The ios 7 update-maybe error?

I updated my iPhone 5 to ios 7 today and when it was done,
it went into recovery mode. Well, I didn't want my phone getting resets so
I "backed it up" but there were barely no data in my phone.
I need to recover all of the contacts and emails since I use my phone for
working purpose (business). Is there any ways to recover my phone?
I have my iPad right now so there won't be that much trouble, but
I take it with me all the time. Please, any solutions?

The servers are probably overloaded with everyone trying to update to iOS 7 today. You might need to wait and try again later. You can also try restarting and resetting (Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.) your phone if it doesn't show up.

Similar Messages

The iOS update methods I use for error free updates

I hope this helps some folks. I am not saying this is the 100% tried and true method but I have upgraded quite a few iPhones and never experienced an error or issue upgrading the software when following below method.
1) If iOS 4 or greater, double-tap Home button to bring up running app list and hold first app to get jiggling and kill all apps one at a time until task bar is blank.
2) Put iPhone into Airplane mode. (this will ensure that an incoming phone call, text message or push message won't interrupt the update)
3) Do a graceful power-off by holding Top sleep button until red "slide to power off" then slide to power phone off and allow phone to fully shut down.
4) Now press and hold Top sleep button and Home button at same time and continue holding both. The phone will begin to boot and you will see Apple logo but while continuing to hold both buttons the Apple logo will eventually go away and phone will seem to power back off but KEEP HOLDING BOTH BUTTONS and phone will power up again and Apple logo will popup again. KEEP HOLDING BOTH BUTTONS and phone will power down for good this time. When you release both buttons the phone should stay powered off. If phone begins to boot/power up when releasing buttons, you have not held them long enough. (Note: This power off/reboot sequence is very handy to remember for when your iPhone starts acting weird.)
5) Press Top sleep button to turn phone back ON.
6) Hook to your computer and Sync with iTunes and also create a Backup of phone in iTunes.
7) Now update your phone with the iOS update and it should run smoothly.
Thanks goes out to "TITNTUFF" for suggesting the Airplane Mode.

The method i use is this, every new update apple comes out with, i always DFU mode my iphone, and do a clean install of the iOS. This to ensure that I don't get any problems when updating my iphone. I have done this all previous models and never had any issues.
DFU will take some time but for me it's worth it. Airplane mode is a good way to this.

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

TS3694 I tried to download the ios updates yesterday morning and not my phone will not work. I get a screen the appears to instruct me t connect t I Tunes. When I do that I received a message telling me that i need to restore factory settings. when I try

I tried to download the ios updates and now my phone will not work. I receive a screen that instruct me to connect to itunes. When I connect to itunes, i am told that i must restore factory settings. When i attempt to restore factory settings, i receive an error message that an unknown error has occured (3194)

There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

When i plug my phone into itunes for the ios update, it downloads but then says it cant connect to the server. How do i get my update?

When i plug my phone into itunes for the ios update, it downloads but then says it cant connect to the server. How do i get my update?

Here are Apple Steps for Error 21:
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
My additional advice:
Also Error 21 can occur with DFU Mode Restore, try Recovery Mode Restore. Restart computer. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Click Restore button of iTunes.

How do I fix the album art on my iPod? It has been scrabbled due to the iOS update.

My iPod touch 5th generation has had two problems come up since the iOS update; I regret updating because I was happy with how it was before. The album art has been scrabbled on my iPod; it has placed album art that goes with other songs to the wrong song or has album art I've never seen before. My iPod also has a problem with music now. I've noticed that I am unable to play music that I once could. Some have an iCloud or stop symbol next to it and I can not listen to them. I notice that while it plays my music on shuffle, while looking at the screen and song, it will skip through about 2-5 or more songs as if it's not allowed to play it. I am very irratated with these problems. Everything was all dandy before these updates. Any feedback would be very helpful and I thank you.

Artwork doesn't sync with music in ipod...: Apple Support Communities
next try
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Trying to update my iPhone 4 from iOS 5.1.1 to 6.1 via iTunes.When I click the "Update" button, I just get a message saying the iTunes is at the current version (6.1), but no action re the iOS update.

I'm trying to update my iPhone 4 from iOS 5.1.1 to 6.1. When I try to do this using iTunes on my MacBook Pro (OS X v 10.5.8), with my iPhone in its cradle, clicking the "Update" button in Tunes gets a message saying "This version of iTunes (10.6.1) is the current version." I can't get the iOS update to download.
When I try to update to the iPhone directly, I get a message saying "iOS 6.0.1 failed verification because you are no longer connected to the Internet" at the Verifying Update step. I noticed that this message refers to iOS 6.0.1, even though I want to update to 6.1. It is possible that, a few weeks ago, I may have downloaded but not installed v 6.0.1.
Thanks for any help with this problem

I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback.

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

I deleted my music through the "manage storage" section in the options to make room for the ios update awhile back. Now I can't get any music back onto my device through itunes. (I've tried restoring the device twice to no avail)

I deleted my music through the "manage storage" section in the options to make room for the ios update awhile back. Now I can't get any music back onto my device through itunes. (I've tried restoring the device twice to no avail)

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Apple Configurator Could not refresh the ios update catalog

I tried to open up apple configurator today and it's giving me an arror saying "Could not refresh the iOS update catalog. The store's response could not be parsed." I have no idea how to even start troubleshooting this. any tips?

This is an annoying problem. I have phones and pads that I have to release for the Corporate world. I thought macs/apple were supposed to be perfect .
Any Fixes or responses to this as a potential iTunes problem.
Is this an iTunes to server conn problem or would this be a problem with the software to iTunes programming?

HT4623 I completed the ios update but now my contact information is missing?

I completed the ios update but now my contact information is missing?

Your contacts will be in whatever program you have chosen to sync.

Where do you get the ios update

Where do you find the iOS update?

iTunes will automatically get the iOS firmware for your iPhone.
You can always download iOS from Apple directly.
Here is the iOS 5.1.1 for iPhone 4S directly from Apple Server:
http://appldnld.apple.com/iOS5.1.1/041-4346.20120427.1RuDG/iPhone4,1_5.1.1_9B206 _Restore.ipsw

My phone is kind of froze after the ios update.. what do i do?

I did the IOS update that it prompted me to do and it shut itself off and was restarting and took forever so i shut it off and now i try to turn it back on and it keeps flashing the apple logo but wont turn back on... It wont charge or sync to my computer... any ideas??

Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
if no result
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

HT4539 How do ypu perform the "IOS update" required to get ringtones on my cell?

How do I perform the "IOS update" required to get ringtones on my cell? I can't figure it out through the ITunes store....

Welcome to the Apple community.
If an update is available for your device, connect it to iTunes and use the update feature.
However, you do not need to update your device in order to use ringtones. Simply select the ringtones you wish to sync to your device from the Tones tab in iTunes on your computer when your device is connected to it, and perform a sync.

HT4623 I'm no longer able to take video on my iPad mini this happened after one of the iOS updates

I'm no longer able to take video with my iPad mini this happened after one of the iOS updates. How can this be fixed?

Try sliding the words up/down to select the various modes.

Itunes has frozen during the ios update

my phone and itunes has frozen during the ios update. how do i resolve this?

Hello LAUANS01,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device issues:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

The ios 7 update-maybe error?

Similar Messages

Maybe you are looking for