The invoice date and the paymant date showing the same

hi sap techies
i am facing a typical problem the invoice date and the payment date is showing the same in fbl5n.the payment terms are set for 30 days that means that the payment date should be 30 days from the invoice date but in fb03 the system shows invoice date and the payment due date to be the same.
please help
kind regards

Hi,
Payment terms are calculacted either on
- Document Date
- Posting Date or
- Entry Date
You must have chosen document date in the parameters for payment term and now you must be comparing on posting date.
Check what is the parameter in payment terms.
Also check the payment terms in the document.
Good Luck!
SAP Solutioning

Similar Messages

HT201412 Hello I made a update on my ipod to the ios 6 and its just been showing the apple logo then goig off and repeating that any ideas or help please?

I made a update to the ios 6 and now its just showing the apple logo and going off to black and repeating tat any help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I go to my webpage it comes up blank I right click to get the page info and it is not showing the media and load images is checked

I have an online business and when I go to my websites they come up blank. I went to the same site on my other pc and it loads just fine. When I checked the page info and compared the two the one that loads ok shows general, media, permissions and security and the other shows everything but media. How can I get this back? I've checked everything I can think of. Load images is checked

According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy.

I have an imac and I set up additional user accounts. When I start up or restart the computer it only shows me the option of logging on as the system administrator and it does not show the other accounts for my wife and kids.

When I start up my additional user accounts do not show so I can log onto them. The same thing happens when I log out as the system admin. How do I get to the additional accounts that I have set up on my imac so I can log in under them. Thanks

There is zero advantage to partitioning a HD for the purpose you have described. I recommend that you take your machine to an AASP, describe the problem and they will help you get it back working. Partitioning a HD is a 1990's approach and is of no value what-so-ever unless you installing multiple operating systems on the HD. In that case it would be valuable.
Good luck.

How do I store 4 hours of data and get it out of the "while loop" into a spreadsheet file for documenting purposes? "See additional Text for additonal info"

What a have is a VI that uses the following SUbvi's, starts with FP OpenVI, then FP Create TagVI, into a "While Loop" which contains a FP ReadVI outputting data into a Index ArrayVI outputting to a Display (DBL). This shows the output of a FP-AI-100 monitoring a 9v battery. I have to monitor this battery for a 4 hour period my problem is storing the 4 hours of data and getting it out of the "while loop" into a "Write to Spreadsheet File VI" all I seem to accomplish is just one data sample which I get into a spreed ship file with no problem. I just can't get 4 hours worth. By the way this is my first VI and I'm self
trained so have mercy.

I figured it out thanks.
John Morris
Glendinning Marine

How do I store 4 hours of data and get them out of the "while loop" into a spreadsheet file for documenting purposes? "See additional Text for additonal info"

What a have is a VI that uses the following SUbvi's, starts with FP OPENvi, then FP Create Tagvi, into a "While Loop" which contains a FP READvi outputting data into a INDEX ARRAYvi outputting to a Display (DBL). This shows the output of a FP-AI-100 monitoring a 9v battery. I have to monitor this battery for a 4 hour period my problem is storing the 4 hours of data and getting it out of the "while loop" into a "Write to Spreadsheet File vi" all I seem to accomplish is just one data sample which I get into a spreed ship file with no problem. I just can't get 4 hours worth. By the way this is my first VI and I'm sel
f trained so have mercy.

I figured it out Thanks.
John Morris
Glendinning Marine

In the Alarm & Event Query VI how to show the alarm data

In the Alarm & Event Query VI how to show the alarm data in the front pannel using the table or multicolumn listbox .thank you very much！！！

Hi,
Most likely there is something wrong with your specific database or your LabVIEW DSC installation. I just used the Alarm & Event Query.vi in my machine and it seems to work fine, I can see all the alarms as well as events containned in the database.
You may considerer generate another database (change the logging directory) and see if the behavior goes away. Also, make sure you have alarms and events on that database.
I could run the Alarm & Query.vi by just openning its front panel and placing the correct database in the appropriated control.

How can I get my safari 5.1.10 to download the java update so I won't continue to get notices that my browser is out of date and I need to download the update, which then won't download. Cannot view anything in youtube or most other places.

Jeez. Trying to view items in youtube. I keep getting a blacked out picture telling me my browser is out of date and I need to download the update. I do that and then it doesn't connect so I'm back at square one.

Hi MiMattheMac, you probably won't have any problems but just be aware upgrading from Snow Leopard to anything later is a big leap. Old, PowerPC - only programs won't work, for example, and even more recently developed programs won't work if their developers have not been updating them for recent OS X versions.
If you haven't made a backup of your Mac yet, and you consider the information on it important, please consider doing that. It is the only practicable way to "undo" an OS X upgrade should you want to. Merely having a backup seems to preclude the need to ever use it.
If the information on your Mac is not important to you, upgrading to Mavericks is even easier since you can completely erase the Mac first.
In any event let the download complete.
If this raises any concerns about installing it, and you need to ask questions to alleviate those concerns, you can just close this window when it eventually appears:
The 5 GB downloaded file will not be deleted and will remain available until you actually install Mavericks. You can do that at any time convenient for you.

My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

Have a look here...
what-to-do-when-your-hard-drive-is-full.html

Cisco SPA525g2 Date and time Not Synced with the PBX server

Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,

PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

My daq 6008 wil not drop the 5V after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside

my daq 6008 wil not drop the 5V on a digital output after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside, but i can t seemto get it to work

i attached the block diagram so you can have a look
Attachments:
PID Temp control.docx ‏120 KB

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Java.sql.Date and java.util.Date - class loaded first in the classpath

I had two jar files which has java.util.Date and java.sql.Date class file. i want to know whether which class is loaded first in the classpath...
I like to change the order of loading the class at runtime...
Is there is any way to change the order of loading of class...
I may have different version of jar files for example xerces,xercesImpl. some of the code uses xerces ,some of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according to the order i need..
Can we do all these in Run time ?????

I had two jar files which has java.util.Date and
java.sql.Date class file. i want to know whether
which class is loaded first in the classpath...
I like to change the order of loading the class at
runtime...
Is there is any way to change the order of loading of
class...
I may have different version of jar files for example
xerces,xercesImpl. some of the code uses xerces ,some
of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according
to the order i need..
Can we do all these in Run time ?????That is meaningless.
The classes you are referring to are part of the Java API. Third party jars have no impact on that. And you can't change to the order because java.sql.Data is derived from java.util.Date. So the second must load before the first.
And if you have two jar files with those classes in them (and not classes that use them) then you either should already know how to use them or you should stop trying to do whatever you are doing because it isn't going to work.

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

Don't tell us, tell them
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback

How due date for the invoice can be a backward date

Hi
How due date for the invoice can be a backward date as billing date in future.
Pinky

Hi,
Please elaborate on your problem.
regards,
Siddharth.

IPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

iPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

Create a new account (systempreferences -> accounts or Users & Groups on 10.7) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

The invoice date and the paymant date showing the same

Similar Messages

Maybe you are looking for