The IOS 6 update tweaked my volume control and Itunes does not play?
The IOS 6 update tweaked my volume control and Itunes does not play on my Iphone 4? Should I wipe the Iphone clean.
i would give it a try
Similar Messages
-
HT4623 iOS 6 update on iphone 5 failed now itunes does not find my phone
I have been seeing some distubing things about this update and this is of course after i have had the current problem. long and the short of it using my MAC i was able to update my ipad no issues but when doing my phone it got most of the way through and then failed to complete. the phone is stuck on the usb/itunes screen and itunes on the mac no longer finds the phone. FYI enven on my PC as a longshot to at least get the phone working it is not recognized there either................
NOW WHAT..................... any and all help welcomeHey mfrouns,
Thanks for the question. It sounds like your iPhone is not recognized in iTunes when connected to your computer. To troubleshoot this issue, see the relevant article for your operating system:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thanks,
Matt M. -
I downloaded the iOS 7 update on my iPad 2 and I hate it! It has messed up many things. Can I go back to iOS 6?
Sorry but Apple doesn't support downgrading.
There are a few things you can do to help change the appearance. You can go to settings, general, accessibility and adjust the contrast, text size, bold the text. You can also adjust the brightness in the control panel. Maybe this will make it a little better looking for you. -
I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?
I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
Otherwise I´ll go to the Genius Bar to do a checkup.
Good luck!
It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode. This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content. -
I updated my macbook with lion and airdrop does not show up in the finder, how could this be?
shldr2thewheel wrote:
If this is the case: How to enable AirDrop over ethernet and AirDrop on unsupported macs running Lion .
http://osxdaily.com/2011/09/16/enable-airdrop-ethernet-and-unsupported-macs/
Interesting. Googling, I see that someone posted that on these discussions as well:
https://discussions.apple.com/thread/3331216?start=0&tstart=0
which mentions what I recall: that Airdrop (as implemented by Apple) would create an on-demand ad-hoc Wi-Fi connection, even if you were already connected to an access point. Normally, you can't connect to multiple Wi-Fi networks, thus the reason for Airdrop only supported on newer Wi-Fi chips.
And Apple's KB:
http://support.apple.com/kb/HT4783 -
After updating itunes on my pc, I get the error message "MSVCR80.dll is missing." Reinstalling itunes does not help.
MSVCR is Microsoft Virtual Creator. It's an MS dirivitive of Java.
Try running Windows Update, and see: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ msvcr80dll-problem/e5e1ae2f-f109-4bde-af20-ebcb7244fb5c
for more info. -
Updated to Windows 8.1 and ITunes will not recognize the nano 6th generatio IPod
Updated to Windows 8.1 and ITunes will not recognize the nano 6th geneartion IPod. I tried all the things that was listed on troubleshooting. Help
Did you ever get help for this? I use the radio feature often and now it will not play, since updating to Windows 8.1.
-
I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.
You can't activate any GSM iPhone without a valid sim card installed in the phone.
So, yes, you need to get a sim card. -
After downloading iOS 6 ipod is flashing apple and itunes does not recognize
I tried to download the new iOS 6 for my ipod and now the screen is just white when I tried to reboot it, now it flashes the apple and white screen and itunes does not recognize it. help?? it is only 8 mos old
- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store. -
in my macbook pro sees in the screen very wide a vertical black bar and it does not let see what this underneath that bar
Take it in for service. Your screen probably needs to be replaced.
-
I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
I dropped my iphone 4 pretty hard, it cracked (although it already had a few cracks in it) and now the screen is black but sometimes has a background light turn on and then off. Holding the home button and off button at the same time do not work. When I plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not seem to recognize it. It gets really really hot when plugged in (which I don't think is normal). icloud does not recognize it under "find my iphone" either. What could the problem be? I am wondering if dropping it dislodged something inside. if so, what did I dislodge and is it possible to fix this myself?
ThanksSounds like that drop was a critical one, my friend. I would make an appointment at your nearest Apple Retail Store, because you're going to need a replacement. Also as a side note: the reason that the charger is making the phone vibrate over and over is because there is a disconnect somewhere in the charge port of the phone, causing it to plug in and out over and over.
-
I need to change my country and itunes does not allow me because I have 0.20 left to spend. I can't purchase any more credit because I'm not in the US any more and Itunes just accept those. I need help!
Click here and request assistance.
(65879) -
I have a 2nd gen shuffle. I bought a new USB for it at the apple store last week. They said it would work with the the 2nd Gen shuffle. I have the shuffle plugged in to the computer now. It wont light up and itunes is not reconizing it. Please help!
I would bring it back to the Apple Store and have them test it out on one of their one machines to see if it'll work or not there.
B-rock -
hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?
You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
i am using jdk1.3.1_02 java webserver2.0 and internet explorer 6.0 i am trying a servlet sample from "Java Servlet programming" of OREILLY .it contains a html form(one text field and one command button).i entered my name in text field and after click
-
Using Time Capsule without it being a router
I Have a Time Capsule connected to my Mac Mini (OS X 10.8.3) by ethernet cable, but not connected to my cable modem. I have an existing wireless network and wish to continue using that. I have the Time Capsule working okay for auto back-ups but every
-
When I try to connect my iPad, I get this message: iTunes could not connect to this iPad. An unknown error occurred (0xE800000A)
-
Acrobat 7.0 ayuda con la conexion a SQL
Buenas la presente es a ver quien me hace el favor y me ayuda en cuanto al nuevo Adobe 7.0 en el designer con la conexion a SQL mi problema es el siguiente: Creo un Drop-Down List le hago la conexion pero me da el siguiente error al ejecutarlo: "conn
-
Hi, I am updating(or Insert) database table in a user - Exit, using MODIFY statement. On a particualr date, they have created 100 documents. But, in that 96 documents are inserted into the Custom data base table. But, 4 documents are not inserted. S