The IOS5 download seems to be conflicting with my IPAD2 wifi connection.
I have downloaded the IOS5 upgrade to my IPAD2. Since then I have had difficulty with the Ipad connecting to the wifi. Every time I manually get it connected to wifi the wifi will disconnect with my other devices such as my Iphone. I have tried just about everything and nothing works. Any ideas?
I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.
Similar Messages
-
What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out?
The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/ -
Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?
You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card -
I can not get the ios5 downloaded on my ipod it is a32 gb
I can not get the ios5 downloaded on my ipod it is a 32gb wher do i go to get the download
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models -
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??
You have a "good WiFi connection". What does that mean exactly? Can you send and receive email and are other internet related activities working OK for you? Have you tried restarting or rebooting your iPad? Sometimes that helps. If nothing else, it's a good place to start.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
supposedly you can download or play songs using the icloud download button, a cloud icon with a downward arrow inside. But nothing happens when I click or double click on it.
You have to have music in your iCloud account to do that...when you open the Music app on your iPad, for example, you can access all music from iCloud that you have already placed in the iCloud or associated with iCloud. That is not for downloading music you have not already purchased or downloaded.
-
Why does the download start again for the start. I only hve access to a 3G wifi connection so one tv episode had cost me about $10 I'm download costs because of several interruptions. Is there a way to change that?
Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.
-
Since I downloaded ios7 on my iPhone 5 I have not been able to access the internet at all when I am away from a wifi connection.
Is Cellular Data turned ON? See Settings > Cellular Data.
-
Whilst synching to my PC it said there was a software update for the iPhone.
It is now stuck with a message saying connect to iTunes. I've tried resetting it in various ways but it still comes back to Connect to iTunes, but it won't.
Help!See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
hi, is it possible to download apps using itunes because we dont have wifi connection, we only have an internet service connected to the PC.
There are some steps on this page for syncing a device (the page talks about iPhones, but it would work for iPads as well) to a new computer : Syncing to a "New" Computer or replacing a "crashed" Hard Drive.
When you connect an iPad to a computer's iTunes for the first time it might give you two options, to replace what is currently on the iPad with what is in that computer's iTunes library, or to set it up as a new device (i.e. remove all content from it) - hopefully the above page will get around that.
You should be able to use different computers to update the iOS version and to sync content (can you not use the same computer ?), but you will probably have to do the above for both.
If you don't currently have anything on the iPad that you don't mind losing (have you downloaded apps or other content when you've had access to wifi e.g. in shops, other people's homes ; or got any documents etc on it) then you don't need to go through the steps on that page. -
Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.
When this problem first happened, I searched for threads and found a few. See be;ow links:
http://support.apple.com/kb/TS1502
Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version. -
The colour swatch 'black' has a conflict with the current document?
I have created some graphic styles and saved them as the manual explains.
When using them in a new document I keep getting the conflict window asking if I wish to merge swatches.
What have I done to keep getting this unwanted conflict message?Yeah, *real* annoying. This is something new. It didn't happen before in CS5, at least not to me and I always work with global colors.
Example:
No matter what object, no matter what color (even without any color!), upon paste I get the merge dialog: The color swatch "K=30" has a conflict with the current document.
When I delete the swatch and then cut something (not having that color) I get: The color swatch "Deleted Global Color" has a conflict with the current document.
Does anyone have a solution to this problem?
This is driving me nuts. -
Thunderbird PC conflicting with Android Pad when connected home
With Thunderbird running on PC and android Pad running in another room also connected to my email account (Pad doesn't have Thundrbird as we all know) . Every so often Thunderbird will not connect to email provider and ask for password. Which does not work.
Provider checked out my PC and finds that Thunderbird it has a conflict with devices and will not access provider. Pad has no problem at all but the Pad is the conflict device
Is there any way of configuring Thunderbird so it does not see the Pad as a conflicting device.
Almost makes me want to go back to explorer as it does not let this happen.
Surely it cannot be that hard to port a simpler Thunderbird for androids and stop this problem of conflict as I want to stay with Thunderbird
ThanksYou may try to increase the interval how often both, Thunderbird and your tablet are checking for new mail.
Otherwise I don't see what kind of conflict your provider may be suspecting. When the problem happens only every once in a while, it sounds more like a provider issue. And it seems your provider folks don't have a clue about Thunderbird.
''Provider tells me that Explorer does not let this happen.''
Are you talking about webmail? That's would be a completely different thing.
''Surely it cannot be that hard to port a simpler Thunderbird for android''
You wouldn't believe how hard.
http://quetzalcoatal.blogspot.de/2013/09/why-email-is-hard-part-1-architecture.html -
Our remote site has a 3845 router running MPLS to connect back to our other 3845 locally. The ISP has provided us a layer 2 sonet connection with no other configurations necessary with the exception of configuring the layer 2 portion on our side. Both of these 3845 routers are in "server mode" with "no vtp domain" specified. Will this cause an issue/conflict when the remote router bypasses the MPLS for the faster 100MB layer 2 connection?
Jon,
Excellent answer. Our two 3845 routers are about 400 miles away and we're trying to bring up a layer 2 100MB sonet connection over fiber connected to the GIG0/1 port on each router. I was worried that essentially having these 2 routers back to back over layer 2 may cause issues since our remote site has a higher revision number than our local site. It appears since we're configuring an ip address on each router and then adding the network to ospf this shouldn't conflict with our 2 routers. Below is how each router VTP is configured with the exception our remote site has 1 extra VLAN and a higher revision number.
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 68
Number of existing VLANs : 5
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Enabled
MD5 digest : 0xBF 0x86 0x94 0x45 0xFC 0xDF 0xB5 0x70
Maybe you are looking for
-
Hello, can anyone tell me how to share my home macbook pro to my imac in the office? I tried file sharing but never worked for me...appreciate if anyone can help!
-
My click wheel has frozen on my nano
I have had my nano for two days and the click wheel froze randomly when I put a song on pause....I reset it a billion times and nothing happened so I am now restoring it but it is taking forever how long is it supposed to take? Is there anything else
-
Error in function module for inbound processingwhile testing from we19
hi, I have developed a custom function module for processing inbound idoc for creating material using bdc...the problem is that when i am trying to test my idoc using we19 and calling my function module in debug mode an error is displayed showing 'in
-
Implementing Security through forms/Reports
Hi I have an application Developed in Forms.I have set of End users, who connect thru this application . I want to protect them from connecting to database apart from this application. ie. Thry should not access data thru SQLPLUS(Client), XLS (using
-
Java.io.NotSerializableException when trying to invoke java class Business Operations in studio
According to WLI docs, the Java Class Business Operations doesn't need to be Serializeable. But somehow everytime I try to invoke the Busines Operations in studio, It always throws me exception : java.io.NotSerializableException. Is it something wron