delete rsponsibility by using  the transactio code PPOSA_BBP .
    I found one badi, HRBAS00INFTY but there are no exporting or changing parameters in that badi to write some logic to delete.
    The  FM ,RH_BASE_UPDATE_DB_DIALOG is getting executed and updating the data base tables after the above badi got executed. can i use this FM ,RH_BASE_UPDATE_DB_DIALOG directly to delete the responsibility?I think it is not recomended.
    can any one give me some idea.

    Hi. You can use transaction PP01 instead of PPOMA_BBP.
    You might have to make some settings in table T777I to allow the responsibility to be maintained from PP01, but it it a lot faster than PPOMA_BBP, and you could use an ECATT or call transaction on PP01.
    You can also delete all the infotype using PP01, basically delete all the responsibility in 1 go if that is any use? Try all this in a test system first toget used to it though.
    Regards,
    Dave.

  • How to generate cXML response for a Trading Partner in Oracle B2B 11g

    We have a requirement to generate a cXML response whenever there is an inbound message posted from a trading partner to our B2B servlet. Can the response be directly generated in B2B integration layer and sent back to the partner?
    Messages(cXML) will be exchanged as Custom document using HTTPs protocol.

    Thanks for the response.
    Can you please explain how you used custom cXML in the Ack. What document protocol was used.
    Thanks!

  • XRPCC Server Fails to Generate

    Hi,
    I have new java web service developer pack and tried to run the "Hello" program.I am getting exception
    compile-server:
    [echo] Compiling the server-side source code....
    [javac] Compiling 2 source files to D:\jwsdp-1_0\docs\tutorial\examples\jaxr
    pc\hello\build\shared
    set-xrpcc:
    xrpcc-server:
    [echo] Running xrpcc for the server....
    BUILD FAILED
    D:\jwsdp-1_0\docs\tutorial\examples\jaxrpc\hello\build.xml:46: Execute failed: j
    ava.io.IOException: CreateProcess: d:jwsdp-1_0\bin\xrpcc.bat -classpath build/sh
    ared -server -d build/server config.xml error=3
    Total time: 3 seconds
    D:\jwsdp-1_0\docs\tutorial\examples\jaxrpc\hello>
    Details:
    OS : Windows 2000 Server
    Can anyone of you guys solve this problem asap..
    /Bala

    Hi
    Let me know whether the Java Web Service developer Pack does not support on Win 2000 Server.
    Any one of you throw some tips on solving this problem
    /Bala

  • Internet Transaction Server (ITS) SAP Support

    Hi,
    I need an info regrading whether ITS is still supporting by SAP?
    If NOT please give some info related that.
    Thanks
    a®

    Now the latest version of ITS is integrated with WAS. In portal perspective, SAP is recommending all the Customers to use webdynpro. I think, SAP will not release enhanced version of ITS in the future..
    One of my friend is working in ESS/MSS upgrade project, they are moving Internet services from standalone ITS 6.2 to Integrated ITS 7.0 . They are facing lots of problem in the Integrated ITS, because many of the custom developments are not working..same like standalone ITS.SAP released many patches to fix this issues.
    In the future, SAP wont support any new implementation based on ITS.
    Regards,
    Maha

  • Meaning fails to generate correct code for text item in designer reports

    I have a text item in a report which is a table column governed by a domain. When the display type is set to TEXT and the Show Meaning property is set to MEANING ONLY - the code generation fails as follows:
    WHERE NTC.ICO_ID = L_ICO.ID AND
    L_ICO.ISS_CAT_CODE = L_ISS.CAT_CODE AND
    L_ICO.ISS_LEGI_CODE = L_ISS.LEGI_CODE AND
    NTC.DEM_ID = L_DEM.ID
    CG.RV_DOMAIN = 'NOTICE TYPE' AND CG.RV_LOW_VALUE = NTC.NOTICE_TYPE
    The failure is caused because the AND is omitted from the last condition in the query. (the part that gets the meaning from cg_ref_codes).
    Can anyone advise on a solution to this?

    Sander,
    Your concerns about renaming the new release 4 libraries to ofg*65.pll are understandable, but it is exactly what you have to do. The only customizations we made to the ofg* libraries in Headstart 6i are workarounds for Designer bugs that were present when we wrote Headstart 6i (at that time we used Designer release 2). These bugs have been fixed by now, so it is safe to use the Release 4 versions and get rid of the ones that shipped with Headstart 6i.
    We recommend still renaming them to ofg*65.pll, for an explanation see the Headstart User guide or the Headstart Installation Guide.
    Kind regards,
    Peter
    null

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Planned depreciation not showing in the AW01n for current FY

    Hi Experts,
    I have an issue on Planned Depreciation and the issue as below.
    I have created an Asset with Dep.start date is 10.05.2011 and my Fiscal year is Jan- Dec with 445 posting periods. I have posted Acquisition with the value of 10,000 through F-90. When i check the Asset Explorer through AW01n its not showing Planned deprecation in the Posted Values tab and in Comparisons tab its showing the Dep. from 2012 onwards till useful life and here in 2012 its showing the dep.value from May to Dec only, and also its not showing Dep.value for 2011 year ( showing blank).
    If i post the acquistion in 2010, its showing the depreciation from 2011 onwards and also for 2010 year its not showing any planned deprecation.
    In Dep. calculation it means  % of dep. and every thing is ok. ( its showing the values as per the % stated in dep.key)
    I have posted the same scenario to another company code and its showing planned deprecation for 2011 year.
    May i know the missed config settings to view planned depreciation.
    kindly provide your valuable solution
    thanks,
    jagadish.P

    Hi,
    When i click the Dep. calculation its showing as below
    Type     To Period         Period Factor     Percentage     Curr.APC
    N                 164             0.45055                     0                 0
    N                 364             0.54945                 0.125               45,000
    thanks & regards,
    Gopi.P

  • Why is the artwork for current song,suddenly appearing on my desktop?

    have I checked a setting I don't know about? Thanks, Craig

    Check the drive’s connections, including the cable used to plug it into the computer. If it’s connected properly, it’s probably dead.
    (117178)

  • Windows Server 2008 R2 dynamic assigned ports for currently logged in users

    Hi,
    How can I find out currently allocated dynamic ports for a user in windows server 2008? 
    From registry, I can see the dynamic port range for an application (1025~49151) and system dynamic port range is 49152~65534.
    However, I am looking for the dynamic port range for users currently logged into the server.
    Please assist.
    Thanks,
    Suranjit 

    If you want to list all ports the server is currently listening on as well as the processes using them, netstat can help you with that.
    netstat -aon | find /i "listening"
    Where the -o will give you the Process ID, which can be matched up with the username.

Maybe you are looking for